| Sun, 10 Feb 2019 20:40:56 +0000 |
Mychaela Falconia |
doc/SIM-hardware-debugging: article written
|
| Sun, 10 Feb 2019 17:46:07 +0000 |
Mychaela Falconia |
target-utils/Makefile: flash-boot-wa and simtest moved to installable set
|
| Sun, 10 Feb 2019 17:34:55 +0000 |
Mychaela Falconia |
target-utils/simtest/Makefile: install added
|
| Sat, 09 Feb 2019 17:21:45 +0000 |
Mychaela Falconia |
simtest: reset implemented
|
| Sat, 09 Feb 2019 17:15:57 +0000 |
Mychaela Falconia |
simtest: setup implemented
|
| Sat, 09 Feb 2019 08:09:32 +0000 |
Mychaela Falconia |
simtest: volt command implemented
|
| Sat, 09 Feb 2019 07:58:32 +0000 |
Mychaela Falconia |
target-utils/Makefile: simtest added as non-installable
|
| Sat, 09 Feb 2019 07:55:50 +0000 |
Mychaela Falconia |
target-utils: simtest program started
|
| Sat, 09 Feb 2019 07:35:07 +0000 |
Mychaela Falconia |
target-utils: wait_ARM_cycles() added to libbase
|
| Fri, 08 Feb 2019 02:14:53 +0000 |
Mychaela Falconia |
rvinterf/asyncshell/helpfile: unterm addition documented
|
| Fri, 08 Feb 2019 00:49:34 +0000 |
Mychaela Falconia |
fc-shell: unterm command implemented in one-shot mode
|
| Thu, 07 Feb 2019 21:22:27 +0000 |
Mychaela Falconia |
doc/User-phone-tools: update for SMS PDU mode working on all targets
|
| Wed, 16 Jan 2019 01:21:29 +0000 |
Mychaela Falconia |
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
|
| Tue, 15 Jan 2019 06:01:04 +0000 |
Mychaela Falconia |
fcup-rvtat: added support for long strings with new fw versions
|
| Wed, 09 Jan 2019 07:58:06 +0000 |
Mychaela Falconia |
fc-shell: added unterm command for sending unterminated strings to ATI
|
| Sat, 29 Dec 2018 06:59:27 +0000 |
Mychaela Falconia |
better documentation for calversion
|
| Sat, 29 Dec 2018 05:46:22 +0000 |
Mychaela Falconia |
target-utils/Makefile: calversion added to standard set
|
| Sat, 29 Dec 2018 05:40:06 +0000 |
Mychaela Falconia |
target-utils/calversion/Makefile: install added
|
| Wed, 26 Dec 2018 07:22:44 +0000 |
Mychaela Falconia |
CHANGES: calversion documented
|
| Wed, 26 Dec 2018 07:04:32 +0000 |
Mychaela Falconia |
target-utils/Makefile: calversion added
|
| Wed, 26 Dec 2018 06:40:02 +0000 |
Mychaela Falconia |
target-utils/calversion: program written, compiles
|
| Sat, 17 Nov 2018 07:10:00 +0000 |
Mychaela Falconia |
CHANGES and doc/Host-tools-overview: fc-rftab2c addition
|
| Sat, 17 Nov 2018 02:15:07 +0000 |
Mychaela Falconia |
fc-rftab2c program written, compiles
|
| Tue, 06 Nov 2018 16:48:51 +0000 |
Mychaela Falconia |
CHANGES: Mot C155 flashing fix documented
|
| Tue, 06 Nov 2018 16:02:23 +0000 |
Mychaela Falconia |
loadtools: Mot C155 turns out to have the same flash partition quirks
|
| Mon, 05 Nov 2018 03:20:34 +0000 |
Mychaela Falconia |
CHANGES: fc-host-tools-r9 released
|
| Sun, 04 Nov 2018 21:55:19 +0000 |
Mychaela Falconia |
documentation: added some notes about the importance of preserving
|
| Sun, 04 Nov 2018 19:24:46 +0000 |
Mychaela Falconia |
top README simplified, source dirs info moved to Source-dirs
|
| Sun, 04 Nov 2018 17:42:39 +0000 |
Mychaela Falconia |
CHANGES: documented all changes for the upcoming release
|
| Sun, 04 Nov 2018 09:58:50 +0000 |
Mychaela Falconia |
doc/Rvinterf-tools write-up added
|
| Sun, 04 Nov 2018 02:00:03 +0000 |
Mychaela Falconia |
doc/TIFFS-Overview: long-overdue update for the current state of FC
|
| Sun, 04 Nov 2018 01:55:35 +0000 |
Mychaela Falconia |
doc/RVTMUX: added note at the beginning about paradigm changes
|
| Sat, 03 Nov 2018 05:51:17 +0000 |
Mychaela Falconia |
doc/RVTMUX: updated for the current state of FreeCalypso
|
| Tue, 30 Oct 2018 00:12:26 +0000 |
Mychaela Falconia |
toolchain/build+install.sh: fixed ancient bug wherein the path for
|
| Sun, 28 Oct 2018 23:20:00 +0000 |
Mychaela Falconia |
doc/Deep-sleep-support article written
|
| Sun, 28 Oct 2018 20:30:13 +0000 |
Mychaela Falconia |
fcup-atinterf: 2x 30 ms appears to be sufficient to wake up from deep sleep
|
| Sun, 28 Oct 2018 20:03:06 +0000 |
Mychaela Falconia |
fcup-atinterf: added 20 ms serial flush
|
| Sun, 28 Oct 2018 00:38:13 +0000 |
Mychaela Falconia |
fc-shell: implemented 30 ms delay for batch mode AT commands with -p
|
| Sun, 28 Oct 2018 00:30:16 +0000 |
Mychaela Falconia |
rvinterf clients: implemented 30 ms delay for batch ops with -p
|
| Sun, 28 Oct 2018 00:00:51 +0000 |
Mychaela Falconia |
rvinterf client refactoring: libasync clients converted to use libinterf
|
| Sat, 27 Oct 2018 23:48:20 +0000 |
Mychaela Falconia |
rvinterf/rvtat converted to use libinterf
|
| Sat, 27 Oct 2018 23:39:57 +0000 |
Mychaela Falconia |
rvinterf/etmsync converted to use libinterf
|
| Sat, 27 Oct 2018 23:35:10 +0000 |
Mychaela Falconia |
rvinterf client refactoring: libinterf created
|
| Fri, 26 Oct 2018 07:29:50 +0000 |
Mychaela Falconia |
CHANGES: FCDEV3B S/N 001 bug support removal
|
| Fri, 26 Oct 2018 07:13:35 +0000 |
Mychaela Falconia |
doc/Flash-boot-modes article removed (moved to freecalypso-docs)
|
| Fri, 26 Oct 2018 07:11:08 +0000 |
Mychaela Falconia |
doc/Flash-boot-defect article removed (no longer relevant)
|
| Fri, 26 Oct 2018 07:03:21 +0000 |
Mychaela Falconia |
target-utils/Makefile: flash-boot-wa hack removed from the basic set
|
| Thu, 25 Oct 2018 19:51:47 +0000 |
Mychaela Falconia |
CHANGES: mokosrec2bin addition and documentation updates
|
| Thu, 25 Oct 2018 19:33:16 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: mokosrec2bin addition documented
|
| Thu, 25 Oct 2018 19:23:35 +0000 |
Mychaela Falconia |
mokosrec2bin utility imported from the old freecalypso-reveng tree,
|
| Thu, 25 Oct 2018 18:40:10 +0000 |
Mychaela Falconia |
INSTALL: updates regarding the ARM7 gcc toolchain
|
| Thu, 25 Oct 2018 18:19:02 +0000 |
Mychaela Falconia |
loadtools/loadtool.help: update for FC devices having flash2
|
| Fri, 07 Sep 2018 20:43:47 +0000 |
Mychaela Falconia |
CHANGES: typo fix
|
| Sat, 11 Aug 2018 22:36:26 +0000 |
Mychaela Falconia |
CHANGES: fcup-* minor fixes documented
|
| Sat, 11 Aug 2018 21:52:17 +0000 |
Mychaela Falconia |
fcup-settime: moved time() retrieval a little closer to the output
|
| Sat, 11 Aug 2018 19:43:44 +0000 |
Mychaela Falconia |
fcup-smdump: set AT+CSCS="IRA" at the end (don't leave HEX)
|
| Sat, 11 Aug 2018 18:59:54 +0000 |
Mychaela Falconia |
fcup-smsend: fixed bug in the handling of -W with no dest address argument
|
| Sun, 18 Mar 2018 18:40:41 +0000 |
Mychaela Falconia |
CHANGES: fc-host-tools-r8 is out
|
| Sun, 18 Mar 2018 08:55:28 +0000 |
Mychaela Falconia |
CHANGES: target-utils Tx FIFO change documented
|
| Sun, 18 Mar 2018 08:37:23 +0000 |
Mychaela Falconia |
doc/RF_tables: typo fix
|
| Sun, 18 Mar 2018 07:22:26 +0000 |
Mychaela Falconia |
target-utils: wait for FIFO not full in serial_out() instead of FIFO empty
|
| Fri, 16 Mar 2018 01:59:34 +0000 |
Mychaela Falconia |
CHANGES: fc-shell key command addition documented
|
| Fri, 16 Mar 2018 01:47:08 +0000 |
Mychaela Falconia |
fc-shell help file: documented key, keydown and keyup commands
|
| Fri, 16 Mar 2018 00:52:40 +0000 |
Mychaela Falconia |
fc-shell: added key commands for sending keystrokes via MMI CONFIG sysprims
|
| Thu, 15 Mar 2018 04:59:32 +0000 |
Mychaela Falconia |
INSTALL: update for the move-out of fc-lcdemu
|
| Thu, 15 Mar 2018 01:16:17 +0000 |
Mychaela Falconia |
CHANGES: fc-lcdemu move-out and rvinterf -X output inversion fix
|
| Thu, 15 Mar 2018 00:58:39 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: update for the move-out of fc-lcdemu
|
| Thu, 15 Mar 2018 00:41:24 +0000 |
Mychaela Falconia |
rvinterf: -v option removed, -X LCD output is always inverted
|
| Thu, 15 Mar 2018 00:36:07 +0000 |
Mychaela Falconia |
lcdemu removed from this repository, moved to freecalypso-ui-dev
|
| Sun, 11 Mar 2018 23:24:52 +0000 |
Mychaela Falconia |
fc-fsio help: write-battery-table and write-charging-config documented
|
| Sun, 11 Mar 2018 18:20:00 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: documented new additions
|
| Sun, 11 Mar 2018 17:39:53 +0000 |
Mychaela Falconia |
README: updated for the new set of top-level source directories
|
| Sun, 11 Mar 2018 17:04:10 +0000 |
Mychaela Falconia |
CHANGES: User Phone Tools addition documented
|
| Sun, 11 Mar 2018 06:32:00 +0000 |
Mychaela Falconia |
doc/User-phone-tools article written
|
| Sat, 10 Mar 2018 00:46:03 +0000 |
Mychaela Falconia |
fcup-settime program written, compiles, produces expected AT+CCLK command
|
| Fri, 09 Mar 2018 22:15:43 +0000 |
Mychaela Falconia |
sms-pdu-decode: added -p option to keep the raw PDUs in the output
|
| Fri, 09 Mar 2018 20:43:53 +0000 |
Mychaela Falconia |
fcup-smwrite program written, compiles
|
| Fri, 09 Mar 2018 03:29:40 +0000 |
Mychaela Falconia |
fcup-smsendpdu program written, compiles
|
| Fri, 09 Mar 2018 02:56:09 +0000 |
Mychaela Falconia |
fcup-smsendmult: UCS-2 send mode implemented
|
| Fri, 09 Mar 2018 02:48:41 +0000 |
Mychaela Falconia |
fcup-smsendmult: preparations for adding UCS-2 support
|
| Fri, 09 Mar 2018 02:31:15 +0000 |
Mychaela Falconia |
fcup-smsend: UCS-2 send mode implemented
|
| Fri, 09 Mar 2018 00:43:36 +0000 |
Mychaela Falconia |
fcup-smsend: preparations for adding UCS-2 support
|
| Fri, 09 Mar 2018 00:27:24 +0000 |
Mychaela Falconia |
uptools/atcmd: smsend_pdugen.c split off from smsend_pduout.c
|
| Fri, 09 Mar 2018 00:17:13 +0000 |
Mychaela Falconia |
uptools/atcmd/smsend_pduout.c: added UCS-2 function, some refactoring
|
| Thu, 08 Mar 2018 23:59:42 +0000 |
Mychaela Falconia |
uptools/libcoding: added function for UCS-2 BE output
|
| Thu, 08 Mar 2018 23:06:31 +0000 |
Mychaela Falconia |
uptools/libcoding: added function for turning UTF-8 into UCS-2
|
| Thu, 08 Mar 2018 22:24:14 +0000 |
Mychaela Falconia |
uptools/libcoding: added function for generating SMS PDUs with 8-bit text
|
| Thu, 08 Mar 2018 20:33:03 +0000 |
Mychaela Falconia |
uptools: make_sms_submit_pdu() in libcoding now takes PID and DCS arguments
|
| Thu, 08 Mar 2018 19:47:40 +0000 |
Mychaela Falconia |
fcup-smsendmult program written, compiles
|
| Thu, 08 Mar 2018 18:13:38 +0000 |
Mychaela Falconia |
uptools/atcmd: smsend_pdu.c renamed to smsend_pduout.c
|
| Thu, 08 Mar 2018 17:57:36 +0000 |
Mychaela Falconia |
fcup-smsend: automatic -q (concat quiet) with -W
|
| Thu, 08 Mar 2018 17:47:58 +0000 |
Mychaela Falconia |
fcup-smsend: implemented automatic concat SMS refno generation
|
| Thu, 08 Mar 2018 16:41:57 +0000 |
Mychaela Falconia |
fcup-smsend: implemented -q option to suppress concat summary output
|
| Thu, 08 Mar 2018 16:28:26 +0000 |
Mychaela Falconia |
fcup-smsend: implemented concat SMS sending with user-given refno
|
| Thu, 08 Mar 2018 07:27:45 +0000 |
Mychaela Falconia |
fcup-smsend: prep for adding concat SMS support
|
| Thu, 08 Mar 2018 07:09:37 +0000 |
Mychaela Falconia |
uptools/atcmd: smsend_basic.c renamed to smsend_main.c
|
| Thu, 08 Mar 2018 07:04:06 +0000 |
Mychaela Falconia |
fcup-smsend: added support for multiline messages in default PDU send mode
|
| Thu, 08 Mar 2018 00:20:42 +0000 |
Mychaela Falconia |
fcup-smdump & fcup-smsend: send AT+CMEE=2 first
|
| Mon, 05 Mar 2018 02:58:13 +0000 |
Mychaela Falconia |
fcup-smsend: buglet in PDU mode length manipulations
|
| Mon, 05 Mar 2018 01:47:18 +0000 |
Mychaela Falconia |
fcup-smsend program put together, compiles
|
| Sun, 04 Mar 2018 23:11:51 +0000 |
Mychaela Falconia |
uptools/libcoding: implemented function for generating hex strings
|
| Sun, 04 Mar 2018 06:24:36 +0000 |
Mychaela Falconia |
uptools/libcoding: implemented generation of SMS-SUBMIT PDUs
|
| Sun, 04 Mar 2018 05:16:34 +0000 |
Mychaela Falconia |
uptools/libcoding/gsm7_encode.c: bug found on review
|
| Wed, 07 Feb 2018 07:30:22 +0000 |
Mychaela Falconia |
uptools/libcoding: SMS dest address parsing and encoding implemented
|
| Wed, 07 Feb 2018 06:50:14 +0000 |
Mychaela Falconia |
uptools/libcoding: septet to octet packing function implemented
|
| Tue, 06 Feb 2018 20:18:43 +0000 |
Mychaela Falconia |
uptools/libcoding: implemented 8859-1 -> GSM7 encoding function
|
| Tue, 06 Feb 2018 19:27:19 +0000 |
Mychaela Falconia |
uptools/libcoding: implemented 8859-1 -> GSM7 encoding table
|
| Mon, 05 Feb 2018 19:01:27 +0000 |
Mychaela Falconia |
uptools/libcoding: UTF-8 input conversion to 8859-1 implemented
|
| Mon, 05 Feb 2018 17:35:49 +0000 |
Mychaela Falconia |
fcup-smdump: -d delete-after-dump option implemented
|
| Mon, 05 Feb 2018 08:47:45 +0000 |
Mychaela Falconia |
fcup-smdump implemented, compiles
|
| Sun, 04 Feb 2018 18:44:41 +0000 |
Mychaela Falconia |
uptools/atcmd/atinterf.c: no target debug mode implemented
|
| Sun, 04 Feb 2018 18:41:44 +0000 |
Mychaela Falconia |
uptools/atcmd/atinterf.c: logic inversion error
|
| Sun, 04 Feb 2018 18:39:39 +0000 |
Mychaela Falconia |
uptools/Makefile: atcmd added
|
| Sun, 04 Feb 2018 18:38:20 +0000 |
Mychaela Falconia |
uptools/atcmd framework started
|
| Sun, 04 Feb 2018 17:05:35 +0000 |
Mychaela Falconia |
rvinterf/Makefile: rvtat added
|
| Sun, 04 Feb 2018 16:45:05 +0000 |
Mychaela Falconia |
fcup-rvtat program written, compiles
|
| Sun, 04 Feb 2018 16:05:11 +0000 |
Mychaela Falconia |
fcup-atinterf: implemented wakeup of sleeping targets
|
| Sun, 04 Feb 2018 08:23:54 +0000 |
Mychaela Falconia |
fcup-atinterf: brown paper bag
|
| Sun, 04 Feb 2018 07:58:04 +0000 |
Mychaela Falconia |
top Makefile: uptools need libserial for atinterf
|
| Sun, 04 Feb 2018 07:57:06 +0000 |
Mychaela Falconia |
uptools/Makefile: atinterf added
|
| Sun, 04 Feb 2018 07:56:21 +0000 |
Mychaela Falconia |
fcup-atinterf program written, compiles
|
| Sun, 04 Feb 2018 06:20:55 +0000 |
Mychaela Falconia |
top Makefile: uptools subdirectory added
|
| Sun, 04 Feb 2018 06:19:33 +0000 |
Mychaela Falconia |
sms-pdu-decode: fixed bug in the decoding of From/To address fields
|
| Sun, 04 Feb 2018 06:05:04 +0000 |
Mychaela Falconia |
uptools/Makefile created
|
| Sun, 04 Feb 2018 03:32:24 +0000 |
Mychaela Falconia |
sms-pdu-decode main program written, compiles
|
| Sun, 04 Feb 2018 01:03:20 +0000 |
Mychaela Falconia |
uptools/libcoding: hex dump function implemented
|
| Sun, 04 Feb 2018 00:43:14 +0000 |
Mychaela Falconia |
uptools/libcoding: SMS DCS decoding implemented
|
| Sun, 04 Feb 2018 00:01:37 +0000 |
Mychaela Falconia |
uptools/libcoding: GSM timestamp decoding implemented
|
| Sat, 03 Feb 2018 23:53:20 +0000 |
Mychaela Falconia |
uptools/libcoding: alphabetic address handling implemented
|
| Sat, 03 Feb 2018 22:57:45 +0000 |
Mychaela Falconia |
uptools/libcoding: SC address decoding implemented
|
| Sat, 03 Feb 2018 22:41:20 +0000 |
Mychaela Falconia |
uptools/libcoding: digit decoding implemented
|
| Sat, 03 Feb 2018 22:21:15 +0000 |
Mychaela Falconia |
uptools/libcoding: 7-bit decoding implemented
|
| Sat, 03 Feb 2018 20:37:14 +0000 |
Mychaela Falconia |
uptools/libcoding: hex line decoding implemented
|
| Sat, 03 Feb 2018 20:07:05 +0000 |
Mychaela Falconia |
uptools started with libcoding
|
| Sat, 20 Jan 2018 05:39:27 +0000 |
Mychaela Falconia |
CHANGES: fc-loadtool D-Sample fix documented
|
| Sat, 20 Jan 2018 05:22:54 +0000 |
Mychaela Falconia |
loadtools/scripts/dsample.config: use the new 28f640w30b chip type
|
| Sat, 20 Jan 2018 05:20:40 +0000 |
Mychaela Falconia |
fc-loadtool: support for 28F640W30B flash chip with partition quirks
|
| Fri, 29 Dec 2017 20:38:39 +0000 |
Mychaela Falconia |
compile-fc-chg: changes for FCHG v2
|
| Mon, 18 Dec 2017 21:00:46 +0000 |
Mychaela Falconia |
fc-tmsync: added pirelli-vbat-cal command to read Pirelli's ADC calibration
|
| Sun, 17 Dec 2017 03:41:05 +0000 |
Mychaela Falconia |
CHANGES: documented fc-fsio additions
|
| Sun, 17 Dec 2017 03:31:54 +0000 |
Mychaela Falconia |
fc-fsio: implemented write-battery-table and write-charging-config commands
|
| Sun, 17 Dec 2017 02:25:05 +0000 |
Mychaela Falconia |
compile-fc-chg tool written, compiles
|
| Sun, 17 Dec 2017 00:59:53 +0000 |
Mychaela Falconia |
ffstools/Makefile: newcomp added to SUBDIR
|
| Sun, 17 Dec 2017 00:57:42 +0000 |
Mychaela Falconia |
compile-fc-batt tool written, compiles
|
| Wed, 22 Nov 2017 19:15:29 +0000 |
Mychaela Falconia |
CHANGES: fc-tmsh auw-fir command addition documented
|
| Wed, 22 Nov 2017 19:08:38 +0000 |
Mychaela Falconia |
fc-tmsh: auw-fir command implemented
|
| Wed, 22 Nov 2017 18:52:47 +0000 |
Mychaela Falconia |
librftab: implemented reading of FIR coefficient tables
|
| Wed, 22 Nov 2017 18:12:04 +0000 |
Mychaela Falconia |
librftab: reading of Tx ramp template files split from rftablerd module
|
| Wed, 22 Nov 2017 06:23:52 +0000 |
Mychaela Falconia |
fc-fsio help: upload-rf-table addition documented
|
| Wed, 22 Nov 2017 05:46:28 +0000 |
Mychaela Falconia |
CHANGES: c1xx-calextr and RF table changes documented
|
| Wed, 22 Nov 2017 05:20:57 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: fc-tmsync documented
|
| Wed, 22 Nov 2017 05:03:15 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: fc-readcal documented
|
| Wed, 22 Nov 2017 04:49:29 +0000 |
Mychaela Falconia |
doc/RF_tables: updated for the newly implemented more complete support
|
| Wed, 22 Nov 2017 04:47:36 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: fc-cal2bin documented
|
| Tue, 21 Nov 2017 06:48:44 +0000 |
Mychaela Falconia |
fc-fsio upload-rf-table implemented
|
| Tue, 21 Nov 2017 06:09:35 +0000 |
Mychaela Falconia |
fc-fsio: write_buf_to_file() function made global in prep for upload-rf-table
|
| Mon, 20 Nov 2017 17:51:23 +0000 |
Mychaela Falconia |
doc/Compal-calibration: fc-readcal failed approach documented
|
| Mon, 20 Nov 2017 16:24:22 +0000 |
Mychaela Falconia |
doc/Compal-calibration: c1xx-calextr handles Rx calchan now
|
| Mon, 20 Nov 2017 06:10:54 +0000 |
Mychaela Falconia |
c1xx-calextr: Rx calchan conversion implemented
|
| Sun, 19 Nov 2017 23:10:07 +0000 |
Mychaela Falconia |
doc/Compal-calibration: Rx calchan ranges documented
|
| Sun, 19 Nov 2017 22:37:16 +0000 |
Mychaela Falconia |
c1xx-calextr: preparations for Rx calchan conversion
|
| Sun, 19 Nov 2017 21:45:12 +0000 |
Mychaela Falconia |
started documenting c1xx-calextr
|
| Sat, 18 Nov 2017 18:02:42 +0000 |
Mychaela Falconia |
c1xx-calextr: off-by-1 error in the Tx levels table conversion
|
| Sat, 18 Nov 2017 17:58:35 +0000 |
Mychaela Falconia |
c1xx-calextr: output implemented
|
| Sat, 18 Nov 2017 17:45:10 +0000 |
Mychaela Falconia |
c1xx-calextr: table conversion implemented
|
| Sat, 18 Nov 2017 17:30:26 +0000 |
Mychaela Falconia |
c1xx-calextr: preparations for both ASCII and binary output
|
| Sat, 18 Nov 2017 17:15:54 +0000 |
Mychaela Falconia |
c1xx-calextr will need mkdir and librftab
|
| Sat, 18 Nov 2017 17:12:20 +0000 |
Mychaela Falconia |
c1xx-calextr started
|
| Sat, 18 Nov 2017 07:39:23 +0000 |
Mychaela Falconia |
ffstools/Makefile: caltools added to SUBDIR
|
| Sat, 18 Nov 2017 07:38:36 +0000 |
Mychaela Falconia |
fc-cal2bin written, compiles
|
| Sat, 18 Nov 2017 06:47:38 +0000 |
Mychaela Falconia |
fc-tmsync: ttr-all implemented
|
| Sat, 18 Nov 2017 06:35:13 +0000 |
Mychaela Falconia |
fc-tmsync: rftr save to file implemented
|
| Sat, 18 Nov 2017 02:01:57 +0000 |
Mychaela Falconia |
fc-cal2text changed to emit Tx ramps for each band as a single table
|
| Sat, 18 Nov 2017 01:13:03 +0000 |
Mychaela Falconia |
rvinterf/tmsh: old rftable{rd,wr}.c deleted (moved to librftab)
|
| Sat, 18 Nov 2017 00:32:16 +0000 |
Mychaela Falconia |
fc-tmsh converted to link with librftab
|
| Sat, 18 Nov 2017 00:26:24 +0000 |
Mychaela Falconia |
fc-tmsync converted to link with librftab
|
| Sat, 18 Nov 2017 00:20:36 +0000 |
Mychaela Falconia |
fc-cal2text converted to link with librftab
|
| Sat, 18 Nov 2017 00:06:34 +0000 |
Mychaela Falconia |
librftab added to top Makefile as dependency for ffstools and rvinterf
|
| Sat, 18 Nov 2017 00:01:31 +0000 |
Mychaela Falconia |
librftab reader: implemented reading of Tx ramps tables
|
| Fri, 17 Nov 2017 23:48:49 +0000 |
Mychaela Falconia |
librftab writer: added function to write Tx ramps tables
|
| Fri, 17 Nov 2017 23:46:27 +0000 |
Mychaela Falconia |
librftab compiles
|
| Fri, 17 Nov 2017 23:43:38 +0000 |
Mychaela Falconia |
librftab started with rftablerd.c and rftablewr.c from rvinterf/tmsh
|
| Fri, 17 Nov 2017 04:38:11 +0000 |
Mychaela Falconia |
fc-readcal: fixed bug in the shifting of afcdac
|
| Fri, 17 Nov 2017 01:22:06 +0000 |
Mychaela Falconia |
fc-readcal written, compiles
|
| Fri, 17 Nov 2017 00:37:52 +0000 |
Mychaela Falconia |
etmsync l1tmops module: need to return on errors, not exit
|
| Fri, 17 Nov 2017 00:26:09 +0000 |
Mychaela Falconia |
etmsync: host_mkdir() function factored out of fc-fsio
|
| Fri, 17 Nov 2017 00:03:21 +0000 |
Mychaela Falconia |
fc-tmsync: missed newline at the end of rfpr output
|
| Thu, 16 Nov 2017 23:44:48 +0000 |
Mychaela Falconia |
fc-tmsync: L1TM operation commands hooked in
|
| Thu, 16 Nov 2017 23:33:50 +0000 |
Mychaela Falconia |
fc-tmsync: user command wrappers implemented
|
| Thu, 16 Nov 2017 19:26:24 +0000 |
Mychaela Falconia |
etmsync l1tmops module: ttr implemented
|
| Thu, 16 Nov 2017 19:14:52 +0000 |
Mychaela Falconia |
etmsync l1tmops module: rfpr implemented
|
| Thu, 16 Nov 2017 19:00:05 +0000 |
Mychaela Falconia |
etmsync: l1tmops module compiles and links into fc-tmsync
|
| Thu, 16 Nov 2017 18:43:52 +0000 |
Mychaela Falconia |
fc-tmsync skeleton started
|
| Thu, 16 Nov 2017 04:41:39 +0000 |
Mychaela Falconia |
CHANGES: fc-fsio pirelli-magnetite-init change documented
|
| Thu, 16 Nov 2017 04:35:05 +0000 |
Mychaela Falconia |
fc-fsio pirelli-magnetite-init: added /gsm/rf/afcdac record missed earlier
|
| Fri, 20 Oct 2017 03:58:13 +0000 |
Mychaela Falconia |
CHANGES: removal of ffstools/aud-fcdev3b is the first post-r7 change
|
| Fri, 20 Oct 2017 03:41:30 +0000 |
Mychaela Falconia |
.hgignore: removed the entries for ffstools/aud-*
|
| Fri, 20 Oct 2017 03:40:25 +0000 |
Mychaela Falconia |
ffstools/aud-fcdev3b removed: migrated to the new fc-audio-config repository
|
| Fri, 29 Sep 2017 01:04:54 +0000 |
Mychaela Falconia |
CHANGES: fc-host-tools-r7 released
|
| Thu, 28 Sep 2017 18:53:34 +0000 |
Mychaela Falconia |
INSTALL: libserial and Linux specifics documented
|
| Thu, 28 Sep 2017 17:51:17 +0000 |
Mychaela Falconia |
doc/Audio-mode-config: typo fix
|
| Thu, 28 Sep 2017 08:02:03 +0000 |
Mychaela Falconia |
CHANGES: added pointer to doc/High-speed-serial in the serial change blurb
|
| Thu, 28 Sep 2017 07:55:58 +0000 |
Mychaela Falconia |
linux-2.6.37.6-ftdi_sio.c.patch moved from doc to old
|
| Thu, 28 Sep 2017 07:53:50 +0000 |
Mychaela Falconia |
doc/High-speed-serial: update/rewrite for the new FTDI support
|
| Fri, 22 Sep 2017 22:36:13 +0000 |
Mychaela Falconia |
CHANGES: libserial change documented
|
| Fri, 22 Sep 2017 22:04:38 +0000 |
Mychaela Falconia |
libserial-newlnx is now the new official libserial
|
| Fri, 22 Sep 2017 00:19:41 +0000 |
Mychaela Falconia |
libserial-newlnx: new way implemented, compiles
|
| Fri, 22 Sep 2017 00:09:37 +0000 |
Mychaela Falconia |
beginning of libserial-newlnx: copy of libserial-orig
|
| Thu, 21 Sep 2017 23:45:05 +0000 |
Mychaela Falconia |
rvinterf and friends converted to use libserial
|
| Thu, 21 Sep 2017 23:30:53 +0000 |
Mychaela Falconia |
set_serial_nonblock() added to libserial
|
| Thu, 21 Sep 2017 23:25:02 +0000 |
Mychaela Falconia |
fc-serterm converted to use libserial
|
| Thu, 21 Sep 2017 23:07:01 +0000 |
Mychaela Falconia |
loadtools reworked to use factored-out libserial
|
| Thu, 21 Sep 2017 21:49:07 +0000 |
Mychaela Falconia |
libserial hooked into the top level Makefile
|
| Thu, 21 Sep 2017 21:43:34 +0000 |
Mychaela Falconia |
beginning of factored-out libserial
|
| Thu, 21 Sep 2017 20:04:12 +0000 |
Mychaela Falconia |
doc/Audio-mode-config: fixed logic error in the description of extra-gain
|
| Sat, 26 Aug 2017 05:17:49 +0000 |
Mychaela Falconia |
tiaud-compile: max FIR coefficient number is 30, not 31
|
| Sat, 26 Aug 2017 04:50:25 +0000 |
Mychaela Falconia |
doc/Audio-mode-config written
|
| Sat, 26 Aug 2017 01:34:40 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: tiaud-compile and tiaud-mkvol documented
|
| Sat, 26 Aug 2017 01:23:34 +0000 |
Mychaela Falconia |
CHANGES: first changes since fc-host-tools-r6
|
| Sat, 26 Aug 2017 01:07:16 +0000 |
Mychaela Falconia |
ffstools/aud-fcdev3b: created some audio config tables for FCDEV3B
|
| Fri, 25 Aug 2017 23:57:32 +0000 |
Mychaela Falconia |
tiaud-mkvol program written
|
| Fri, 25 Aug 2017 23:36:07 +0000 |
Mychaela Falconia |
tiaud-compile program written
|
| Mon, 21 Aug 2017 19:04:28 +0000 |
Mychaela Falconia |
CHANGES: fc-host-tools-r6 released
|
| Sun, 20 Aug 2017 18:40:03 +0000 |
Mychaela Falconia |
CHANGES: exitcodes.h addition documented
|
| Sun, 20 Aug 2017 18:18:14 +0000 |
Mychaela Falconia |
rvinterf/include/exitcodes.h: added ERROR_RFFAIL for fc-rfcal-tools
|
| Sun, 20 Aug 2017 17:37:45 +0000 |
Mychaela Falconia |
doc/Loadtools-usage: fc-loadtool batch mode documented
|
| Thu, 17 Aug 2017 05:27:43 +0000 |
Mychaela Falconia |
fc-rfcal-tools now public, old frozen rfcal code can be removed
|
| Sat, 12 Aug 2017 17:37:02 +0000 |
Mychaela Falconia |
CHANGES: fc-fsio format change documented
|
| Sat, 12 Aug 2017 17:31:50 +0000 |
Mychaela Falconia |
fc-fsio format command: don't stop scripts on NOPREFORMAT error,
|
| Fri, 04 Aug 2017 08:06:36 +0000 |
Mychaela Falconia |
fc-loadtool batch mode: added -B option
|
| Thu, 03 Aug 2017 03:21:39 +0000 |
Mychaela Falconia |
CHANGES: first changes since fc-host-tools-r5
|
| Thu, 03 Aug 2017 02:12:56 +0000 |
Mychaela Falconia |
fc-loadtool: automated command script mode implemented
|
| Thu, 03 Aug 2017 01:33:06 +0000 |
Mychaela Falconia |
loadtools: preparations for loadtool exit code possibly being nonzero
|
| Thu, 03 Aug 2017 01:25:40 +0000 |
Mychaela Falconia |
loadtool.help: exec command description updated
|
| Thu, 03 Aug 2017 01:21:45 +0000 |
Mychaela Falconia |
fc-loadtool: exec command now looks for scripts in the current directory
|
| Thu, 03 Aug 2017 00:37:59 +0000 |
Mychaela Falconia |
loadtools and rvinterf: set TIOCEXCL on the tty
|
| Sat, 20 May 2017 22:53:22 +0000 |
Mychaela Falconia |
CHANGES: fc-host-tools-r5 released
|
| Sat, 20 May 2017 22:13:03 +0000 |
Mychaela Falconia |
CHANGES: documented the addition of keepalive support to rvinterf
|
| Sat, 20 May 2017 22:05:46 +0000 |
Mychaela Falconia |
doc/RVTMUX: keepalive mechanism documented
|
| Sat, 20 May 2017 21:00:15 +0000 |
Mychaela Falconia |
rvinterf: implemented keepalive mechanism
|
| Sat, 20 May 2017 20:04:35 +0000 |
Mychaela Falconia |
rvinterf/Makefile: install include files in /opt/freecalypso/include/rvinterf
|
| Sat, 20 May 2017 19:57:49 +0000 |
Mychaela Falconia |
rvinterf/include/exitcodes.h: added ERROR_RFTEST for use by autocal tools
|
| Sat, 20 May 2017 19:43:49 +0000 |
Mychaela Falconia |
rfcal migration
|
| Sat, 20 May 2017 18:28:34 +0000 |
Mychaela Falconia |
doc/TIFFS-IVA-usage updated
|
| Sat, 20 May 2017 18:10:49 +0000 |
Mychaela Falconia |
ffstools/README renamed to README.old,
|
| Sat, 20 May 2017 12:48:38 +0000 |
Mychaela Falconia |
doc/Host-tools-overview: updated and simplified
|
| Fri, 19 May 2017 06:57:19 +0000 |
Mychaela Falconia |
doc/Loadtools-on-GTA0x article added, replacing the corresponding section
|
| Fri, 19 May 2017 06:29:06 +0000 |
Mychaela Falconia |
loadtools/gta-ap-build.sed: don't build fc-compalram or fc-buzplay for GTA0x AP
|
| Fri, 19 May 2017 06:11:27 +0000 |
Mychaela Falconia |
loadtools/README renamed to README.old, previous README.old to README.older
|
| Fri, 19 May 2017 05:41:12 +0000 |
Mychaela Falconia |
INSTALL: added blurb about target binaries in packaged releases
|
| Fri, 19 May 2017 00:31:54 +0000 |
Mychaela Falconia |
README: minor updates
|
| Thu, 18 May 2017 23:32:31 +0000 |
Mychaela Falconia |
CHANGES: documented newly added utilities
|
| Thu, 18 May 2017 22:52:12 +0000 |
Mychaela Falconia |
doc/Loadtools-usage: replacing loadtools/README
|
| Thu, 18 May 2017 07:24:07 +0000 |
Mychaela Falconia |
INSTALL: cosmetic fix in bullet point numbering
|
| Sun, 14 May 2017 23:09:27 +0000 |
Mychaela Falconia |
rfcal/Makefile: tsid-test added to SUBDIR
|
| Sun, 14 May 2017 00:34:23 +0000 |
Mychaela Falconia |
fc-tsid-shell (fc-cmu200d development aid) written
|
