<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with SAPE SAP Editor -->
<SAP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="sap.xsd">
    <DocInfoSection>
        <DocName DocType="SAP">btp</DocName>
        <DocNum Number="100" Project="8445"/>
        <Description>
            <Section>This section contains general information on BTP SAP</Section>
        </Description>
        <DocHistory>
            <DocVersion Number="001" Year="00"/>
            <Date Day="4" Month="9" Year="2000"/>
            <Author>MVI</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Initial</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="002" Year="00"/>
            <Date Day="15" Month="9" Year="2000"/>
            <Author>MVI</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Minor Changes</Comment>
        </DocHistory>
        <DocRef>
            <RefId>[1]</RefId>
            <RefTitle>Rec. T.4 Standardisation of group 3 facsimile apparatus for document transmission;(CCITT-T.4, 1984)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[2]</RefId>
            <RefTitle>ITU-T Recommendation T.30; Series T: Terminal equipments and protocols for telematic services;Procedures for document facsimile transmission in the general switchedtelephone network;(ITU-T.30, 1996)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[3]</RefId>
            <RefTitle>ITU-T Recommendation T.31; Terminals for telematic services;Asynchronous facsimile DCE control - service class 1(ITU-T.31, 1995)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[4]</RefId>
            <RefTitle>ITU-T Recommendation T.32; Terminals for telematic services;Asynchronous facsimile DCE control - service class 2(ITU-T.32, 1995)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[5]</RefId>
            <RefTitle>Rec. T.35; Terminal equipment and protocols for telematic services;Procedures for the allocation of CCITT definde codes for non-standard facilities;(CCITT-T.35, 1991)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[6]</RefId>
            <RefTitle>ITU-T Recommendation V.25 ter; Series V: data communication over the telephone network;Interfaces and voiceband modems; Serial asynchronous automatic dialling and control(ITU-T V.25 ter, 1997)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[7]</RefId>
            <RefTitle>Rec. V.42 bis Data compression procedures for data circuit terminating equipment (DCE) using error correction procedures;(CCITT-V.42 bis, 1990)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[8]</RefId>
            <RefTitle>Rec. V.110 (Blue book, Vol. VIII, Fascicle VIII.1) Support of data terminal equipments (DTEs) with V-series type interfaces by an integrated services digital network (ISDN);(CCITT-V.110, 1988)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[9]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);GSM Public Land Mobile Network (PLMN) connection types;(GSM 3.10, September 1994, version 4.3.1)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[10]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);Technical realisation of facsimile group 3 transparent;(GSM 3.45, September 1995, version 4.5.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[11]</RefId>
            <RefTitle>Digital cellular telecommunications system (Phase 2);Mobile radio interface layer 3 specification;(GSM 4.08, November 1996, version 4.17.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[12]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);Rate adaptation on the Mobile Station - Base Station System (MS - BSS) Interface;(GSM 4.21, May 1995, version 4.6.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[13]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-service Switching Centre (BSS - MSC) interface(GSM 4.22, September 1994, version 4.3.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[14]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-service Switching Centre (BSS - MSC) interface(Amendment prA1 for GSM 4.22, version 4.3.0)(GSM 4.22, March 1995, version 4.4.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[15]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS);(GSM 7.01, December 1995, version 4.10.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[16]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);Terminal Adaptation Functions (TAF) for services using asynchronous bearer capabilities;(GSM 7.02, September 1994, version 4.5.1)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[17]</RefId>
            <RefTitle>European digital cellular telecommunications system (Phase 2);Terminal Adaptation Functions (TAF) for services using synchronous bearer capabilities;(GSM 7.03, September 1994, version 4.5.1)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[18]</RefId>
            <RefTitle>Digital cellular telecommunications system (Phase 2);Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Services (CBS);(GSM 7.05, November 1996, version 4.8.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[19]</RefId>
            <RefTitle>Digital cellular telecommunications system (Phase 2);AT command set for GSM Mobile Equipment (ME)(GSM 7.07, May 1996, version 4.1.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[20]</RefId>
            <RefTitle>Digital cellular telecommunication system (Phase 2);Mobile Station (MS) conformance specification;Part 1: Conformance specification(GSM 11.10-1, November 1996, version 4.17.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[21]</RefId>
            <RefTitle>Digital cellular telecommunications system (Phase 2);Mobile Station (MS) conformance specification;Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification(GSM 11.10-2, May 1996, version 4.15.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[22]</RefId>
            <RefTitle>Digital cellular telecommunications system (Phase 2);Mobile Station (MS) conformance specification;Part 3: Layer 3 (L3) Abstract Test Suite (ATS)(GSM 11.10-3, November 1996, version 4.17.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[23]</RefId>
            <RefTitle>Proposal for Rate Adaptation implemented on a DSP;(C. Bianconi, Texas Instruments, January 1998, version 1.0)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[24]</RefId>
            <RefTitle>MCU-DSP Interfaces for Data Applications;Specification S844(C. Bianconi, Texas Instruments, March 1998, version 0.1)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[25]</RefId>
            <RefTitle>Users Guide6147.300.96.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[26]</RefId>
            <RefTitle>Service Access Point RA8411.100.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[27]</RefId>
            <RefTitle>Service Access Point RLP8411.101.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[28]</RefId>
            <RefTitle>Service Access Point L2R8411.102.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[29]</RefId>
            <RefTitle>Service Access Point FAD8411.103.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[30]</RefId>
            <RefTitle>Service Access Point T308411.104.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[31]</RefId>
            <RefTitle>Service Access Point ACI8411.105.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[32]</RefId>
            <RefTitle>Message Sequence Charts RLP8411.201.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[33]</RefId>
            <RefTitle>Message Sequence Charts L2R8411.202.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[34]</RefId>
            <RefTitle>Message Sequence Charts FAD8411.203.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[35]</RefId>
            <RefTitle>Message Sequence Charts T308411.204.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[36]</RefId>
            <RefTitle>Message Sequence Charts ACI8411.205.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[37]</RefId>
            <RefTitle>Proposal for Fax &amp; Data Integration; March 19988411.300.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[38]</RefId>
            <RefTitle>Test Specification RLP8411.401.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[39]</RefId>
            <RefTitle>Test Specification L2R8411.402.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[40]</RefId>
            <RefTitle>Test Specification FAD8411.403.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[41]</RefId>
            <RefTitle>Test Specification T308411.404.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[42]</RefId>
            <RefTitle>Test Specification ACI8411.405.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[43]</RefId>
            <RefTitle>SDL Specification RLP8411.501.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[44]</RefId>
            <RefTitle>SDL Specification L2R8411.502.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[45]</RefId>
            <RefTitle>SDL Specification FAD8411.503.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[46]</RefId>
            <RefTitle>SDL Specification T308411.504.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[47]</RefId>
            <RefTitle>SDL Specification ACI8411.505.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[48]</RefId>
            <RefTitle>Technical Documentation RLP8411.701.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[49]</RefId>
            <RefTitle>Technical Documentation L2R8411.702.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[50]</RefId>
            <RefTitle>Technical Documentation FAD8411.703.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[51]</RefId>
            <RefTitle>Technical Documentation T308411.704.98.100; Condat GmbH</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[52]</RefId>
            <RefTitle>Technical Documentation ACI8411.705.98.100; Condat GmbH</RefTitle>
        </DocRef>
    </DocInfoSection>
    <ConstantsSection>
        <Description>
            <Section>This section contains all constants that are defined for the BTP SAP</Section>
        </Description>
        <Constant>
            <Alias>BTI_PIN_LENGTH</Alias>
            <Value ValueType="HEX">10</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_BD_ADDR_LENGTH</Alias>
            <Value ValueType="HEX">06</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_BD_NAME_LENGTH</Alias>
            <Value ValueType="HEX">F8</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_MAX_DATA_LENGTH</Alias>
            <Value ValueType="HEX">FF</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_MAX_NB_SERVICES</Alias>
            <Value ValueType="HEX">0A</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_SERVICE_NAME_LENGTH</Alias>
            <Value ValueType="HEX">0F</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_APPLI_NAME_LENGTH</Alias>
            <Value ValueType="HEX">0A</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_HSG_NAME_LENGTH</Alias>
            <Value ValueType="HEX">32</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_PHONE_NUMBER_MAX_LENGTH</Alias>
            <Value ValueType="HEX">1E</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_PHONE_NB_LIST_MAX_LENGTH</Alias>
            <Value ValueType="HEX">04</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_OPP_NAME_MAX_LENGTH</Alias>
            <Value ValueType="HEX">100</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_OPP_MIME_MAX_LENGTH</Alias>
            <Value ValueType="HEX">100</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_SYNC_OBJECT_IDENTIFIER</Alias>
            <Value ValueType="HEX">100</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_DEVICE_CLASS_LENGTH</Alias>
            <Value ValueType="HEX">03</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_HSG_SPECIFIC_CMD_MAX_LENGTH</Alias>
            <Value ValueType="HEX">64</Value>
            <Comment/>
        </Constant>
        <Constant>
            <Alias>BTI_ENTITY_NAME_LEN</Alias>
            <Value ValueType="HEX">06</Value>
            <Comment>maximum length of entity name including NULL</Comment>
        </Constant>
        <History>
            <Date Day="12" Month="12" Year="1954"/>
            <Author>doc2xml</Author>
            <Comment>no history in source document</Comment>
        </History>
    </ConstantsSection>
    <PrimitivesSection PrimIDType="BIT16" SAPid="58">
        <Description>
            <Section>This section contains all primitives that are defined for the BTP SAP</Section>
        </Description>
        <Primitive>
            <Description>
                <Section>This is used to request the initialisation of a Bluetooth profile.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_INIT_PROFILE_REQ</Name>
                <PrimID Direction="UPLINK" Number="0"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation to the BTP_INIT_PROFILE_REQ</Section>
            </Description>
            <PrimDef>
                <Name>BTP_INIT_PROFILE_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="0"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>action</Name>
                </ItemLink>
                <Comment>Action</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>opp_mode</Name>
                </ItemLink>
                <Comment>OPP mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>sync_serv_mode</Name>
                </ItemLink>
                <Comment>SYNC server  mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>sync_init_auth</Name>
                </ItemLink>
                <Comment>SYNC init auth</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to request closing down of a Bluetooth profile.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DEINIT_PROFILE_REQ</Name>
                <PrimID Direction="UPLINK" Number="1"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation for the BTP_DEINIT_PROFILE_REQ.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DEINIT_PROFILE_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="1"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>opp_mode</Name>
                </ItemLink>
                <Comment>OPP mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>sync_serv_mode</Name>
                </ItemLink>
                <Comment>SYNC server  mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>sync_init_auth</Name>
                </ItemLink>
                <Comment>SYNC init auth</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to indicate the signal change (RING_ON/RING_OFF and DCD_ON/DCD_OFF).</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SIGNAL_CHANGE_REQ</Name>
                <PrimID Direction="UPLINK" Number="2"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>signal</Name>
                </ItemLink>
                <Comment>Signal</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to start a device inquiry.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DEVICE_SEARCH_REQ</Name>
                <PrimID Direction="UPLINK" Number="3"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation that the search is finished.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SERVICE_SEARCH_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="3"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>During a search for devices this is used to inform the MMI about found service name and device address.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SERVICE_FOUND_IND</Name>
                <PrimID Direction="DOWNLINK" Number="4"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cod</Name>
                </ItemLink>
                <Control>[BTI_DEVICE_CLASS_LENGTH]</Control>
                <Comment>Bluetooth class of device</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>serv_name</Name>
                </ItemLink>
                <Control>[BTI_SERVICE_NAME_LENGTH]</Control>
                <Comment>Bluetooth service name</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to request connection to a device.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CONNECT_DEVICE_REQ</Name>
                <PrimID Direction="UPLINK" Number="5"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTP</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Confirmation of BTP_CONNECT_DEVICE_REQ.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CONNECT_DEVICE_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="5"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cnf_id</Name>
                </ItemLink>
                <Comment>Confirmation identifier</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a response to a BTP_CONNECT_DEVICE_RES.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CONNECT_DEVICE_RES</Name>
                <PrimID Direction="UPLINK" Number="6"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is an indication that a remote device wants to establish a connection</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CONNECT_DEVICE_IND</Name>
                <PrimID Direction="DOWNLINK" Number="6"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>ind_id</Name>
                </ItemLink>
                <Comment>Indication identifier</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>src_id</Name>
                </ItemLink>
                <Comment>source identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is an information about a bluetooth process</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CONNECT_DEVICE_INF</Name>
                <PrimID Direction="DOWNLINK" Number="43"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>ind_id</Name>
                </ItemLink>
                <Comment>Indication identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to request disconnection from a remote device.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DISCONNECT_DEVICE_REQ</Name>
                <PrimID Direction="UPLINK" Number="7"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation to the BTP_DISCONNECT_DEVICE_REQ.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DISCONNECT_DEVICE_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="7"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cnf_id</Name>
                </ItemLink>
                <Comment>Confirmation identifier</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation to the BTP_DISCONNECT_DEVICE_REQ for Profile DUN and FAX</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DISCON_DUN_FAX_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="2"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>UBYTE</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This indicates disconnection from the remote device</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DISCONNECT_DEVICE_IND</Name>
                <PrimID Direction="DOWNLINK" Number="8"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>ind_id</Name>
                </ItemLink>
                <Comment>Indication identifier</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This indicates disconnection from the remote device</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DISCON_DUN_FAX_IND</Name>
                <PrimID Direction="DOWNLINK" Number="14"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to indicate changes in the state of the audio connection to the MMI</Section>
            </Description>
            <PrimDef>
                <Name>BTP_AUDIO_CONNECTION_IND</Name>
                <PrimID Direction="DOWNLINK" Number="9"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>audio_state</Name>
                </ItemLink>
                <Comment>Audio connection state</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to request the transfer of the audio from the headset to the loudspeaker in the cellular phone.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_TRANSFER_AUDIO_IN_REQ</Name>
                <PrimID Direction="UPLINK" Number="10"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation of BTP_TRANSFER_AUDIO_IN_REQ</Section>
            </Description>
            <PrimDef>
                <Name>BTP_TRANSFER_AUDIO_IN_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="10"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This function is used to transfer the audio from the loudspeaker of the cellular phone to a headset. If a connection is not already established this will be done, and an audio connection will be established as well.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_TRANSFER_AUDIO_OUT_REQ</Name>
                <PrimID Direction="UPLINK" Number="11"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation for BTP_TRANSFER_AUDIO_OUT_REQ</Section>
            </Description>
            <PrimDef>
                <Name>BTP_TRANSFER_AUDIO_OUT_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="11"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cnf_id</Name>
                </ItemLink>
                <Comment>Confirmation identifier</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is an indication that a remote device wants to use a service of the local device.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_AUTHORIZATION_IND</Name>
                <PrimID Direction="DOWNLINK" Number="15"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>appli_name</Name>
                </ItemLink>
                <Control>[BTI_APPLI_NAME_LENGTH]</Control>
                <Comment>Bluetooth appli_name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>authorization_mask_serv</Name>
                </ItemLink>
                <Comment>authorization_mask</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>incom_conn</Name>
                </ItemLink>
                <Comment>type of connection</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is an indication that a PIN is needed.Parameter of remote device.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_PIN_IND</Name>
                <PrimID Direction="DOWNLINK" Number="12"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to request reconfiguration of a profile.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_RECONFIG_PROFILE_REQ</Name>
                <PrimID Direction="UPLINK" Number="13"/>
                <PrimUsage>
                    <Sender>MMI</Sender>
                    <Receiver>BTI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation for BTP_RECONFIG_PROFILE_REQ.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_RECONFIG_PROFILE_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="13"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>opp_mode</Name>
                </ItemLink>
                <Comment>OPP mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>sync_serv_mode</Name>
                </ItemLink>
                <Comment>SYNC server  mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>sync_init_auth</Name>
                </ItemLink>
                <Comment>SYNC init auth</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to trigger a GSM to BT data transfer in simulation.</Section>
            </Description>
            <PrimDef>
                <Name>BTI_SEND_DATA_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="16"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>len</Name>
                </ItemLink>
                <Comment>Data lenght</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>port_nb</Name>
                </ItemLink>
                <Comment>Port number</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>ind_data</Name>
                </ItemLink>
                <Control>[BTI_MAX_DATA_LENGTH]</Control>
                <Comment>Data</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to trigger a BT to GSM data transfer in simulation.</Section>
            </Description>
            <PrimDef>
                <Name>BTI_GET_DATA_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="17"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>len</Name>
                </ItemLink>
                <Comment>Data lenght</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>port_nb</Name>
                </ItemLink>
                <Comment>Port number</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>ind_data</Name>
                </ItemLink>
                <Control>[BTI_MAX_DATA_LENGTH]</Control>
                <Comment>Data</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to send the result value of BT restoring of default device list.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_RESTORE_LIST_RESULT</Name>
                <PrimID Direction="DOWNLINK" Number="18"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to send the result value of BT restoring of configuration parameters.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_RESTORE_CONF_RESULT</Name>
                <PrimID Direction="DOWNLINK" Number="19"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>During a search for services this is used to inform the MMI about each found service to a device.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DEVICE_FOUND_IND</Name>
                <PrimID Direction="DOWNLINK" Number="20"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cod</Name>
                </ItemLink>
                <Control>[BTI_DEVICE_CLASS_LENGTH]</Control>
                <Comment>Bluetooth class of device</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>num_services</Name>
                </ItemLink>
                <Comment>Bluetooth num of services</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>services</Name>
                </ItemLink>
                <Comment>Bluetooth services</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is a confirmation that the search of device is finished.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DEVICE_SEARCH_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="21"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about the pairing procedure with a remote device.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DEVICE_PAIRED_IND</Name>
                <PrimID Direction="DOWNLINK" Number="22"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>pair_result</Name>
                </ItemLink>
                <Comment>pairing result</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about the status of data call profile dun/fax.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CALL_MONITORING_STATUS</Name>
                <PrimID Direction="DOWNLINK" Number="23"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>call_status</Name>
                </ItemLink>
                <Comment>call_monitoring_state</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about the status of data link profile dun/fax.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_LINK_MONITORING_STATUS</Name>
                <PrimID Direction="DOWNLINK" Number="24"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>link_status</Name>
                </ItemLink>
                <Comment>link_monitoring_state</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about the opp client request to push an object to the opp server.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_OPP_SERV_PUT_IND</Name>
                <PrimID Direction="DOWNLINK" Number="25"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_type</Name>
                </ItemLink>
                <Comment>Bluetooth object type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_name</Name>
                </ItemLink>
                <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_m_t</Name>
                </ItemLink>
                <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object mime t</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_length</Name>
                </ItemLink>
                <Comment>Bluetooth object length</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about the success of the object push operation.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_OPP_SERV_PUT_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="26"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_type</Name>
                </ItemLink>
                <Comment>Bluetooth object type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_name</Name>
                </ItemLink>
                <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_m_t</Name>
                </ItemLink>
                <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object mime t</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_length</Name>
                </ItemLink>
                <Comment>Bluetooth object length</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about the object push operation to an OPP server.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_OPP_OBJECT_PUSH_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="27"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_type</Name>
                </ItemLink>
                <Comment>Bluetooth object type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_name</Name>
                </ItemLink>
                <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_m_t</Name>
                </ItemLink>
                <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object mime t</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_length</Name>
                </ItemLink>
                <Comment>Bluetooth object length</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about the object push operation from an OPP server.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_OPP_OBJECT_PULL_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="28"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_type</Name>
                </ItemLink>
                <Comment>Bluetooth object type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_name</Name>
                </ItemLink>
                <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_m_t</Name>
                </ItemLink>
                <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object mime t</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_length</Name>
                </ItemLink>
                <Comment>Bluetooth object length</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to inform about result of synchronization procedure which may have</Section>
                <Section>been started by SYNC server or SYNC client (also after termination of procedure)</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_SYNC_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="29"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Error cause</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This is used to request a password used for authentification at OBEX level,</Section>
                <Section>either for an authentification challenge or an authentification response</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_SYNC_AUTH_IND</Name>
                <PrimID Direction="DOWNLINK" Number="30"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>The SYNC server informs that the SYNC client requests to pull an object from SYNC server.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_SYNC_PULL_IND</Name>
                <PrimID Direction="DOWNLINK" Number="31"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_id_size</Name>
                </ItemLink>
                <Comment>Bluetooth object id size</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_id_loc</Name>
                </ItemLink>
                <Control>[BTI_SYNC_OBJECT_IDENTIFIER]</Control>
                <Comment>Bluetooth object id location</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>The SYNC server informs that the SYNC client requests to push an object to SYNC server.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_SYNC_PUSH_IND</Name>
                <PrimID Direction="DOWNLINK" Number="32"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_id_size</Name>
                </ItemLink>
                <Comment>Bluetooth object id size</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_id_loc</Name>
                </ItemLink>
                <Control>[BTI_SYNC_OBJECT_IDENTIFIER]</Control>
                <Comment>Bluetooth object id location</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>The SYNC server informs that the SYNC profile has received an entire object pushed</Section>
                <Section>by SYNC client.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_SYNC_PUSH_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="33"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>subtype</Name>
                </ItemLink>
                <Comment>Device subtype</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_type</Name>
                </ItemLink>
                <Comment>Bluetooth object type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_name</Name>
                </ItemLink>
                <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_m_t</Name>
                </ItemLink>
                <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control>
                <Comment>Bluetooth object mime t</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_length</Name>
                </ItemLink>
                <Comment>Bluetooth object length</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_id_size</Name>
                </ItemLink>
                <Comment>Bluetooth object id size</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>object_id_loc</Name>
                </ItemLink>
                <Control>[BTI_SYNC_OBJECT_IDENTIFIER]</Control>
                <Comment>Bluetooth object id location</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of profile SYNC Server</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_SYNC_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="34"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of profile OPP Server</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_OPP_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="35"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of profile OPP Client</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CL_OPP_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="36"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of profile HSG Client</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CL_HSG_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="37"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of profile HSG Server</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SRV_HSG_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="38"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of profile FAX</Section>
            </Description>
            <PrimDef>
                <Name>BTP_FAX_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="39"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of profile Dial up Network</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DUN_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="40"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: function calls and primitives of security and discovery managment</Section>
            </Description>
            <PrimDef>
                <Name>BTP_SEC_BROWS_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="41"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: common function calls and primitives</Section>
            </Description>
            <PrimDef>
                <Name>BTP_OTHER_TEST</Name>
                <PrimID Direction="DOWNLINK" Number="42"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>func_id</Name>
                </ItemLink>
                <Comment>function_identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Signals that the list of trusted (authorized) devices is full and that no more devices can be stored in this list.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_TRUSTED_DEV_LIST_FULL</Name>
                <PrimID Direction="DOWNLINK" Number="44"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>*No description found in source document*</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CHNG_LOCAL_NAME</Name>
                <PrimID Direction="DOWNLINK" Number="45"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>*No description found in source document*</Section>
            </Description>
            <PrimDef>
                <Name>BTP_READ_LOCAL_NAME</Name>
                <PrimID Direction="DOWNLINK" Number="46"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>Test Primitive: common function calls and primitives</Section>
            </Description>
            <PrimDef>
                <Name>BTP_REMOTE_DEV_INFO_RES</Name>
                <PrimID Direction="DOWNLINK" Number="47"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cod</Name>
                </ItemLink>
                <Control>[BTI_DEVICE_CLASS_LENGTH]</Control>
                <Comment>Bluetooth class of device</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_name</Name>
                </ItemLink>
                <Control>[BTI_BD_NAME_LENGTH]</Control>
                <Comment>Bluetooth device name</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>*No description found in source document*</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CHNG_CONNECTABLE_MODE</Name>
                <PrimID Direction="DOWNLINK" Number="48"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>mode</Name>
                </ItemLink>
                <Comment>mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>scan_interval</Name>
                </ItemLink>
                <Comment>Scan Interval</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>scan_window</Name>
                </ItemLink>
                <Comment>Scan Window</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>*No description found in source document*</Section>
            </Description>
            <PrimDef>
                <Name>BTP_CHNG_DISCOVERABLE_MODE</Name>
                <PrimID Direction="DOWNLINK" Number="49"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>mode</Name>
                </ItemLink>
                <Comment>mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>scan_interval</Name>
                </ItemLink>
                <Comment>Scan Interval</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>scan_window</Name>
                </ItemLink>
                <Comment>Scan Window</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>*No description found in source document*</Section>
            </Description>
            <PrimDef>
                <Name>BTP_READ_BD_ADDR</Name>
                <PrimID Direction="DOWNLINK" Number="50"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>PCA is a customer specific application. Derived from DUN profile</Section>
            </Description>
            <PrimDef>
                <Name>BTP_PCA_EVENT</Name>
                <PrimID Direction="DOWNLINK" Number="51"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>pca_event</Name>
                </ItemLink>
                <Comment>event</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>pca_gw_status</Name>
                </ItemLink>
                <Comment>gateway status</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>pca_link_status</Name>
                </ItemLink>
                <Comment>link status</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>pca_call_status</Name>
                </ItemLink>
                <Comment>call status</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>pca_hangup</Name>
                </ItemLink>
                <Comment>hangup</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>*No description found in source document*</Section>
            </Description>
            <PrimDef>
                <Name>BTP_PROFILE_CREATE_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="52"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device/Profile type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>*No description found in source document*</Section>
            </Description>
            <PrimDef>
                <Name>BTP_PROFILE_DELETE_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="53"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>success</Name>
                </ItemLink>
                <Comment>success</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device/Profile type</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This indicates connection from the remote headset device</Section>
            </Description>
            <PrimDef>
                <Name>BTP_HSG_HEADSET_CONNECTION_IND</Name>
                <PrimID Direction="DOWNLINK" Number="64"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>device</Name>
                </ItemLink>
                <Comment>Device type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>ind_id</Name>
                </ItemLink>
                <Comment>Indication identifier</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>bd_addr</Name>
                </ItemLink>
                <Control>[BTI_BD_ADDR_LENGTH]</Control>
                <Comment>Bluetooth device address</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This means remote headset sends AT command to us</Section>
            </Description>
            <PrimDef>
                <Name>BTP_HSG_SPECIFIC_CMD_RDY</Name>
                <PrimID Direction="DOWNLINK" Number="65"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>cmd</Name>
                </ItemLink>
                <Control>[BTI_HSG_SPECIFIC_CMD_MAX_LENGTH]</Control>
                <Comment>Headset special AT command</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>This event is received after we save default headset list to FFS</Section>
            </Description>
            <PrimDef>
                <Name>BTP_HSG_SAVE_LIST_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="66"/>
                <PrimUsage>
                    <Sender>BTI</Sender>
                    <Receiver>MMI</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>result</Name>
                </ItemLink>
                <Comment>Result</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>The BTP_DTI_REQ is used to connect or disconnect the DTI communication with the upper layer. It is indicated by the parameter dti_conn, if the upper layer wants to connect or disconnect. The same parameter is repeated in the corresponding BTP_DTI_CNF.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DTI_REQ</Name>
                <PrimID Direction="UPLINK" Number="14"/>
                <PrimUsage>
                    <Sender>CTL</Sender>
                    <Receiver>BTP</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>dti_conn</Name>
                </ItemLink>
                <Comment>DTI connect</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>entity_name</Name>
                </ItemLink>
                <Control>[BTI_ENTITY_NAME_LEN]</Control>
                <Comment>entity name</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>link_id</Name>
                </ItemLink>
                <Comment>link identifier</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>dti_direction</Name>
                </ItemLink>
                <Comment>DTI direction</Comment>
            </PrimItem>
            <History>
                <Date Day="3" Month="5" Year="2002"/>
                <Author>TVO</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>The BTP_DTI_CNF is used to acknowledge a previous BTP_DTI_REQ. The parameter value of dti_conn is always the same as in the corresponding BTP_DTI_REQ. The parameter link_id can be used to identify the DTI link.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DTI_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="54"/>
                <PrimUsage>
                    <Sender>BTP</Sender>
                    <Receiver>CTL</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>dti_conn</Name>
                </ItemLink>
                <Comment>DTI connect</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>link_id</Name>
                </ItemLink>
                <Comment>link identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="3" Month="5" Year="2002"/>
                <Author>TVO</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <Section>The BTP_DTI_IND is used by BTP to pass the control of the DTI back to the upper layer. The parameter link_id can be used to identify the DTI link.</Section>
            </Description>
            <PrimDef>
                <Name>BTP_DTI_IND</Name>
                <PrimID Direction="DOWNLINK" Number="55"/>
                <PrimUsage>
                    <Sender>BTP</Sender>
                    <Receiver>CTL</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>dti_conn</Name>
                </ItemLink>
                <Comment>DTI connect</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">btp</DocName>
                    <Name>link_id</Name>
                </ItemLink>
                <Comment>link identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="3" Month="5" Year="2002"/>
                <Author>TVO</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
    </PrimitivesSection>
    <PrimBasicElementsSection>
        <Description>
            <Section>Parameters shall be part of the primitives described above and if applied the parameters shall contain the values specified here.</Section>
        </Description>
        <PrimBasicElem>
            <Description>
                <Section>This is used for giving results.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>result</Name>
                <Type>U8</Type>
                <Comment>Result</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_result</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The type of device/profile id</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>device</Name>
                <Type>U8</Type>
                <Comment>device type</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_device</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The subtype of device</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>subtype</Name>
                <Type>U8</Type>
                <Comment>subtype</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_subtype</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The Bluetooth device address</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>bd_addr</Name>
                <Type>U8</Type>
                <Comment>Bluetooth device address</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The Bluetooth device name</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>bd_name</Name>
                <Type>U8</Type>
                <Comment>Bluetooth device name</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the cause of an error.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>cause</Name>
                <Type>U8</Type>
                <Comment>Error cause</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the confirmation identifier</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>cnf_id</Name>
                <Type>U8</Type>
                <Comment>Confirmation identifier</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the indication identifier</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>ind_id</Name>
                <Type>U8</Type>
                <Comment>Indication identifier</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the indication data</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>ind_data</Name>
                <Type>U8</Type>
                <Comment>Indication data</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>Current sent signal (only for test purposes)</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>signal</Name>
                <Type>U8</Type>
                <Comment>signal</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_signal</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the data length, aka number of bytes</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>len</Name>
                <Type>U8</Type>
                <Comment>Data length</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The Bluetooth service name</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>serv_name</Name>
                <Type>U8</Type>
                <Comment>Bluetooth device name</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The Bluetooth services bitmap</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>services</Name>
                <Type>U32</Type>
                <Comment>Bluetooth services</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This is used for giving results.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>pair_result</Name>
                <Type>U8</Type>
                <Comment>Pairing Result</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_pair_result</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This is used for giving status of data call (profile dun and fax).</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>call_status</Name>
                <Type>U8</Type>
                <Comment>state of data call</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_call_status</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This is used for giving status of data link (profile dun and fax).</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>link_status</Name>
                <Type>U8</Type>
                <Comment>state of data link</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_link_status</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>In this 32 bits unsigned integer each bit represents a service</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>authorization_mask_serv</Name>
                <Type>U32</Type>
                <Comment>service identifier</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the type of connection</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>incom_conn</Name>
                <Type>U8</Type>
                <Comment>incoming  connection</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The Bluetooth application name</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>appli_name</Name>
                <Type>U8</Type>
                <Comment>Bluetooth appli name</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>Port number for BT data transaction, only used for simulation</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>port_nb</Name>
                <Type>U32</Type>
                <Comment>Port number</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the state of the audio connection</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>audio_state</Name>
                <Type>U8</Type>
                <Comment>Audio connection state</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_audio_state</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the mode of profile OPP in server mode</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>opp_mode</Name>
                <Type>U8</Type>
                <Comment>status of OPP server</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_opp_mode</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains type of storing of objects for OPP/SYNC</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>object_type</Name>
                <Type>U8</Type>
                <Comment>object type</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_object_type</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the name of a OPP/SYNC object</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>object_name</Name>
                <Type>U8</Type>
                <Comment>Bluetooth object name</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the type of MIME of OPP/SYNC object</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>object_m_t</Name>
                <Type>U8</Type>
                <Comment>Bluetooth object MIME type</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This contains the length of a OPP/SYNC object</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>object_length</Name>
                <Type>U32</Type>
                <Comment>object length</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>common mode of the SYNC server</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>sync_serv_mode</Name>
                <Type>U8</Type>
                <Comment>SYNC server mode</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_sync_serv_mode</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>initiation authentication mode of the SYNC server</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>sync_init_auth</Name>
                <Type>U8</Type>
                <Comment>SYNC initiation authentication</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_sync_init_auth</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>size of object ID</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>object_id_size</Name>
                <Type>U16</Type>
                <Comment>size of object identifier</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>location of object ID</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>object_id_loc</Name>
                <Type>U8</Type>
                <Comment>location of sync object</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>function identifier for window32 test</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>func_id</Name>
                <Type>U8</Type>
                <Comment>function identifier</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>source identifier for connection indication of profile HSG</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>src_id</Name>
                <Type>U8</Type>
                <Comment>soure identifier</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_src_id</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>Number of available services on device</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>num_services</Name>
                <Type>U32</Type>
                <Comment>number of services</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The Bluetooth class of device</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>cod</Name>
                <Type>U8</Type>
                <Comment>Bluetooth class of device</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>Signals Success or Failure of BTCTRL operation</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>success</Name>
                <Type>U8</Type>
                <Comment>BTCTRL success</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter indicates the time interval from starting the last inquiry/paging until the next one.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>scan_interval</Name>
                <Type>U32</Type>
                <Comment>Scan Interval</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter indicates the amount of time for the last inquiry/paging.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>scan_window</Name>
                <Type>U32</Type>
                <Comment>Scan Window</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter indicates current discoverable or connectable mode (depending on primitive).</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>mode</Name>
                <Type>U32</Type>
                <Comment>Conn/Disc Mode</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter describes whether BTP_INIT_PROFILE_CNF was sent for enabling or for initialisation</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>action</Name>
                <Type>U8</Type>
                <Comment>Action</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_action</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter indicates the current status of PCA gateway</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>pca_gw_status</Name>
                <Type>U32</Type>
                <Comment>gw status</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter indicates current call status of PCA</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>pca_call_status</Name>
                <Type>U32</Type>
                <Comment>call status</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter indicates current link status of PCA</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>pca_link_status</Name>
                <Type>U32</Type>
                <Comment>link status</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter indicates current hangup state of PCA</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>pca_hangup</Name>
                <Type>U32</Type>
                <Comment>hangup state</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>Describes the PCA event received. Needed to map multiple PCA results in on primitve</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>pca_event</Name>
                <Type>U8</Type>
                <Comment>event</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_pca_event</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The headset special AT command</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>cmd</Name>
                <Type>S8</Type>
                <Comment>Headset special AT command</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>The parameter defines, if BTP shall be connected via the DTI to the upper layer or not.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>dti_conn</Name>
                <Type>U8</Type>
                <Comment>DTI connect</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_dti_conn</Name>
            </ValuesLink>
            <History>
                <Date Day="3" Month="5" Year="2002"/>
                <Author>TVO</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter contains a string (zero terminated) which is the name of a neighbour entity, i.e. the entity handling a higher or lower protocol. The parameter is used to open the communication channel to this entity.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>entity_name</Name>
                <Type>U8</Type>
                <Comment>name of an neighbour entity</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="3" Month="5" Year="2002"/>
                <Author>TVO</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter is used to identify the affected channel in case of multiplexing.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>link_id</Name>
                <Type>U32</Type>
                <Comment>Link identifier</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_link_id</Name>
            </ValuesLink>
            <History>
                <Date Day="3" Month="5" Year="2002"/>
                <Author>TVO</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <Section>This parameter controls if BTI uses the DTI in the normal way or if the primitives are inverted. In the normal way data are sent as DTI_DATA_IND and received as DTI_DATA_REQ. In the inverted mode data are send as DTI_DATA_REQ and received as DTI_DATA_IND.</Section>
            </Description>
            <PrimBasicElemDef>
                <Name>dti_direction</Name>
                <Type>U8</Type>
                <Comment>DTI direction</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">btp</DocName>
                <Name>VAL_dti_direction</Name>
            </ValuesLink>
            <History>
                <Date Day="3" Month="5" Year="2002"/>
                <Author>TVO</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
    </PrimBasicElementsSection>
    <ValuesSection>
        <Description>
            <Section>This section contains all sets of values that are defined for the BTP SAP</Section>
        </Description>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_result</Name>
                <Comment>values for result</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>BTI_OK</Alias>
                <Comment>Successful</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_NOK</Alias>
                <Comment>Not successful</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_device</Name>
                <Comment>values for device</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_HEADSET</Alias>
                <Comment>Headset profile/device</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_DIAL_UP</Alias>
                <Comment>Dial Up profile/device</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>BTI_SDP</Alias>
                <Comment>Service discovery profile</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">04</Value>
                <Alias>BTI_FAX_GW</Alias>
                <Comment>Fax profile/device</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">05</Value>
                <Alias>BTI_OPP</Alias>
                <Comment>Object P/P profile/device</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">06</Value>
                <Alias>BTI_SYNC</Alias>
                <Comment>Synchronization profile server</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">07</Value>
                <Alias>BTI_SYNC_CMD</Alias>
                <Comment>Synchronization profile/device supportes SYNC commands</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">08</Value>
                <Alias>BTI_PCA_GW</Alias>
                <Comment>PCA Gateway</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_subtype</Name>
                <Comment>values for subtype</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_CLIENT</Alias>
                <Comment>client mode</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_SERVER</Alias>
                <Comment>server mode</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>BTI_NO_SUBTYP</Alias>
                <Comment>no subtype</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_signal</Name>
                <Comment>values for signal</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>BTI_SIGNAL_OFF</Alias>
                <Comment>See description above</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_SIGNAL_RING_ON</Alias>
                <Comment>See description above</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_SIGNAL_DCD_ON</Alias>
                <Comment>See description above</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_pair_result</Name>
                <Comment>values for pair_result</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>BTI_PAIRING_SUCESSFULL</Alias>
                <Comment>Successful</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_PAIRING_FAILURE</Alias>
                <Comment>Not successful</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_call_status</Name>
                <Comment>values for call_status</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>BTI_DUN_CALL_IN_PRO</Alias>
                <Comment>DUN Data call in progress</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_DUN_CALL_ESTABLISHED</Alias>
                <Comment>DUN Data call established</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_DUN_CALL_PAUSED</Alias>
                <Comment>DUN Data call paused</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>BTI_DUN_CALL_RESUMED</Alias>
                <Comment>DUN Data call resumed</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">04</Value>
                <Alias>BTI_DUN_CALL_HANGUP_IN_PR</Alias>
                <Comment>DUN Hang_up in progress</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">05</Value>
                <Alias>BTI_DUN_CALL_RELEASED</Alias>
                <Comment>DUN Data call released</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">06</Value>
                <Alias>BTI_FAX_CALL_IN_PRO</Alias>
                <Comment>FAX Data call in progress</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">07</Value>
                <Alias>BTI_FAX_CALL_ESTABLISHED</Alias>
                <Comment>FAX Data call established</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">08</Value>
                <Alias>BTI_FAX_CALL_HANGUP_IN_PR</Alias>
                <Comment>FAX Hang_up in progress</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">09</Value>
                <Alias>BTI_FAX_CALL_RELEASED</Alias>
                <Comment>FAX Data call released</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_link_status</Name>
                <Comment>values for link_status</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>BTI_DUN_NOT_CONNECTED</Alias>
                <Comment>no DUN -DT connected to DUN GW</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_DUN_CONNECTED</Alias>
                <Comment>DUN -DT connected to DUN GW</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_FAX_NOT_CONNECTED</Alias>
                <Comment>no FAX -DT connected to FAX GW</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>BTI_FAX_CONNECTED</Alias>
                <Comment>FAX -DT connected to FAX GW</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_audio_state</Name>
                <Comment>values for audio_state</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_CONNECTION_ESTABLISHED</Alias>
                <Comment>See description above</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_CONNECTION_RELEASED</Alias>
                <Comment>See description above</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_opp_mode</Name>
                <Comment>values for opp_mode</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>BTI_NO_OPP_MODE</Alias>
                <Comment>no profile OPP</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_OPP_SILENT_FILE_MODE</Alias>
                <Comment>store received object as file without alerting of user</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_OPP_EVENT_FILE_MODE</Alias>
                <Comment>store received object as file with information of user</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>BTI_OPP_EVENT_BUFFER_MODE</Alias>
                <Comment>ask for a buffer for store objects</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_object_type</Name>
                <Comment>values for object_type</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_TYPE_PATH</Alias>
                <Comment>path for object in file system</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_TYPE_BUFFER</Alias>
                <Comment>request buffer for store of object</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_sync_serv_mode</Name>
                <Comment>values for sync_serv_mode</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_GEN_SYNC</Alias>
                <Comment>general sync mode of SYNC server</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_INIT_SYNC</Alias>
                <Comment>initialization sync mode</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>BTI_NO_SYNC_MODE</Alias>
                <Comment>no sync mode</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_sync_init_auth</Name>
                <Comment>values for sync_init_auth</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_INITIATE_AUTHENTICATION</Alias>
                <Comment>server initiates authentication</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_NO_INITIATE_AUTHENTICATION</Alias>
                <Comment>server initiates no authentication</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>BTI_NO_SYNC_AUTHENTICATION_MODE</Alias>
                <Comment>no authentication SYNC mode</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_src_id</Name>
                <Comment>values for src_id</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>REM_HEADSET</Alias>
                <Comment>initiate by remote headset</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>GSM_NETWORK</Alias>
                <Comment>initiate by gsm network</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>NO_PROFILE_HSG</Alias>
                <Comment>only meaning for profile hsg</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_action</Name>
                <Comment>values for action</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>BTI_PROFILE_INIT</Alias>
                <Comment>Initialize a profile</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_PROFILE_ENABLE</Alias>
                <Comment>Enable a profile</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_pca_event</Name>
                <Comment>values for pca_event</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>BTI_PCA_GW_STATUS_CFM</Alias>
                <Comment>pca gateway status result</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>BTI_PCA_GW_LINK_MONITORING</Alias>
                <Comment>pca link monitoring result</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">03</Value>
                <Alias>BTI_PCA_GW_CALL_MONITORING</Alias>
                <Comment>pca call monitoring result</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">04</Value>
                <Alias>BTI_PCA_GW_HANGUP_CFM</Alias>
                <Comment>pca hangup state</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_dti_conn</Name>
                <Comment>values for dti_conn</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>BTI_CONNECT_DTI</Alias>
                <Comment>Connect DTI to BTI</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>BTI_DISCONNECT_DTI</Alias>
                <Comment>Disconnect DTI from BTI</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>BTI_ERROR_DTI</Alias>
                <Comment>Error, DTI disconnected</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_link_id</Name>
                <Comment>values for link_id</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>BTP_LINK_ID_DEFAULT</Alias>
                <Comment>Default link id</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
            </Description>
            <ValuesDef>
                <Name>VAL_dti_direction</Name>
                <Comment>values for dti_direction</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>BTI_DTI_NORMAL</Alias>
                <Comment>DTI used normally</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>BTI_DTI_INVERTED</Alias>
                <Comment>DTI is inverted</Comment>
            </ValuesItem>
            <History>
                <Date Day="4" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
    </ValuesSection>
</SAP>