--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/chipsetsw/drivers/drv_app/kpd/kpd_cfg.h	Mon Jun 01 03:24:05 2015 +0000
@@ -0,0 +1,201 @@
+/**
+ * @file   kpd_cfg.h
+ *
+ * Configuration file for keypad driver.
+ *
+ * This file is part of the keypad API.
+ *
+ * @author   Laurent Sollier (l-sollier@ti.com)
+ * @version 0.1
+ */
+
+/*
+ * History:
+ *
+ *   Date          Author       Modification
+ *  ----------------------------------------
+ *  10/11/2001     L Sollier    Create
+ *
+ *
+ * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved
+ */
+
+#ifndef _KPD_CFG_H_
+#define _KPD_CFG_H_
+
+#ifndef _WINDOWS
+   #include "config/board.cfg"
+   #include "config/chipset.cfg"
+#endif
+
+/** Define the number of physical keys on the keypad (including PWR key).
+ */
+#if (BOARD == 7) || (BOARD == 8) || (BOARD == 9)
+   #define KPD_NB_PHYSICAL_KEYS (18)
+
+#elif (BOARD == 40) || (BOARD == 41) || (BOARD == 42) || (BOARD == 43) || (BOARD == 34) || (BOARD == 35) || (defined _WINDOWS)
+   #define KPD_NB_PHYSICAL_KEYS (24)
+#endif
+
+
+#if (CHIPSET == 12)
+
+  #define SetGroupBits16(registre,position,number,value) {\
+                                                      UINT16 tmp=registre;\
+                                                      volatile UINT16 tmpvalue;\
+                                                      tmpvalue = (value<<(16-(number)));\
+                                                      tmpvalue = (tmpvalue>>(16-(number)));\
+                                                      tmp&=~((0xFFFF>>(16-(number)))<<(position));\
+                                                      tmp|=((tmpvalue&(0xFFFF>>(16-(number))))<<(position));\
+                                                      registre=tmp;\
+                                                      }
+/** Types Definitions
+ */
+
+/**  T_KPD_Nsoftware_mode : Keyboard Enable Software Mode Type
+ */
+typedef enum 
+  {
+    SOFTWARE_MODE_ENABLE = 0,
+    HARDWARE_DECODING    = 1
+  } T_KPD_Nsoftware_mode; 
+
+
+
+/**  T_KPD_PTV : Divisor factor
+ */
+typedef enum 
+  {
+    KPD_CLK_DIV2   = 0,
+    KPD_CLK_DIV4   = 1,
+    KPD_CLK_DIV8   = 2,
+    KPD_CLK_DIV16  = 3,
+    KPD_CLK_DIV32  = 4,
+    KPD_CLK_DIV64  = 5,
+    KPD_CLK_DIV128 = 6,
+    KPD_CLK_DIV256 = 7
+  } T_KPD_PTV;
+
+
+
+/**  T_KPD_EnableDetection : Keyboard Detection Enable Type
+ */
+typedef enum 
+  {
+    KPD_DETECTION_ENABLED  = 1,
+    KPD_DETECTION_DISABLED = 0
+  } T_KPD_EnableDetection;
+
+
+/**  T_KPD_Status : Keyboard State Machine Status Type
+ */
+typedef enum 
+  {
+    KPD_IDLE                  = 0x0,
+    KPD_SCANNING              = 0x1,
+    KPD_LOAD_TIMER_DEBOUNCING = 0x2,
+    KPD_TEST_TIMER_DEBOUNCING = 0x3,
+    KPD_GEN_IT_EVENT          = 0x4,
+    KPD_GEN_IT_KEY_AND_EVENT  = 0x5,
+    KPD_LOAD_TIMER_LONG_KEY   = 0x6,
+    KPD_TEST_TIMER_LONG_KEY   = 0x7,
+    KPD_GEN_IT_LONG_KEY       = 0x8,
+    KPD_LOAD_TIMER_TIME_OUT   = 0x9,
+    KPD_TEST_TIMER_TIME_OUT   = 0xA,
+    KPD_GEN_IT_TIME_OUT       = 0xB,
+    KPD_LOAD_TIMER_REPEAT_KEY = 0xC,
+    KPD_TEST_TIMER_REPEAT_KEY = 0xD,
+    KPD_OTHER                 = 0xF
+  } T_KPD_Status;
+
+
+#endif
+
+
+
+/** Define the number max of client that can subscribe to the keypad driver.
+ * This value must be lower or equal than 32.
+ */
+#define KPD_MAX_SUBSCRIBER (4)
+
+/** Define the number of available mode. This value must be greater or equal to 2
+ * because default and alphanumeric mode must always be defined.
+ * (This value define the size of kpd_vpm_table array).
+ */
+#define KPD_NB_MODE  (3)
+
+/** Define the configurable mode value. This value must be defined with the enumerated
+ * type T_KPD_MODE. If KPD_MODE_CONFIG is not defined, the configurable mode is not supported.
+ */
+#define KPD_MODE_CONFIG (KPD_GAME_MODE)
+
+/** Base value for memory bank size, can be increased for customer needs.
+ */
+#define KPD_MB_BASE_SIZE   (100)
+
+
+
+/**
+ * @var T_KPD_MODE
+ * Enumerated type that defines all the available modes.
+ * The mandatory default mode are KPD_DEFAULT_MODE and KPD_ALPHANUMERIC_MODE.
+ * Some others mode can be added by the customer (Update KPD_NB_MODE value).
+ * Values must be consecutive. KPD_DEFAULT_MODE and KPD_ALPHANUMERIC_MODE must always
+ * be respectively equal to 1 and 2.
+ */
+typedef enum   {  KPD_DEFAULT_MODE = 1,
+                  KPD_ALPHANUMERIC_MODE = 2,
+                  KPD_GAME_MODE = 3
+               } T_KPD_MODE;
+
+/**
+ * Definition of all the virtual key ID. All Id's must be distinct.
+ */
+/* KPD_KEY_NULL must always be defined */
+/* KPD_KEY_NULL is not a key that can be notified to a subscriber */
+#define KPD_KEY_NULL (0)
+
+#define KPD_KEY_0          (1)
+#define KPD_KEY_1          (2)
+#define KPD_KEY_2          (3)
+#define KPD_KEY_3          (4)
+#define KPD_KEY_4          (5)
+#define KPD_KEY_5          (6)
+#define KPD_KEY_6          (7)
+#define KPD_KEY_7          (8)
+#define KPD_KEY_8          (9)
+#define KPD_KEY_9          (10)
+#define KPD_KEY_UP         (11)
+#define KPD_KEY_DOWN       (12)
+#define KPD_KEY_SOFT_LEFT  (13)
+#define KPD_KEY_SOFT_RIGHT (14)
+#define KPD_KEY_CONNECT    (15)
+#define KPD_KEY_DISCONNECT (16)
+#define KPD_KEY_STAR       (17)
+#define KPD_KEY_DIESE      (18)
+
+#define KPD_KEY_VOL_UP     (19)
+#define KPD_KEY_VOL_DOWN   (20)
+#define KPD_KEY_LEFT       (21)
+#define KPD_KEY_RIGHT      (22)
+#define KPD_KEY_ENTER      (23)
+#define KPD_KEY_RECORD     (24)
+
+
+/* This virtual key is defined for Condat callback when Power key is pressed
+   until new interface is defined with Condat */
+#define KPD_PWR            (25)
+
+#define KPD_KEY_ABC        (30)
+#define KPD_KEY_DEF        (31)
+#define KPD_KEY_GHI        (32)
+#define KPD_KEY_JKL        (33)
+#define KPD_KEY_MNO        (34)
+#define KPD_KEY_PQR        (35)
+#define KPD_KEY_ST         (36)
+#define KPD_KEY_UV         (37)
+#define KPD_KEY_WX         (38)
+#define KPD_KEY_YZ         (39)
+
+
+#endif /* _KPD_CFG_H_ */