FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/gen8.config @ 661:fd7b447b99e3
libserial rename
The version that was previously named libserial-newlnx is now libserial-linux,
and the version that was previosly named libserial-orig is now libserial-posix.
This new naming is more in line with the objective reality of the difference,
moving away from naming based on our project history.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 05 Mar 2020 19:54:31 +0000 |
parents | 641d816b1e91 |
children |
line wrap: on
line source
# This config is meant to be applicable to most "generic" or "vanilla" # Calypso devices with just the following properties expected: # # * Calypso chip is C035, meaning it's ok to run the PLL at 104 MHz # and give 52 MHz to the ARM7; # * There is one flash bank on nCS0 and one XRAM bank on nCS1; # * 8 MiB flash chip may be present, thus ADD22 needs to be enabled. # The following parameters go into the <p command sent to the boot ROM pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz rhea-cntl 0x00 # good for all Calypso platforms # The remaining settings are carried out via loadagent commands init-script basic-4ws-8mb.init # Flash configuration flash single-8M 0x03000000 # Perform a Iota poweroff when we are done exit-mode iota-off