FreeCalypso > hg > freecalypso-tools
view target-utils/tf-breakin/payload.S @ 1014:961efadd530a default tip
fc-shell TCH DL handler: add support for CSD modes
TCH DL capture mechanism in FC Tourmaline firmware has been extended
to support CSD modes in addition to speech - add the necessary support
on the host tools side.
It needs to be noted that this mechanism in its present state does NOT
provide the debug utility value that was sought: as we learned only
after the code was implemented, TI's DSP has a misfeature in that the
buffer we are reading (a_dd_0[]) is zeroed out when the IDS block
is enabled, i.e., we are reading all zeros and not the real DL bits
we were after. But since the code has already been written, we are
keeping it - perhaps we can do some tests with IDS disabled.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 26 Nov 2024 06:27:43 +0000 |
| parents | e7502631a0f9 |
| children |
line wrap: on
line source
.text .org 0 @ allow entry in Thumb state .code 16 bx pc nop .code 32 @ set CPSR like mot931c payload does msr CPSR_c, #0xd3 @ disable the watchdog ldr r1, =0xfffff802 mov r0, #0xf5 strh r0, [r1, #2] mov r0, #0xa0 strh r0, [r1, #2] @ MODEM UART ldr r6, =0xffff5800 @ wait for any previous output to flush out 1: ldrb r0, [r6, #5] tst r0, #0x20 beq 1b @ send our indication adr r1, outstr mov r2, #6 1: ldrb r0, [r1], #1 strb r0, [r6] subs r2, r2, #1 bne 1b @ wait for this output to go out to the TxD pin 1: ldrb r0, [r6, #5] tst r0, #0x40 beq 1b @ enable the Calypso boot ROM ldr r1, =0xFFFFFB10 mov r2, #0x0100 strh r2, [r1] @ jump to it! mov pc, #0 .ltorg outstr: .byte 2,2,2,'O','K',2