view uptools/libcoding/grokdcs.c @ 1014:961efadd530a default tip

fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 26 Nov 2024 06:27:43 +0000
parents 097ce8431d11
children
line wrap: on
line source

/*
 * This library module implements the function that distills the complex
 * set of possible SMS DCS octet values to just one of 4 possibilities:
 * 7-bit text (7), 8-bit data octets (8), UCS-2 text (16) or compressed
 * data (9).
 *
 * The decoding is based on the 3GPP TS 23.038 V11.0.0 spec;
 * reserved encodings are treated as 7-bit text as the spec instructs.
 */

sms_dcs_classify(dcs)
{
	if (!(dcs & 0x80)) {
		if (dcs & 0x20)
			return(9);
		switch (dcs & 0xC) {
		case 0:
			return(7);
		case 4:
			return(8);
		case 8:
			return(16);
		default:
			/* reserved, treating as 7-bit per the spec */
			return(7);
		}
	}
	switch (dcs & 0xF0) {
	case 0x80:
	case 0x90:
	case 0xA0:
	case 0xB0:
		/* reserved, treating as 7-bit per the spec */
		return(7);
	case 0xC0:
	case 0xD0:
		return(7);
	case 0xE0:
		return(16);
	case 0xF0:
		if (dcs & 4)
			return(8);
		else
			return(7);
	}
}