FreeCalypso > hg > freecalypso-tools
view rvinterf/include/bsim_etm_cmd.h @ 1014:961efadd530a default tip
fc-shell TCH DL handler: add support for CSD modes
TCH DL capture mechanism in FC Tourmaline firmware has been extended
to support CSD modes in addition to speech - add the necessary support
on the host tools side.
It needs to be noted that this mechanism in its present state does NOT
provide the debug utility value that was sought: as we learned only
after the code was implemented, TI's DSP has a misfeature in that the
buffer we are reading (a_dd_0[]) is zeroed out when the IDS block
is enabled, i.e., we are reading all zeros and not the real DL bits
we were after. But since the code has already been written, we are
keeping it - perhaps we can do some tests with IDS disabled.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 26 Nov 2024 06:27:43 +0000 |
| parents | bc1e150f5bd9 |
| children |
line wrap: on
line source
/* * This header file defines ETM commands that can be sent from a * development host to FCHG operating in BSIM mode. */ #ifndef __BSIM_ETM_CMD_H #define __BSIM_ETM_CMD_H /* ETM_BSIM command opcodes */ #define BSIM_CMD_QUERY 0x00 #define BSIM_CMD_DISCHARGE 0x01 /* 1 byte with battery % follows */ #define BSIM_CMD_CHG_START 0x02 #define BSIM_CMD_CHG_CI2CV 0x03 #define BSIM_CMD_CHG_COMPLETE 0x04 #define BSIM_CMD_SET_ICHG 0x05 /* 2 bytes of Ichg value follow */ #define BSIM_CMD_START_ENABLE 0x06 /* 1 byte with flag follows */ /* status response codes */ #define BSIM_STAT_OK 0x00 #define BSIM_ERR_BAD_CMD 0x02 #define BSIM_ERR_WRONG_STATE 0x03 #define BSIM_ERR_INV_PERCENT 0x04 #define BSIM_ERR_INV_DISCHARGE 0x05 #endif /* include guard */