FreeCalypso > hg > freecalypso-tools
view miscutil/srec-regions.c @ 1014:961efadd530a default tip
fc-shell TCH DL handler: add support for CSD modes
TCH DL capture mechanism in FC Tourmaline firmware has been extended
to support CSD modes in addition to speech - add the necessary support
on the host tools side.
It needs to be noted that this mechanism in its present state does NOT
provide the debug utility value that was sought: as we learned only
after the code was implemented, TI's DSP has a misfeature in that the
buffer we are reading (a_dd_0[]) is zeroed out when the IDS block
is enabled, i.e., we are reading all zeros and not the real DL bits
we were after. But since the code has already been written, we are
keeping it - perhaps we can do some tests with IDS disabled.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 26 Nov 2024 06:27:43 +0000 |
parents | 7ef3343161d6 |
children |
line wrap: on
line source
/* * This program parses an S-record file (TI's *.m0 or otherwise), identifies * the set of discontiguous regions into which this SREC image deposits bits, * and lists these identified regions. */ #include <sys/types.h> #include <stdio.h> #include <ctype.h> #include <string.h> #include <strings.h> #include <stdlib.h> char *infname; FILE *inf; char srecbuf[1024]; u_char srecbin[256]; int lineno, state; u_long region_start, region_end; decode_hex_byte(s) char *s; { register int u, l; if (!isxdigit(s[0]) || !isxdigit(s[1])) return(-1); if (isdigit(s[0])) u = s[0] - '0'; else if (isupper(s[0])) u = s[0] - 'A' + 10; else u = s[0] - 'a' + 10; if (isdigit(s[1])) l = s[1] - '0'; else if (isupper(s[1])) l = s[1] - 'A' + 10; else l = s[1] - 'a' + 10; return((u << 4) | l); } srec2bin() { register int i, l, b; l = decode_hex_byte(srecbuf + 2); if (l < 1) { fprintf(stderr, "%s line %d: S-record length octet is bad\n", infname, lineno); exit(1); } srecbin[0] = l; for (i = 1; i <= l; i++) { b = decode_hex_byte(srecbuf + i*2 + 2); if (b < 0) { fprintf(stderr, "%s line %d: hex decode error\n", infname, lineno); exit(1); } srecbin[i] = b; } return(0); } srec_cksum() { u_char accum; register int i, len; len = srecbin[0] + 1; accum = 0; for (i = 0; i < len; i++) accum += srecbin[i]; if (accum != 0xFF) { fprintf(stderr, "%s line %d: bad checksum\n", infname, lineno); exit(1); } return(0); } main(argc, argv) char **argv; { register int i; u_long curaddr; int datalen; if (argc != 2) { fprintf(stderr, "usage: %s image.m0\n", argv[0]); exit(1); } infname = argv[1]; inf = fopen(infname, "r"); if (!inf) { perror(infname); exit(1); } state = 0; for (lineno = 1; ; lineno++) { if (!fgets(srecbuf, sizeof srecbuf, inf)) { fprintf(stderr, "%s: premature EOF\n", infname); exit(1); } if (srecbuf[0] != 'S') { fprintf(stderr, "%s line %d: not an S-record\n", infname, lineno); exit(1); } switch (srecbuf[1]) { case '0': if (state == 0) break; else goto badtype; case '3': if (state == 0) goto badtype; else break; case '7': if (state == 2) break; else goto badtype; default: badtype: fprintf(stderr, "%s line %d: S-record type unexpected\n", infname, lineno); exit(1); } srec2bin(); srec_cksum(); switch (srecbuf[1]) { case '0': state = 1; continue; case '3': if (srecbin[0] < 6) { fprintf(stderr, "%s line %d: S3 record is too short\n", infname, lineno); exit(1); } curaddr = (srecbin[1] << 24) | (srecbin[2] << 16) | (srecbin[3] << 8) | srecbin[4]; datalen = srecbin[0] - 5; if (state < 2) { region_start = curaddr; region_end = curaddr + datalen; state = 2; continue; } if (curaddr != region_end) { printf("0x%08lX to 0x%08lX (%lu bytes)\n", region_start, region_end, region_end - region_start); region_start = curaddr; } region_end = curaddr + datalen; continue; case '7': if (srecbin[0] < 5) { fprintf(stderr, "%s line %d: S7 record is too short\n", infname, lineno); exit(1); } printf("0x%08lX to 0x%08lX (%lu bytes)\n", region_start, region_end, region_end - region_start); printf("S7 address 0x%02X%02X%02X%02X\n", srecbin[1], srecbin[2], srecbin[3], srecbin[4]); exit(0); default: abort(); } } }