FreeCalypso > hg > tcs211-l1-reconst
view chipsetsw/layer1/hmacs/macs_def.h @ 165:4e72d69319d6
dl1_com.c: beginning of reconstruction
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 07 Jun 2016 05:43:40 +0000 |
parents | 509db1a7b7b8 |
children |
line wrap: on
line source
/************* Revision Control System Header ************* * GSM Layer 1 software * MACS_DEF.H * * Filename macs_def.h * Copyright 2003 (C) Texas Instruments * ************* Revision Control System Header *************/ /*********************************************************/ /* Type definition for MAC-S static variables */ /*********************************************************/ /*---------------------------------------------------*/ /* MAC-S static parameters */ /*---------------------------------------------------*/ typedef struct { /* General TBF parameters processed by MAC-S */ /*********************************************/ UWORD8 old_synchro_ts; // Synchro timeslot when data was received on the slots indicated in last_rx_allocation // Dynamic allocation mode parameters UWORD8 first_monitored_ts; // First Tx slot allocated by the network UWORD8 last_monitored_ts; // Last Tx slot allocated by the network // Fixed allocation mode parameters UWORD8 dl_ctrl_ts_mask; // Mask used to verify if conditions are met to map the downlink control timeslot UWORD32 sti_block_id; // Block ID of the starting time /* Ressources allocated by MAC-S */ /*********************************************/ UWORD8 rx_allocation; // Slots allocated for downlink blocks reception UWORD8 tx_allocation; // Slots allocated for uplink blocks transmission UWORD8 tx_data; // Slots allocated for uplink data block transfer only UWORD8 tx_prach_allocation; // Slots allocated for poll response in PRACH burst format UWORD8 pwr_allocation; // Slots allocated for power measurements UWORD8 last_rx_alloc; // Downlink resources allocated during the last block period /* MAC-S global parameters */ /***************************/ UWORD32 rx_blk_period; // Set to BLOCK_ID if DL blocks were received, FFFFFFFF if no DL blocks UWORD8 rlc_blocks_sent; // Last sent uplink RLC/MAC block ID UWORD8 rx_no; // Number of received blocks to report to RLC UWORD8 last_poll_response; // Status of the poll responses requested by RLC the block period before UWORD8 ul_buffer_index[8]; // UL buffer index table loaded after RLC UL allocation check // Dynamic allocation mode parameters UWORD8 usf_vote_enable; // This bitmap is used to set on which timeslot the DSP USF vote must be enabled UWORD8 usf_good; // Bit set to 1 corresponds to invalid or valid and good USF values UWORD32 next_usf_mon_block[2]; // For each uplink block, memorize the next block_id when the USF will be monitored // Note: for type 1 MS, max. 2 Tx can be done !!! // Fixed allocation mode parameters UWORD8 tra_gap; // Number of free Tx slots at the end of the frame BOOL fix_alloc_exhaust; // Set to 1 if the fixed allocation bitmap has exhausted #if MACS_STATUS BOOL bcch_monitoring; // When MAC-S calls RLC, set to TRUE if BCCH monitoring was done during the frame before #endif } T_MACS_STATIC; /*---------------------------------------------------*/ /* MS Class parameters */ /*---------------------------------------------------*/ typedef struct { UWORD8 rx; UWORD8 tx; UWORD8 sum; UWORD8 tta; UWORD8 ttb; UWORD8 tra; UWORD8 trb; } T_MSCLASS_PARAMETERS;