FreeCalypso > hg > tcs211-c139
view chipsetsw/layer1/include/l1_defty.h @ 29:132b3e230631
README written for tcs211-c139
| author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Sun, 01 Nov 2015 19:39:44 +0000 |
| parents | 509db1a7b7b8 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_DEFTY.H * * Filename l1_defty.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if(L1_DYN_DSP_DWNLD == 1) #include "l1_dyn_dwl_defty.h" #endif typedef struct { UWORD16 modulus; UWORD16 relative_position; } T_BCCHS_SCHEDULE; typedef struct { UWORD8 schedule_array_size; T_BCCHS_SCHEDULE schedule_array[10]; } T_BCCHS; typedef struct { BOOL status; UWORD16 radio_freq; UWORD32 fn_offset; UWORD32 time_alignmt; UWORD8 sb26_attempt; UWORD8 tsc; UWORD16 bcch_blks_req; UWORD8 timing_validity; UWORD8 search_mode; UWORD8 gprs_priority; UWORD8 sb26_offset; // Set to 1 when SB26 RX win is entirely in frame 25. #if (L1_12NEIGH ==1) UWORD32 fn_offset_mem; UWORD32 time_alignmt_mem; #endif } T_NCELL_SINGLE; typedef struct { UWORD8 active_neigh_id_norm; UWORD8 active_neigh_tc_norm; UWORD8 active_neigh_id_top; UWORD8 active_neigh_tc_top; UWORD8 current_list_size; T_NCELL_SINGLE list[6]; } T_BCCHN_LIST; typedef struct { UWORD8 active_fb_id; UWORD8 active_sbconf_id; UWORD8 active_sb_id; UWORD8 current_list_size; UWORD8 first_in_list; //point at oldest element in list. Used when parsing the list. #if (L1_EOTD==1) #if L1_EOTD_QBIT_ACC // Store serving fn_offset and time_alignmt, so that they can be tracked // independently. UWORD32 serv_fn_offset; UWORD32 serv_time_alignmt; #endif // Need to track any TOA updates in dedicated mode else // QB errors are introduced in the results... UWORD8 eotd_toa_phase; WORD32 eotd_toa_tracking; WORD32 eotd_cache_toa_tracking; UWORD8 eotd_meas_session; UWORD32 fn_sb_serv; // for methods 1 & 2 UWORD32 ta_sb_serv; // for methods 1 & 2 WORD32 teotdS; // for method 2 only UWORD32 fn_offset_serv; // for method 2 only #endif #if (L1_12NEIGH==1) T_NCELL_SINGLE list[NBR_NEIGHBOURS+1]; // 1 place (13th) for S.C in EOTD. #else T_NCELL_SINGLE list[6]; #endif } T_NSYNC_LIST; typedef struct { UWORD8 cbch_state; UWORD32 starting_fn; UWORD32 first_block[48]; UWORD8 cbch_num; UWORD8 schedule_length; UWORD8 next; WORD32 start_continuous_fn; } T_CBCH_HEAD_SCHEDULE; typedef struct { UWORD8 cbch_num; UWORD8 next; UWORD32 start_fn[6]; } T_CBCH_INFO_SCHEDULE; /*=========================================================================*/ /* Moved type definitions from Debis files. */ /*=========================================================================*/ #if (AMR == 1) // AMR ver 1.0 parameters typedef struct { BOOL noise_suppression_bit; BOOL initial_codec_mode_indicator; UWORD8 initial_codec_mode; UWORD8 active_codec_set; UWORD8 threshold[3]; UWORD8 hysteresis[3]; } T_AMR_CONFIGURATION; #endif typedef struct { UWORD8 A[7+1]; } T_ENCRYPTION_KEY; typedef struct { UWORD8 A[22+1]; } T_RADIO_FRAME; typedef struct { UWORD8 n32; UWORD8 n51; UWORD8 n26; } T_SHORT_FRAME_NUMBER; typedef struct { UWORD16 A[31+1]; } T_CHAN_LIST; typedef struct { UWORD16 num_of_chans; T_CHAN_LIST chan_number; } T_BCCH_LIST; typedef struct { UWORD16 rf_chan_num; UWORD8 l2_channel_type; UWORD8 error_cause; T_RADIO_FRAME l2_frame; UWORD8 bsic; UWORD8 tc; } T_PH_DATA_IND; typedef struct { UWORD16 A[63+1]; } T_MA_FIELD; typedef struct { UWORD16 rf_chan_cnt; T_MA_FIELD rf_chan_no; } T_MOBILE_ALLOCATION; typedef struct { BOOL start_time_present; T_SHORT_FRAME_NUMBER start_time; } T_STARTING_TIME; typedef struct { UWORD16 radio_freq_no; WORD8 rxlev; } T_RXLEV_MEAS; typedef struct { UWORD8 maio; UWORD8 hsn; } T_HOPPING_RF; typedef struct { UWORD16 radio_freq; } T_SINGLE_RF; typedef union { T_SINGLE_RF single_rf; T_HOPPING_RF hopping_rf; } T_CHN_SEL_CHOICE; typedef struct { BOOL h; T_CHN_SEL_CHOICE rf_channel; } T_CHN_SEL; typedef struct { T_CHN_SEL chan_sel; UWORD8 channel_type; UWORD8 subchannel; UWORD8 timeslot_no; UWORD8 tsc; } T_CHANNEL_DESCRIPTION; typedef struct { UWORD8 ncc; UWORD8 bcc; UWORD16 bcch_carrier; } T_CELL_DESC; typedef struct { T_CELL_DESC cell_description; T_CHANNEL_DESCRIPTION channel_desc_1; UWORD8 channel_mode_1; T_STARTING_TIME starting_time; UWORD8 ho_acc; UWORD8 txpwr; BOOL report_time_diff; T_MOBILE_ALLOCATION frequency_list; T_CHANNEL_DESCRIPTION channel_desc_2; UWORD8 channel_mode_2; T_MOBILE_ALLOCATION frequency_list_bef_sti; T_CHANNEL_DESCRIPTION channel_desc_1_bef_sti; T_CHANNEL_DESCRIPTION channel_desc_2_bef_sti; BOOL cipher_mode; UWORD8 a5_algorithm; } T_HO_PARAMS; typedef struct { T_CHANNEL_DESCRIPTION channel_desc; T_MOBILE_ALLOCATION frequency_list; T_STARTING_TIME starting_time; } T_MPHC_CHANGE_FREQUENCY; typedef struct { UWORD8 subchannel; UWORD8 channel_mode; #if (AMR == 1) T_AMR_CONFIGURATION amr_configuration; #endif } T_MPHC_CHANNEL_MODE_MODIFY_REQ; typedef struct { UWORD8 cipher_mode; UWORD8 a5_algorithm; T_ENCRYPTION_KEY new_ciph_param; } T_MPHC_SET_CIPHERING_REQ; typedef struct { UWORD8 sub_channel; UWORD8 frame_erasure; } T_OML1_CLOSE_TCH_LOOP_REQ; typedef struct { #if (defined _WINDOWS && (OP_RIV_AUDIO == 1)) T_RV_HDR header; #endif UWORD8 tested_device; } T_OML1_START_DAI_TEST_REQ; /***********************************************************/ /* Type definitions for DEBUG... */ /***********************************************************/ typedef struct // translate string in int and int in string { CHAR *message; WORD32 SignalCode; WORD32 size; } MSG_DEBUG; typedef struct // translate string in int and int in string { CHAR *name; } TASK_TRACE; /***********************************************************/ /* Type definitions for data structures used for MFTAB */ /* managment... */ /***********************************************************/ typedef struct { void (*fct_ptr)(UWORD8,UWORD8); CHAR param1; CHAR param2; } T_FCT; typedef struct { T_FCT fct[L1_MAX_FCT]; } T_FRM; typedef struct { T_FRM frmlst[MFTAB_SIZE]; } T_MFTAB; typedef struct { const T_FCT *address; UWORD8 size; } T_TASK_MFTAB; /***********************************************************/ /* TPU controle register components definition. */ /***********************************************************/ #if (CODE_VERSION==SIMULATION) typedef struct // contents of REG_CMD register { unsigned int tpu_reset_bit : 1; // TPU_RESET bit : ON (reset TPU) unsigned int tpu_pag_bit : 1; // TPU_PAG bit : 0 (page 0) unsigned int tpu_enb_bit : 1; // TPU_ENB bit : ON (TPU commun.int.) unsigned int dsp_pag_bit : 1; // DSP_PAG bit : 0 (page 0) unsigned int dsp_enb_bit : 1; // DSP_ENB bit : ON (DSP commun.int.) unsigned int tpu_stat_bit : 1; // TPU_STAT bit : ON (if TPU active) OFF (if TPU in IDLE) unsigned int tpu_idle_bit : 1; // TPU_IDLE bit : ON (force IDLE mode) } T_reg_cmd; // Rem: we must keep "unsigned int" type for bitmap. #else typedef struct // contents of REG_CMD register { unsigned int tpu_reset_bit : 1; // TPU_RESET bit : ON (reset TPU) unsigned int tpu_pag_bit : 1; // TPU_PAG bit : 0 (page 0) unsigned int tpu_enb_bit : 1; // TPU_ENB bit : ON (TPU commun.int.) unsigned int unused_1 : 1; // unsigned int dsp_enb_bit : 1; // DSP_ENB bit : ON (DSP commun.int.) unsigned int unused_2 : 1; // unsigned int unused_3 : 1; // unsigned int tsp_reset_bit : 1; // TSP_RESET bit : ON (reset TSP) unsigned int tpu_idle_bit : 1; // TPU_IDLE bit : ON (force IDLE mode) unsigned int tup_wait_bit : 1; // TPU_WAIT bit : ON (TPU ready) unsigned int tpu_ck_enb_bit: 1; // TPU_CLK bit : ON (TPU clock on) } T_reg_cmd; #endif /***********************************************************/ /* */ /* Data structure for global info components. */ /* */ /***********************************************************/ typedef struct { API d_task_d; // (0) Downlink task command. API d_burst_d; // (1) Downlink burst identifier. API d_task_u; // (2) Uplink task command. API d_burst_u; // (3) Uplink burst identifier. API d_task_md; // (4) Downlink Monitoring (FB/SB) command. #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) API d_background; // (5) Background tasks #else API d_reserved; // (5) Reserved #endif API d_debug; // (6) Debug/Acknowledge/general purpose word. API d_task_ra; // (7) RA task command. API d_fn; // (8) FN, in Rep. period and FN%104, used for TRAFFIC/TCH only. // bit [0..7] -> b_fn_report, FN in the normalized reporting period. // bit [8..15] -> b_fn_sid, FN % 104, used for SID positionning. API d_ctrl_tch; // (9) Tch channel description. // bit [0..3] -> b_chan_mode, channel mode. // bit [4..5] -> b_chan_type, channel type. // bit [6] -> reset SACCH // bit [7] -> vocoder ON // bit [8] -> b_sync_tch_ul, synchro. TCH/UL. // bit [9] -> b_sync_tch_dl, synchro. TCH/DL. // bit [10] -> b_stop_tch_ul, stop TCH/UL. // bit [11] -> b_stop_tch_dl, stop TCH/DL. // bit [12.13] -> b_tch_loop, tch loops A/B/C. API hole; // (10) unused hole. #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) API d_ctrl_abb; // (11) Bit field indicating the analog baseband register to send. // bit [0] -> b_ramp: the ramp information(a_ramp[]) is located in NDB // bit [1.2] -> unused // bit [3] -> b_apcdel: delays-register in NDB // bit [4] -> b_afc: freq control register in DB // bit [5..15] -> unused #endif API a_a5fn[2]; // (12..13) Encryption Frame number. // word 0, bit [0..4] -> T2. // word 0, bit [5..10] -> T3. // word 1, bit [0..11] -> T1. API d_power_ctl; // (14) Power level control. API d_afc; // (15) AFC value (enabled by "b_afc" in "d_ctrl_TCM4400 or in d_ctrl_abb"). API d_ctrl_system; // (16) Controle Register for RESET/RESUME. // bit [0..2] -> b_tsq, training sequence. // bit [3] -> b_bcch_freq_ind, BCCH frequency indication. // bit [15] -> b_task_abort, DSP task abort command. } T_DB_MCU_TO_DSP; typedef struct { API d_task_d; // (0) Downlink task command. API d_burst_d; // (1) Downlink burst identifier. API d_task_u; // (2) Uplink task command. API d_burst_u; // (3) Uplink burst identifier. API d_task_md; // (4) Downlink Monitoring (FB/SB) task command. #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) API d_background; // (5) Background tasks #else API d_reserved; // (5) Reserved #endif API d_debug; // (6) Debug/Acknowledge/general purpose word. API d_task_ra; // (7) RA task command. #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) API a_serv_demod[4]; // ( 8..11) Serv. cell demod. result, array of 4 words (D_TOA,D_PM,D_ANGLE,D_SNR). API a_pm[3]; // (12..14) Power measurement results, array of 3 words. API a_sch[5]; // (15..19) Header + SB information, array of 5 words. #else API a_pm[3]; // ( 8..10) Power measurement results, array of 3 words. API a_serv_demod[4]; // (11..14) Serv. cell demod. result, array of 4 words (D_TOA,D_PM,D_ANGLE,D_SNR). API a_sch[5]; // (15..19) Header + SB information, array of 5 words. #endif } T_DB_DSP_TO_MCU; #if (DSP == 34) || (DSP == 35) || (DSP == 36) // NDB GSM typedef struct { // MISC Tasks API d_dsp_page; // DSP status returned (DSP --> MCU). API d_error_status; // RIF control (MCU -> DSP). API d_spcx_rif; API d_tch_mode; // TCH mode register. // bit [0..1] -> b_dai_mode. // bit [2] -> b_dtx. API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega API d_dsp_test; // Words dedicated to Software version (DSP code + Patch) API d_version_number1; API d_version_number2; API d_debug_ptr; API d_debug_bk; API d_pll_config; // GSM/GPRS DSP Debug trace support API p_debug_buffer; API d_debug_buffer_size; API d_debug_trace_type; #if (W_A_DSP_IDLE3 == 1) // DSP report its state: 0 run, 1 Idle1, 2 Idle2, 3 Idle3. API d_dsp_state; // 5 words are reserved for any possible mapping modification API d_hole1_ndb[2]; #else // 6 words are reserved for any possible mapping modification API d_hole1_ndb[3]; #endif #if (AMR == 1) API p_debug_amr; #else API d_hole_debug_amr; #endif #if (CHIPSET == 12) #if (DSP == 35) || (DSP == 36) API d_hole2_ndb[1]; API d_mcsi_select; #else API d_hole2_ndb[2]; #endif #else API d_hole2_ndb[2]; #endif // New words APCDEL1 and APCDEL2 for 2TX: TX/PRACH combinations API d_apcdel1_bis; API d_apcdel2_bis; // New registers due to IOTA analog base band API d_apcdel2; API d_vbctrl2; API d_bulgcal; // Analog Based Band API d_afcctladd; API d_vbuctrl; API d_vbdctrl; API d_apcdel1; API d_apcoff; API d_bulioff; API d_bulqoff; API d_dai_onoff; API d_auxdac; #if (ANLG_FAM == 1) API d_vbctrl; #elif ((ANLG_FAM == 2) || (ANLG_FAM == 3)) API d_vbctrl1; #endif API d_bbctrl; // Monitoring tasks control (MCU <- DSP) // FB task API d_fb_det; // FB detection result. (1 for FOUND). API d_fb_mode; // Mode for FB detection algorithm. API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). // SB Task API a_sch26[5]; // Header + SB information, array of 5 words. API d_audio_gain_ul; API d_audio_gain_dl; // Controller of the melody E2 audio compressor API d_audio_compressor_ctrl; // AUDIO module API d_audio_init; API d_audio_status; // Audio tasks // TONES (MCU -> DSP) API d_toneskb_init; API d_toneskb_status; API d_k_x1_t0; API d_k_x1_t1; API d_k_x1_t2; API d_pe_rep; API d_pe_off; API d_se_off; API d_bu_off; API d_t0_on; API d_t0_off; API d_t1_on; API d_t1_off; API d_t2_on; API d_t2_off; API d_k_x1_kt0; API d_k_x1_kt1; API d_dur_kb; API d_shiftdl; API d_shiftul; API d_aec_ctrl; API d_es_level_api; API d_mu_api; // Melody Ringer module API d_melo_osc_used; API d_melo_osc_active; API a_melo_note0[4]; API a_melo_note1[4]; API a_melo_note2[4]; API a_melo_note3[4]; API a_melo_note4[4]; API a_melo_note5[4]; API a_melo_note6[4]; API a_melo_note7[4]; // selection of the melody format API d_melody_selection; // Holes due to the format melody E1 API a_melo_holes[3]; // Speech Recognition module API d_sr_status; // status of the DSP speech reco task API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. API d_sr_bit_exact_test; // bit exact test API d_sr_nb_words; // number of words used in the speech recognition task API d_sr_db_level; // estimate voice level in dB API d_sr_db_noise; // estimate noise in dB API d_sr_mod_size; // size of the model API a_n_best_words[4]; // array of the 4 best words API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) // Audio buffer API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. // V42bis module API d_v42b_nego0; API d_v42b_nego1; API d_v42b_control; API d_v42b_ratio_ind; API d_mcu_control; API d_mcu_control_sema; // Background tasks API d_background_enable; API d_background_abort; API d_background_state; API d_max_background; API a_background_tasks[16]; API a_back_task_io[16]; // GEA module defined in l1p_deft.h (the following section is overlaid with GPRS NDB memory) API d_gea_mode_ovly; API a_gea_kc_ovly[4]; #if (ANLG_FAM == 3) // SYREN specific registers API d_vbpop; API d_vau_delay_init; API d_vaud_cfg; API d_vauo_onoff; API d_vaus_vol; API d_vaud_pll; API d_hole3_ndb[1]; #elif ((ANLG_FAM == 1) || (ANLG_FAM == 2)) API d_hole3_ndb[7]; #endif // word used for the init of USF threshold API d_thr_usf_detect; // Encryption module API d_a5mode; // Encryption Mode. API d_sched_mode_gprs_ovly; // 7 words are reserved for any possible mapping modification API d_hole4_ndb[5]; // Ramp definition for Omega device API a_ramp[16]; // CCCH/SACCH downlink information...(!!) API a_cd[15]; // Header + CCCH/SACCH downlink information. // FACCH downlink information........(!!) API a_fd[15]; // Header + FACCH downlink information. // Traffic downlink data frames......(!!) API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. // CCCH/SACCH uplink information.....(!!) API a_cu[15]; // Header + CCCH/SACCH uplink information. // FACCH downlink information........(!!) API a_fu[15]; // Header + FACCH uplink information // Traffic downlink data frames......(!!) API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. // Random access.....................(MCU -> DSP). API d_rach; // RACH information. //...................................(MCU -> DSP). API a_kc[4]; // Encryption Key Code. // Integrated Data Services module API d_ra_conf; API d_ra_act; API d_ra_test; API d_ra_statu; API d_ra_statd; API d_fax; API a_data_buf_ul[21]; API a_data_buf_dl[37]; // GTT API mapping for DSP code 34 (for test only) #if (L1_GTT == 1) API d_tty_status; API d_tty_detect_thres; API d_ctm_detect_shift; API d_tty_fa_thres; API d_tty_mod_norm; API d_tty_reset_buffer_ul; API d_tty_loop_ctrl; API p_tty_loop_buffer; #else API a_tty_holes[8]; #endif API a_sr_holes0[414]; #if (L1_NEW_AEC) // new AEC API d_cont_filter; API d_granularity_att; API d_coef_smooth; API d_es_level_max; API d_fact_vad; API d_thrs_abs; API d_fact_asd_fil; API d_fact_asd_mut; API d_far_end_pow_h; API d_far_end_pow_l; API d_far_end_noise_h; API d_far_end_noise_l; #else API a_new_aec_holes[12]; #endif // L1_NEW_AEC // Speech recognition model API a_sr_holes1[145]; API d_cport_init; API d_cport_ctrl; API a_cport_cfr[2]; API d_cport_tcl_tadt; API d_cport_tdat; API d_cport_tvs; API d_cport_status; API d_cport_reg_value; API a_cport_holes[1011]; API a_model[1041]; // EOTD buffer #if (L1_EOTD==1) API d_eotd_first; API d_eotd_max; API d_eotd_nrj_high; API d_eotd_nrj_low; API a_eotd_crosscor[18]; #else API a_eotd_holes[22]; #endif // AMR ver 1.0 buffers API a_amr_config[4]; API a_ratscch_ul[6]; API a_ratscch_dl[6]; API d_amr_snr_est; // estimation of the SNR of the AMR speech block #if (L1_VOICE_MEMO_AMR) API d_amms_ul_voc; #else API a_voice_memo_amr_holes[1]; #endif API d_thr_onset_afs; // thresh detection ONSET AFS API d_thr_sid_first_afs; // thresh detection SID_FIRST AFS API d_thr_ratscch_afs; // thresh detection RATSCCH AFS API d_thr_update_afs; // thresh detection SID_UPDATE AFS API d_thr_onset_ahs; // thresh detection ONSET AHS API d_thr_sid_ahs; // thresh detection SID frames AHS API d_thr_ratscch_marker;// thresh detection RATSCCH MARKER API d_thr_sp_dgr; // thresh detection SPEECH DEGRADED/NO_DATA API d_thr_soft_bits; #if (MELODY_E2) API d_melody_e2_osc_stop; API d_melody_e2_osc_active; API d_melody_e2_semaphore; API a_melody_e2_osc[16][3]; API d_melody_e2_globaltimefactor; API a_melody_e2_instrument_ptr[8]; API d_melody_e2_deltatime; #if (AMR_THRESHOLDS_WORKAROUND) API a_d_macc_thr_afs[8]; API a_d_macc_thr_ahs[6]; #else API a_melody_e2_holes0[14]; #endif API a_melody_e2_holes1[693]; API a_dsp_trace[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_DSP_TRACE]; API a_melody_e2_instrument_wave[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_INSTRUMENT]; #else API d_holes[61]; #if (AMR_THRESHOLDS_WORKAROUND) API a_d_macc_thr_afs[8]; API a_d_macc_thr_ahs[6]; #endif #endif } T_NDB_MCU_DSP; #elif (DSP == 33) // NDB GSM typedef struct { // MISC Tasks API d_dsp_page; // DSP status returned (DSP --> MCU). API d_error_status; // RIF control (MCU -> DSP). API d_spcx_rif; API d_tch_mode; // TCH mode register. // bit [0..1] -> b_dai_mode. // bit [2] -> b_dtx. API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega API d_dsp_test; // Words dedicated to Software version (DSP code + Patch) API d_version_number1; API d_version_number2; API d_debug_ptr; API d_debug_bk; API d_pll_config; // GSM/GPRS DSP Debug trace support API p_debug_buffer; API d_debug_buffer_size; API d_debug_trace_type; #if (W_A_DSP_IDLE3 == 1) // DSP report its state: 0 run, 1 Idle1, 2 Idle2, 3 Idle3. API d_dsp_state; // 10 words are reserved for any possible mapping modification API d_hole1_ndb[5]; #else // 11 words are reserved for any possible mapping modification API d_hole1_ndb[6]; #endif // New words APCDEL1 and APCDEL2 for 2TX: TX/PRACH combinations API d_apcdel1_bis; API d_apcdel2_bis; // New registers due to IOTA analog base band API d_apcdel2; API d_vbctrl2; API d_bulgcal; // Analog Based Band API d_afcctladd; API d_vbuctrl; API d_vbdctrl; API d_apcdel1; API d_apcoff; API d_bulioff; API d_bulqoff; API d_dai_onoff; API d_auxdac; #if (ANLG_FAM == 1) API d_vbctrl; #elif ((ANLG_FAM == 2) || (ANLG_FAM == 3)) API d_vbctrl1; #endif API d_bbctrl; // Monitoring tasks control (MCU <- DSP) // FB task API d_fb_det; // FB detection result. (1 for FOUND). API d_fb_mode; // Mode for FB detection algorithm. API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). // SB Task API a_sch26[5]; // Header + SB information, array of 5 words. API d_audio_gain_ul; API d_audio_gain_dl; // Controller of the melody E2 audio compressor API d_audio_compressor_ctrl; // AUDIO module API d_audio_init; API d_audio_status; // Audio tasks // TONES (MCU -> DSP) API d_toneskb_init; API d_toneskb_status; API d_k_x1_t0; API d_k_x1_t1; API d_k_x1_t2; API d_pe_rep; API d_pe_off; API d_se_off; API d_bu_off; API d_t0_on; API d_t0_off; API d_t1_on; API d_t1_off; API d_t2_on; API d_t2_off; API d_k_x1_kt0; API d_k_x1_kt1; API d_dur_kb; API d_shiftdl; API d_shiftul; API d_aec_ctrl; API d_es_level_api; API d_mu_api; // Melody Ringer module API d_melo_osc_used; API d_melo_osc_active; API a_melo_note0[4]; API a_melo_note1[4]; API a_melo_note2[4]; API a_melo_note3[4]; API a_melo_note4[4]; API a_melo_note5[4]; API a_melo_note6[4]; API a_melo_note7[4]; // selection of the melody format API d_melody_selection; // Holes due to the format melody E1 API a_melo_holes[3]; // Speech Recognition module API d_sr_status; // status of the DSP speech reco task API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. API d_sr_bit_exact_test; // bit exact test API d_sr_nb_words; // number of words used in the speech recognition task API d_sr_db_level; // estimate voice level in dB API d_sr_db_noise; // estimate noise in dB API d_sr_mod_size; // size of the model API a_n_best_words[4]; // array of the 4 best words API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) // Audio buffer API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. // V42bis module API d_v42b_nego0; API d_v42b_nego1; API d_v42b_control; API d_v42b_ratio_ind; API d_mcu_control; API d_mcu_control_sema; // Background tasks API d_background_enable; API d_background_abort; API d_background_state; API d_max_background; API a_background_tasks[16]; API a_back_task_io[16]; // GEA module defined in l1p_deft.h (the following section is overlaid with GPRS NDB memory) API d_gea_mode_ovly; API a_gea_kc_ovly[4]; API d_hole3_ndb[8]; // Encryption module API d_a5mode; // Encryption Mode. API d_sched_mode_gprs_ovly; // 7 words are reserved for any possible mapping modification API d_hole4_ndb[5]; // Ramp definition for Omega device API a_ramp[16]; // CCCH/SACCH downlink information...(!!) API a_cd[15]; // Header + CCCH/SACCH downlink information. // FACCH downlink information........(!!) API a_fd[15]; // Header + FACCH downlink information. // Traffic downlink data frames......(!!) API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. // CCCH/SACCH uplink information.....(!!) API a_cu[15]; // Header + CCCH/SACCH uplink information. // FACCH downlink information........(!!) API a_fu[15]; // Header + FACCH uplink information // Traffic downlink data frames......(!!) API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. // Random access.....................(MCU -> DSP). API d_rach; // RACH information. //...................................(MCU -> DSP). API a_kc[4]; // Encryption Key Code. // Integrated Data Services module API d_ra_conf; API d_ra_act; API d_ra_test; API d_ra_statu; API d_ra_statd; API d_fax; API a_data_buf_ul[21]; API a_data_buf_dl[37]; #if (L1_NEW_AEC) // new AEC API a_new_aec_holes[422]; API d_cont_filter; API d_granularity_att; API d_coef_smooth; API d_es_level_max; API d_fact_vad; API d_thrs_abs; API d_fact_asd_fil; API d_fact_asd_mut; API d_far_end_pow_h; API d_far_end_pow_l; API d_far_end_noise_h; API d_far_end_noise_l; #endif // Speech recognition model #if (L1_NEW_AEC) API a_sr_holes[1165]; #else API a_sr_holes[1599]; #endif // L1_NEW_AEC API a_model[1041]; // EOTD buffer #if (L1_EOTD==1) API d_eotd_first; API d_eotd_max; API d_eotd_nrj_high; API d_eotd_nrj_low; API a_eotd_crosscor[18]; #else API a_eotd_holes[22]; #endif #if (MELODY_E2) API a_melody_e2_holes0[27]; API d_melody_e2_osc_used; API d_melody_e2_osc_active; API d_melody_e2_semaphore; API a_melody_e2_osc[16][3]; API d_melody_e2_globaltimefactor; API a_melody_e2_instrument_ptr[8]; API a_melody_e2_holes1[708]; API a_dsp_trace[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_DSP_TRACE]; API a_melody_e2_instrument_wave[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_INSTRUMENT]; #endif } T_NDB_MCU_DSP; #elif ((DSP == 32) || (DSP == 31)) typedef struct { // Monitoring tasks control..........(MCU <- DSP) API d_fb_det; // FB detection result. (1 for FOUND). API d_fb_mode; // Mode for FB detection algorithm. API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). // CCCH/SACCH downlink information...(!!) API a_cd[15]; // Header + CCCH/SACCH downlink information. // FACCH downlink information........(!!) API a_fd[15]; // Header + FACCH downlink information. // Traffic downlink data frames......(!!) API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. // CCCH/SACCH uplink information.....(!!) API a_cu[15]; // Header + CCCH/SACCH uplink information. #if (SPEECH_RECO) // FACCH downlink information........(!!) API a_fu[3]; // Header + FACCH uplink information // The size of this buffer is 15 word but some speech reco words // are overlayer with this buffer. This is the reason why the size is 3 instead of 15. API d_sr_status; // status of the DSP speech reco task API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. API sr_hole1; // hole API d_sr_bit_exact_test; // bit exact test API d_sr_nb_words; // number of words used in the speech recognition task API d_sr_db_level; // estimate voice level in dB API d_sr_db_noise; // estimate noise in dB API d_sr_mod_size; // size of the model API sr_holes_1[4]; // hole #else // FACCH downlink information........(!!) API a_fu[15]; // Header + FACCH uplink information #endif // Traffic uplink data frames........(!!) API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. // Random access.....................(MCU -> DSP). API d_rach; // RACH information. //...................................(MCU -> DSP). API d_a5mode; // Encryption Mode. API a_kc[4]; // Encryption Key Code. API d_tch_mode; // TCH mode register. // bit [0..1] -> b_dai_mode. // bit [2] -> b_dtx. // OMEGA...........................(MCU -> DSP). #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) API a_ramp[16]; #if (MELODY_E1) API d_melo_osc_used; API d_melo_osc_active; API a_melo_note0[4]; API a_melo_note1[4]; API a_melo_note2[4]; API a_melo_note3[4]; API a_melo_note4[4]; API a_melo_note5[4]; API a_melo_note6[4]; API a_melo_note7[4]; #if (DSP==31) // selection of the melody format API d_melody_selection; API holes[9]; #else // DSP==32 API d_dco_type; // Tide API p_start_IQ; API d_level_off; API d_dco_dbg; API d_tide_resa; API d_asynch_margin; // Perseus Asynch Audio Workaround API hole[4]; #endif // DSP 32 #else // NO MELODY E1 #if (DSP==31) // selection of the melody format API d_melody_selection; API holes[43]; // 43 unused holes. #else // DSP==32 API holes[34]; // 34 unused holes. API d_dco_type; // Tide API p_start_IQ; API d_level_off; API d_dco_dbg; API d_tide_resa; API d_asynch_margin; // Perseus Asynch Audio Workaround API hole[4]; #endif //DSP == 32 #endif // NO MELODY E1 API d_debug3; API d_debug2; API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega API d_afcctladd; API d_vbuctrl; API d_vbdctrl; API d_apcdel1; API d_aec_ctrl; API d_apcoff; API d_bulioff; API d_bulqoff; API d_dai_onoff; API d_auxdac; #if (ANLG_FAM == 1) API d_vbctrl; #elif (ANLG_FAM == 2) API d_vbctrl1; #endif API d_bbctrl; #else #error DSPCODE not supported with given ANALOG #endif //(ANALOG)1, 2 //...................................(MCU -> DSP). API a_sch26[5]; // Header + SB information, array of 5 words. // TONES.............................(MCU -> DSP) API d_toneskb_init; API d_toneskb_status; API d_k_x1_t0; API d_k_x1_t1; API d_k_x1_t2; API d_pe_rep; API d_pe_off; API d_se_off; API d_bu_off; API d_t0_on; API d_t0_off; API d_t1_on; API d_t1_off; API d_t2_on; API d_t2_off; API d_k_x1_kt0; API d_k_x1_kt1; API d_dur_kb; // PLL...............................(MCU -> DSP). API d_pll_clkmod1; API d_pll_clkmod2; // DSP status returned..........(DSP --> MCU). API d_error_status; // RIF control.......................(MCU -> DSP). API d_spcx_rif; API d_shiftdl; API d_shiftul; API p_saec_prog; API p_aec_prog; API p_spenh_prog; API a_ovly[75]; API d_ra_conf; API d_ra_act; API d_ra_test; API d_ra_statu; API d_ra_statd; API d_fax; #if (SPEECH_RECO) API a_data_buf_ul[3]; API a_n_best_words[4]; // array of the 4 best words API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) API sr_holes_2[6]; API a_data_buf_dl[37]; API a_hole[24]; API d_sched_mode_gprs_ovly; API fir_holes1[384]; API a_fir31_uplink[31]; API a_fir31_downlink[31]; API d_audio_init; API d_audio_status; API a_model[1041]; // array of the speech reco model #else API a_data_buf_ul[21]; API a_data_buf_dl[37]; API a_hole[24]; API d_sched_mode_gprs_ovly; API fir_holes1[384]; API a_fir31_uplink[31]; API a_fir31_downlink[31]; API d_audio_init; API d_audio_status; #if (L1_EOTD ==1) API a_eotd_hole[369]; API d_eotd_first; API d_eotd_max; API d_eotd_nrj_high; API d_eotd_nrj_low; API a_eotd_crosscor[18]; #endif #endif } T_NDB_MCU_DSP; #else // OTHER DSP CODE like 17 typedef struct { // Monitoring tasks control..........(MCU <- DSP) API d_fb_det; // FB detection result. (1 for FOUND). API d_fb_mode; // Mode for FB detection algorithm. API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). // CCCH/SACCH downlink information...(!!) API a_cd[15]; // Header + CCCH/SACCH downlink information. // FACCH downlink information........(!!) API a_fd[15]; // Header + FACCH downlink information. // Traffic downlink data frames......(!!) #if (DATA14_4 == 0) API a_dd_0[20]; // Header + DATA traffic downlink information, sub. chan. 0. API a_dd_1[20]; // Header + DATA traffic downlink information, sub. chan. 1. #endif #if (DATA14_4 == 1) API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. #endif // CCCH/SACCH uplink information.....(!!) API a_cu[15]; // Header + CCCH/SACCH uplink information. #if (SPEECH_RECO) // FACCH downlink information........(!!) API a_fu[3]; // Header + FACCH uplink information // The size of this buffer is 15 word but some speech reco words // are overlayer with this buffer. This is the reason why the size is 3 instead of 15. API d_sr_status; // status of the DSP speech reco task API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. API sr_hole1; // hole API d_sr_bit_exact_test; // bit exact test API d_sr_nb_words; // number of words used in the speech recognition task API d_sr_db_level; // estimate voice level in dB API d_sr_db_noise; // estimate noise in dB API d_sr_mod_size; // size of the model API sr_holes_1[4]; // hole #else // FACCH downlink information........(!!) API a_fu[15]; // Header + FACCH uplink information #endif // Traffic uplink data frames........(!!) #if (DATA14_4 == 0) API a_du_0[20]; // Header + DATA traffic uplink information, sub. chan. 0. API a_du_1[20]; // Header + DATA traffic uplink information, sub. chan. 1. #endif #if (DATA14_4 == 1) API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. #endif // Random access.....................(MCU -> DSP). API d_rach; // RACH information. //...................................(MCU -> DSP). API d_a5mode; // Encryption Mode. API a_kc[4]; // Encryption Key Code. API d_tch_mode; // TCH mode register. // bit [0..1] -> b_dai_mode. // bit [2] -> b_dtx. // OMEGA...........................(MCU -> DSP). #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) API a_ramp[16]; #if (MELODY_E1) API d_melo_osc_used; API d_melo_osc_active; API a_melo_note0[4]; API a_melo_note1[4]; API a_melo_note2[4]; API a_melo_note3[4]; API a_melo_note4[4]; API a_melo_note5[4]; API a_melo_note6[4]; API a_melo_note7[4]; #if (DSP == 17) // selection of the melody format API d_dco_type; // Tide API p_start_IQ; API d_level_off; API d_dco_dbg; API d_tide_resa; API d_asynch_margin; // Perseus Asynch Audio Workaround API hole[4]; #else API d_melody_selection; API holes[9]; #endif #else // NO MELODY E1 // selection of the melody format #if (DSP == 17) API holes[34]; // 34 unused holes. API d_dco_type; // Tide API p_start_IQ; API d_level_off; API d_dco_dbg; API d_tide_resa; API d_asynch_margin; // Perseus Asynch Audio Workaround API hole[4] #else // selection of the melody format API d_melody_selection; API holes[43]; // 43 unused holes. #endif #endif API d_debug3; API d_debug2; API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega API d_afcctladd; API d_vbuctrl; API d_vbdctrl; API d_apcdel1; API d_aec_ctrl; API d_apcoff; API d_bulioff; API d_bulqoff; API d_dai_onoff; API d_auxdac; #if (ANLG_FAM == 1) API d_vbctrl; #elif (ANLG_FAM == 2) API d_vbctrl1; #endif API d_bbctrl; #else #error DSPCODE not supported with given ANALOG #endif //(ANALOG)1, 2 //...................................(MCU -> DSP). API a_sch26[5]; // Header + SB information, array of 5 words. // TONES.............................(MCU -> DSP) API d_toneskb_init; API d_toneskb_status; API d_k_x1_t0; API d_k_x1_t1; API d_k_x1_t2; API d_pe_rep; API d_pe_off; API d_se_off; API d_bu_off; API d_t0_on; API d_t0_off; API d_t1_on; API d_t1_off; API d_t2_on; API d_t2_off; API d_k_x1_kt0; API d_k_x1_kt1; API d_dur_kb; // PLL...............................(MCU -> DSP). API d_pll_clkmod1; API d_pll_clkmod2; // DSP status returned..........(DSP --> MCU). API d_error_status; // RIF control.......................(MCU -> DSP). API d_spcx_rif; API d_shiftdl; API d_shiftul; #if (AEC == 1) // AEC control.......................(MCU -> DSP). #if (VOC == FR_EFR) API p_aec_init; API p_aec_prog; API p_spenh_init; API p_spenh_prog; #endif #if (VOC == FR_HR_EFR) API p_saec_prog; API p_aec_prog; API p_spenh_prog; #endif #endif API a_ovly[75]; API d_ra_conf; API d_ra_act; API d_ra_test; API d_ra_statu; API d_ra_statd; API d_fax; #if (SPEECH_RECO) API a_data_buf_ul[3]; API a_n_best_words[4]; // array of the 4 best words API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) API sr_holes_2[6]; API a_data_buf_dl[37]; API fir_holes1[409]; API a_fir31_uplink[31]; API a_fir31_downlink[31]; API d_audio_init; API d_audio_status; API a_model[1041]; // array of the speech reco model #else API a_data_buf_ul[21]; API a_data_buf_dl[37]; API fir_holes1[409]; API a_fir31_uplink[31]; API a_fir31_downlink[31]; API d_audio_init; API d_audio_status; #endif } T_NDB_MCU_DSP; #endif #if (DSP == 34) || (DSP == 35) || (DSP == 36) typedef struct { API_SIGNED d_transfer_rate; // Common GSM/GPRS // These words specified the latencies to applies on some peripherics API_SIGNED d_lat_mcu_bridge; API_SIGNED d_lat_mcu_hom2sam; API_SIGNED d_lat_mcu_bef_fast_access; API_SIGNED d_lat_dsp_after_sam; // DSP Start address API_SIGNED d_gprs_install_address; API_SIGNED d_misc_config; API_SIGNED d_cn_sw_workaround; API_SIGNED d_hole2_param[4]; //...................................Frequency Burst. API_SIGNED d_fb_margin_beg; API_SIGNED d_fb_margin_end; API_SIGNED d_nsubb_idle; API_SIGNED d_nsubb_dedic; API_SIGNED d_fb_thr_det_iacq; API_SIGNED d_fb_thr_det_track; //...................................Demodulation. API_SIGNED d_dc_off_thres; API_SIGNED d_dummy_thres; API_SIGNED d_dem_pond_gewl; API_SIGNED d_dem_pond_red; //...................................TCH Full Speech. API_SIGNED d_maccthresh1; API_SIGNED d_mldt; API_SIGNED d_maccthresh; API_SIGNED d_gu; API_SIGNED d_go; API_SIGNED d_attmax; API_SIGNED d_sm; API_SIGNED d_b; // V42Bis module API_SIGNED d_v42b_switch_hyst; API_SIGNED d_v42b_switch_min; API_SIGNED d_v42b_switch_max; API_SIGNED d_v42b_reset_delay; //...................................TCH Half Speech. API_SIGNED d_ldT_hr; API_SIGNED d_maccthresh_hr; API_SIGNED d_maccthresh1_hr; API_SIGNED d_gu_hr; API_SIGNED d_go_hr; API_SIGNED d_b_hr; API_SIGNED d_sm_hr; API_SIGNED d_attmax_hr; //...................................TCH Enhanced FR Speech. API_SIGNED c_mldt_efr; API_SIGNED c_maccthresh_efr; API_SIGNED c_maccthresh1_efr; API_SIGNED c_gu_efr; API_SIGNED c_go_efr; API_SIGNED c_b_efr; API_SIGNED c_sm_efr; API_SIGNED c_attmax_efr; //...................................CHED API_SIGNED d_sd_min_thr_tchfs; API_SIGNED d_ma_min_thr_tchfs; API_SIGNED d_md_max_thr_tchfs; API_SIGNED d_md1_max_thr_tchfs; API_SIGNED d_sd_min_thr_tchhs; API_SIGNED d_ma_min_thr_tchhs; API_SIGNED d_sd_av_thr_tchhs; API_SIGNED d_md_max_thr_tchhs; API_SIGNED d_md1_max_thr_tchhs; API_SIGNED d_sd_min_thr_tchefs; API_SIGNED d_ma_min_thr_tchefs; API_SIGNED d_md_max_thr_tchefs; API_SIGNED d_md1_max_thr_tchefs; API_SIGNED d_wed_fil_ini; API_SIGNED d_wed_fil_tc; API_SIGNED d_x_min; API_SIGNED d_x_max; API_SIGNED d_slope; API_SIGNED d_y_min; API_SIGNED d_y_max; API_SIGNED d_wed_diff_threshold; API_SIGNED d_mabfi_min_thr_tchhs; // FACCH module API_SIGNED d_facch_thr; // IDS module API_SIGNED d_max_ovsp_ul; API_SIGNED d_sync_thres; API_SIGNED d_idle_thres; API_SIGNED d_m1_thres; API_SIGNED d_max_ovsp_dl; API_SIGNED d_gsm_bgd_mgt; // FIR coefficients API a_fir_holes[4]; API a_fir31_uplink[31]; API a_fir31_downlink[31]; } T_PARAM_MCU_DSP; #elif (DSP == 33) typedef struct { API_SIGNED d_transfer_rate; // Common GSM/GPRS // These words specified the latencies to applies on some peripherics API_SIGNED d_lat_mcu_bridge; API_SIGNED d_lat_mcu_hom2sam; API_SIGNED d_lat_mcu_bef_fast_access; API_SIGNED d_lat_dsp_after_sam; // DSP Start address API_SIGNED d_gprs_install_address; API_SIGNED d_misc_config; API_SIGNED d_cn_sw_workaround; #if DCO_ALGO API_SIGNED d_cn_dco_param; API_SIGNED d_hole2_param[3]; #else API_SIGNED d_hole2_param[4]; #endif //...................................Frequency Burst. API_SIGNED d_fb_margin_beg; API_SIGNED d_fb_margin_end; API_SIGNED d_nsubb_idle; API_SIGNED d_nsubb_dedic; API_SIGNED d_fb_thr_det_iacq; API_SIGNED d_fb_thr_det_track; //...................................Demodulation. API_SIGNED d_dc_off_thres; API_SIGNED d_dummy_thres; API_SIGNED d_dem_pond_gewl; API_SIGNED d_dem_pond_red; //...................................TCH Full Speech. API_SIGNED d_maccthresh1; API_SIGNED d_mldt; API_SIGNED d_maccthresh; API_SIGNED d_gu; API_SIGNED d_go; API_SIGNED d_attmax; API_SIGNED d_sm; API_SIGNED d_b; // V42Bis module API_SIGNED d_v42b_switch_hyst; API_SIGNED d_v42b_switch_min; API_SIGNED d_v42b_switch_max; API_SIGNED d_v42b_reset_delay; //...................................TCH Half Speech. API_SIGNED d_ldT_hr; API_SIGNED d_maccthresh_hr; API_SIGNED d_maccthresh1_hr; API_SIGNED d_gu_hr; API_SIGNED d_go_hr; API_SIGNED d_b_hr; API_SIGNED d_sm_hr; API_SIGNED d_attmax_hr; //...................................TCH Enhanced FR Speech. API_SIGNED c_mldt_efr; API_SIGNED c_maccthresh_efr; API_SIGNED c_maccthresh1_efr; API_SIGNED c_gu_efr; API_SIGNED c_go_efr; API_SIGNED c_b_efr; API_SIGNED c_sm_efr; API_SIGNED c_attmax_efr; //...................................CHED API_SIGNED d_sd_min_thr_tchfs; API_SIGNED d_ma_min_thr_tchfs; API_SIGNED d_md_max_thr_tchfs; API_SIGNED d_md1_max_thr_tchfs; API_SIGNED d_sd_min_thr_tchhs; API_SIGNED d_ma_min_thr_tchhs; API_SIGNED d_sd_av_thr_tchhs; API_SIGNED d_md_max_thr_tchhs; API_SIGNED d_md1_max_thr_tchhs; API_SIGNED d_sd_min_thr_tchefs; API_SIGNED d_ma_min_thr_tchefs; API_SIGNED d_md_max_thr_tchefs; API_SIGNED d_md1_max_thr_tchefs; API_SIGNED d_wed_fil_ini; API_SIGNED d_wed_fil_tc; API_SIGNED d_x_min; API_SIGNED d_x_max; API_SIGNED d_slope; API_SIGNED d_y_min; API_SIGNED d_y_max; API_SIGNED d_wed_diff_threshold; API_SIGNED d_mabfi_min_thr_tchhs; // FACCH module API_SIGNED d_facch_thr; // IDS module API_SIGNED d_max_ovsp_ul; API_SIGNED d_sync_thres; API_SIGNED d_idle_thres; API_SIGNED d_m1_thres; API_SIGNED d_max_ovsp_dl; API_SIGNED d_gsm_bgd_mgt; // FIR coefficients API a_fir_holes[4]; API a_fir31_uplink[31]; API a_fir31_downlink[31]; } T_PARAM_MCU_DSP; #else typedef struct { //...................................Frequency Burst. API_SIGNED d_nsubb_idle; API_SIGNED d_nsubb_dedic; API_SIGNED d_fb_thr_det_iacq; API_SIGNED d_fb_thr_det_track; //...................................Demodulation. API_SIGNED d_dc_off_thres; API_SIGNED d_dummy_thres; API_SIGNED d_dem_pond_gewl; API_SIGNED d_dem_pond_red; API_SIGNED hole[1]; API_SIGNED d_transfer_rate; //...................................TCH Full Speech. API_SIGNED d_maccthresh1; API_SIGNED d_mldt; API_SIGNED d_maccthresh; API_SIGNED d_gu; API_SIGNED d_go; API_SIGNED d_attmax; API_SIGNED d_sm; API_SIGNED d_b; #if (VOC == FR_HR) || (VOC == FR_HR_EFR) //...................................TCH Half Speech. API_SIGNED d_ldT_hr; API_SIGNED d_maccthresh_hr; API_SIGNED d_maccthresh1_hr; API_SIGNED d_gu_hr; API_SIGNED d_go_hr; API_SIGNED d_b_hr; API_SIGNED d_sm_hr; API_SIGNED d_attmax_hr; #endif #if (VOC == FR_EFR) || (VOC == FR_HR_EFR) //...................................TCH Enhanced FR Speech. API_SIGNED c_mldt_efr; API_SIGNED c_maccthresh_efr; API_SIGNED c_maccthresh1_efr; API_SIGNED c_gu_efr; API_SIGNED c_go_efr; API_SIGNED c_b_efr; API_SIGNED c_sm_efr; API_SIGNED c_attmax_efr; #endif //...................................TCH Full Speech. API_SIGNED d_sd_min_thr_tchfs; API_SIGNED d_ma_min_thr_tchfs; API_SIGNED d_md_max_thr_tchfs; API_SIGNED d_md1_max_thr_tchfs; #if (VOC == FR) || (VOC == FR_HR) || (VOC == FR_HR_EFR) //...................................TCH Half Speech. API_SIGNED d_sd_min_thr_tchhs; API_SIGNED d_ma_min_thr_tchhs; API_SIGNED d_sd_av_thr_tchhs; API_SIGNED d_md_max_thr_tchhs; API_SIGNED d_md1_max_thr_tchhs; #endif #if (VOC == FR_EFR) || (VOC == FR_HR_EFR) //...................................TCH Enhanced FR Speech. API_SIGNED d_sd_min_thr_tchefs; //(24L *C_POND_RED) API_SIGNED d_ma_min_thr_tchefs; //(1200L *C_POND_RED) API_SIGNED d_md_max_thr_tchefs; //(2000L *C_POND_RED) API_SIGNED d_md1_max_thr_tchefs; //(160L *C_POND_RED) API_SIGNED d_hole1; #endif API_SIGNED d_wed_fil_ini; API_SIGNED d_wed_fil_tc; API_SIGNED d_x_min; API_SIGNED d_x_max; API_SIGNED d_slope; API_SIGNED d_y_min; API_SIGNED d_y_max; API_SIGNED d_wed_diff_threshold; API_SIGNED d_mabfi_min_thr_tchhs; API_SIGNED d_facch_thr; API_SIGNED d_dsp_test; #if (DATA14_4 == 0 ) || (VOC == FR_HR_EFR) API_SIGNED d_patch_addr1; API_SIGNED d_patch_data1; API_SIGNED d_patch_addr2; API_SIGNED d_patch_data2; API_SIGNED d_patch_addr3; API_SIGNED d_patch_data3; API_SIGNED d_patch_addr4; API_SIGNED d_patch_data4; #endif //................................... API_SIGNED d_version_number; // DSP patch version API_SIGNED d_ti_version; // customer number. No more used since 1.5 API_SIGNED d_dsp_page; #if IDS API_SIGNED d_max_ovsp_ul; API_SIGNED d_sync_thres; API_SIGNED d_idle_thres; API_SIGNED d_m1_thres; API_SIGNED d_max_ovsp_dl; #endif } T_PARAM_MCU_DSP; #endif #if (DSP_DEBUG_TRACE_ENABLE == 1) typedef struct { API d_debug_ptr_begin; API d_debug_ptr_end; } T_DB2_DSP_TO_MCU; #endif /*************************************************************/ /* Time informations... */ /*************************************************************/ /* */ /*************************************************************/ typedef struct { UWORD32 fn; // FN count UWORD16 t1; // FN div (26*51), (0..2047). UWORD8 t2; // FN modulo 26. UWORD8 t3; // FN modulo 51. UWORD8 tc; // Scell: TC UWORD8 fn_in_report; // FN modulo 102 or 104. UWORD16 fn_mod42432; // FN modulo 42432. UWORD8 fn_mod13; // FN modulo 13. #if L1_GPRS UWORD8 fn_mod52; // FN modulo 52. UWORD8 fn_mod104; // FN modulo 104. UWORD8 fn_mod13_mod4; // FN modulo 13 modulo 4. UWORD32 block_id; // Block ID #endif } T_TIME_INFO; /*************************************************************/ /* Idle mode tasks information... */ /*************************************************************/ /* must be filled according to Idle parameters... */ /* ... */ /*************************************************************/ typedef struct { UWORD8 pg_position; // Paging block starting frame. UWORD8 extpg_position; // Extended Paging block starting frame. } T_IDLE_TASK_INFO; /*************************************************************/ /* SDCCH information structure. */ /*************************************************************/ /* */ /* */ /*************************************************************/ typedef struct { UWORD8 dl_sdcch_position; UWORD8 dl_sacch_position; UWORD8 ul_sdcch_position; UWORD8 ul_sacch_position; UWORD8 mon_area_position; } T_SDCCH_DESC; /*************************************************************/ /* Random Access Task information structure. */ /*************************************************************/ /* */ /* */ /*************************************************************/ typedef struct { WORD32 rand; // 16 bit signed !! UWORD8 channel_request; UWORD8 ra_to_ctrl; UWORD8 ra_num; } T_RA_TASK_INFO; /***************************************************************************************/ /* Measurement info element for last input level table */ /***************************************************************************************/ typedef struct { UWORD8 lna_off; // 1 if lna switch is off. UWORD8 input_level; // last measured input level in dbm. } T_INPUT_LEVEL; /***************************************************************************************/ /* Measurement info element for Neighbor cell lists. */ /***************************************************************************************/ typedef struct { UWORD16 radio_freq; // carrier id. WORD32 acc; // Accumulation of measurements already performed. UWORD8 nbr_meas; } T_MEAS_INFO; typedef struct { UWORD16 bcch_freq; WORD16 rxlev_acc; UWORD8 rxlev_nbr_meas; } T5_CELL_MEAS; typedef struct { T5_CELL_MEAS A[33]; } T5_NCELL_MEAS; /***************************************************************************************/ /* Measurement info element serving cell in dedicated mode */ /***************************************************************************************/ typedef struct { WORD32 acc_sub; // Subset: accu. rxlev meas. UWORD32 nbr_meas_sub; // Subset: nbr meas. of rxlev. UWORD32 qual_acc_full; // Fullset: accu. rxqual meas. UWORD32 qual_acc_sub; // Subset: accu. rxqual meas. UWORD32 qual_nbr_meas_full; // Fullset: nbr meas. of rxqual. UWORD32 qual_nbr_meas_sub; // Subset: nbr meas. of rxqual. UWORD8 dtx_used; // Set when DTX as been used in current reporting period. } T_SMEAS; /***************************************************************************************/ /* */ /***************************************************************************************/ typedef struct { UWORD8 new_status; UWORD8 current_status; WORD32 time_to_exec; } T_TASK_STATUS; /***************************************************************************************/ /* Cell/Carrier info: identity, RX level measurement, time info, gain controle info. */ /***************************************************************************************/ typedef struct { // Carrier/Cell Identity. UWORD16 radio_freq; // carrier id. WORD32 bsic; // BSIC. // Time difference information. UWORD32 fn_offset; // offset between fn of this NCELL and the SCELL fn. UWORD32 time_alignmt; // time alignment. // Receive Level Measurement info. structure. T_MEAS_INFO meas; T_INPUT_LEVEL traffic_meas; T_INPUT_LEVEL traffic_meas_beacon; // Beacon frequency FIFO UWORD8 buff_beacon[4]; #if L1_GPRS // Receive Level measurements in packet transfer mode // Daughter frequencies info. T_INPUT_LEVEL transfer_meas; // Power reduction on serving cell PCCCH / PBCCH UWORD8 pb; #endif // Number of unsuccessfull attempt on SB reading. UWORD8 attempt_count; // System information bitmap. UWORD32 si_bit_map; // System info. bitmap used for BCCH reading. } T_CELL_INFO; typedef struct { UWORD16 A[32+1]; } TC_CHAN_LIST; typedef struct { UWORD8 num_of_chans; TC_CHAN_LIST chan_list; BOOL pwrc; BOOL dtx_allowed; UWORD8 ba_id; } T_NEW_BA_LIST; typedef struct { UWORD8 ba_id; // BA list identifier. UWORD32 nbr_carrier; // number of carriers in the BA list. UWORD8 np_ctrl; // Tels the meas_manager which PCH burst has been controled. UWORD8 first_index; // First BA index measured in current session. UWORD8 next_to_ctrl; // Carrier for next power measurement result. UWORD8 next_to_read; // Measurement session time spent. UWORD8 ms_ctrl; UWORD8 ms_ctrl_d; UWORD8 ms_ctrl_dd; UWORD8 used_il [2]; UWORD8 used_il_d [2]; UWORD8 used_il_dd[2]; UWORD8 used_lna [2]; UWORD8 used_lna_d [2]; UWORD8 used_lna_dd[2]; T_MEAS_INFO A[32+1]; // list of 32 neighbors + 1 serving. BOOL new_list_present; T_NEW_BA_LIST new_list; } T_BA_LIST; typedef struct { UWORD16 radio_freq; WORD16 accum_power_result; } T_POWER_ARRAY; typedef struct { UWORD16 power_array_size; T_POWER_ARRAY power_array[NBMAX_CARRIER]; } T_FULL_LIST_MEAS; typedef struct { UWORD32 nbr_sat_carrier_ctrl; // Nb of saturated carriers after a pm session in ctrl. UWORD32 nbr_sat_carrier_read; // Nb of saturated carriers after a pm session in read. UWORD8 meas_1st_pass_ctrl; // flag for 1st pass during a pm session in ctrl. UWORD8 meas_1st_pass_read; // flag for 1st pass during a pm session in read. UWORD32 next_to_ctrl; // Carrier for next power measurement result. UWORD32 next_to_read; // Measurement session time spent. UWORD8 ms_ctrl; UWORD8 ms_ctrl_d; UWORD8 ms_ctrl_dd; UWORD8 sat_flag[NBMAX_CARRIER]; // last measure was saturated, so not valid } T_FULL_LIST; /*************************************************************/ /* Dedicated channel information structure... */ /*************************************************************/ /* */ /*************************************************************/ typedef struct { T_CHANNEL_DESCRIPTION *desc_ptr; // Ptr to the Active channel description T_CHANNEL_DESCRIPTION desc; // Channel description for AFTER STI. T_CHANNEL_DESCRIPTION desc_bef_sti; // Channel description for BEFORE STI. UWORD8 mode; // Channel mode. UWORD8 tch_loop; // TCH loop mode. } T_CHANNEL_INFO; /*************************************************************/ /* Mobile allocation information structure... */ /*************************************************************/ /* */ /*************************************************************/ typedef struct { T_MOBILE_ALLOCATION *alist_ptr; // Ptr to the Active frequency list T_MOBILE_ALLOCATION freq_list; T_MOBILE_ALLOCATION freq_list_bef_sti; } T_MA_INFO; /*************************************************************/ /* Dedicated channel parameter structure... */ /*************************************************************/ /* */ /*************************************************************/ typedef struct { T_CHANNEL_INFO *achan_ptr; // Ptr to the Active channel (chan1 or chan2) T_CHANNEL_INFO chan1; T_CHANNEL_INFO chan2; T_MA_INFO ma; WORD32 serv_sti_fn; // Chan. desc. change time, serving domain.(-1 for not in use). WORD32 neig_sti_fn; // Chan. desc. change time, neighbor domain.(-1 for not in use). // Frequency redefinition ongoing flag. //------------------------------------- UWORD8 freq_redef_flag; // Set to TRUE when a Freq. Redef. must be confirmed. // Timing Advance management. //--------------------------- UWORD8 timing_advance; // Currently used TA. UWORD8 new_timing_advance; // New timing advance value to be used on 1st frame // of the next reporting period. // TXPWR management. //------------------- UWORD8 new_target_txpwr; // New Target value for TXPWR control algo. T_CELL_INFO cell_desc; // Ptr to the new serving cell to download. // DAI test mode... DTX allowed... UWORD8 dai_mode; // Dai test mode. BOOL dtx_allowed; // DTX allowed (flag). // Encryption... T_ENCRYPTION_KEY ciph_key; UWORD8 a5mode; // For handover... UWORD8 ho_acc; // Handover access (part of HO reference) WORD32 ho_acc_to_send; // Set to 4 for SYNC HO and to -1 for ASYNC HO. UWORD8 t3124; // Timer used in Async. Ho. // For DPAGC algorithms purpose UWORD8 G_all[DPAGC_FIFO_LEN]; UWORD8 G_DTX[DPAGC_FIFO_LEN]; #if (AMR == 1) UWORD8 G_amr[DPAGC_AMR_FIFO_LEN]; #endif #if IDS // IDS mode configuration UWORD8 ids_mode; // Information transfert capability coded on 2 bits // 0: speech // 1: data service // 2: fax service #endif #if (AMR == 1) T_AMR_CONFIGURATION amr_configuration; UWORD8 cmip; #endif } T_DEDIC_SET; /*************************************************************/ /* Dedicated channel parameter structure... */ /*************************************************************/ /* */ /*************************************************************/ typedef struct { T_DEDIC_SET *aset; // Ptr to the Active parameter set T_DEDIC_SET *fset; // Ptr to the Free parameter set T_DEDIC_SET set[2]; // Table of parameter set T_MPHC_CHANNEL_MODE_MODIFY_REQ mode_modif; // New mode for a given subchannel. WORD32 SignalCode; // Message name, set when a new param. set is given #if (FF_L1_TCH_VOCODER_CONTROL == 1) UWORD8 reset_sacch; // Flag to control SACCH reset (set during CHAN ASSIGN and Hand-overs) UWORD8 vocoder_on; // Flag to control execution of vocoder UWORD8 start_vocoder; // Flag to trigger start of vocoder (vocoder must be started with a synchro start) #endif UWORD8 sync_tch; // Flag used to synchronize TCH/F or TCH/H. UWORD8 reset_facch; // Flag used to reset FACCH buffer header on new IAS/CAS/handover UWORD8 stop_tch; // Flag used to stop TCH/F or TCH/H (VEGA pwrdown). UWORD16 radio_freq; // ARFCN buffer (returned by hopping algo). UWORD16 radio_freq_d; // 1 frame delayed ARFCN. UWORD16 radio_freq_dd; // 2 frames delayed ARFCN. BOOL pwrc; // Flag used to reject serving pwr meas. on beacon. BOOL handover_fail_mode; // Flag used to indicate that the L1 wait for an handover fail request #if (AMR == 1) BOOL sync_amr; // Flag used to tell to the DSP that a new AMR paramters is ready in the NDB. #endif } T_DEDIC_PARAM; /*************************************************************/ /* Power Management structure... */ /*************************************************************/ typedef struct { // fields of TST_SLEEP_REQ primitive .... UWORD8 mode_authorized; // NONE,SMALL,BIG,DEEP,ALL UWORD32 clocks; // clocks disabled in Big sleep // 32 Khz gauging .... UWORD8 gauging_task; // ACTIVE, INACTIVE,WAIT-IQ UWORD8 gaug_duration; // gauging task duration UWORD8 gaug_count; // gauging task duration compteur UWORD32 histo[SIZE_HIST][2];// gauging histogram UWORD8 enough_gaug; // enough good gauging UWORD8 paging_scheduled; // first Paging Frame // flags and variables for wake-up .... UWORD8 Os_ticks_required; // TRUE : Os ticks to recover UWORD8 frame_adjust; // TRUE : adjust 1 frame UWORD32 sleep_duration; // sleep duration computed at wakeup // flag for sleep .... UWORD8 sleep_performed; // NONE,SMALL,BIG,DEEP,ALL // status of clocks modules .... UWORD32 modules_status; // modules clocks status // constantes for 32Khz filtering UWORD32 c_clk_min; // INIT state UWORD32 c_clk_init_min; // INIT state UWORD32 c_clk_max; // INIT state UWORD32 c_clk_init_max; // INIT state UWORD32 c_delta_hf_acquis; // ACQUIS state UWORD32 c_delta_hf_update; // UPDATE state // trace gauging parameters UWORD8 state; // state of the gauging UWORD32 lf; // Number of the 32KHz UWORD32 hf; // HF: nb_hf( Number of the 13MHz *6 ) UWORD32 root; // root & frac: the ratio of the HF & LF in each state. UWORD32 frac; } T_POWER_MNGT; /*************************************************************/ /* code version structure... */ /*************************************************************/ typedef struct { // DSP versions & checksum UWORD16 dsp_code_version; UWORD16 dsp_patch_version; UWORD16 dsp_checksum; // DSP checksum : patch+code // MCU versions UWORD16 mcu_tcs_program_release; UWORD16 mcu_tcs_official; UWORD16 mcu_tcs_internal; UWORD16 mcu_tm_version; } T_VERSION; #if L1_RECOVERY typedef struct { UWORD32 frame_count; } T_L1S_RECOVER; #endif /***************************************************************************************/ /* L1S global variable structure... */ /***************************************************************************************/ typedef struct { //++++++++++++++++++++ // Power Management... //++++++++++++++++++++ T_POWER_MNGT pw_mgr; // data base for power management // Time for debug & Simulation purpose... // -> used as base time for BTS simulation. //----------------------------------------- UWORD32 debug_time; // time counter used by L3 scenario... // L1S Tasks management... //----------------------------------------- T_TASK_STATUS task_status[NBR_DL_L1S_TASKS]; // ...in L1S, scheduler. UWORD8 frame_count; // ...nb frames to go. UWORD8 forbid_meas; // ...frames where meas. ctrl is not allowed. // MFTAB management variables... //----------------------------------------- UWORD8 afrm; // active frame ID. T_MFTAB FAR mftab; // Multiframe table. // Control parameters... //----------------------------------------- UWORD32 afc_frame_count; // AFC, Frame count between 2 calls to afc control function. WORD16 afc; // AFC, Common Frequency controle. WORD16 toa_shift; // TOA, value used to update the TOA UWORD8 toa_snr_mask; // TOA, mask counter to reject TOA/SNR results. UWORD16 toa_period_count; // TOA frame period used in PACKET TRANSFER MODE BOOL toa_update; // TOA, is set at the end of the update period, toa update occurs on next valid frame // Flag registers for RF task controle... //----------------------------------------- // Made these control registers short's as more than 8-bits required. UWORD16 tpu_ctrl_reg; // (x,x,x,x,SYNC,RX,TX,MS) RX/TX/MS/SYNC bit ON whenever an // according "controle" has been setup in the current frame. UWORD16 dsp_ctrl_reg; // (x,x,x,x,x,RX,TX,MS) RX/TX/MS bit ON whenever an // according "controle" has been setup in the current frame. //+++++++++++++++++++ // Serving... //+++++++++++++++++++ // Serving frame number management. //--------------------------------- T_TIME_INFO actual_time; // Time info: current FN, T1, T2, T3... T_TIME_INFO next_time; // Time info: next FN, T1, T2, T3... T_TIME_INFO next_plus_time; // Time info: next FN, T1, T2, T3... // TXPWR management. //------------------- UWORD8 reported_txpwr; // Reported value for TXPWR. UWORD8 applied_txpwr; // Current value for TXPWR. // Last RXQUAL value. //------------------- UWORD8 rxqual; // last rxqual value. // Hardware info. //--------------- UWORD32 tpu_offset; // Current TPU offset register value safeguard. UWORD32 tpu_offset_hw; // Current TPU offset register value copied in the TPU. UWORD16 tpu_win; // tpu window identifier inside a TDMA. // code versions T_VERSION version; #if (L1_GTT == 1) UWORD8 tty_state; // state for L1S GTT manager. #if L2_L3_SIMUL // GTT test T_GTT_TEST_L1S gtt_test; #endif #endif #if (L1_DYN_DSP_DWNLD == 1) UWORD8 dyn_dwnld_state; // state for L1S DYN DWNLD manager #endif #if (AUDIO_TASK == 1) // Audio task. //----------------------------------------- BOOL l1_audio_it_com; // Flag to enable the ITCOM. UWORD8 audio_state[NBR_AUDIO_MANAGER]; // state for L1S audio manager. #if (MELODY_E1) T_L1S_MELODY_TASK melody0; T_L1S_MELODY_TASK melody1; #endif #if (VOICE_MEMO) T_L1S_VM_TASK voicememo; #endif #if (L1_VOICE_MEMO_AMR) T_L1S_VM_AMR_TASK voicememo_amr; #endif #if (SPEECH_RECO) T_L1S_SR_TASK speechreco; #endif #if (AEC) T_L1S_AEC_TASK aec; #endif #if (MELODY_E2) T_L1S_MELODY_E2_COMMON_VAR melody_e2; T_L1S_MELODY_E2_TASK melody0_e2; T_L1S_MELODY_E2_TASK melody1_e2; #endif #endif UWORD8 last_used_txpwr; #if L1_GPRS BOOL ctrl_synch_before; //control of synchro for CCCH reading en TN-2 #endif #if L1_RECOVERY T_L1S_RECOVER recovery; #endif BOOL spurious_fb_detected; // Handling DTX mode BOOL dtx_ul_on; WORD8 facch_bursts; // DTX mode in AMR BOOL dtx_amr_dl_on; // set to TRUE when the AMR is in DTX mode in downlink } T_L1S_GLOBAL; /***************************************************************************************/ /* L1A global variable structure... */ /***************************************************************************************/ typedef struct { // State for L1A state machines... //----------------------------------------- UWORD8 state[NBR_L1A_PROCESSES]; // Measurement tasks management... //----------------------------------------- UWORD32 l1a_en_meas[NBR_L1A_PROCESSES]; // Flag for forward/delete message management. //--------------------------------------------- UWORD8 l1_msg_forwarded; #if (L1_DYN_DSP_DWNLD == 1) // Dynamic donload global variables T_L1A_DYN_DWNLD_GLOBAL dyn_dwnld; #endif // signal code indicating the reason of L1C_DEDIC_DONE UWORD32 confirm_SignalCode; // Trace the best frequencies reported in MPHC_RXLEV_IND #if (L1_MPHC_RXLEV_IND_REPORT_SORT==1) UWORD16 tab_index[MAX_MEAS_RXLEV_IND_TRACE]; UWORD16 max_report; //max number of fq reported, can be < MAX_MEAS_RXLEV_IND_TRACE if list is smaller #endif } T_L1A_GLOBAL; /***************************************************************************************/ /* L1A -> L1S communication structure... */ /***************************************************************************************/ typedef struct { //+++++++++++++++++++ // Serving Cell... //+++++++++++++++++++ // Serving Cell identity and information. //--------------------------------------- T_CELL_INFO Scell_info; T_SMEAS Smeas_dedic; UWORD8 Scell_IL_for_rxlev; T_INPUT_LEVEL Scell_used_IL; T_INPUT_LEVEL Scell_used_IL_d; T_INPUT_LEVEL Scell_used_IL_dd; T_BCCHS nbcchs; T_BCCHS ebcchs; // Synchro information. //--------------------------------------- WORD8 tn_difference; // Timeslot difference for next synchro. UWORD8 dl_tn; // Current timeslot for downlink stuffs. #if L1_GPRS UWORD8 dsp_scheduler_mode; // DSP Scheduler mode (GPRS or GSM). #endif // Idle parameters. //----------------- BOOL bcch_combined; // BS_CCCH_SDCCH_COMB flag. UWORD8 bs_pa_mfrms; // BS_PA_MFRMS parameter. UWORD8 bs_ag_blks_res; // BS_AG_BLKS_RES parameter. UWORD8 ccch_group; // CCCH_GROUP parameter. UWORD8 page_group; // PAGING_GROUP parameter. UWORD8 page_block_index; // Paging block index paramter. T_IDLE_TASK_INFO idle_task_info; // Idle task positions... UWORD8 nb_pch_per_mf51; // nbr paging blocks per mf51. // CBCH parameters. // ---------------- UWORD32 offset_tn0; // TPU offset for TN=0 (used for SMSCB only). T_CHANNEL_DESCRIPTION cbch_desc; // CBCH (SMSCB) channel description. T_MOBILE_ALLOCATION cbch_freq_list; // CBCH frequency list (hopping freq list). UWORD32 mf51_fn; // Starting FN (for CBCH reading. UWORD8 cbch_start_in_mf51; // Starting position of CBCH in the MF51. T_CBCH_HEAD_SCHEDULE norm_cbch_schedule; // Normal CBCH scheduling structure. T_CBCH_HEAD_SCHEDULE ext_cbch_schedule; // Extended CBCH scheduling structure. T_CBCH_INFO_SCHEDULE cbch_info_req; BOOL pre_scheduled_cbch; // CBCH task has to be scheduled 1 FN in advance BOOL change_synchro_cbch;// A Pseudo Synchro is needed to read CBCH block UWORD8 tn_smscb; // CBCH TN taking into account new Synchro // Random Access information. // ---------------------------- T_RA_TASK_INFO ra_info; // ADC management. //------------------- UWORD16 adc_mode; UWORD8 adc_idle_period; UWORD8 adc_traffic_period; UWORD8 adc_cpt; // TXPWR management. //------------------- UWORD8 powerclass_band1; // Power class for the MS, given in ACCESS LINK mode (GSM Band). UWORD8 powerclass_band2; // Power class for the MS, given in ACCESS LINK mode (DCS Band). // Dedicated parameters. //---------------------- T_DEDIC_PARAM dedic_set; // Dedicated channel parameters. //+++++++++++++++++++ // Neighbour Cells... //+++++++++++++++++++ T_BCCHN_LIST bcchn; T_NSYNC_LIST nsync; // BA list / FULL list. //--------------------- T_BA_LIST ba_list; T_FULL_LIST full_list; T_FULL_LIST_MEAS *full_list_ptr; //+++++++++++++++++++ // L1S scheduler... //+++++++++++++++++++ // L1S tasks management... //----------------------------------------- BOOL task_param[NBR_DL_L1S_TASKS]; // ...synchro semaphores. BOOL l1s_en_task[NBR_DL_L1S_TASKS]; // ...enable register. UWORD32 time_to_next_l1s_task; // time to wait to reach starting frame of next task. UWORD8 l1a_activity_flag; // Activity flag. // Measurement tasks management... //----------------------------------------- UWORD32 meas_param; // Synchro semaphore bit register. UWORD32 l1s_en_meas; // Enable task bit register. // L1 mode... //----------------------------------------- UWORD32 mode; // functional mode: CS_MODE, I_MODE... //++++++++++++++++++++++++ // Controle parameters... //++++++++++++++++++++++++ UWORD32 fb_mode; // Mode for fb detection algorithm. UWORD8 toa_reset; // Flag for TOA algo. reset. // Input level memory for AGC management. //--------------------------------------- T_INPUT_LEVEL last_input_level[NBMAX_CARRIER+1]; BOOL recovery_flag; // in case of the system is down and needs to be recovered //++++++++++++++++++++++++ // Audio task... //++++++++++++++++++++++++ #if (AUDIO_TASK == 1) #if (KEYBEEP) T_KEYBEEP_TASK keybeep_task; #endif #if (TONE) T_TONE_TASK tone_task; #endif #if (MELODY_E1) T_MELODY_TASK melody0_task; T_MELODY_TASK melody1_task; #endif #if (VOICE_MEMO) T_VM_TASK voicememo_task; #endif #if (L1_VOICE_MEMO_AMR) T_VM_AMR_TASK voicememo_amr_task; #endif #if (SPEECH_RECO) T_SR_TASK speechreco_task; #endif #if (AEC) T_AEC_TASK aec_task; #endif #if (FIR) T_FIR_TASK fir_task; #endif #if (AUDIO_MODE) T_AUDIO_MODE_TASK audio_mode_task; #endif #if (MELODY_E2) T_MELODY_E2_TASK melody0_e2_task; T_MELODY_E2_TASK melody1_e2_task; #endif #if (L1_CPORT == 1) T_CPORT_TASK cport_task; #endif #endif //+++++++++++++ // GTT task //+++++++++++++ #if (L1_GTT == 1) T_GTT_TASK gtt_task; #endif // Dynamic DSP download task #if (L1_DYN_DSP_DWNLD == 1) T_DYN_DWNLD_TASK_COMMAND dyn_dwnld_task; #endif } T_L1A_L1S_COM; /***************************************************************************************/ /* L1A -> DSP communication structure... */ /***************************************************************************************/ typedef struct { UWORD8 dsp_w_page; // Active page for ARM "writting" to DSP {0,1}. UWORD8 dsp_r_page; // Active page for ARM "reading" from DSP {0,1}. UWORD8 dsp_r_page_used; // Used in "l1_synch" to know if the read page must be chged. T_DB_DSP_TO_MCU *dsp_db_r_ptr; // MCU<->DSP comm. read page (Double Buffered comm. memory). T_DB_MCU_TO_DSP *dsp_db_w_ptr; // MCU<->DSP comm. write page (Double Buffered comm. memory). T_NDB_MCU_DSP *dsp_ndb_ptr; // MCU<->DSP comm. read/write (Non Double Buffered comm. memory). T_PARAM_MCU_DSP *dsp_param_ptr; // MCU<->DSP comm. read/write (Param comm. memory). #if (DSP_DEBUG_TRACE_ENABLE == 1) T_DB2_DSP_TO_MCU *dsp_db2_current_r_ptr; T_DB2_DSP_TO_MCU *dsp_db2_other_r_ptr; #endif } T_L1S_DSP_COM; /***************************************************************************************/ /* L1A -> TPU communication structure... */ /***************************************************************************************/ typedef struct { UWORD8 tpu_w_page; // Active page for ARM "writting" to TPU {0,1}. UWORD32 *tpu_page_ptr; // Current Pointer within the active "tpu_page". #if (CODE_VERSION == SIMULATION) T_reg_cmd *reg_cmd; // command register for TPU & DSP enabling and pages pgmation #else UWORD16 *reg_cmd; // command register for TPU & DSP enabling and pages pgmation #endif UWORD32 *reg_com_int; // communication int. register UWORD32 *offset; // offset register } T_L1S_TPU_COM; /***************************************************************************************/ /* L1 configuration structure */ /***************************************************************************************/ typedef struct { UWORD8 id; //standard identifier UWORD16 radio_band_support; UWORD8 swap_iq_band1; UWORD8 swap_iq_band2; UWORD32 first_radio_freq; UWORD32 first_radio_freq_band2; UWORD32 radio_freq_index_offset; UWORD32 nbmax_carrier; UWORD32 nbmeas; UWORD32 max_txpwr_band1; UWORD32 max_txpwr_band2; UWORD32 txpwr_turning_point; UWORD16 cal_freq1_band1; UWORD16 cal_freq1_band2; UWORD16 g_magic_band1; UWORD16 g_magic_band2; UWORD16 lna_att_band1; UWORD16 lna_att_band2; UWORD16 lna_switch_thr_low_band1; UWORD16 lna_switch_thr_low_band2; UWORD16 lna_switch_thr_high_band1; UWORD16 lna_switch_thr_high_band2; } T_L1_STD_CNFG; //RF dependent parameter definitions typedef struct { UWORD16 rx_synth_setup_time; UWORD8 rx_synth_load_split; WORD16 rx_synth_start_time; WORD16 rx_change_offset_time; WORD16 rx_change_synchro_time; UWORD8 rx_tpu_scenario_ending; UWORD16 tx_synth_setup_time; UWORD8 tx_synth_load_split; WORD16 tx_synth_start_time; WORD16 tx_change_offset_time; WORD16 tx_nb_duration; WORD16 tx_ra_duration; UWORD8 tx_nb_load_split; UWORD8 tx_ra_load_split; UWORD8 tx_tpu_scenario_ending; WORD16 fb26_anchoring_time; WORD16 fb26_change_offset_time; UWORD32 prg_tx_gsm; UWORD32 prg_tx_dcs; UWORD16 low_agc_noise_thr; UWORD16 high_agc_sat_thr; UWORD16 low_agc; UWORD16 high_agc; UWORD16 il_min; UWORD16 fixed_txpwr; WORD16 eeprom_afc; WORD8 setup_afc_and_rf; UWORD32 psi_sta_inv; UWORD32 psi_st; UWORD32 psi_st_32; UWORD32 psi_st_inv; #if (VCXO_ALGO==1) WORD16 afc_dac_center; WORD16 afc_dac_min; WORD16 afc_dac_max; WORD16 afc_snr_thr; UWORD8 afc_algo; UWORD8 afc_win_avg_size_M; UWORD8 rgap_algo; UWORD8 rgap_bad_snr_count_B; #endif UWORD8 guard_bits; #if DCO_ALGO BOOL dco_enabled; #endif #if (ANLG_FAM == 1) UWORD16 debug1; UWORD16 afcctladd; UWORD16 vbuctrl; UWORD16 vbdctrl; UWORD16 bbctrl; UWORD16 apcoff; UWORD16 bulioff; UWORD16 bulqoff; UWORD16 dai_onoff; UWORD16 auxdac; UWORD16 vbctrl; UWORD16 apcdel1; #endif #if (ANLG_FAM == 2) UWORD16 debug1; UWORD16 afcctladd; UWORD16 vbuctrl; UWORD16 vbdctrl; UWORD16 bbctrl; UWORD16 bulgcal; UWORD16 apcoff; UWORD16 bulioff; UWORD16 bulqoff; UWORD16 dai_onoff; UWORD16 auxdac; UWORD16 vbctrl1; UWORD16 vbctrl2; UWORD16 apcdel1; UWORD16 apcdel2; #endif #if (ANLG_FAM == 3) UWORD16 debug1; UWORD16 afcctladd; UWORD16 vbuctrl; UWORD16 vbdctrl; UWORD16 bbctrl; UWORD16 bulgcal; UWORD16 apcoff; UWORD16 bulioff; UWORD16 bulqoff; UWORD16 dai_onoff; UWORD16 auxdac; UWORD16 vbctrl1; UWORD16 vbctrl2; UWORD16 apcdel1; UWORD16 apcdel2; UWORD16 vbpop; UWORD16 vau_delay_init; UWORD16 vaud_cfg; UWORD16 vauo_onoff; UWORD16 vaus_vol; UWORD16 vaud_pll; #endif #if L1_GPRS UWORD16 toa_pm_thres; // PM threshold for TOA algorithm feeding in packet transfer mode #endif } T_L1_PARAMS; typedef struct { T_L1_STD_CNFG std; //standard: GSM,GSM_E,GSM850,DCS,PCS,DUAL,DUALEXT UWORD8 pwr_mngt; //power management active UWORD8 tx_pwr_code; UWORD16 dwnld; T_L1_PARAMS params; double dpll; //dpll factor #if TESTMODE //Define the TestMode flag and TestMode parameters UWORD8 TestMode; UWORD8 agc_enable; UWORD8 afc_enable; UWORD8 adc_enable; T_TM_PARAMS tmode; //TestMode parameters structure #endif } T_L1_CONFIG; /***************************************************************************************/ /* API HISR -> L1A communication structure... Defined in case dynamic download is defined */ /***************************************************************************************/ /***************************************************************************************/ /* Global API HISR -Defined in case dynamic download is defined /***************************************************************************************/ #if(L1_DYN_DSP_DWNLD==1) typedef struct { T_L1A_DYN_DWNLD_HISR_COM dyn_dwnld; } T_L1A_API_HISR_COM; typedef struct { T_L1_DYN_DWNLD_API_HISR dyn_dwnld; } T_L1_API_HISR; #endif