view target-utils/buzplayer/cmdtab.c @ 1014:961efadd530a default tip

fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 26 Nov 2024 06:27:43 +0000
parents 9092ff68e37d
children
line wrap: on
line source

#include "cmdtab.h"

extern void cmd_abbr();
extern void cmd_abbw();
extern void cmd_baud_switch();
extern void cmd_buz();
extern void cmd_buzlev();
extern void cmd_bzt();
extern void cmd_jump();
extern void cmd_pwt();
extern void cmd_r8();
extern void cmd_r16();
extern void cmd_r32();
extern void cmd_w8();
extern void cmd_w16();
extern void cmd_w32();

extern void abb_init();
extern void abb_power_off();
extern void abb_unlock_page2();

extern void melody_init();
extern void melody_init_pwt();
extern void melody_entry();
extern void melody_play();
extern void pwt_entry_note();
extern void pwt_entry_rest();

const struct cmdtab cmdtab[] = {
	{"E", melody_entry},
	{"EP", pwt_entry_rest},
	{"ET", pwt_entry_note},
	{"I", melody_init},
	{"IT", melody_init_pwt},
	{"P", melody_play},
	{"abbinit", abb_init},
	{"abbpage2", abb_unlock_page2},
	{"abbr", cmd_abbr},
	{"abbw", cmd_abbw},
	{"baud", cmd_baud_switch},
	{"buz", cmd_buz},
	{"buzlev", cmd_buzlev},
	{"bzt", cmd_bzt},
	{"jump", cmd_jump},
	{"poweroff", abb_power_off},
	{"pwt", cmd_pwt},
	{"r8", cmd_r8},
	{"r16", cmd_r16},
	{"r32", cmd_r32},
	{"w8", cmd_w8},
	{"w16", cmd_w16},
	{"w32", cmd_w32},
	{0, 0}
};