--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/chipsetsw/drivers/drv_core/clkm/clkm.h	Mon Jun 01 03:24:05 2015 +0000
@@ -0,0 +1,426 @@
+/******************************************************************************
+            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION           
+                                                                             
+   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only 
+   Unauthorized reproduction and/or distribution is strictly prohibited.  This 
+   product  is  protected  under  copyright  law  and  trade  secret law as an 
+   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All 
+   rights reserved.                                                            
+                  
+                                                           
+   Filename       	: clkm.h
+
+   Description    	: Header file for the CLKM module
+
+   Project        	: drivers
+
+   Author         	: pmonteil@tif.ti.com  Patrice Monteil.
+
+   Version number   : 1.19
+
+   Date and time    : 07/01/03
+
+   Previous delta 	: 10/19/01 15:25:25
+
+   SCCS file      	: /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/mod/emu_p/EMU_P_FRED_CLOCK/drivers1/common/SCCS/s.clkm.h
+
+   Sccs Id  (SID)       : '@(#) clkm.h 1.10 10/23/01 14:34:54 '
+
+ 
+*****************************************************************************/
+
+#include "l1sw.cfg"
+#include "chipset.cfg"
+#include "board.cfg"
+
+#if (OP_L1_STANDALONE == 0)
+  #include "main/sys_types.h"
+#else
+  #include "sys_types.h"
+#endif
+
+#if (CHIPSET == 12)
+    #include "sys_map.h"
+#endif
+
+#if (CHIPSET == 12)
+  #define CLKM_ARM_CLK        C_MAP_CLKM_BASE   /* CLKM registers addr. */
+#else
+  #define CLKM_ARM_CLK        MEM_CLKM_ADDR     /* CLKM ARM CLock Control reg.*/
+#endif
+#define CLKM_MCLK_EN	0x0001 
+
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+   #define MASK_CLKIN       0x0006
+#endif
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define CLKM_CLKIN0       0x0002            // Mask to select between DPLL and VTCXO or CLKIN
+#else
+  #define CLKM_LOW_FRQ	    0x0002            // Mask to select low frequency input CLK_32K 
+#endif
+#define CLKM_CLKIN_SEL	    0x0004            // Mask to select between VTCXO and CLKIN 
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define CLKM_ARM_MCLK_XP5 0x0008            // Mask to enable the 1.5 or 2.5 division factor
+  #define CLKM_MCLK_DIV     0x0070            // Mask to configure the division factor
+#else
+  #define MASK_ARM_MCLK_1P5 0x0008            // Mask to enable the 1.5 division factor
+  #define CLKM_MCLK_DIV	    0x0030            // Mask to configure the division factor
+#endif
+
+#define CLKM_DEEP_PWR	    0x0f00            // Mask to configure deep power
+#define CLKM_DEEP_SLEEP	    0x1000            // Mask to configure deep sleep
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define CLKM_SEL_DPLL     0x0000            // Selection of DPLL for ARM clock generation
+  #define CLKM_SEL_VTCXO    0x0001            // Selection of VTCXO for ARM clock generation
+  #define CLKM_SEL_CLKIN    0x0003            // Selection of CLKIN for ARM clock generation
+  
+  #define CLKM_ENABLE_XP5   0x0001            // Enable 1.5 or 2.5 division factor
+  #define CLKM_DISABLE_XP5  0x0000            // Disable 1.5 or 2.5 division factor
+  
+  #define CLKM_ARM_MCLK_DIV_OFFSET 4          // Offset of ARM_MCLK_DIV bits in CNTL_ARM_CLK register
+  
+  #define CLKM_ARM_CLK_RESET 0x1081           // Reset value of CNTL_ARM_CLK register
+#endif
+
+#if (CHIPSET == 12)
+  #define CLKM_CNTL_ARM_CLK  (C_MAP_CLKM_BASE + 0x00)
+  #define CLKM_CNTL_CLK     (C_MAP_CLKM_BASE + 2)   /* CLKM Clock Control reg. */
+#else
+  #define CLKM_CNTL_ARM_CLK  (MEM_CLKM_ADDR + 0x00)
+  #define CLKM_CNTL_CLK     (MEM_CLKM_ADDR + 2)     /* CLKM Clock Control reg. */
+#endif
+
+#define CLKM_IRQ_DIS        0x0001     // IRQ clock is disabled and enabled according to the sleep command
+#define CLKM_BRIDGE_DIS	    0x0002     // BRIDGE clock is disabled and enabled according to the sleep command
+#define CLKM_TIMER_DIS	    0x0004     // TIMER clock is disabled and enabled according to the sleep command
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define CLKM_DPLL_DIS     0x0008     // DPLL is set in IDLE when both DSP and ARM are respectively in IDLE3 and sleep mode
+#else
+  #define CLKM_PLL_SEL	    0x0008     // CLKIN input is connected to the PLL
+#endif
+#define CLKM_CLKOUT_EN	    0x0010     // Enable CLKOUT(2:0) output clocks
+#if (CHIPSET == 4)
+  #define CLKM_EN_IDLE3_FLG 0x0020     // DSP idle flag control the API wait state
+  #define CLKM_VTCXO_26     0x0040     // VTCXO is divided by 2
+#elif (CHIPSET == 6)
+  #define CLKM_VTCXO_26     0x0040     // VTCXO is divided by 2
+#elif (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)
+  #define CLKM_EN_IDLE3_FLG 0x0020     // DSP idle flag control the API wait state
+  #define CLKM_VCLKOUT_2    0x0040     // VTCXO is divided by 2
+  #define CLKM_VTCXO_2      0x0080     // Input clock to DPLL is divided by 2
+#endif
+
+#if (CHIPSET == 12)
+  #define CLKM_CNTL_RST   (C_MAP_CLKM_BASE + 4)   /* CLKM Reset Control reg. */
+#else
+  #define CLKM_CNTL_RST   (MEM_CLKM_ADDR + 4)     /* CLKM Reset Control reg. */
+#endif
+#define CLKM_LEAD_RST 	0x0002
+#define CLKM_EXT_RST 	0x0004
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define DPLL_LOCK         0x0001     // Mask of DPLL lock status
+  #define DPLL_BYPASS_DIV   0x000C     // Mask of bypass mode configuration
+  #define DPLL_PLL_ENABLE   0x0010     // Enable DPLL
+  #define DPLL_PLL_DIV      0x0060     // Mask of division factor configuration
+  #define DPLL_PLL_MULT     0x0F80     // Mask of multiply factor configuration
+
+  #define DPLL_BYPASS_DIV_1 0x00       // Configuration of bypass mode divided by 1
+  #define DPLL_BYPASS_DIV_2 0x01       // Configuration of bypass mode divided by 2
+  #define DPLL_BYPASS_DIV_4 0x10       // Configuration of bypass mode divided by 4
+  
+  #define DPLL_BYPASS_DIV_OFFSET 2     // Offset of bypass bits configuration
+  #define DPLL_PLL_DIV_OFFSET    5     // Offset of division bits configuration
+  #define DPLL_PLL_MULT_OFFSET   7     // Offset of multiply bits configuration
+  
+  #define DPLL_LOCK_DIV_1   0x0000     // Divide by 1 when DPLL is locked
+  #define DPLL_LOCK_DIV_2   0x0001     // Divide by 2 when DPLL is locked
+  #define DPLL_LOCK_DIV_3   0x0002     // Divide by 3 when DPLL is locked
+  #define DPLL_LOCK_DIV_4   0x0003     // Divide by 4 when DPLL is locked
+  
+#else
+  #define CLKM_LEAD_PLL_CNTL (MEM_CLKM_ADDR + 6)     /* Lead PLL */
+  #define CLKM_PLONOFF	0x0001         // PLL enable signal
+  #define CLKM_PLMUL	0x001e         // Mask of multiply factor configuration
+  #define CLKM_PLLNDIV	0x0020         // PLL or divide mode selection
+  #define CLKM_PLDIV	0x0040         // Mask of multiply factor configuration
+  #define CLKM_LEAD_PLL_CNTL_MSK 0x00ef // Mask of PLL control register
+#endif
+
+#if (CHIPSET == 12)
+  #define CLKM_CNTL_CLK_DSP (C_MAP_CLKM_BASE + 0x8A)   /* CLKM CNTL_CLK_REG register */
+  
+  #define CLKM_NB_DSP_DIV_VALUE   4
+  
+  #define CLKM_DSP_DIV_1    0x00
+  #define CLKM_DSP_DIV_1_5  0x01
+  #define CLKM_DSP_DIV_2    0x02
+  #define CLKM_DSP_DIV_3    0x03
+  
+  #define CLKM_DSP_DIV_MASK 0x0003
+  
+  extern const double dsp_div_value[CLKM_NB_DSP_DIV_VALUE];
+  
+  /*---------------------------------------------------------------
+   *  CLKM_DSP_DIV_FACTOR()	
+   *--------------------------------------------------------------
+   * Parameters : none						
+   * Return     :	none						
+   * Functionality : Set the DSP division factor			
+   *--------------------------------------------------------------*/
+
+  #define CLKM_DSP_DIV_FACTOR(d_dsp_div) (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK_DSP = d_dsp_div)
+
+
+  /*---------------------------------------------------------------
+   *  CLKM_READ_DSP_DIV()						
+   *--------------------------------------------------------------
+   * Parameters : none						
+   * Return     :	none						
+   * Functionality : Read DSP division factor			
+   *--------------------------------------------------------------*/
+
+  #define CLKM_READ_DSP_DIV               ((* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK_DSP) & CLKM_DSP_DIV_MASK)
+  
+  #define CLKM_GET_DSP_DIV_VALUE          dsp_div_value[CLKM_READ_DSP_DIV]
+
+#endif
+
+
+/*---------------------------------------------------------------
+ *  CLKM_SETLEADRESET()						
+ *--------------------------------------------------------------
+ * Parameters : none						
+ * Return     :	none						
+ * Functionality : Set the LEAD reset signal
+ *--------------------------------------------------------------*/
+
+#define CLKM_SETLEADRESET (* (volatile SYS_UWORD16 *) CLKM_CNTL_RST |= CLKM_LEAD_RST)
+
+/*---------------------------------------------------------------
+ *  CLKM_RELEASELEADRESET()					
+ *--------------------------------------------------------------
+ * Parameters : none						
+ * Return     :	none						
+ * Functionality : Release the LEAD reset signal		
+ *--------------------------------------------------------------*/
+
+#define CLKM_RELEASELEADRESET (* (volatile SYS_UWORD16 *) CLKM_CNTL_RST &= ~CLKM_LEAD_RST)
+
+/*---------------------------------------------------------------
+ *  CLKM_SETEXTRESET()						
+ *--------------------------------------------------------------
+ * Parameters : none						
+ * Return     :	none						
+ * Functionality : Set the external reset signal		
+ *--------------------------------------------------------------*/
+
+#define CLKM_SETEXTRESET ( * (volatile SYS_UWORD16 *) CLKM_CNTL_RST |= CLKM_EXT_RST)
+
+/*---------------------------------------------------------------
+ *  CLKM_CLEAREXTRESET()					
+ *--------------------------------------------------------------
+ * Parameters : none						
+ * Return     :	none						
+ * Functionality : Clear the external reset signal		
+ *--------------------------------------------------------------*/
+
+#define CLKM_CLEAREXTRESET (* (volatile SYS_UWORD16 *) CLKM_CNTL_RST &= ~CLKM_EXT_RST)
+
+
+/*---------------------------------------------------------------
+ *  CLKM_POWERDOWNARM()						
+ *--------------------------------------------------------------
+ * Parameters : none						
+ * Return     :	none						
+ * Functionality : Power down the ARM mcu			
+ *--------------------------------------------------------------*/
+#define  CLKM_POWERDOWNARM (* (volatile SYS_UWORD16 *) CLKM_ARM_CLK &= ~CLKM_MCLK_EN)
+
+/*---------------------------------------------------------------
+ *  CLKM_SET1P5()						
+ *--------------------------------------------------------------
+ * Parameters : none						
+ * Return     :	none						
+ * Functionality : Set ARM_MCLK_1P5 bit				
+ *--------------------------------------------------------------*/
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define CLKM_SETXP5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK |= CLKM_ARM_MCLK_XP5)
+#else
+  #define CLKM_SET1P5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK |= 0x0008)
+#endif
+
+/*---------------------------------------------------------------
+ *  CLKM_RESET1P5()						
+ *--------------------------------------------------------------
+ * Parameters : none						
+ * Return     :	none						
+ * Functionality : Reset ARM_MCLK_1P5 bit			
+ *--------------------------------------------------------------*/
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define CLKM_RESETXP5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK &= ~CLKM_ARM_MCLK_XP5)
+#else
+  #define CLKM_RESET1P5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK &= 0xfff7)
+#endif
+
+/*---------------------------------------------------------------
+ *  CLKM_INITCNTL()						
+ *--------------------------------------------------------------
+ * Parameters : value to write in the CNTL register
+ * Return     :	none						
+ * Functionality :Initialize the CLKM Control Clock register
+ *--------------------------------------------------------------*/
+
+#define CLKM_INITCNTL(value) (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= value)
+
+
+#if ((CHIPSET != 4) && (CHIPSET != 7) && (CHIPSET != 8) && (CHIPSET != 10) && (CHIPSET != 11) && (CHIPSET != 12))
+  /*---------------------------------------------------------------
+   *  CLKM_INITLEADPLL()						
+   *--------------------------------------------------------------
+   * Parameters : value to write in the CNTL_PLL LEAD register	
+   * Return     :	none						
+   * Functionality :Initialize LEAD PLL control register	
+   *--------------------------------------------------------------*/
+
+  #define CLKM_INITLEADPLL(value) (* (volatile SYS_UWORD16 *) CLKM_LEAD_PLL_CNTL = value)
+#endif
+
+#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  /*--------------------------------------------------------------
+   *  CLKM_DPLL_SWITH_OFF_MODE_CONFIG()                           
+   *--------------------------------------------------------------
+   * Parameters : None                                            
+   * Return     : none                                            
+   * Functionality : Configure DPLL switch off mode               
+   *--------------------------------------------------------------*/
+
+  #define CLKM_DPLL_SWITH_OFF_MODE_CONFIG (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= \
+             (CLKM_DPLL_DIS | CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS))
+             
+  /*--------------------------------------------------------------
+   *  CLKM_RESET_DPLL_SWITH_OFF_MODE_CONFIG()                     
+   *--------------------------------------------------------------
+   * Parameters : None                                            
+   * Return     : none                                            
+   * Functionality : Reset configuration of DPLL switch off mode  
+   *--------------------------------------------------------------*/
+             
+  #define CLKM_RESET_DPLL_SWITH_OFF_MODE_CONFIG (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK &=\
+            ~(CLKM_DPLL_DIS | CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS))
+
+  /*--------------------------------------------------------------
+   *  CLKM_FORCE_API_HOM_IN_IDLE3()                               
+   *--------------------------------------------------------------
+   * Parameters : None                                            
+   * Return     : none                                            
+   * Functionality : SAM/HOM wait-state register force to HOM when
+   *                 DSP is in IDLE3 mode                         */
+  /*--------------------------------------------------------------*/
+
+  #define CLKM_FORCE_API_HOM_IN_IDLE3 (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= (CLKM_EN_IDLE3_FLG))
+
+  #if (CHIPSET == 4)
+    /*--------------------------------------------------------------
+     *  CLKM_USE_VTCXO_26MHZ()                                      
+     *--------------------------------------------------------------
+     * Parameters : None                                            
+     * Return     : none                                            
+     * Functionality : Divide by 2 the clock used by the peripheral 
+     *                 when using external VTCXO at 26 MHz instead  
+     *                 of 13MHz                                     
+     *--------------------------------------------------------------*/
+
+    #define CLKM_USE_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= (CLKM_VTCXO_26))
+
+    /*--------------------------------------------------------------
+     *  CLKM_UNUSED_VTCXO_26MHZ()                                   
+     *--------------------------------------------------------------
+     * Parameters : None                                            
+     * Return     : none                                            
+     * Functionality : Use VTCXO=13MHz                              
+     *--------------------------------------------------------------*/
+
+    #define CLKM_UNUSED_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK &= ~(CLKM_VTCXO_26))
+  #elif (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)
+    /*--------------------------------------------------------------
+     *  CLKM_UNUSED_VTCXO_26MHZ()                                   
+     *--------------------------------------------------------------
+     * Parameters : None                                            
+     * Return     : none                                          
+     * Functionality : Use VTCXO=13MHz                              
+     *--------------------------------------------------------------*/
+
+    #define CLKM_USE_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= (CLKM_VTCXO_2))
+
+    #define CLKM_UNUSED_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK &= ~(CLKM_VCLKOUT_2 | CLKM_VTCXO_2))
+  #endif
+
+  #if (CHIPSET == 12)
+    #define DPLL_SET_PLL_ENABLE (* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE |= DPLL_PLL_ENABLE)
+    #define DPLL_RESET_PLL_ENABLE (* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE &= ~DPLL_PLL_ENABLE)
+  
+    #define DPLL_INIT_BYPASS_MODE(d_bypass_mode) { \
+          *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) &= ~DPLL_BYPASS_DIV; \
+          *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) |= (d_bypass_mode << DPLL_BYPASS_DIV_OFFSET); \
+         }
+    
+    #define DPLL_INIT_DPLL_CLOCK(d_pll_div, d_pll_mult) { \
+          *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) &= ~(DPLL_PLL_DIV | DPLL_PLL_MULT); \
+          *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) |= (d_pll_div << DPLL_PLL_DIV_OFFSET) |\
+                                                          (d_pll_mult << DPLL_PLL_MULT_OFFSET); \
+         }
+
+    #define DPLL_READ_DPLL_DIV ( ((* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) & DPLL_PLL_DIV) >> DPLL_PLL_DIV_OFFSET)
+    #define DPLL_READ_DPLL_MUL ( ((* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) & DPLL_PLL_MULT)>> DPLL_PLL_MULT_OFFSET)
+    #define DPLL_READ_DPLL_LOCK ( (* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) & DPLL_LOCK)
+  #else
+    #define DPLL_SET_PLL_ENABLE (* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR |= DPLL_PLL_ENABLE)
+    #define DPLL_RESET_PLL_ENABLE (* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR &= ~DPLL_PLL_ENABLE)
+  
+    #define DPLL_INIT_BYPASS_MODE(d_bypass_mode) { \
+          *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) &= ~DPLL_BYPASS_DIV; \
+          *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) |= (d_bypass_mode << DPLL_BYPASS_DIV_OFFSET); \
+         }
+    
+    #define DPLL_INIT_DPLL_CLOCK(d_pll_div, d_pll_mult) { \
+          *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) &= ~(DPLL_PLL_DIV | DPLL_PLL_MULT); \
+          *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) |= (d_pll_div << DPLL_PLL_DIV_OFFSET) |\
+                                                          (d_pll_mult << DPLL_PLL_MULT_OFFSET); \
+         }
+
+    #define DPLL_READ_DPLL_DIV ( ((* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR) & DPLL_PLL_DIV) >> DPLL_PLL_DIV_OFFSET)
+    #define DPLL_READ_DPLL_MUL ( ((* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR) & DPLL_PLL_MULT)>> DPLL_PLL_MULT_OFFSET)
+    #define DPLL_READ_DPLL_LOCK ( (* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR) & DPLL_LOCK)
+  #endif /* (CHIPSET == 12) */
+
+
+#endif
+
+/* ----- Prototypes ----- */
+
+#if (BOARD == 34)
+  void CLKM_InitARMClock(int src, int div);
+#elif ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  void CLKM_InitARMClock(SYS_UWORD16 clk_src, SYS_UWORD16 clk_div, SYS_UWORD16 clk_xp5);
+#else
+  void CLKM_InitARMClock(SYS_UWORD16 clk_src, SYS_UWORD16 clk_div);
+#endif
+
+#if (BOARD == 34)
+  void CLKM_SetMclkDiv(int div);
+  void CLKM_EnableDPLL(int enable);
+  void CLKM_EnableSharedMemClock(int enable);
+  void CLKM_InitLeadClock(int onoff, int mul, int ndiv, int div);
+#endif
+
+void wait_ARM_cycles(SYS_UWORD32 cpt_loop);
+void initialize_wait_loop(void);
+SYS_UWORD32 convert_nanosec_to_cycles(SYS_UWORD32 time);
+