2019-05-28 |
Mychaela Falconia |
loadtools/flashid.c: added alt ID for 28F320C3T equiv in Mot C139
|
2019-05-28 |
Mychaela Falconia |
loadtools/scripts/pirelli.config: iota-off exit mode is better than jump0
|
2019-05-28 |
Mychaela Falconia |
loadtools/scripts/*.config: new flash config
|
2019-05-28 |
Mychaela Falconia |
new flash geom command made a little nicer
|
2019-05-28 |
Mychaela Falconia |
new flash support works for PL129N on the Pirelli
|
2019-05-28 |
Mychaela Falconia |
fc-loadtool flash support overhaul
|
2019-05-27 |
Mychaela Falconia |
fc-loadtool flash ID check: change of reset after the check logic
|
2019-05-27 |
Mychaela Falconia |
CHANGES: overall target-utils clean-up documented
|
2019-05-27 |
Mychaela Falconia |
c139explore: osmo_delay_ms-ectomy and GPIO init fix
|
2019-05-27 |
Mychaela Falconia |
pirexplore SPCA552E init delays changed from bogo-ms to true ms
|
2019-05-27 |
Mychaela Falconia |
CHANGES: target-utils poweroff VRPCAUX addition documented
|
2019-05-25 |
Mychaela Falconia |
target-utils: poweroff command does VRPCAUX cleanup for nTESTRESET
|
2019-05-25 |
Mychaela Falconia |
target-utils: added support for secret register page 2 of Iota ABB
|
2019-05-25 |
Mychaela Falconia |
calversion utility: removed osmo_delay_ms()
|
2019-05-25 |
Mychaela Falconia |
target-utils: added 10 ms delay at the end of abb_power_off()
|
2019-05-25 |
Mychaela Falconia |
target-utils: removed osmo_delay_ms() from ABB access code
|
2019-05-25 |
Mychaela Falconia |
target-utils: wait_ARM_cycles() changed to 4 cycles per loop
|
2019-05-24 |
Mychaela Falconia |
CHANGES: Mot C155/156 WS=4 change documented
|
2019-05-24 |
Mychaela Falconia |
loadtools/scripts/c155.init: WS=4 setting matching official fw
|
2019-05-24 |
Mychaela Falconia |
loadtools/scripts/compal.init: updated comments for new understanding
|
2019-05-22 |
Mychaela Falconia |
CHANGES stanza about watchdog commands in flash-boot-test:
|
2019-05-21 |
Mychaela Falconia |
target-utils/flash-boot-test: more watchdog experimentation commands
|
2019-05-21 |
Mychaela Falconia |
CHANGES: flash-boot-test watchdog disable command documented
|
2019-05-21 |
Mychaela Falconia |
target-utils/flash-boot-test: added wd (watchdog disable) command
|
2019-04-13 |
Mychaela Falconia |
doc/Compal-FFS: typo fix
|
2019-03-15 |
Mychaela Falconia |
CHANGES: fc-bin2rftab addition documented
|
2019-03-15 |
Mychaela Falconia |
doc/Host-tools-overview: fc-bin2rftab addition documented
|
2019-03-15 |
Mychaela Falconia |
fc-bin2rftab utility written
|
2019-03-07 |
Mychaela Falconia |
CHANGES: first changes since fc-host-tools-r10
|
2019-03-07 |
Mychaela Falconia |
doc updates for Compal FFS
|
2019-03-06 |
Mychaela Falconia |
doc/Compal-calibration: update for SE J100 being the same as Mot C1xx
|
2019-03-06 |
Mychaela Falconia |
doc/Loadtools-usage: SE J100 documented
|
2019-02-14 |
Mychaela Falconia |
Makefile hierarchy: CFLAGS override-ability actually works now
|
2019-02-13 |
Mychaela Falconia |
CHANGES: fc-host-tools-r10 released
|
2019-02-13 |
Mychaela Falconia |
target-utils/*/Makefile: better construct for crt0.S symlink
|
2019-02-13 |
Mychaela Falconia |
target-utils/calversion/crt0.S: symlink was checked in erroneously,
|
2019-02-13 |
Mychaela Falconia |
CHANGES and INSTALL: staged install ability documented
|
2019-02-13 |
Mychaela Falconia |
target-utils/Makefile: INSTALL_PREFIX= scheme implemented
|
2019-02-13 |
Mychaela Falconia |
main tree Makefile hierarchy: INSTALL_PREFIX= scheme implemented
|
2019-02-12 |
Mychaela Falconia |
CHANGES: CC= and CFLAGS= override-ability documented
|
2019-02-12 |
Mychaela Falconia |
Makefile hierarchy: allow CC and CFLAGS to be overridden from the top
|
2019-02-12 |
Mychaela Falconia |
rvinterf tree Makefiles: split CPPFLAGS from CFLAGS
|
2019-02-11 |
Mychaela Falconia |
CHANGES: null pointer passing fixes documented
|
2019-02-11 |
Mychaela Falconia |
sms-pdu-decode: null pointer passing fixes
|
2019-02-11 |
Mychaela Falconia |
uptools/atcmd: null pointer passing fixes
|
2019-02-11 |
Mychaela Falconia |
ffstools/caltools: null pointer passing fixes
|
2019-02-11 |
Mychaela Falconia |
rvinterf/etmsync/fsnew.c: cast 0 to (char *) for execl sentinel
|
2019-02-10 |
Mychaela Falconia |
CHANGES: addition of simtest and reinstatement of flash-boot-wa
|
2019-02-10 |
Mychaela Falconia |
doc/Loadtools-usage: refer to Flash-boot-wa article when explaining
|
2019-02-10 |
Mychaela Falconia |
doc/Flash-boot-wa: explanatory article added
|
2019-02-10 |
Mychaela Falconia |
doc/SIM-hardware-debugging: article written
|
2019-02-10 |
Mychaela Falconia |
target-utils/Makefile: flash-boot-wa and simtest moved to installable set
|
2019-02-10 |
Mychaela Falconia |
target-utils/simtest/Makefile: install added
|
2019-02-09 |
Mychaela Falconia |
simtest: reset implemented
|
2019-02-09 |
Mychaela Falconia |
simtest: setup implemented
|
2019-02-09 |
Mychaela Falconia |
simtest: volt command implemented
|
2019-02-09 |
Mychaela Falconia |
target-utils/Makefile: simtest added as non-installable
|
2019-02-09 |
Mychaela Falconia |
target-utils: simtest program started
|
2019-02-09 |
Mychaela Falconia |
target-utils: wait_ARM_cycles() added to libbase
|
2019-02-08 |
Mychaela Falconia |
rvinterf/asyncshell/helpfile: unterm addition documented
|
2019-02-08 |
Mychaela Falconia |
fc-shell: unterm command implemented in one-shot mode
|
2019-02-07 |
Mychaela Falconia |
doc/User-phone-tools: update for SMS PDU mode working on all targets
|
2019-01-16 |
Mychaela Falconia |
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
|
2019-01-15 |
Mychaela Falconia |
fcup-rvtat: added support for long strings with new fw versions
|
2019-01-09 |
Mychaela Falconia |
fc-shell: added unterm command for sending unterminated strings to ATI
|
2018-12-29 |
Mychaela Falconia |
better documentation for calversion
|
2018-12-29 |
Mychaela Falconia |
target-utils/Makefile: calversion added to standard set
|
2018-12-29 |
Mychaela Falconia |
target-utils/calversion/Makefile: install added
|
2018-12-26 |
Mychaela Falconia |
CHANGES: calversion documented
|
2018-12-26 |
Mychaela Falconia |
target-utils/Makefile: calversion added
|
2018-12-26 |
Mychaela Falconia |
target-utils/calversion: program written, compiles
|
2018-11-17 |
Mychaela Falconia |
CHANGES and doc/Host-tools-overview: fc-rftab2c addition
|
2018-11-17 |
Mychaela Falconia |
fc-rftab2c program written, compiles
|
2018-11-06 |
Mychaela Falconia |
CHANGES: Mot C155 flashing fix documented
|
2018-11-06 |
Mychaela Falconia |
loadtools: Mot C155 turns out to have the same flash partition quirks
|
2018-11-05 |
Mychaela Falconia |
CHANGES: fc-host-tools-r9 released
|
2018-11-04 |
Mychaela Falconia |
documentation: added some notes about the importance of preserving
|
2018-11-04 |
Mychaela Falconia |
top README simplified, source dirs info moved to Source-dirs
|
2018-11-04 |
Mychaela Falconia |
CHANGES: documented all changes for the upcoming release
|
2018-11-04 |
Mychaela Falconia |
doc/Rvinterf-tools write-up added
|
2018-11-04 |
Mychaela Falconia |
doc/TIFFS-Overview: long-overdue update for the current state of FC
|
2018-11-04 |
Mychaela Falconia |
doc/RVTMUX: added note at the beginning about paradigm changes
|
2018-11-03 |
Mychaela Falconia |
doc/RVTMUX: updated for the current state of FreeCalypso
|
2018-10-30 |
Mychaela Falconia |
toolchain/build+install.sh: fixed ancient bug wherein the path for
|
2018-10-28 |
Mychaela Falconia |
doc/Deep-sleep-support article written
|
2018-10-28 |
Mychaela Falconia |
fcup-atinterf: 2x 30 ms appears to be sufficient to wake up from deep sleep
|
2018-10-28 |
Mychaela Falconia |
fcup-atinterf: added 20 ms serial flush
|
2018-10-28 |
Mychaela Falconia |
fc-shell: implemented 30 ms delay for batch mode AT commands with -p
|
2018-10-28 |
Mychaela Falconia |
rvinterf clients: implemented 30 ms delay for batch ops with -p
|
2018-10-28 |
Mychaela Falconia |
rvinterf client refactoring: libasync clients converted to use libinterf
|
2018-10-27 |
Mychaela Falconia |
rvinterf/rvtat converted to use libinterf
|
2018-10-27 |
Mychaela Falconia |
rvinterf/etmsync converted to use libinterf
|
2018-10-27 |
Mychaela Falconia |
rvinterf client refactoring: libinterf created
|
2018-10-26 |
Mychaela Falconia |
CHANGES: FCDEV3B S/N 001 bug support removal
|
2018-10-26 |
Mychaela Falconia |
doc/Flash-boot-modes article removed (moved to freecalypso-docs)
|
2018-10-26 |
Mychaela Falconia |
doc/Flash-boot-defect article removed (no longer relevant)
|
2018-10-26 |
Mychaela Falconia |
target-utils/Makefile: flash-boot-wa hack removed from the basic set
|
2018-10-25 |
Mychaela Falconia |
CHANGES: mokosrec2bin addition and documentation updates
|
2018-10-25 |
Mychaela Falconia |
doc/Host-tools-overview: mokosrec2bin addition documented
|
2018-10-25 |
Mychaela Falconia |
mokosrec2bin utility imported from the old freecalypso-reveng tree,
|
2018-10-25 |
Mychaela Falconia |
INSTALL: updates regarding the ARM7 gcc toolchain
|
2018-10-25 |
Mychaela Falconia |
loadtools/loadtool.help: update for FC devices having flash2
|
2018-09-07 |
Mychaela Falconia |
CHANGES: typo fix
|
2018-08-11 |
Mychaela Falconia |
CHANGES: fcup-* minor fixes documented
|
2018-08-11 |
Mychaela Falconia |
fcup-settime: moved time() retrieval a little closer to the output
|
2018-08-11 |
Mychaela Falconia |
fcup-smdump: set AT+CSCS="IRA" at the end (don't leave HEX)
|
2018-08-11 |
Mychaela Falconia |
fcup-smsend: fixed bug in the handling of -W with no dest address argument
|
2018-03-18 |
Mychaela Falconia |
CHANGES: fc-host-tools-r8 is out
|
2018-03-18 |
Mychaela Falconia |
CHANGES: target-utils Tx FIFO change documented
|
2018-03-18 |
Mychaela Falconia |
doc/RF_tables: typo fix
|
2018-03-18 |
Mychaela Falconia |
target-utils: wait for FIFO not full in serial_out() instead of FIFO empty
|
2018-03-16 |
Mychaela Falconia |
CHANGES: fc-shell key command addition documented
|
2018-03-16 |
Mychaela Falconia |
fc-shell help file: documented key, keydown and keyup commands
|
2018-03-16 |
Mychaela Falconia |
fc-shell: added key commands for sending keystrokes via MMI CONFIG sysprims
|
2018-03-15 |
Mychaela Falconia |
INSTALL: update for the move-out of fc-lcdemu
|
2018-03-15 |
Mychaela Falconia |
CHANGES: fc-lcdemu move-out and rvinterf -X output inversion fix
|
2018-03-15 |
Mychaela Falconia |
doc/Host-tools-overview: update for the move-out of fc-lcdemu
|
2018-03-15 |
Mychaela Falconia |
rvinterf: -v option removed, -X LCD output is always inverted
|
2018-03-15 |
Mychaela Falconia |
lcdemu removed from this repository, moved to freecalypso-ui-dev
|
2018-03-11 |
Mychaela Falconia |
fc-fsio help: write-battery-table and write-charging-config documented
|
2018-03-11 |
Mychaela Falconia |
doc/Host-tools-overview: documented new additions
|
2018-03-11 |
Mychaela Falconia |
README: updated for the new set of top-level source directories
|
2018-03-11 |
Mychaela Falconia |
CHANGES: User Phone Tools addition documented
|
2018-03-11 |
Mychaela Falconia |
doc/User-phone-tools article written
|
2018-03-10 |
Mychaela Falconia |
fcup-settime program written, compiles, produces expected AT+CCLK command
|
2018-03-09 |
Mychaela Falconia |
sms-pdu-decode: added -p option to keep the raw PDUs in the output
|
2018-03-09 |
Mychaela Falconia |
fcup-smwrite program written, compiles
|
2018-03-09 |
Mychaela Falconia |
fcup-smsendpdu program written, compiles
|
2018-03-09 |
Mychaela Falconia |
fcup-smsendmult: UCS-2 send mode implemented
|
2018-03-09 |
Mychaela Falconia |
fcup-smsendmult: preparations for adding UCS-2 support
|
2018-03-09 |
Mychaela Falconia |
fcup-smsend: UCS-2 send mode implemented
|
2018-03-09 |
Mychaela Falconia |
fcup-smsend: preparations for adding UCS-2 support
|
2018-03-09 |
Mychaela Falconia |
uptools/atcmd: smsend_pdugen.c split off from smsend_pduout.c
|
2018-03-09 |
Mychaela Falconia |
uptools/atcmd/smsend_pduout.c: added UCS-2 function, some refactoring
|
2018-03-08 |
Mychaela Falconia |
uptools/libcoding: added function for UCS-2 BE output
|
2018-03-08 |
Mychaela Falconia |
uptools/libcoding: added function for turning UTF-8 into UCS-2
|
2018-03-08 |
Mychaela Falconia |
uptools/libcoding: added function for generating SMS PDUs with 8-bit text
|
2018-03-08 |
Mychaela Falconia |
uptools: make_sms_submit_pdu() in libcoding now takes PID and DCS arguments
|
2018-03-08 |
Mychaela Falconia |
fcup-smsendmult program written, compiles
|
2018-03-08 |
Mychaela Falconia |
uptools/atcmd: smsend_pdu.c renamed to smsend_pduout.c
|
2018-03-08 |
Mychaela Falconia |
fcup-smsend: automatic -q (concat quiet) with -W
|
2018-03-08 |
Mychaela Falconia |
fcup-smsend: implemented automatic concat SMS refno generation
|
2018-03-08 |
Mychaela Falconia |
fcup-smsend: implemented -q option to suppress concat summary output
|
2018-03-08 |
Mychaela Falconia |
fcup-smsend: implemented concat SMS sending with user-given refno
|
2018-03-08 |
Mychaela Falconia |
fcup-smsend: prep for adding concat SMS support
|
2018-03-08 |
Mychaela Falconia |
uptools/atcmd: smsend_basic.c renamed to smsend_main.c
|
2018-03-08 |
Mychaela Falconia |
fcup-smsend: added support for multiline messages in default PDU send mode
|
2018-03-08 |
Mychaela Falconia |
fcup-smdump & fcup-smsend: send AT+CMEE=2 first
|
2018-03-05 |
Mychaela Falconia |
fcup-smsend: buglet in PDU mode length manipulations
|
2018-03-05 |
Mychaela Falconia |
fcup-smsend program put together, compiles
|
2018-03-04 |
Mychaela Falconia |
uptools/libcoding: implemented function for generating hex strings
|
2018-03-04 |
Mychaela Falconia |
uptools/libcoding: implemented generation of SMS-SUBMIT PDUs
|
2018-03-04 |
Mychaela Falconia |
uptools/libcoding/gsm7_encode.c: bug found on review
|
2018-02-07 |
Mychaela Falconia |
uptools/libcoding: SMS dest address parsing and encoding implemented
|
2018-02-07 |
Mychaela Falconia |
uptools/libcoding: septet to octet packing function implemented
|
2018-02-06 |
Mychaela Falconia |
uptools/libcoding: implemented 8859-1 -> GSM7 encoding function
|
2018-02-06 |
Mychaela Falconia |
uptools/libcoding: implemented 8859-1 -> GSM7 encoding table
|
2018-02-05 |
Mychaela Falconia |
uptools/libcoding: UTF-8 input conversion to 8859-1 implemented
|
2018-02-05 |
Mychaela Falconia |
fcup-smdump: -d delete-after-dump option implemented
|
2018-02-05 |
Mychaela Falconia |
fcup-smdump implemented, compiles
|
2018-02-04 |
Mychaela Falconia |
uptools/atcmd/atinterf.c: no target debug mode implemented
|
2018-02-04 |
Mychaela Falconia |
uptools/atcmd/atinterf.c: logic inversion error
|
2018-02-04 |
Mychaela Falconia |
uptools/Makefile: atcmd added
|
2018-02-04 |
Mychaela Falconia |
uptools/atcmd framework started
|
2018-02-04 |
Mychaela Falconia |
rvinterf/Makefile: rvtat added
|
2018-02-04 |
Mychaela Falconia |
fcup-rvtat program written, compiles
|
2018-02-04 |
Mychaela Falconia |
fcup-atinterf: implemented wakeup of sleeping targets
|
2018-02-04 |
Mychaela Falconia |
fcup-atinterf: brown paper bag
|
2018-02-04 |
Mychaela Falconia |
top Makefile: uptools need libserial for atinterf
|
2018-02-04 |
Mychaela Falconia |
uptools/Makefile: atinterf added
|
2018-02-04 |
Mychaela Falconia |
fcup-atinterf program written, compiles
|
2018-02-04 |
Mychaela Falconia |
top Makefile: uptools subdirectory added
|
2018-02-04 |
Mychaela Falconia |
sms-pdu-decode: fixed bug in the decoding of From/To address fields
|
2018-02-04 |
Mychaela Falconia |
uptools/Makefile created
|
2018-02-04 |
Mychaela Falconia |
sms-pdu-decode main program written, compiles
|
2018-02-04 |
Mychaela Falconia |
uptools/libcoding: hex dump function implemented
|
2018-02-04 |
Mychaela Falconia |
uptools/libcoding: SMS DCS decoding implemented
|
2018-02-04 |
Mychaela Falconia |
uptools/libcoding: GSM timestamp decoding implemented
|
2018-02-03 |
Mychaela Falconia |
uptools/libcoding: alphabetic address handling implemented
|
2018-02-03 |
Mychaela Falconia |
uptools/libcoding: SC address decoding implemented
|
2018-02-03 |
Mychaela Falconia |
uptools/libcoding: digit decoding implemented
|
2018-02-03 |
Mychaela Falconia |
uptools/libcoding: 7-bit decoding implemented
|
2018-02-03 |
Mychaela Falconia |
uptools/libcoding: hex line decoding implemented
|
2018-02-03 |
Mychaela Falconia |
uptools started with libcoding
|
2018-01-20 |
Mychaela Falconia |
CHANGES: fc-loadtool D-Sample fix documented
|
2018-01-20 |
Mychaela Falconia |
loadtools/scripts/dsample.config: use the new 28f640w30b chip type
|
2018-01-20 |
Mychaela Falconia |
fc-loadtool: support for 28F640W30B flash chip with partition quirks
|
2017-12-29 |
Mychaela Falconia |
compile-fc-chg: changes for FCHG v2
|
2017-12-18 |
Mychaela Falconia |
fc-tmsync: added pirelli-vbat-cal command to read Pirelli's ADC calibration
|
2017-12-17 |
Mychaela Falconia |
CHANGES: documented fc-fsio additions
|
2017-12-17 |
Mychaela Falconia |
fc-fsio: implemented write-battery-table and write-charging-config commands
|
2017-12-17 |
Mychaela Falconia |
compile-fc-chg tool written, compiles
|
2017-12-17 |
Mychaela Falconia |
ffstools/Makefile: newcomp added to SUBDIR
|
2017-12-17 |
Mychaela Falconia |
compile-fc-batt tool written, compiles
|
2017-11-22 |
Mychaela Falconia |
CHANGES: fc-tmsh auw-fir command addition documented
|
2017-11-22 |
Mychaela Falconia |
fc-tmsh: auw-fir command implemented
|
2017-11-22 |
Mychaela Falconia |
librftab: implemented reading of FIR coefficient tables
|
2017-11-22 |
Mychaela Falconia |
librftab: reading of Tx ramp template files split from rftablerd module
|
2017-11-22 |
Mychaela Falconia |
fc-fsio help: upload-rf-table addition documented
|
2017-11-22 |
Mychaela Falconia |
CHANGES: c1xx-calextr and RF table changes documented
|
2017-11-22 |
Mychaela Falconia |
doc/Host-tools-overview: fc-tmsync documented
|
2017-11-22 |
Mychaela Falconia |
doc/Host-tools-overview: fc-readcal documented
|
2017-11-22 |
Mychaela Falconia |
doc/RF_tables: updated for the newly implemented more complete support
|
2017-11-22 |
Mychaela Falconia |
doc/Host-tools-overview: fc-cal2bin documented
|
2017-11-21 |
Mychaela Falconia |
fc-fsio upload-rf-table implemented
|
2017-11-21 |
Mychaela Falconia |
fc-fsio: write_buf_to_file() function made global in prep for upload-rf-table
|
2017-11-20 |
Mychaela Falconia |
doc/Compal-calibration: fc-readcal failed approach documented
|
2017-11-20 |
Mychaela Falconia |
doc/Compal-calibration: c1xx-calextr handles Rx calchan now
|
2017-11-20 |
Mychaela Falconia |
c1xx-calextr: Rx calchan conversion implemented
|
2017-11-19 |
Mychaela Falconia |
doc/Compal-calibration: Rx calchan ranges documented
|
2017-11-19 |
Mychaela Falconia |
c1xx-calextr: preparations for Rx calchan conversion
|
2017-11-19 |
Mychaela Falconia |
started documenting c1xx-calextr
|
2017-11-18 |
Mychaela Falconia |
c1xx-calextr: off-by-1 error in the Tx levels table conversion
|
2017-11-18 |
Mychaela Falconia |
c1xx-calextr: output implemented
|
2017-11-18 |
Mychaela Falconia |
c1xx-calextr: table conversion implemented
|
2017-11-18 |
Mychaela Falconia |
c1xx-calextr: preparations for both ASCII and binary output
|
2017-11-18 |
Mychaela Falconia |
c1xx-calextr will need mkdir and librftab
|
2017-11-18 |
Mychaela Falconia |
c1xx-calextr started
|
2017-11-18 |
Mychaela Falconia |
ffstools/Makefile: caltools added to SUBDIR
|
2017-11-18 |
Mychaela Falconia |
fc-cal2bin written, compiles
|
2017-11-18 |
Mychaela Falconia |
fc-tmsync: ttr-all implemented
|
2017-11-18 |
Mychaela Falconia |
fc-tmsync: rftr save to file implemented
|
2017-11-18 |
Mychaela Falconia |
fc-cal2text changed to emit Tx ramps for each band as a single table
|
2017-11-18 |
Mychaela Falconia |
rvinterf/tmsh: old rftable{rd,wr}.c deleted (moved to librftab)
|
2017-11-18 |
Mychaela Falconia |
fc-tmsh converted to link with librftab
|
2017-11-18 |
Mychaela Falconia |
fc-tmsync converted to link with librftab
|
2017-11-18 |
Mychaela Falconia |
fc-cal2text converted to link with librftab
|
2017-11-18 |
Mychaela Falconia |
librftab added to top Makefile as dependency for ffstools and rvinterf
|
2017-11-18 |
Mychaela Falconia |
librftab reader: implemented reading of Tx ramps tables
|
2017-11-17 |
Mychaela Falconia |
librftab writer: added function to write Tx ramps tables
|
2017-11-17 |
Mychaela Falconia |
librftab compiles
|
2017-11-17 |
Mychaela Falconia |
librftab started with rftablerd.c and rftablewr.c from rvinterf/tmsh
|
2017-11-17 |
Mychaela Falconia |
fc-readcal: fixed bug in the shifting of afcdac
|
2017-11-17 |
Mychaela Falconia |
fc-readcal written, compiles
|
2017-11-17 |
Mychaela Falconia |
etmsync l1tmops module: need to return on errors, not exit
|
2017-11-17 |
Mychaela Falconia |
etmsync: host_mkdir() function factored out of fc-fsio
|
2017-11-17 |
Mychaela Falconia |
fc-tmsync: missed newline at the end of rfpr output
|
2017-11-16 |
Mychaela Falconia |
fc-tmsync: L1TM operation commands hooked in
|
2017-11-16 |
Mychaela Falconia |
fc-tmsync: user command wrappers implemented
|
2017-11-16 |
Mychaela Falconia |
etmsync l1tmops module: ttr implemented
|
2017-11-16 |
Mychaela Falconia |
etmsync l1tmops module: rfpr implemented
|
2017-11-16 |
Mychaela Falconia |
etmsync: l1tmops module compiles and links into fc-tmsync
|
2017-11-16 |
Mychaela Falconia |
fc-tmsync skeleton started
|
2017-11-16 |
Mychaela Falconia |
CHANGES: fc-fsio pirelli-magnetite-init change documented
|
2017-11-16 |
Mychaela Falconia |
fc-fsio pirelli-magnetite-init: added /gsm/rf/afcdac record missed earlier
|
2017-10-20 |
Mychaela Falconia |
CHANGES: removal of ffstools/aud-fcdev3b is the first post-r7 change
|
2017-10-20 |
Mychaela Falconia |
.hgignore: removed the entries for ffstools/aud-*
|
2017-10-20 |
Mychaela Falconia |
ffstools/aud-fcdev3b removed: migrated to the new fc-audio-config repository
|
2017-09-29 |
Mychaela Falconia |
CHANGES: fc-host-tools-r7 released
|
2017-09-28 |
Mychaela Falconia |
INSTALL: libserial and Linux specifics documented
|
2017-09-28 |
Mychaela Falconia |
doc/Audio-mode-config: typo fix
|
2017-09-28 |
Mychaela Falconia |
CHANGES: added pointer to doc/High-speed-serial in the serial change blurb
|
2017-09-28 |
Mychaela Falconia |
linux-2.6.37.6-ftdi_sio.c.patch moved from doc to old
|
2017-09-28 |
Mychaela Falconia |
doc/High-speed-serial: update/rewrite for the new FTDI support
|
2017-09-22 |
Mychaela Falconia |
CHANGES: libserial change documented
|
2017-09-22 |
Mychaela Falconia |
libserial-newlnx is now the new official libserial
|
2017-09-22 |
Mychaela Falconia |
libserial-newlnx: new way implemented, compiles
|
2017-09-22 |
Mychaela Falconia |
beginning of libserial-newlnx: copy of libserial-orig
|
2017-09-21 |
Mychaela Falconia |
rvinterf and friends converted to use libserial
|
2017-09-21 |
Mychaela Falconia |
set_serial_nonblock() added to libserial
|
2017-09-21 |
Mychaela Falconia |
fc-serterm converted to use libserial
|
2017-09-21 |
Mychaela Falconia |
loadtools reworked to use factored-out libserial
|
2017-09-21 |
Mychaela Falconia |
libserial hooked into the top level Makefile
|
2017-09-21 |
Mychaela Falconia |
beginning of factored-out libserial
|
2017-09-21 |
Mychaela Falconia |
doc/Audio-mode-config: fixed logic error in the description of extra-gain
|
2017-08-26 |
Mychaela Falconia |
tiaud-compile: max FIR coefficient number is 30, not 31
|
2017-08-26 |
Mychaela Falconia |
doc/Audio-mode-config written
|
2017-08-26 |
Mychaela Falconia |
doc/Host-tools-overview: tiaud-compile and tiaud-mkvol documented
|
2017-08-26 |
Mychaela Falconia |
CHANGES: first changes since fc-host-tools-r6
|
2017-08-26 |
Mychaela Falconia |
ffstools/aud-fcdev3b: created some audio config tables for FCDEV3B
|
2017-08-25 |
Mychaela Falconia |
tiaud-mkvol program written
|
2017-08-25 |
Mychaela Falconia |
tiaud-compile program written
|
2017-08-21 |
Mychaela Falconia |
CHANGES: fc-host-tools-r6 released
|
2017-08-20 |
Mychaela Falconia |
CHANGES: exitcodes.h addition documented
|
2017-08-20 |
Mychaela Falconia |
rvinterf/include/exitcodes.h: added ERROR_RFFAIL for fc-rfcal-tools
|
2017-08-20 |
Mychaela Falconia |
doc/Loadtools-usage: fc-loadtool batch mode documented
|
2017-08-17 |
Mychaela Falconia |
fc-rfcal-tools now public, old frozen rfcal code can be removed
|
2017-08-12 |
Mychaela Falconia |
CHANGES: fc-fsio format change documented
|
2017-08-12 |
Mychaela Falconia |
fc-fsio format command: don't stop scripts on NOPREFORMAT error,
|
2017-08-04 |
Mychaela Falconia |
fc-loadtool batch mode: added -B option
|
2017-08-03 |
Mychaela Falconia |
CHANGES: first changes since fc-host-tools-r5
|
2017-08-03 |
Mychaela Falconia |
fc-loadtool: automated command script mode implemented
|
2017-08-03 |
Mychaela Falconia |
loadtools: preparations for loadtool exit code possibly being nonzero
|
2017-08-03 |
Mychaela Falconia |
loadtool.help: exec command description updated
|
2017-08-03 |
Mychaela Falconia |
fc-loadtool: exec command now looks for scripts in the current directory
|
2017-08-03 |
Mychaela Falconia |
loadtools and rvinterf: set TIOCEXCL on the tty
|
2017-05-20 |
Mychaela Falconia |
CHANGES: fc-host-tools-r5 released
|
2017-05-20 |
Mychaela Falconia |
CHANGES: documented the addition of keepalive support to rvinterf
|
2017-05-20 |
Mychaela Falconia |
doc/RVTMUX: keepalive mechanism documented
|
2017-05-20 |
Mychaela Falconia |
rvinterf: implemented keepalive mechanism
|
2017-05-20 |
Mychaela Falconia |
rvinterf/Makefile: install include files in /opt/freecalypso/include/rvinterf
|
2017-05-20 |
Mychaela Falconia |
rvinterf/include/exitcodes.h: added ERROR_RFTEST for use by autocal tools
|
2017-05-20 |
Mychaela Falconia |
rfcal migration
|
2017-05-20 |
Mychaela Falconia |
doc/TIFFS-IVA-usage updated
|
2017-05-20 |
Mychaela Falconia |
ffstools/README renamed to README.old,
|
2017-05-20 |
Mychaela Falconia |
doc/Host-tools-overview: updated and simplified
|
2017-05-19 |
Mychaela Falconia |
doc/Loadtools-on-GTA0x article added, replacing the corresponding section
|
2017-05-19 |
Mychaela Falconia |
loadtools/gta-ap-build.sed: don't build fc-compalram or fc-buzplay for GTA0x AP
|
2017-05-19 |
Mychaela Falconia |
loadtools/README renamed to README.old, previous README.old to README.older
|
2017-05-19 |
Mychaela Falconia |
INSTALL: added blurb about target binaries in packaged releases
|
2017-05-19 |
Mychaela Falconia |
README: minor updates
|
2017-05-18 |
Mychaela Falconia |
CHANGES: documented newly added utilities
|
2017-05-18 |
Mychaela Falconia |
doc/Loadtools-usage: replacing loadtools/README
|
2017-05-18 |
Mychaela Falconia |
INSTALL: cosmetic fix in bullet point numbering
|
2017-05-14 |
Mychaela Falconia |
rfcal/Makefile: tsid-test added to SUBDIR
|
2017-05-14 |
Mychaela Falconia |
fc-tsid-shell (fc-cmu200d development aid) written
|
2017-05-02 |
Mychaela Falconia |
Flash-boot-defect and Flash-boot-modes documentation
|
2017-05-01 |
Mychaela Falconia |
loadtools: second program invokation support added to fc-iram like in fc-xram
|
2017-05-01 |
Mychaela Falconia |
target-utils/Makefile: flash-boot-wa added
|
2017-05-01 |
Mychaela Falconia |
target-utils/flash-boot-wa/Makefile: install added
|
2017-05-01 |
Mychaela Falconia |
target-utils/flash-boot-wa written
|
2017-05-01 |
Mychaela Falconia |
target-utils/flash-boot-test: added UART init, needed for mode 1
|
2017-04-30 |
Mychaela Falconia |
target-utils/Makefile: flash-boot-test added
|
2017-04-30 |
Mychaela Falconia |
target-utils/flash-boot-test/main.c: indicate the mode/version in the banner
|
2017-04-30 |
Mychaela Falconia |
target-utils/flash-boot-test written
|
2017-04-24 |
Mychaela Falconia |
fc-cmu200d: skeleton complete, ready to start adding meat
|
2017-04-24 |
Mychaela Falconia |
fc-cmu200d: socket handling skeleton added
|
2017-04-24 |
Mychaela Falconia |
fc-cmu200d skeleton started, compiles
|
2017-04-23 |
Mychaela Falconia |
doc/RF-cal/CMU200-notes: added signal generator commands
|
2017-04-23 |
Mychaela Falconia |
doc/RF-cal/Test-system-interface written
|
2017-04-23 |
Mychaela Falconia |
doc/RF-cal/Architecture document written
|
2017-04-23 |
Mychaela Falconia |
doc: RF calibration documents/notes moved into RF-cal subdir
|
2017-04-23 |
Mychaela Falconia |
doc/CMU200-notes started
|
2017-04-23 |
Mychaela Falconia |
rfcal/Makefile: added cmu200 subdir
|
2017-04-23 |
Mychaela Falconia |
fc-serscpi utility written, compiles
|
2017-04-14 |
Mychaela Falconia |
doc/VCXO_calibration written
|
2017-04-13 |
Mychaela Falconia |
fc-vcxo-param: use M_PI constant instead of acos(-1.0)
|
2017-04-13 |
Mychaela Falconia |
fc-vcxo-param: bug in lin_b2 computation
|
2017-04-12 |
Mychaela Falconia |
rfcal/vcxo-manual hooked into the make hierarchy
|
2017-04-12 |
Mychaela Falconia |
manual VCXO calibration code: fc-vcxo-param utility written
|
2017-04-12 |
Mychaela Falconia |
started manual VCXO calibration code: fc-vcxo-linear utility written
|
2017-03-27 |
Mychaela Falconia |
doc/Melody_E1 written
|
2017-03-25 |
Mychaela Falconia |
top Makefile: ringtools added to SUBDIR
|
2017-03-25 |
Mychaela Falconia |
fc-e1decode: forgot terminating newline on osc lines
|
2017-03-25 |
Mychaela Falconia |
fc-e1gen: MAX_FIELDS needed to be bumped for the optional bit0 field
|
2017-03-25 |
Mychaela Falconia |
fc-e1decode utility written, compiles
|
2017-03-25 |
Mychaela Falconia |
fc-e1gen: support parenthesized options for bit0 and dummy time byte
|
2017-03-23 |
Mychaela Falconia |
e1-experiments: checking in test4.src
|
2017-03-22 |
Mychaela Falconia |
e1-experiments: better test setup
|
2017-03-22 |
Mychaela Falconia |
fc-e1gen & e1-experiments: added global oscillator set header word
|
2017-03-22 |
Mychaela Falconia |
fc-gsm2vm utility written
|
2017-03-22 |
Mychaela Falconia |
fc-vm2hex utility written
|
2017-03-20 |
Mychaela Falconia |
CHANGES: documenting fc-tmsh changes, fc-cal2text and tiaud-decomp addition
|
2017-03-19 |
Mychaela Falconia |
fc-tmsh: consistent naming of audio command sending functions
|
2017-03-19 |
Mychaela Falconia |
fc-tmsh: auw command sending implemented
|
2017-03-19 |
Mychaela Falconia |
fc-tmsh: ETM_AUDIO commands are just aul/aus/aur/auw, not audio <subcmd>
|
2017-03-19 |
Mychaela Falconia |
ffstools/Makefile: tiaud subdir added
|
2017-03-19 |
Mychaela Falconia |
make install added for tiaud-decomp
|
2017-03-18 |
Mychaela Falconia |
tiaud-decomp utility written
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh: aur response handling implemented
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh: proper handling of auw responses
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh: implemented proper handling of aul and aus responses
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh: beginning of intelligent ETM_AUDIO response handling
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh: aur command implemented
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh: aul and aus commands added like in TI's original
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh: stub handling of ETM_AUDIO responses
|
2017-03-17 |
Mychaela Falconia |
fc-tmsh l1tm response handling: returned values can be signed or unsigned
|
2017-03-06 |
Mychaela Falconia |
doc/Host-tools-overview: update for fc-memdump replacing fc-olddump
|
2017-03-06 |
Mychaela Falconia |
fc-olddump replaced with fc-memdump
|
2017-03-05 |
Mychaela Falconia |
CHANGES: list the addition of TM3 and l1tm command support to fc-tmsh
|
2017-03-05 |
Mychaela Falconia |
fc-tmsh: oabbr and oabbw response handling implemented
|
2017-03-05 |
Mychaela Falconia |
fc-tmsh: oabbr and oabbw command sending implemented
|
2017-03-05 |
Mychaela Falconia |
fc-tmsh: omw command and response handling added
|
2017-02-27 |
Mychaela Falconia |
doc/RF_tables write-up added
|
2017-02-27 |
Mychaela Falconia |
rftablewr.c: forgot the newline at the end of the ramp-down output
|
2017-02-27 |
Mychaela Falconia |
rftablewr.c: agc-table write: eliminate leading space in the output
|
2017-02-27 |
Mychaela Falconia |
rftablewr.c: bug in the il2agc table output
|
2017-02-27 |
Mychaela Falconia |
rftablewr.c: better line break structure in the tx-calchan table
|
2017-02-27 |
Mychaela Falconia |
ffstools/Makefile: cal2text added
|
2017-02-27 |
Mychaela Falconia |
fc-cal2text utility written, compiles
|
2017-02-26 |
Mychaela Falconia |
fc-tmsh: save-tx-ramp command implemented
|
2017-02-26 |
Mychaela Falconia |
fc-tmsh: save-rf-table-raw command implemented
|
2017-02-26 |
Mychaela Falconia |
fc-tmsh: save-rf-table command implemented
|
2017-02-26 |
Mychaela Falconia |
RF table writing code implemented, linked into fc-tmsh
|
2017-02-20 |
Mychaela Falconia |
fc-tmsh: ttr response handling implemented
|
2017-02-20 |
Mychaela Falconia |
fc-tmsh: ttw response handling implemented
|
2017-02-20 |
Mychaela Falconia |
fc-tmsh: rftr response handling implemented
|
2017-02-20 |
Mychaela Falconia |
fc-tmsh: l1tm stats response display
|
2017-02-19 |
Mychaela Falconia |
fc-tmsh: RF_ENABLE response handled intelligently
|
2017-02-19 |
Mychaela Falconia |
fc-tmsh: beginning of l1tm response handling
|
2017-02-19 |
Mychaela Falconia |
fc-tmsh: me command implemented
|
2017-02-19 |
Mychaela Falconia |
fc-tmsh: mpw and mpr implemented
|
2017-02-19 |
Mychaela Falconia |
fc-tmsh: ttr command implemented, ttw command hooked in
|
2017-02-19 |
Mychaela Falconia |
fc-tmsh: ttw command implemented
|