libgsmhr1 RxFE: store CN R0+LPC separately from speech In the original GSM 06.06 code the ECU for speech mode is entirely separate from the CN generator, maintaining separate state. (The main intertie between them is the speech vs CN state variable, distinguishing between speech and CN BFIs, in addition to the CN-specific function of distinguishing between initial and update SIDs.) In the present RxFE implementation I initially thought that we could use the same saved_frame buffer for both ECU and CN, overwriting just the first 4 params (R0 and LPC) when a valid SID comes in. However, I now realize it was a bad idea: the original code has a corner case (long sequence of speech-mode BFIs to put the ECU in state 6, then SID and CN-mode BFIs, then a good speech frame) that would be broken by that buffer reuse approach. We could eliminate this corner case by resetting the ECU state when passing through a CN insertion period, but doing so would needlessly increase the behavioral diffs between GSM 06.06 and our version. Solution: use a separate CN-specific buffer for CN R0+LPC parameters, and match the behavior of GSM 06.06 code in this regard.

/*
 * The function implemented in this module is an aid for AMR-EFR interworking;
 * it is meant to be invoked directly after amr_encode_frame().  It checks
 * the encoder output for MR122 DHF and turns it into EFR DHF just like
 * amr_dhf_subst_efr(), but only if the input PCM frame was an EHF.  This
 * slightly more complicated logic is needed in order to replicate the observed
 * behavior of AMR-EFR speech encoder in the extant GSM network of T-Mobile USA.
 */

#include "tw_amr.h"
#include "namespace.h"
#include "e_homing.h"

void amr_dhf_subst_efr2(struct amr_param_frame *frame, const int16_t *pcm)
{
	if (encoder_homing_frame_test(pcm))
		amr_dhf_subst_efr(frame);
}