FreeCalypso > hg > freecalypso-tools
graph
-
rvinterf/etmsync converted to use libinterfSat, 27 Oct 2018 23:39:57 +0000, by Mychaela Falconia
-
rvinterf client refactoring: libinterf createdSat, 27 Oct 2018 23:35:10 +0000, by Mychaela Falconia
-
CHANGES: FCDEV3B S/N 001 bug support removalFri, 26 Oct 2018 07:29:50 +0000, by Mychaela Falconia
-
doc/Flash-boot-modes article removed (moved to freecalypso-docs)Fri, 26 Oct 2018 07:13:35 +0000, by Mychaela Falconia
-
doc/Flash-boot-defect article removed (no longer relevant)Fri, 26 Oct 2018 07:11:08 +0000, by Mychaela Falconia
-
target-utils/Makefile: flash-boot-wa hack removed from the basic setFri, 26 Oct 2018 07:03:21 +0000, by Mychaela Falconia
-
CHANGES: mokosrec2bin addition and documentation updatesThu, 25 Oct 2018 19:51:47 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: mokosrec2bin addition documentedThu, 25 Oct 2018 19:33:16 +0000, by Mychaela Falconia
-
mokosrec2bin utility imported from the old freecalypso-reveng tree,Thu, 25 Oct 2018 19:23:35 +0000, by Mychaela Falconia
-
INSTALL: updates regarding the ARM7 gcc toolchainThu, 25 Oct 2018 18:40:10 +0000, by Mychaela Falconia
-
loadtools/loadtool.help: update for FC devices having flash2Thu, 25 Oct 2018 18:19:02 +0000, by Mychaela Falconia
-
CHANGES: typo fixFri, 07 Sep 2018 20:43:47 +0000, by Mychaela Falconia
-
CHANGES: fcup-* minor fixes documentedSat, 11 Aug 2018 22:36:26 +0000, by Mychaela Falconia
-
fcup-settime: moved time() retrieval a little closer to the outputSat, 11 Aug 2018 21:52:17 +0000, by Mychaela Falconia
-
fcup-smdump: set AT+CSCS="IRA" at the end (don't leave HEX)Sat, 11 Aug 2018 19:43:44 +0000, by Mychaela Falconia
-
fcup-smsend: fixed bug in the handling of -W with no dest address argumentSat, 11 Aug 2018 18:59:54 +0000, by Mychaela Falconia
-
CHANGES: fc-host-tools-r8 is outSun, 18 Mar 2018 18:40:41 +0000, by Mychaela Falconia
-
CHANGES: target-utils Tx FIFO change documentedSun, 18 Mar 2018 08:55:28 +0000, by Mychaela Falconia
-
doc/RF_tables: typo fixSun, 18 Mar 2018 08:37:23 +0000, by Mychaela Falconia
-
target-utils: wait for FIFO not full in serial_out() instead of FIFO emptySun, 18 Mar 2018 07:22:26 +0000, by Mychaela Falconia
-
CHANGES: fc-shell key command addition documentedFri, 16 Mar 2018 01:59:34 +0000, by Mychaela Falconia
-
fc-shell help file: documented key, keydown and keyup commandsFri, 16 Mar 2018 01:47:08 +0000, by Mychaela Falconia
-
fc-shell: added key commands for sending keystrokes via MMI CONFIG sysprimsFri, 16 Mar 2018 00:52:40 +0000, by Mychaela Falconia
-
INSTALL: update for the move-out of fc-lcdemuThu, 15 Mar 2018 04:59:32 +0000, by Mychaela Falconia
-
CHANGES: fc-lcdemu move-out and rvinterf -X output inversion fixThu, 15 Mar 2018 01:16:17 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: update for the move-out of fc-lcdemuThu, 15 Mar 2018 00:58:39 +0000, by Mychaela Falconia
-
rvinterf: -v option removed, -X LCD output is always invertedThu, 15 Mar 2018 00:41:24 +0000, by Mychaela Falconia
-
lcdemu removed from this repository, moved to freecalypso-ui-devThu, 15 Mar 2018 00:36:07 +0000, by Mychaela Falconia
-
fc-fsio help: write-battery-table and write-charging-config documentedSun, 11 Mar 2018 23:24:52 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: documented new additionsSun, 11 Mar 2018 18:20:00 +0000, by Mychaela Falconia
-
README: updated for the new set of top-level source directoriesSun, 11 Mar 2018 17:39:53 +0000, by Mychaela Falconia
-
CHANGES: User Phone Tools addition documentedSun, 11 Mar 2018 17:04:10 +0000, by Mychaela Falconia
-
doc/User-phone-tools article writtenSun, 11 Mar 2018 06:32:00 +0000, by Mychaela Falconia
-
fcup-settime program written, compiles, produces expected AT+CCLK commandSat, 10 Mar 2018 00:46:03 +0000, by Mychaela Falconia
-
sms-pdu-decode: added -p option to keep the raw PDUs in the outputFri, 09 Mar 2018 22:15:43 +0000, by Mychaela Falconia
-
fcup-smwrite program written, compilesFri, 09 Mar 2018 20:43:53 +0000, by Mychaela Falconia
-
fcup-smsendpdu program written, compilesFri, 09 Mar 2018 03:29:40 +0000, by Mychaela Falconia
-
fcup-smsendmult: UCS-2 send mode implementedFri, 09 Mar 2018 02:56:09 +0000, by Mychaela Falconia
-
fcup-smsendmult: preparations for adding UCS-2 supportFri, 09 Mar 2018 02:48:41 +0000, by Mychaela Falconia
-
fcup-smsend: UCS-2 send mode implementedFri, 09 Mar 2018 02:31:15 +0000, by Mychaela Falconia
-
fcup-smsend: preparations for adding UCS-2 supportFri, 09 Mar 2018 00:43:36 +0000, by Mychaela Falconia
-
uptools/atcmd: smsend_pdugen.c split off from smsend_pduout.cFri, 09 Mar 2018 00:27:24 +0000, by Mychaela Falconia
-
uptools/atcmd/smsend_pduout.c: added UCS-2 function, some refactoringFri, 09 Mar 2018 00:17:13 +0000, by Mychaela Falconia
-
uptools/libcoding: added function for UCS-2 BE outputThu, 08 Mar 2018 23:59:42 +0000, by Mychaela Falconia
-
uptools/libcoding: added function for turning UTF-8 into UCS-2Thu, 08 Mar 2018 23:06:31 +0000, by Mychaela Falconia
-
uptools/libcoding: added function for generating SMS PDUs with 8-bit textThu, 08 Mar 2018 22:24:14 +0000, by Mychaela Falconia
-
uptools: make_sms_submit_pdu() in libcoding now takes PID and DCS argumentsThu, 08 Mar 2018 20:33:03 +0000, by Mychaela Falconia
-
fcup-smsendmult program written, compilesThu, 08 Mar 2018 19:47:40 +0000, by Mychaela Falconia
-
uptools/atcmd: smsend_pdu.c renamed to smsend_pduout.cThu, 08 Mar 2018 18:13:38 +0000, by Mychaela Falconia
-
fcup-smsend: automatic -q (concat quiet) with -WThu, 08 Mar 2018 17:57:36 +0000, by Mychaela Falconia
-
fcup-smsend: implemented automatic concat SMS refno generationThu, 08 Mar 2018 17:47:58 +0000, by Mychaela Falconia
-
fcup-smsend: implemented -q option to suppress concat summary outputThu, 08 Mar 2018 16:41:57 +0000, by Mychaela Falconia
-
fcup-smsend: implemented concat SMS sending with user-given refnoThu, 08 Mar 2018 16:28:26 +0000, by Mychaela Falconia
-
fcup-smsend: prep for adding concat SMS supportThu, 08 Mar 2018 07:27:45 +0000, by Mychaela Falconia
-
uptools/atcmd: smsend_basic.c renamed to smsend_main.cThu, 08 Mar 2018 07:09:37 +0000, by Mychaela Falconia
-
fcup-smsend: added support for multiline messages in default PDU send modeThu, 08 Mar 2018 07:04:06 +0000, by Mychaela Falconia
-
fcup-smdump & fcup-smsend: send AT+CMEE=2 firstThu, 08 Mar 2018 00:20:42 +0000, by Mychaela Falconia
-
fcup-smsend: buglet in PDU mode length manipulationsMon, 05 Mar 2018 02:58:13 +0000, by Mychaela Falconia
-
fcup-smsend program put together, compilesMon, 05 Mar 2018 01:47:18 +0000, by Mychaela Falconia
-
uptools/libcoding: implemented function for generating hex stringsSun, 04 Mar 2018 23:11:51 +0000, by Mychaela Falconia
-
uptools/libcoding: implemented generation of SMS-SUBMIT PDUsSun, 04 Mar 2018 06:24:36 +0000, by Mychaela Falconia
-
uptools/libcoding/gsm7_encode.c: bug found on reviewSun, 04 Mar 2018 05:16:34 +0000, by Mychaela Falconia
-
uptools/libcoding: SMS dest address parsing and encoding implementedWed, 07 Feb 2018 07:30:22 +0000, by Mychaela Falconia
-
uptools/libcoding: septet to octet packing function implementedWed, 07 Feb 2018 06:50:14 +0000, by Mychaela Falconia
-
uptools/libcoding: implemented 8859-1 -> GSM7 encoding functionTue, 06 Feb 2018 20:18:43 +0000, by Mychaela Falconia
-
uptools/libcoding: implemented 8859-1 -> GSM7 encoding tableTue, 06 Feb 2018 19:27:19 +0000, by Mychaela Falconia
-
uptools/libcoding: UTF-8 input conversion to 8859-1 implementedMon, 05 Feb 2018 19:01:27 +0000, by Mychaela Falconia
-
fcup-smdump: -d delete-after-dump option implementedMon, 05 Feb 2018 17:35:49 +0000, by Mychaela Falconia
-
fcup-smdump implemented, compilesMon, 05 Feb 2018 08:47:45 +0000, by Mychaela Falconia
-
uptools/atcmd/atinterf.c: no target debug mode implementedSun, 04 Feb 2018 18:44:41 +0000, by Mychaela Falconia
-
uptools/atcmd/atinterf.c: logic inversion errorSun, 04 Feb 2018 18:41:44 +0000, by Mychaela Falconia
-
uptools/Makefile: atcmd addedSun, 04 Feb 2018 18:39:39 +0000, by Mychaela Falconia
-
uptools/atcmd framework startedSun, 04 Feb 2018 18:38:20 +0000, by Mychaela Falconia
-
rvinterf/Makefile: rvtat addedSun, 04 Feb 2018 17:05:35 +0000, by Mychaela Falconia
-
fcup-rvtat program written, compilesSun, 04 Feb 2018 16:45:05 +0000, by Mychaela Falconia
-
fcup-atinterf: implemented wakeup of sleeping targetsSun, 04 Feb 2018 16:05:11 +0000, by Mychaela Falconia
-
fcup-atinterf: brown paper bagSun, 04 Feb 2018 08:23:54 +0000, by Mychaela Falconia
-
top Makefile: uptools need libserial for atinterfSun, 04 Feb 2018 07:58:04 +0000, by Mychaela Falconia
-
uptools/Makefile: atinterf addedSun, 04 Feb 2018 07:57:06 +0000, by Mychaela Falconia
-
fcup-atinterf program written, compilesSun, 04 Feb 2018 07:56:21 +0000, by Mychaela Falconia
-
top Makefile: uptools subdirectory addedSun, 04 Feb 2018 06:20:55 +0000, by Mychaela Falconia
-
sms-pdu-decode: fixed bug in the decoding of From/To address fieldsSun, 04 Feb 2018 06:19:33 +0000, by Mychaela Falconia
-
uptools/Makefile createdSun, 04 Feb 2018 06:05:04 +0000, by Mychaela Falconia
-
sms-pdu-decode main program written, compilesSun, 04 Feb 2018 03:32:24 +0000, by Mychaela Falconia
-
uptools/libcoding: hex dump function implementedSun, 04 Feb 2018 01:03:20 +0000, by Mychaela Falconia
-
uptools/libcoding: SMS DCS decoding implementedSun, 04 Feb 2018 00:43:14 +0000, by Mychaela Falconia
-
uptools/libcoding: GSM timestamp decoding implementedSun, 04 Feb 2018 00:01:37 +0000, by Mychaela Falconia
-
uptools/libcoding: alphabetic address handling implementedSat, 03 Feb 2018 23:53:20 +0000, by Mychaela Falconia
-
uptools/libcoding: SC address decoding implementedSat, 03 Feb 2018 22:57:45 +0000, by Mychaela Falconia
-
uptools/libcoding: digit decoding implementedSat, 03 Feb 2018 22:41:20 +0000, by Mychaela Falconia
-
uptools/libcoding: 7-bit decoding implementedSat, 03 Feb 2018 22:21:15 +0000, by Mychaela Falconia
-
uptools/libcoding: hex line decoding implementedSat, 03 Feb 2018 20:37:14 +0000, by Mychaela Falconia
-
uptools started with libcodingSat, 03 Feb 2018 20:07:05 +0000, by Mychaela Falconia
-
CHANGES: fc-loadtool D-Sample fix documentedSat, 20 Jan 2018 05:39:27 +0000, by Mychaela Falconia
-
loadtools/scripts/dsample.config: use the new 28f640w30b chip typeSat, 20 Jan 2018 05:22:54 +0000, by Mychaela Falconia
-
fc-loadtool: support for 28F640W30B flash chip with partition quirksSat, 20 Jan 2018 05:20:40 +0000, by Mychaela Falconia
-
compile-fc-chg: changes for FCHG v2Fri, 29 Dec 2017 20:38:39 +0000, by Mychaela Falconia
-
fc-tmsync: added pirelli-vbat-cal command to read Pirelli's ADC calibrationMon, 18 Dec 2017 21:00:46 +0000, by Mychaela Falconia
-
CHANGES: documented fc-fsio additionsSun, 17 Dec 2017 03:41:05 +0000, by Mychaela Falconia
-
fc-fsio: implemented write-battery-table and write-charging-config commandsSun, 17 Dec 2017 03:31:54 +0000, by Mychaela Falconia
-
compile-fc-chg tool written, compilesSun, 17 Dec 2017 02:25:05 +0000, by Mychaela Falconia
-
ffstools/Makefile: newcomp added to SUBDIRSun, 17 Dec 2017 00:59:53 +0000, by Mychaela Falconia
-
compile-fc-batt tool written, compilesSun, 17 Dec 2017 00:57:42 +0000, by Mychaela Falconia
-
CHANGES: fc-tmsh auw-fir command addition documentedWed, 22 Nov 2017 19:15:29 +0000, by Mychaela Falconia
-
fc-tmsh: auw-fir command implementedWed, 22 Nov 2017 19:08:38 +0000, by Mychaela Falconia
-
librftab: implemented reading of FIR coefficient tablesWed, 22 Nov 2017 18:52:47 +0000, by Mychaela Falconia
-
librftab: reading of Tx ramp template files split from rftablerd moduleWed, 22 Nov 2017 18:12:04 +0000, by Mychaela Falconia
-
fc-fsio help: upload-rf-table addition documentedWed, 22 Nov 2017 06:23:52 +0000, by Mychaela Falconia
-
CHANGES: c1xx-calextr and RF table changes documentedWed, 22 Nov 2017 05:46:28 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: fc-tmsync documentedWed, 22 Nov 2017 05:20:57 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: fc-readcal documentedWed, 22 Nov 2017 05:03:15 +0000, by Mychaela Falconia
-
doc/RF_tables: updated for the newly implemented more complete supportWed, 22 Nov 2017 04:49:29 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: fc-cal2bin documentedWed, 22 Nov 2017 04:47:36 +0000, by Mychaela Falconia
-
fc-fsio upload-rf-table implementedTue, 21 Nov 2017 06:48:44 +0000, by Mychaela Falconia
-
fc-fsio: write_buf_to_file() function made global in prep for upload-rf-tableTue, 21 Nov 2017 06:09:35 +0000, by Mychaela Falconia
-
doc/Compal-calibration: fc-readcal failed approach documentedMon, 20 Nov 2017 17:51:23 +0000, by Mychaela Falconia
-
doc/Compal-calibration: c1xx-calextr handles Rx calchan nowMon, 20 Nov 2017 16:24:22 +0000, by Mychaela Falconia
-
c1xx-calextr: Rx calchan conversion implementedMon, 20 Nov 2017 06:10:54 +0000, by Mychaela Falconia
-
doc/Compal-calibration: Rx calchan ranges documentedSun, 19 Nov 2017 23:10:07 +0000, by Mychaela Falconia
-
c1xx-calextr: preparations for Rx calchan conversionSun, 19 Nov 2017 22:37:16 +0000, by Mychaela Falconia
-
started documenting c1xx-calextrSun, 19 Nov 2017 21:45:12 +0000, by Mychaela Falconia
-
c1xx-calextr: off-by-1 error in the Tx levels table conversionSat, 18 Nov 2017 18:02:42 +0000, by Mychaela Falconia
-
c1xx-calextr: output implementedSat, 18 Nov 2017 17:58:35 +0000, by Mychaela Falconia
-
c1xx-calextr: table conversion implementedSat, 18 Nov 2017 17:45:10 +0000, by Mychaela Falconia
-
c1xx-calextr: preparations for both ASCII and binary outputSat, 18 Nov 2017 17:30:26 +0000, by Mychaela Falconia
-
c1xx-calextr will need mkdir and librftabSat, 18 Nov 2017 17:15:54 +0000, by Mychaela Falconia
-
c1xx-calextr startedSat, 18 Nov 2017 17:12:20 +0000, by Mychaela Falconia
-
ffstools/Makefile: caltools added to SUBDIRSat, 18 Nov 2017 07:39:23 +0000, by Mychaela Falconia
-
fc-cal2bin written, compilesSat, 18 Nov 2017 07:38:36 +0000, by Mychaela Falconia
-
fc-tmsync: ttr-all implementedSat, 18 Nov 2017 06:47:38 +0000, by Mychaela Falconia
-
fc-tmsync: rftr save to file implementedSat, 18 Nov 2017 06:35:13 +0000, by Mychaela Falconia
-
fc-cal2text changed to emit Tx ramps for each band as a single tableSat, 18 Nov 2017 02:01:57 +0000, by Mychaela Falconia
-
rvinterf/tmsh: old rftable{rd,wr}.c deleted (moved to librftab)Sat, 18 Nov 2017 01:13:03 +0000, by Mychaela Falconia
-
fc-tmsh converted to link with librftabSat, 18 Nov 2017 00:32:16 +0000, by Mychaela Falconia
-
fc-tmsync converted to link with librftabSat, 18 Nov 2017 00:26:24 +0000, by Mychaela Falconia
-
fc-cal2text converted to link with librftabSat, 18 Nov 2017 00:20:36 +0000, by Mychaela Falconia
-
librftab added to top Makefile as dependency for ffstools and rvinterfSat, 18 Nov 2017 00:06:34 +0000, by Mychaela Falconia
-
librftab reader: implemented reading of Tx ramps tablesSat, 18 Nov 2017 00:01:31 +0000, by Mychaela Falconia
-
librftab writer: added function to write Tx ramps tablesFri, 17 Nov 2017 23:48:49 +0000, by Mychaela Falconia
-
librftab compilesFri, 17 Nov 2017 23:46:27 +0000, by Mychaela Falconia
-
librftab started with rftablerd.c and rftablewr.c from rvinterf/tmshFri, 17 Nov 2017 23:43:38 +0000, by Mychaela Falconia
-
fc-readcal: fixed bug in the shifting of afcdacFri, 17 Nov 2017 04:38:11 +0000, by Mychaela Falconia
-
fc-readcal written, compilesFri, 17 Nov 2017 01:22:06 +0000, by Mychaela Falconia
-
etmsync l1tmops module: need to return on errors, not exitFri, 17 Nov 2017 00:37:52 +0000, by Mychaela Falconia
-
etmsync: host_mkdir() function factored out of fc-fsioFri, 17 Nov 2017 00:26:09 +0000, by Mychaela Falconia
-
fc-tmsync: missed newline at the end of rfpr outputFri, 17 Nov 2017 00:03:21 +0000, by Mychaela Falconia
-
fc-tmsync: L1TM operation commands hooked inThu, 16 Nov 2017 23:44:48 +0000, by Mychaela Falconia
-
fc-tmsync: user command wrappers implementedThu, 16 Nov 2017 23:33:50 +0000, by Mychaela Falconia
-
etmsync l1tmops module: ttr implementedThu, 16 Nov 2017 19:26:24 +0000, by Mychaela Falconia
-
etmsync l1tmops module: rfpr implementedThu, 16 Nov 2017 19:14:52 +0000, by Mychaela Falconia
-
etmsync: l1tmops module compiles and links into fc-tmsyncThu, 16 Nov 2017 19:00:05 +0000, by Mychaela Falconia
-
fc-tmsync skeleton startedThu, 16 Nov 2017 18:43:52 +0000, by Mychaela Falconia
-
CHANGES: fc-fsio pirelli-magnetite-init change documentedThu, 16 Nov 2017 04:41:39 +0000, by Mychaela Falconia
-
fc-fsio pirelli-magnetite-init: added /gsm/rf/afcdac record missed earlierThu, 16 Nov 2017 04:35:05 +0000, by Mychaela Falconia
-
CHANGES: removal of ffstools/aud-fcdev3b is the first post-r7 changeFri, 20 Oct 2017 03:58:13 +0000, by Mychaela Falconia
-
.hgignore: removed the entries for ffstools/aud-*Fri, 20 Oct 2017 03:41:30 +0000, by Mychaela Falconia
-
ffstools/aud-fcdev3b removed: migrated to the new fc-audio-config repositoryFri, 20 Oct 2017 03:40:25 +0000, by Mychaela Falconia
-
CHANGES: fc-host-tools-r7 releasedFri, 29 Sep 2017 01:04:54 +0000, by Mychaela Falconia
-
INSTALL: libserial and Linux specifics documentedThu, 28 Sep 2017 18:53:34 +0000, by Mychaela Falconia
-
doc/Audio-mode-config: typo fixThu, 28 Sep 2017 17:51:17 +0000, by Mychaela Falconia
-
CHANGES: added pointer to doc/High-speed-serial in the serial change blurbThu, 28 Sep 2017 08:02:03 +0000, by Mychaela Falconia
-
linux-2.6.37.6-ftdi_sio.c.patch moved from doc to oldThu, 28 Sep 2017 07:55:58 +0000, by Mychaela Falconia
-
doc/High-speed-serial: update/rewrite for the new FTDI supportThu, 28 Sep 2017 07:53:50 +0000, by Mychaela Falconia
-
CHANGES: libserial change documentedFri, 22 Sep 2017 22:36:13 +0000, by Mychaela Falconia
-
libserial-newlnx is now the new official libserialFri, 22 Sep 2017 22:04:38 +0000, by Mychaela Falconia
-
libserial-newlnx: new way implemented, compilesFri, 22 Sep 2017 00:19:41 +0000, by Mychaela Falconia
-
beginning of libserial-newlnx: copy of libserial-origFri, 22 Sep 2017 00:09:37 +0000, by Mychaela Falconia
-
rvinterf and friends converted to use libserialThu, 21 Sep 2017 23:45:05 +0000, by Mychaela Falconia
-
set_serial_nonblock() added to libserialThu, 21 Sep 2017 23:30:53 +0000, by Mychaela Falconia
-
fc-serterm converted to use libserialThu, 21 Sep 2017 23:25:02 +0000, by Mychaela Falconia
-
loadtools reworked to use factored-out libserialThu, 21 Sep 2017 23:07:01 +0000, by Mychaela Falconia
-
libserial hooked into the top level MakefileThu, 21 Sep 2017 21:49:07 +0000, by Mychaela Falconia
-
beginning of factored-out libserialThu, 21 Sep 2017 21:43:34 +0000, by Mychaela Falconia
-
doc/Audio-mode-config: fixed logic error in the description of extra-gainThu, 21 Sep 2017 20:04:12 +0000, by Mychaela Falconia
-
tiaud-compile: max FIR coefficient number is 30, not 31Sat, 26 Aug 2017 05:17:49 +0000, by Mychaela Falconia
-
doc/Audio-mode-config writtenSat, 26 Aug 2017 04:50:25 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: tiaud-compile and tiaud-mkvol documentedSat, 26 Aug 2017 01:34:40 +0000, by Mychaela Falconia
-
CHANGES: first changes since fc-host-tools-r6Sat, 26 Aug 2017 01:23:34 +0000, by Mychaela Falconia
-
ffstools/aud-fcdev3b: created some audio config tables for FCDEV3BSat, 26 Aug 2017 01:07:16 +0000, by Mychaela Falconia
-
tiaud-mkvol program writtenFri, 25 Aug 2017 23:57:32 +0000, by Mychaela Falconia
-
tiaud-compile program writtenFri, 25 Aug 2017 23:36:07 +0000, by Mychaela Falconia
-
CHANGES: fc-host-tools-r6 releasedMon, 21 Aug 2017 19:04:28 +0000, by Mychaela Falconia
-
CHANGES: exitcodes.h addition documentedSun, 20 Aug 2017 18:40:03 +0000, by Mychaela Falconia
-
rvinterf/include/exitcodes.h: added ERROR_RFFAIL for fc-rfcal-toolsSun, 20 Aug 2017 18:18:14 +0000, by Mychaela Falconia
-
doc/Loadtools-usage: fc-loadtool batch mode documentedSun, 20 Aug 2017 17:37:45 +0000, by Mychaela Falconia
-
fc-rfcal-tools now public, old frozen rfcal code can be removedThu, 17 Aug 2017 05:27:43 +0000, by Mychaela Falconia
-
CHANGES: fc-fsio format change documentedSat, 12 Aug 2017 17:37:02 +0000, by Mychaela Falconia
-
fc-fsio format command: don't stop scripts on NOPREFORMAT error,Sat, 12 Aug 2017 17:31:50 +0000, by Mychaela Falconia
-
fc-loadtool batch mode: added -B optionFri, 04 Aug 2017 08:06:36 +0000, by Mychaela Falconia
-
CHANGES: first changes since fc-host-tools-r5Thu, 03 Aug 2017 03:21:39 +0000, by Mychaela Falconia
-
fc-loadtool: automated command script mode implementedThu, 03 Aug 2017 02:12:56 +0000, by Mychaela Falconia
-
loadtools: preparations for loadtool exit code possibly being nonzeroThu, 03 Aug 2017 01:33:06 +0000, by Mychaela Falconia
-
loadtool.help: exec command description updatedThu, 03 Aug 2017 01:25:40 +0000, by Mychaela Falconia
-
fc-loadtool: exec command now looks for scripts in the current directoryThu, 03 Aug 2017 01:21:45 +0000, by Mychaela Falconia
-
loadtools and rvinterf: set TIOCEXCL on the ttyThu, 03 Aug 2017 00:37:59 +0000, by Mychaela Falconia
-
CHANGES: fc-host-tools-r5 releasedSat, 20 May 2017 22:53:22 +0000, by Mychaela Falconia
-
CHANGES: documented the addition of keepalive support to rvinterfSat, 20 May 2017 22:13:03 +0000, by Mychaela Falconia
-
doc/RVTMUX: keepalive mechanism documentedSat, 20 May 2017 22:05:46 +0000, by Mychaela Falconia
-
rvinterf: implemented keepalive mechanismSat, 20 May 2017 21:00:15 +0000, by Mychaela Falconia
-
rvinterf/Makefile: install include files in /opt/freecalypso/include/rvinterfSat, 20 May 2017 20:04:35 +0000, by Mychaela Falconia
-
rvinterf/include/exitcodes.h: added ERROR_RFTEST for use by autocal toolsSat, 20 May 2017 19:57:49 +0000, by Mychaela Falconia
-
rfcal migrationSat, 20 May 2017 19:43:49 +0000, by Mychaela Falconia
-
doc/TIFFS-IVA-usage updatedSat, 20 May 2017 18:28:34 +0000, by Mychaela Falconia
-
ffstools/README renamed to README.old,Sat, 20 May 2017 18:10:49 +0000, by Mychaela Falconia
-
doc/Host-tools-overview: updated and simplifiedSat, 20 May 2017 12:48:38 +0000, by Mychaela Falconia
-
doc/Loadtools-on-GTA0x article added, replacing the corresponding sectionFri, 19 May 2017 06:57:19 +0000, by Mychaela Falconia
-
loadtools/gta-ap-build.sed: don't build fc-compalram or fc-buzplay for GTA0x APFri, 19 May 2017 06:29:06 +0000, by Mychaela Falconia
-
loadtools/README renamed to README.old, previous README.old to README.olderFri, 19 May 2017 06:11:27 +0000, by Mychaela Falconia
-
INSTALL: added blurb about target binaries in packaged releasesFri, 19 May 2017 05:41:12 +0000, by Mychaela Falconia
-
README: minor updatesFri, 19 May 2017 00:31:54 +0000, by Mychaela Falconia
-
CHANGES: documented newly added utilitiesThu, 18 May 2017 23:32:31 +0000, by Mychaela Falconia
-
doc/Loadtools-usage: replacing loadtools/READMEThu, 18 May 2017 22:52:12 +0000, by Mychaela Falconia
-
INSTALL: cosmetic fix in bullet point numberingThu, 18 May 2017 07:24:07 +0000, by Mychaela Falconia
-
rfcal/Makefile: tsid-test added to SUBDIRSun, 14 May 2017 23:09:27 +0000, by Mychaela Falconia
-
fc-tsid-shell (fc-cmu200d development aid) writtenSun, 14 May 2017 00:34:23 +0000, by Mychaela Falconia
-
Flash-boot-defect and Flash-boot-modes documentationTue, 02 May 2017 03:24:30 +0000, by Mychaela Falconia
-
loadtools: second program invokation support added to fc-iram like in fc-xramMon, 01 May 2017 21:54:58 +0000, by Mychaela Falconia
-
target-utils/Makefile: flash-boot-wa addedMon, 01 May 2017 21:21:13 +0000, by Mychaela Falconia
-
target-utils/flash-boot-wa/Makefile: install addedMon, 01 May 2017 21:17:05 +0000, by Mychaela Falconia
-
target-utils/flash-boot-wa writtenMon, 01 May 2017 21:02:58 +0000, by Mychaela Falconia
-
target-utils/flash-boot-test: added UART init, needed for mode 1Mon, 01 May 2017 20:02:49 +0000, by Mychaela Falconia
-
target-utils/Makefile: flash-boot-test addedSun, 30 Apr 2017 17:45:21 +0000, by Mychaela Falconia
-
target-utils/flash-boot-test/main.c: indicate the mode/version in the bannerSun, 30 Apr 2017 17:42:40 +0000, by Mychaela Falconia
-
target-utils/flash-boot-test writtenSun, 30 Apr 2017 17:40:26 +0000, by Mychaela Falconia
-
fc-cmu200d: skeleton complete, ready to start adding meatMon, 24 Apr 2017 02:17:04 +0000, by Mychaela Falconia
-
fc-cmu200d: socket handling skeleton addedMon, 24 Apr 2017 01:43:02 +0000, by Mychaela Falconia
-
fc-cmu200d skeleton started, compilesMon, 24 Apr 2017 00:45:54 +0000, by Mychaela Falconia
-
doc/RF-cal/CMU200-notes: added signal generator commandsSun, 23 Apr 2017 22:39:45 +0000, by Mychaela Falconia
-
doc/RF-cal/Test-system-interface writtenSun, 23 Apr 2017 21:03:44 +0000, by Mychaela Falconia
-
doc/RF-cal/Architecture document writtenSun, 23 Apr 2017 18:01:17 +0000, by Mychaela Falconia
-
doc: RF calibration documents/notes moved into RF-cal subdirSun, 23 Apr 2017 16:47:50 +0000, by Mychaela Falconia
-
doc/CMU200-notes startedSun, 23 Apr 2017 16:42:43 +0000, by Mychaela Falconia
-
rfcal/Makefile: added cmu200 subdirSun, 23 Apr 2017 02:15:25 +0000, by Mychaela Falconia
-
fc-serscpi utility written, compilesSun, 23 Apr 2017 00:51:01 +0000, by Mychaela Falconia
-
doc/VCXO_calibration writtenFri, 14 Apr 2017 07:45:57 +0000, by Mychaela Falconia
-
fc-vcxo-param: use M_PI constant instead of acos(-1.0)Thu, 13 Apr 2017 05:13:45 +0000, by Mychaela Falconia
-
fc-vcxo-param: bug in lin_b2 computationThu, 13 Apr 2017 04:58:58 +0000, by Mychaela Falconia
-
rfcal/vcxo-manual hooked into the make hierarchyWed, 12 Apr 2017 07:37:26 +0000, by Mychaela Falconia
-
manual VCXO calibration code: fc-vcxo-param utility writtenWed, 12 Apr 2017 07:33:38 +0000, by Mychaela Falconia
-
started manual VCXO calibration code: fc-vcxo-linear utility writtenWed, 12 Apr 2017 06:45:45 +0000, by Mychaela Falconia