--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/g23m/condat/ms/src/aci/aci_slock.h	Mon Jun 01 03:24:05 2015 +0000
@@ -0,0 +1,283 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  
+|  Modul   :  J:\g23m-aci\aci\aci_slock.h
++----------------------------------------------------------------------------- 
+|  Copyright 2002 Texas Instruments Berlin, AG 
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  
++----------------------------------------------------------------------------- 
+*/ 
+
+#ifndef ACI_SLOCK_H
+#define ACI_SLOCK_H
+
+#ifdef SIM_PERS
+/* Shared globals ------------------------------------------------ */
+
+typedef struct{
+  T_SIMLOCK_STATUS status[SIMLOCK_FIRST_SIM+1];  /* lint */   /* one status for every personalisation lock type */
+  UINT16 dependency[SIMLOCK_FIRST_SIM+1];
+  UBYTE blocked;                 /* blocked flag */
+  T_SIMLOCK_TYPE current_lock;            /* currently checked lock */
+  UBYTE pb_load ; 
+  T_SIMLOCK_CHECK check_lock; 
+  T_SIMLOCK_TYPE lock_type; 
+  CHAR  * lock_passwd; 
+}T_ACI_SLOCK_SHARED;
+
+
+EXTERN T_ACI_SLOCK_SHARED AciSLockShrd;
+EXTERN UBYTE sim_code_present_in_me;
+#endif
+
+#define NOT_PRESENT_8BIT  0xFF
+#define MAX_GID 5
+#define MAX_AD 0
+#define CHECK_FAIL 2
+
+#ifdef SIM_PERS
+/*Max number of user codes for each category- To be defined*/
+#define MAX_NW_USER_CODES  20
+#define MAX_NS_USER_CODES  10
+#define MAX_SP_USER_CODES  10
+#define MAX_CP_USER_CODES  10
+#define MAX_SIM_USER_CODES 10
+/*Normal code length for each category*/ 
+#define NW_USER_CODE_LEN  3
+#define NS_USER_CODE_LEN  4
+#define SP_USER_CODE_LEN  7
+#define CP_USER_CODE_LEN  11
+#define SIM_USER_CODE_LEN 8
+
+#define MAX_NUM_USERCODE_SIZE 1  
+#define NUM_OPCODE_SIZE 1  
+#define NUM_USER_CODE_SIZE 1
+#define CURR_USER_CODE_INDEX_SIZE 1
+#define OPCODE_LEN_SIZE 1 // can be 2 
+#define OPCODE_LEN_INDEX 2 
+#define CODE_TYPE_SIZE 1
+
+#define FC_MAX_INFINITE 0xff  //04-08-2005
+
+
+ /*
+ *  BCD length 
+ */
+#define NW_CODE_LEN 4    // Parity +MNC + MCC may require 4 bytes in packed bcd format if MNC length is 3
+#define NS_CODE_LEN 1   // NS requires 1 byte  in packed bcd format 
+#define NW_NS_CODE_LEN 5
+#define NW_NS_MSIN_CODE_LEN 8
+#define NW_NS_MSIN_MSIN_CODE_LEN 13
+#define NW_NS_NS_CODE_LEN 6
+#define NW_DIGIT_MAP_TABLE_LEN 24  // Network code (4) + digit mapping table (10 * 2) 
+
+
+#define NORMAL_CODE 0x0a
+#define INTERVAL_TYPE1 0x0b  // Range 
+#define INTERVAL_TYPE2 0x0d  // digit interval 
+#define REGULAR_EXP 0x0c // Regular expession 
+
+#define GID1_LEN 4  // GID1 is not stored in BCD format
+#define GID2_LEN 4  // GID2 is not stored in BCD format
+#define GID_LEN_TO_BE_COMPARED 1  //depends on what the length is in the sim
+
+ enum
+{     
+  ALWAYS_ACCEPTED=0x00,
+  ALWAYS_REJECTED= 0x01,
+  UNTIL_NORMAL_SIM=0x02
+} ;
+
+typedef enum
+{
+  SIM_NORMAL =0,
+  SIM_TYPEAPPROVAL,
+  SIM_TEST
+}T_SIM_TYPE ;
+
+#endif
+
+/* SIM configuration information */
+typedef struct
+{
+   UBYTE deper_key [16];
+   UBYTE phase;
+   UBYTE oper_mode;       /* SIM card functionality   */
+   UBYTE pref_lang[5];
+   UBYTE access_acm;
+   UBYTE access_acmmax;
+   UBYTE access_puct;
+   UBYTE sim_gidl1[MAX_GID];
+   UBYTE sim_gidl2[MAX_GID];
+  #ifdef SIM_PERS
+   T_SIM_TYPE sim_type;  /*   */
+   UBYTE sim_read_gid1;  /* added for SP, CP */
+   UBYTE sim_read_gid2;  /* added for SP, CP */
+   UBYTE gid1_len; 
+   UBYTE gid2_len; 
+   UBYTE sim_read_ad_first_byte;
+   #endif
+
+} T_ACI_SIM_CONFIG; // This is the same as T_MFW_SIM_CONFIG
+
+
+/* Prototypes ----------------------------------------------------*/
+
+
+
+
+#ifdef SIM_PERS
+/*
+  Initialising of this module. Has to be called first and *once only* before calling any other method.
+*/
+void aci_slock_init ( void );
+
+/*
+  Reset the aci_slock variables
+*/
+void aci_slock_reset(); 
+
+
+/*
+  Unlocks the lock of the given type after verifying the given password.
+  The ACI extension for password verifying (see 2.3.9.1) will be used to
+  determine if the given password is correct or not.
+  On a successful unlock the actual status of the lock will be returned.
+  If an error occurred SIMLOCK_FAIL will be returned.
+  (Uses the ACI extension "personalisation data access".)
+  */
+T_SIMLOCK_STATUS aci_slock_authenticate ( T_SIMLOCK_TYPE type, char *passwd );
+
+
+/*
+ ACI method for retrieving the status of a single personalisation type. This method calls extension 
+ methods which in turn calls Security Drv. API and retrn the status of a personalisation category.
+ The personalisation status is stored in MEPD which is directly accessed by Security Drv. 
+ Added on 11/03/2005
+*/
+
+T_SIMLOCK_STATUS aci_personalisation_get_status ( T_SIMLOCK_TYPE personalisation_type );
+#endif
+#ifdef SIM_PERS
+
+
+/*
+  Locks the lock of the given type.  On a successful lock the actual
+  status of the lock will be returned. If an error occurred SIMLOCK_FAIL
+  will be returned. This method will use the ACI extension for password
+  verifying (see 2.3.9.1) to determine if the given password is correct
+  or not. (Uses the ACI extension "personalisation data access".)
+  */
+T_SIMLOCK_STATUS aci_slock_lock ( T_SIMLOCK_TYPE type, char *passwd );
+
+/*
+For Failure Counter reset. Use extension methods
+added on 11/03/2005
+*/
+T_OPER_RET_STATUS aci_slock_reset_fc ( char *fcKey );
+
+/*--------------------------------------
+For Supplementary Info( e.g. FC MAX, MC Current value).
+Uses extension method aci_slock_sup_info
+added on 11/03/2005
+----------------------------------------*/
+T_OPER_RET_STATUS aci_slock_sup_info(T_SUP_INFO *sup_info);
+
+
+/* change the password */
+T_SIMLOCK_STATUS aci_slock_change_password ( T_SIMLOCK_TYPE type, char *passwd, char *new_passwd );
+
+
+
+#endif
+/*
+  Unlocks the lock of the given type after verifying the given password.
+  The ACI extension for password verifying (see 2.3.9.1) will be used to
+  determine if the given password is correct or not.
+  On a successful unlock the actual status of the lock will be returned.
+  If an error occurred SIMLOCK_FAIL will be returned.
+  (Uses the ACI extension "personalisation data access".)
+  */
+T_SIMLOCK_STATUS aci_slock_unlock ( T_SIMLOCK_TYPE type, char *passwd );
+/*
+  Checks for all kinds of personalisation locks. The given IMSI will be checked against the internal 
+  personalisation data. Returns SIMLOCK_BLOCKED, if one lock was not matching the given IMSI.
+  */
+T_SIMLOCK_STATUS aci_slock_checkpersonalisation( T_SIMLOCK_TYPE   current_lock );
+
+
+/*
+  PURPOSE : Install information found in the primitive into configuration buffers.
+*/
+void aci_slock_sim_init ( T_SIM_MMI_INSERT_IND *sim_mmi_insert_ind );
+
+
+/*
+  PURPOSE : read SIM group identifier 1 from SIM card
+
+*/
+void aci_slock_sim_gid1_cnf(USHORT error, UBYTE *data);
+
+/*
+  PURPOSE : read SIM group identifier 2 from SIM card
+
+*/
+void aci_slock_sim_gid2_cnf(USHORT error, UBYTE *data);
+
+
+
+/*
+   PURPOSE :   Call back for SIM read.
+
+*/
+void aci_slock_sim_read_sim_cb(SHORT table_id);
+
+/*
+   PURPOSE :   Request to read SIM card.
+
+*/
+void aci_slock_sim_read_sim(USHORT data_id, UBYTE len, UBYTE max_length);
+
+#ifdef SIM_PERS
+/*
+
+PURPOSE :   Setting the sim_type value (Normal, Test SIM, Type Approval SIM)
+
+*/
+
+void aci_slock_set_simtype(T_SIM_TYPE sim_type );
+
+/*
+PURPOSE : To set global variable for configuration data ( part1 of Security Driver) 
+*/
+void aci_slock_set_CFG(void);
+
+
+void aci_slock_check_NWlock( UBYTE* imsi_sim, UBYTE  personalisation  );
+
+void aci_slock_check_NSlock( UBYTE* imsi_sim, UBYTE  personalisation  );
+
+void aci_slock_check_SPlock( UBYTE* imsi_sim, UBYTE  personalisation );
+void aci_slock_check_CPlock( UBYTE* imsi_sim, UBYTE  personalisation);
+
+void aci_slock_check_SMlock( UBYTE* imsi_sim, UBYTE  personalisation);
+
+GLOBAL void aci_slock_psaSIM_decodeIMSI (UBYTE* imsi_field,  UBYTE  imsi_c_field, CHAR* imsi_asciiz);
+
+GLOBAL void aci_slock_psaSIM_decodeIMSI_without_parity(UBYTE* imsi_field,  UBYTE  imsi_c_field,  CHAR* imsi_asciiz);
+
+GLOBAL void aci_set_cme_error(T_SIMLOCK_TYPE slocktype);
+GLOBAL void aci_set_cme_error_code(T_SIMLOCK_TYPE current_lock , T_ACI_CME_ERR *err_code);
+
+#endif //SIM_PERS
+#endif /* ACI_SLOCK_H */
\ No newline at end of file