FreeCalypso > hg > tcs211-c139

comparison chipsetsw/layer1/gtt_include/ctm/wait_for_sync.h @ 0:509db1a7b7b8

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
initial import: leo2moko-r1
author Space Falcon <falcon@ivan.Harhan.ORG>
date Mon, 01 Jun 2015 03:24:05 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:509db1a7b7b8
1 /*
2 *******************************************************************************
3 *
4 * COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
5 * 90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100
6 *
7 * The program(s) may be used and/or copied only with the
8 * written permission from Ericsson or in accordance
9 * with the terms and conditions stipulated in the agreement or
10 * contract under which the program(s) have been supplied.
11 *
12 *******************************************************************************
13 *
14 * File : wait_for_sync.h
15 * Purpose : synchronization routine for the deinterleaver
16 *
17 *******************************************************************************
18 */
19 #ifndef wait_for_sync_h
20 #define wait_for_sync_h "$Id: $"
21
22 /*
23 *******************************************************************************
24 * INCLUDE FILES
25 *******************************************************************************
26 */
27
28 #include "ctm_typedefs.h"
29
30 /*
31 *******************************************************************************
32 * DECLARATION OF PROTOTYPES
33 *******************************************************************************
34 */
35
36 typedef struct {
37 WORD16 *shift_reg; /* shift register */
38 WORD16 *m_sequence; /* maximum length sequence (preamble) */
39 WORD16 *m_sequence_resync; /* maximum length sequence (resync) */
40 WORD16 *sync_index_vec; /* positions/indices of the preamble */
41 WORD16 *resync_index_vec; /* positions/indices of the resync sequence */
42 WORD16 length_shift_reg; /* length of the vector shift_reg */
43 WORD16 offset; /* */
44 WORD16 num_sync_bits; /* length of the preamble */
45 BOOL sync_found; /* true if receiver is "in sync" */
46 BOOL alreadyCTMreceived; /* true if burst has been received earlier */
47 WORD16 *xcorr1_shiftreg;
48 WORD16 *xcorr2_shiftreg;
49 UWORD16 cntSymbolsSinceEndOfBurst;
50 } wait_for_sync_state_t;
51
52
53
54 /* ----------------------------------------------------------------------- */
55 /* Function init_wait_for_sync() */
56 /* ***************************** */
57 /* Initialization of the synchronization detector. The dimensions of the */
58 /* corresponding interleaver at the TX side must be specified: */
59 /* B (horizontal) blocklength */
60 /* D (vertical) interlace factor */
61 /* num_sync_lines2 number of interleaver lines with additional sync bits */
62 /* ptr_wait_state pointer to the state variable of the sync detector */
63 /* ----------------------------------------------------------------------- */
64
65 void init_wait_for_sync(wait_for_sync_state_t *ptr_wait_state,
66 WORD16 B, WORD16 D,
67 WORD16 num_sync_lines2);
68
69 /*
70 ***********************************************************************
71 * Shutdown_wait_for_sync() *
72 * ************************ *
73 * Deallocate dyamically created buffers. *
74 * *
75 * Input variables: *
76 * intl_state : pointer to a variable of wait_for_sync_state_t *
77 * containing the wait_for_sync state machine. *
78 ***********************************************************************
79 */
80 void Shutdown_wait_for_sync(wait_for_sync_state_t *ptr_wait_state);
81
82 /* ----------------------------------------------------------------------- */
83 /* Function reinit_wait_for_sync() */
84 /* ******************************* */
85 /* Reinitialization of synchronization detector. This function is used in */
86 /* case that a burst has been finished and the transmitter has switched */
87 /* into idle mode. After calling reinit_wait_for_sync(), the function */
88 /* wait_for_sync() inhibits the transmission of the demodulated bits to */
89 /* the deinterleaver, until the next synchronization sequence can be */
90 /* detected. */
91 /* ----------------------------------------------------------------------- */
92
93 void reinit_wait_for_sync(wait_for_sync_state_t *ptr_wait_state);
94
95
96
97 /* ----------------------------------------------------------------------- */
98 /* Function wait_for_sync() */
99 /* ************************ */
100 /* This function shall be inserted between the demodulator and the */
101 /* deinterleaver. The function searches the synchronization bitstream */
102 /* and cuts all received heading bits. As long as no sync is found, this */
103 /* function returns *ptr_num_valid_out_bits=0 so that the main program */
104 /* is able to skip the deinterleaver as long as no valid bits are */
105 /* available. If the sync info is found, the complete internal shift */
106 /* register is copied to out_bits so that wait_for_sync can be transparent */
107 /* and causes no delay for future calls. */
108 /* *ptr_wait_interval returns a value of 0 after such a synchronization */
109 /* indicating that this was a regular synchronization. */
110 /* */
111 /* Regularly, the initial preamble of each burst is used as sync info. */
112 /* In addition, the resynchronization sequences, which occur periodically */
113 /* during a running burst, are used as "back-up" synchronization in order */
114 /* to avoid loosing all characters of a burst, if the preamble was not */
115 /* detected. */
116 /* If the receiver is already synchronized on a running burst */
117 /* and the resynchronization sequence is detected, *ptr_resync_detected */
118 /* returns a non-negative value in the range 0...num_in_bits-1 indicating */
119 /* at which bit the resynchronization sequence has been detected. If no */
120 /* resynchronization has been detected, *ptr_resync_detected is -1. */
121 /* If the receiver is NOT synchronized and the resynchronization sequence */
122 /* is detected, the resynchronization sequence is used as initial */
123 /* synchronization. *ptr_wait_interval returns a value of 32 in this case */
124 /* due to the different alignments of the synchronizations based on the */
125 /* preamble or the resynchronization sequence, respectively. */
126 /* */
127 /* In order to carry all bits, the minimum length of the vector out_bits */
128 /* must be: */
129 /* in_bits.size()-1 + ptr_wait_state->shift_reg_length */
130 /* */
131 /* in_bits Vector with bits from the demodulator. The */
132 /* vector's length can be arbitrarily chosen, */
133 /* i.e. according to the block length of the */
134 /* signal processing of the main program. */
135 /* num_in_bits length of vector in_bits */
136 /* num_received_idle_symbols number of idle symbols received coherently */
137 /* out_bits Vector with bits for the deinterleaver. */
138 /* The number of the valid bits is indicated */
139 /* by *ptr_num_valid_out_bits. */
140 /* *ptr_num_valid_out_bits returns the number of valid output bits */
141 /* *ptr_wait_interval returns either 0 or 32 */
142 /* *ptr_resync_detected returns a value -1, 0,...num_in_bits */
143 /* *ptr_early_muting_required returns whether the original audio signal */
144 /* must not be forwarded. This is to guarantee */
145 /* that the preamble or resync sequence is */
146 /* detected only by the first CTM device, if */
147 /* several CTM devices are cascaded */
148 /* subsequently. */
149 /* *ptr_wait_state state information. This variable must be */
150 /* initialized with init_wait_for_sync() */
151 /* ----------------------------------------------------------------------- */
152
153 #if(TTY_SYNC_MCU_2 == 0)
154 BOOL wait_for_sync(WORD16 *out_bits,
155 WORD16 *in_bits,
156 WORD16 num_in_bits,
157 WORD16 num_received_idle_symbols,
158 WORD16 *ptr_num_valid_out_bits,
159 WORD16 *ptr_wait_interval,
160 WORD16 *ptr_resync_detected,
161 BOOL *ptr_early_muting_required,
162 wait_for_sync_state_t *ptr_wait_state);
163 #else
164 BOOL wait_for_sync(WORD16 *out_bits,
165 WORD16 *in_bits,
166 WORD16 num_in_bits,
167 WORD16 num_received_idle_symbols,
168 WORD16 *ptr_num_valid_out_bits,
169 WORD16 *ptr_wait_interval,
170 WORD16 *ptr_resync_detected,
171 BOOL *ptr_early_muting_required,
172 wait_for_sync_state_t *ptr_wait_state,
173 BOOL *sync_after_resync);
174 #endif
175
176
177
178
179 /* ----------------------------------------------------------------------- */
180 /* Function generate_resync_sequence() */
181 /* *********************************** */
182 /* Generation of the sequence for resynchronization. The sequence, which */
183 /* has a length according to the value of the constant RESYNC_SEQ_LENGTH, */
184 /* is written to the vector *sequence, which must have been allocated */
185 /* before calling this function. */
186 /* ----------------------------------------------------------------------- */
187
188 void generate_resync_sequence(WORD16 *sequence);
189
190
191 #endif
192