FreeCalypso > hg > tcs211-c139
diff chipsetsw/drivers/drv_app/uart/uartfax.h @ 0:509db1a7b7b8
initial import: leo2moko-r1
| author | Space Falcon <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Mon, 01 Jun 2015 03:24:05 +0000 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chipsetsw/drivers/drv_app/uart/uartfax.h Mon Jun 01 03:24:05 2015 +0000 @@ -0,0 +1,600 @@ +/******************************************************************************* + * + * UARTFAX.H + * + * This driver allows to control the UARTs of chipset 1.5 for fax and data + * It performs flow control: RTS/CTS, XON/XOFF. + * + * (C) Texas Instruments 1999 - 2003 + * + ******************************************************************************/ + +#ifndef __UARTFAX_H__ +#define __UARTFAX_H__ + +#ifndef _WINDOWS + #include "l1sw.cfg" + #include "chipset.cfg" +#endif + +#ifndef C_EXTERN + #if (OP_L1_STANDALONE == 1) + #define C_EXTERN extern + #else + #define C_EXTERN + #endif +#endif + +#include "faxdata.h" + +/* + * In UAF_Init, a constant is used to identify the UART. + */ + +typedef enum { + UAF_UART_0, /* IrDA */ + UAF_UART_1 /* Modem */ + #if (CHIPSET == 12) + , UAF_UART_2 /* Modem 2 */ + #endif +} T_fd_UartId; + +#if (CHIPSET == 12) + #define NUMBER_OF_FD_UART (3) +#else + #define NUMBER_OF_FD_UART (2) +#endif + +/******************************************************************************* + * + * UAF_Init + * + * Purpose : Initializes the UART hardware and installs interrupt handlers. + * The parameters are set to the default values: + * - 19200 baud, + * - 8 bits / character, + * - no parity, + * - 1 stop bit, + * - no flow control. + * All functionalities of the UART driver are disabled. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_INTERNAL_ERR : Internal problem. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_Init (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_Enable + * + * Purpose : The functionalities of the UART driver are disabled or enabled. + * In the deactivated state, all information about the communication + * parameters should be stored and recalled if the driver is again + * enabled. When the driver is enabled the RX and TX buffers are + * cleared. + * + * Arguments: In : uartNo: Used UART. + * : enable: 1: enable the driver + * 0: disable the driver + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_Enable (T_fd_UartId uartNo, + SYS_BOOL enable); + +/******************************************************************************* + * + * UAF_SetComPar + * + * Purpose : Sets up the communication parameters: baud rate, bits per + * character, number of stop bits, parity. + * + * Arguments: In : uartNo : Used UART. + * baudrate: Used baud rate. + * bpc : Used bits per character. + * sb : Used stop bits. + * parity : Used parity. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: The specified parameters don't fit to the + * capabilities of the UART or wrong UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_SetComPar (T_fd_UartId uartNo, + T_baudrate baudrate, + T_bitsPerCharacter bpc, + T_stopBits sb, + T_parity parity); + +/******************************************************************************* + * + * UAF_SetBuffer + * + * Purpose : Sets up the size of the circular buffers to be used in the UART + * driver. This function may be called only if the UART is disabled + * with UAF_Enable. + * + * Arguments: In : uartNo : Used UART. + * bufSize : Specifies the size of the circular buffer. + * rxThreshold: Amount of received bytes that leads to a call + * to suspended read-out function which is passed + * to the function UAF_ReadData. + * txThreshold: Amount of bytes in the TX buffer to call the + * suspended write-in function which is passed to + * the function UAF_WriteData + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: bufSize exceeds the maximal possible + * capabilities of the driver or the threshold + * values don't correspond to the bufSize or + * wrong UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware or the + * function has been called while the UART is + * enabled. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_SetBuffer (T_fd_UartId uartNo, + SYS_UWORD16 bufSize, + SYS_UWORD16 rxThreshold, + SYS_UWORD16 txThreshold); + +/******************************************************************************* + * + * UAF_SetFlowCtrl + * + * Purpose : Changes the flow control mode of the UART driver. + * If a flow control is activated, DTR is activated or XOFF is sent + * if the RX buffer is not able to store the received characters else + * DTR is deactivated or XON is sent. + * + * Arguments: In : uartNo: Used UART. + * fcMode: flow control mode (none, DTR/DSR, RTS/CTS, XON/XOFF). + * XON : ASCII code of the XON character. + * XOFF : ASCII code of the XOFF character. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: The flow control mode is not supported or wrong + * UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_SetFlowCtrl (T_fd_UartId uartNo, + T_flowCtrlMode fcMode, + SYS_UWORD8 XON, + SYS_UWORD8 XOFF); + +/******************************************************************************* + * + * UAF_SetEscape + * + * Purpose : To return to the command mode at the ACI while a data connection + * is established, an escape sequence has to be detected. + * To distinguish between user data and the escape sequence a + * defined guard period is necessary before and after this sequence. + * + * Arguments: In: uartNo : Used UART. + * escChar : ASCII character which could appear three times + * as an escape sequence. + * guardPeriod: Denotes the minimal duration of the rest before + * the first and after the last character of the + * escape sequence, and the maximal receiving + * duration of the whole escape string. This value + * is expressed in ms. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_SetEscape (T_fd_UartId uartNo, + SYS_UWORD8 escChar, + SYS_UWORD16 guardPeriod); + +/******************************************************************************* + * + * UAF_InpAvail + * + * Purpose : Returns the number of characters available in the RX buffer of the + * driver. If the driver is disabled the function returns 0. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : >= 0 : The returned value is the amount of data in the + * RX buffer. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_NOT_READY : The function is called while the callback of the + * readOutFunc function is activated and still not + * terminated. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_InpAvail (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_OutpAvail + * + * Purpose : Returns the number of free characters in TX buffer of the driver. + * If the driver is disabled the function returns 0. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : >= 0 : The returned value is the amount of data in the + * TX buffer. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_NOT_READY : The function is called while the callback of the + * writeInFunc function is activated and still not + * terminated. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_OutpAvail (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_EnterSleep + * + * Purpose : Checks if UART is ready to enter Deep Sleep. If ready, enables + * wake-up interrupt. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : 0 : Deep Sleep is not possible. + * >= 1 : Deep Sleep is possible. + * FD_NOT_SUPPORTED: Wrong UART number. + * + * Warning: Parameters are not verified. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_EnterSleep (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_WakeUp + * + * Purpose : Wakes up UART after Deep Sleep. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * + * Warning: Parameters are not verified. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_WakeUp (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_ReadData + * + * Purpose : To read the received characters out of the RX buffer the address + * of a function is passed. If characters are available, the driver + * calls this function and pass the address and the amount of + * readable characters. Because the RX buffer is circular, the + * callback function may be called with more than one address of + * buffer fragment. + * The readOutFunc function modifies the contents of the size array + * to return the driver the number of processed characters. Each + * array entry is decremented by the number of bytes read in the + * fragment. + * If the UAF_ReadData is called while the RX buffer is empty, it + * depends on the suspend parameter to suspend the call-back or to + * leave without any operation. In the case of suspension, the + * return value of UAF_ReadData is UAF_SUSPENDED. A delayed call-back + * will be performed if: + * - the RX buffer reachs the adjusted threshold (rxThreshold of + * UAF_SetBuffer), + * - the state of a V.24 input line has changed, + * - a break is detected, + * - an escape sequence is detected. + * If no suspension is necessary the function returns the number of + * processed bytes. + * + * Arguments: In : uartNo : Used UART. + * suspend : mode of suspension in case of RX buffer empty. + * readOutFunc: Callback function. + * cldFromIrq: The driver sets this parameter to 1 + * if the callback function is called + * from an interrupt service routine. + * reInstall : The call-back function sets this + * parameter to rm_reInstall if the + * driver must call again the callback + * function when the RX threshold level + * is reached. Else it will be set to + * rm_noInstall. Before to call the + * readOutFunc function this parameter + * is set to rm_notDefined. + * nsource : Informed the callback function about + * the number of fragments which are + * ready to copy from the circular RX + * buffer. + * source : Array which contains the addresses + * of the fragments. + * size : Array which contains the sizes of + * each fragments. + * state : The state parameter is the status + * of the V.24 lines and the break / + * escape detection. The state + * parameter is described in the + * specification of UAF_GetLineState. + * Out: none + * + * Returns : >= 0 : Succesful operation. Amount of processed bytes. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_SUSPENDED : The callback is suspended until the buffer or + * state condition changed. + * FD_NOT_READY : The function is called while the callback is + * activated and still not terminated. + * FD_INTERNAL_ERR : Internal problems with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_ReadData (T_fd_UartId uartNo, + T_suspendMode suspend, + void (readOutFunc (SYS_BOOL cldFromIrq, + T_reInstMode *reInstall, + SYS_UWORD8 nsource, + SYS_UWORD8 *source[], + SYS_UWORD16 size[], + SYS_UWORD32 state))); + +/******************************************************************************* + * + * UAF_WriteData + * + * Purpose : To write characters into the TX buffer the address of a function + * is passed. If free space is available in the buffer, the driver + * calls this function and passes the destination address and the + * amount of space. Because the TX buffer is circular, the callback + * function may be called with more than one address of buffer + * fragment. + * The writeInFunc function modifies the contents of the size array + * to return the driver the number of processed bytes. Each array + * entry is decremented by the number of bytes written in this + * fragment. + * If the UAF_WriteData function is called while the TX buffer is + * full, it depends on the suspend parameter to suspend the + * call-back or to leave this function without any operation. In the + * case of suspension the returned value of the UAF_WriteData is + * UAF_SUSPENDED. A delayed call-back will be performed if the TX + * buffer reaches the adjusted threshold (txThreshold of + * UAF_SetBuffer). If no suspension is necessary the function returns + * the number of processed bytes. + * + * Arguments: In : uartNo : Used UART. + * suspend : mode of suspension in case of TX buffer empty. + * writeInFunc: Callback function. + * cldFromIrq: The driver sets this parameter to 1 + * if the call-back function is called + * from an interrupt service routine. + * reInstall : The callback function sets this + * parameter to rm_reInstall if the + * driver must call again the callback + * function when the TX threshold level + * is reached. Else it will be set to + * rm_noInstall. Before to call the + * writeInFunc function this parameter + * is set to rm_notDefined. + * ndest : Informed the callback function about + * the number of fragments which are + * available in the TX buffer. + * dest : Array which contains the addresses + * of the fragments. + * size : Array which contains the sizes of + * each fragments. + * Out: none + * + * Returns : >= 0 : Succesful operation. Amount of processed bytes. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_SUSPENDED : The callback is suspended until the buffer + * condition changed. + * FD_NOT_READY : The function is called while the callback is + * activated and still not terminated. + * FD_INTERNAL_ERR : Internal problems with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_WriteData (T_fd_UartId uartNo, + T_suspendMode suspend, + void (writeInFunc (SYS_BOOL cldFromIrq, + T_reInstMode *reInstall, + SYS_UWORD8 ndest, + SYS_UWORD8 *dest[], + SYS_UWORD16 size[]))); + +/******************************************************************************* + * + * UAF_StopRec + * + * Purpose : If a flow control mode is set, this function tells the terminal + * equipment that no more data can be received. + * XON/XOFF: XOFF is sent. + * DTR/DSR : DTR is desactivated. + * RTS/CTS : RTS is deactivated. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_StopRec (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_StartRec + * + * Purpose : If a flow control mode is set, this function tells the terminal + * equipment that the receiver is again able to receive more data. + * If the buffer has already reached the high water mark the driver + * sends the signal only if the buffer drains to a low water mark. + * XON/XOFF: XON is sent. + * DTR/DSR : DTR is activated. + * RTS/CTS : RTS is activated. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_StartRec (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_GetLineState + * + * Purpose : Returns the state of the V.24 lines, the flow control state and + * the result of the break/escape detection process as a bit field. + * + * Arguments: In : uartNo: Used UART. + * Out: state : State of the V.24 lines, the flow control state and + * the result of the break/escape sequence detection + * process as a bit field. + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_NOT_READY : The function is called while the callback of + * the readOutFunc function is activated and still + * not terminated. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_GetLineState (T_fd_UartId uartNo, + SYS_UWORD32 *state); + +/******************************************************************************* + * + * UAF_SetLineState + * + * Purpose : Sets the states of the V.24 status lines according to the bit + * field of the parameter state. + * + * Arguments: In : uartNo: Used UART. + * state : Bit field. Only the signals which are marked with + * the 'set' access can be used to change the state of + * the signal. + * mask : Bit field with the same structure as state. Each bit + * in state corresponds to a bit in mask. Settabled + * bits marked by a 1 are manipulated by the driver. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_SetLineState (T_fd_UartId uartNo, + SYS_UWORD32 state, + SYS_UWORD32 mask); + +/******************************************************************************* + * + * UAF_InterruptHandler + * + * Purpose : Interrupt handler. + * + * Arguments: In : uart_id : origin of interrupt + * interrupt_status: source of interrupt + * Out: none + * + * Returns : none + * + ******************************************************************************/ + +C_EXTERN void UAF_InterruptHandler (T_fd_UartId uart_id, + SYS_UWORD8 interrupt_status); + +/******************************************************************************* + * + * UAF_CheckXEmpty + * + * Purpose : Checks the empty condition of the Transmitter. + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : FD_OK : Empty condition OK. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_NOT_READY : Empty condition not OK. + * FD_INTERNAL_ERR : Internal problem with the hardware. + * + ******************************************************************************/ + +C_EXTERN T_FDRET UAF_CheckXEmpty (T_fd_UartId uartNo); + +/******************************************************************************* + * + * UAF_DTRInterruptHandler + * + * Purpose : This function is only used on C-Sample. On this platform, the DTR + * signal is controlled with an I/O. A change of state of this signal + * is detected with an interrupt. This function is called when this + * interrupt occurs. + * + * Arguments: In : none + * Out: none + * + * Returns : none + * + ******************************************************************************/ + +void UAF_DTRInterruptHandler (void); + +/******************************************************************************* + * + * UAF_Exit + * + * Purpose : + * + * Arguments: In : uartNo: Used UART. + * Out: none + * + * Returns : FD_OK : Successful operation. + * FD_NOT_SUPPORTED: Wrong UART number. + * FD_INTERNAL_ERR : Internal problem. + * + ******************************************************************************/ + +T_FDRET UAF_Exit (T_fd_UartId uartNo); + +#undef C_EXTERN + +#endif /* __UARTFAX_H__ */