view target-utils/calversion/dsp_const.h @ 619:f82551c77e58

libserial-newlnx: ASYNC_LOW_LATENCY patch reverted Reports from Das Signal indicate that loadtools performance on Debian is about the same as on Slackware, and that including or omitting the ASYNC_LOW_LATENCY patch from Serg makes no difference. Because the patch in question does not appear to be necessary, it is being reverted until and unless someone other than Serg reports an actual real-world system on which loadtools operation times are slowed compared to the Mother's Slackware reference and on which Slackware-like performance can be restored by setting the ASYNC_LOW_LATENCY flag.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 27 Feb 2020 01:09:48 +0000
parents 1dcc9e4b71fd
children
line wrap: on
line source

/*
 * This header file is a subset of l1_const.h from TCS211, defining
 * those constants which are needed for the DSP bring-up code in
 * the dsp_bringup.c module.
 */

#define NO_PAR                0

#define NO_TASK               0
#define ALL_TASK              0xffffffff
#define ALL_PARAM             0xffffffff

#define TRUE                  1
#define TRUE_L                1L
#define FALSE                 0

#define NOT_PENDING           0
#define PENDING               1

#define INACTIVE              2
#define ACTIVE                3
#define RE_ENTERED            4
#define WAIT_IQ               5

//---------------------------------------------
// MCU-DSP bit-field bit position definitions
//---------------------------------------------
#define GPRS_SCHEDULER       1  // Select GPRS scheduler
#define GSM_SCHEDULER        2  // Select GSM  scheduler

// DSP state need to be used to enter Deep Sleep mode
#define C_DSP_IDLE3           3

#define SC_CHKSUM_VER     (DB_W_PAGE_0 + (2 * (0x08DB - 0x800)))

// ****************************************************************
// PARAMETER AREA (PARAM) MCU<->DSP COMMUNICATION DEFINITIONS
// ****************************************************************
#define C_POND_RED              1L
#define D_NSUBB_IDLE            296L
#define D_NSUBB_DEDIC           30L
#define D_FB_THR_DET_IACQ       0x3333L
#define D_FB_THR_DET_TRACK      0x28f6L
#define D_DC_OFF_THRES          0x7fffL
#define D_DUMMY_THRES           17408L
#define D_DEM_POND_GEWL         26624L
#define D_DEM_POND_RED          20152L
#define D_HOLE                  0L
#define D_TRANSFER_RATE         0x6666L

// Full Rate vocoder definitions.
#define D_MACCTHRESH1           7872L
#define D_MLDT                  -4L
#define D_MACCTHRESH            7872L
#define D_GU                    5772L
#define D_GO                    7872L
#define D_ATTMAX                53L
#define D_SM                    -892L
#define D_B                     208L
#define D_SD_MIN_THR_TCHFS      15L                   //(24L   *C_POND_RED)
#define D_MA_MIN_THR_TCHFS      738L                  //(1200L *C_POND_RED)
#define D_MD_MAX_THR_TCHFS      1700L                 //(2000L *C_POND_RED)
#define D_MD1_MAX_THR_TCHFS     99L                   //(160L  *C_POND_RED)

// Frequency burst definitions
#define D_FB_MARGIN_BEG         24
#define D_FB_MARGIN_END         22

// V42bis definitions
#define D_V42B_SWITCH_HYST      16L
#define D_V42B_SWITCH_MIN       64L
#define D_V42B_SWITCH_MAX       250L
#define D_V42B_RESET_DELAY      10L

#define D_LAT_MCU_BRIDGE        0x000FL

#define D_LAT_MCU_HOM2SAM       0x000CL

#define D_LAT_MCU_BEF_FAST_ACCESS 0x0005L
#define D_LAT_DSP_AFTER_SAM     0x0004L

// Background Task in GSM mode: Initialization.
#define D_GSM_BGD_MGT           0L

#define D_MISC_CONFIG           1L

// Half Rate vocoder and ched definitions.

#define D_SD_MIN_THR_TCHHS      37L
#define D_MA_MIN_THR_TCHHS      344L
#define D_MD_MAX_THR_TCHHS      2175L
#define D_MD1_MAX_THR_TCHHS     138L
#define D_SD_AV_THR_TCHHS       1845L
#define D_WED_FIL_TC            0x7c00L
#define D_WED_FIL_INI           4650L
#define D_X_MIN                 15L
#define D_X_MAX                 23L
#define D_Y_MIN                 703L
#define D_Y_MAX                 2460L
#define D_SLOPE                 135L
#define D_WED_DIFF_THRESHOLD    406L
#define D_MABFI_MIN_THR_TCHHS   5320L
#define D_LDT_HR                -5
#define D_MACCTRESH_HR          6500
#define D_MACCTRESH1_HR         6500
#define D_GU_HR                 2620
#define D_GO_HR                 3700
#define D_B_HR                  182
#define D_SM_HR                 -1608
#define D_ATTMAX_HR             53

// Enhanced Full Rate vocoder and ched definitions.

#define C_MLDT_EFR              -4
#define C_MACCTHRESH_EFR        8000
#define C_MACCTHRESH1_EFR       8000
#define C_GU_EFR                4522
#define C_GO_EFR                6500
#define C_B_EFR                 174
#define C_SM_EFR                -878
#define C_ATTMAX_EFR            53
#define D_SD_MIN_THR_TCHEFS     15L                   //(24L   *C_POND_RED)
#define D_MA_MIN_THR_TCHEFS     738L                  //(1200L *C_POND_RED)
#define D_MD_MAX_THR_TCHEFS     1230L                 //(2000L *C_POND_RED)
#define D_MD1_MAX_THR_TCHEFS    99L                   //(160L  *C_POND_RED)

// Integrated Data Services definitions.
#define D_MAX_OVSPD_UL          8
// Detect frames containing 90% of 1s as synchro frames
#define D_SYNC_THRES            0x3f50
// IDLE frames are only frames with 100 % of 1s
#define D_IDLE_THRES            0x4000
#define D_M1_THRES              5
#define D_MAX_OVSP_DL           8

#define D_FACCH_THR             0
#define D_DSP_TEST              0
#define D_VERSION_NUMBER        0
#define D_TI_VERSION            0

//  DSP ADRESSES
//--------------------

#define DB_SIZE                 (4*20L)     // 4 pages of 20 words...

#define DB_W_PAGE_0          0xFFD00000L   // DB page 0 write : 20 words long
#define DB_W_PAGE_1          0xFFD00028L   // DB page 1 write : 20 words long
#define DB_R_PAGE_0          0xFFD00050L   // DB page 0 read  : 20 words long
#define DB_R_PAGE_1          0xFFD00078L   // DB page 1 read  : 20 words long
#define NDB_ADR              0xFFD001A8L   // NDB start address : 268 words
#define PARAM_ADR            0xFFD00862L   // PARAM start address  : 57 words

#define DB2_R_PAGE_0       0xFFD00184L
#define DB2_R_PAGE_1       0xFFD00188L