FreeCalypso > hg > freecalypso-tools
view target-utils/tf-breakin/payload.S @ 619:f82551c77e58
libserial-newlnx: ASYNC_LOW_LATENCY patch reverted
Reports from Das Signal indicate that loadtools performance on Debian
is about the same as on Slackware, and that including or omitting the
ASYNC_LOW_LATENCY patch from Serg makes no difference. Because the
patch in question does not appear to be necessary, it is being reverted
until and unless someone other than Serg reports an actual real-world
system on which loadtools operation times are slowed compared to the
Mother's Slackware reference and on which Slackware-like performance
can be restored by setting the ASYNC_LOW_LATENCY flag.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 27 Feb 2020 01:09:48 +0000 |
| parents | e7502631a0f9 |
| children |
line wrap: on
line source
.text .org 0 @ allow entry in Thumb state .code 16 bx pc nop .code 32 @ set CPSR like mot931c payload does msr CPSR_c, #0xd3 @ disable the watchdog ldr r1, =0xfffff802 mov r0, #0xf5 strh r0, [r1, #2] mov r0, #0xa0 strh r0, [r1, #2] @ MODEM UART ldr r6, =0xffff5800 @ wait for any previous output to flush out 1: ldrb r0, [r6, #5] tst r0, #0x20 beq 1b @ send our indication adr r1, outstr mov r2, #6 1: ldrb r0, [r1], #1 strb r0, [r6] subs r2, r2, #1 bne 1b @ wait for this output to go out to the TxD pin 1: ldrb r0, [r6, #5] tst r0, #0x40 beq 1b @ enable the Calypso boot ROM ldr r1, =0xFFFFFB10 mov r2, #0x0100 strh r2, [r1] @ jump to it! mov pc, #0 .ltorg outstr: .byte 2,2,2,'O','K',2