view uptools/libcoding/gsm7_decode.c @ 1014:961efadd530a default tip

fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 26 Nov 2024 06:27:43 +0000
parents 30fbaa652ea5
children
line wrap: on
line source

/*
 * This library module implements the decoding of GSM7-encoded data
 * into ASCII, ISO 8859-1 or UTF-8.
 */

#include <sys/types.h>
#include <stdio.h>

extern u_short gsm7_decode_table[128];
extern u_short gsm7ext_decode_table[128];

gsm7_to_ascii_or_ext(inbuf, inlen, outbuf, outlenp, ascii_ext, newline_ok)
	u_char *inbuf, *outbuf;
	unsigned inlen, *outlenp;
{
	u_char *inp, *endp, *outp;
	unsigned gsm, uni;
	int is_ext;

	inp = inbuf;
	endp = inbuf + inlen;
	outp = outbuf;
	while (inp < endp) {
		gsm = *inp++;
		if (gsm == 0x1B && inp < endp && *inp != 0x1B && *inp != '\n'
		    && *inp != '\r') {
			gsm = *inp++;
			uni = gsm7ext_decode_table[gsm];
			if (uni == '\\') {
				*outp++ = '\\';
				*outp++ = '\\';
				continue;
			}
			if (uni == 0x20AC && ascii_ext < 2) {
				*outp++ = '\\';
				*outp++ = 'E';
				continue;
			}
			is_ext = 1;
		} else {
			switch (gsm) {
			case 0x1B:
				*outp++ = '\\';
				*outp++ = 'e';
				continue;
			case '\n':
				if (newline_ok)
					*outp++ = '\n';
				else {
					*outp++ = '\\';
					*outp++ = 'n';
				}
				continue;
			case '\r':
				*outp++ = '\\';
				*outp++ = 'r';
				continue;
			}
			uni = gsm7_decode_table[gsm];
			is_ext = 0;
		}
		if (!uni || !is_decoded_char_ok(uni, ascii_ext)) {
			if (is_ext) {
				*outp++ = '\\';
				*outp++ = 'e';
			}
			sprintf(outp, "\\%02X", gsm);
			outp += 3;
		} else if (ascii_ext == 2)
			outp += emit_utf8_char(uni, outp);
		else
			*outp++ = uni;
	}
	*outp = '\0';
	if (outlenp)
		*outlenp = outp - outbuf;
}