FreeCalypso > hg > tcs211-l1-reconst
view gpf/BIN/mkalltc.bat @ 182:6a71281f0d82
l1audio_init.c fully reconstructed, matches TCS211 object
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Wed, 08 Jun 2016 00:41:23 +0000 |
parents | 509db1a7b7b8 |
children |
line wrap: on
line source
@echo off setlocal rem --------------------------------------------------------------------------- rem Project : rem Modul : mkalltc.bat rem --------------------------------------------------------------------------- rem Copyright 2002 Texas Instruments Berlin, AG rem All rights reserved. rem rem This file is confidential and a trade secret of Texas rem Instruments Berlin, AG rem The receipt of or possession of this file does not convey rem any rights to reproduce or disclose its contents or to rem manufacture, use, or sell anything it may describe, in rem whole, or in part, without the specific written consent of rem Texas Instruments Berlin, AG. rem --------------------------------------------------------------------------- rem Purpose : Generate all test cases for a given test specification rem --------------------------------------------------------------------------- set tc_exitcode=0 loadbtm on @pushd @if x%_4ver% == x goto Need4NT @rem Check %PROST @iff x%PROST == x then @echo Which Protocol Stack shall be tested? @echo set the environment variable PROST to the name of the stack. @echo e.g. set PROST=GSM or set PROST=WARP will work goto error @endiff @rem Check for gnumake and grep set grep=%GPF%\tools\bin\grep.exe iff NOT exist %grep% then echo You need %grep% to generate test cases goto error endiff set gnumake=%GPF%\tools\bin\gnumake.exe iff NOT exist %gnumake% then echo You need %gnumake% to generate test cases goto error endiff set sed=%GPF%\tools\bin\sed.exe iff NOT exist %sed% then echo You need %sed% to generate tests goto error endiff rem set gawk but check it later only if it is needed set gawk=%GPF%\tools\bin\gawk.exe @set TC_COMPILE_ONLY=0 @set TC_FINALTESTS=0 iff "x%TDSCHECK_ENABLED" == "x" then set enable_check=0 else set enable_check=1 endiff set tc_firsttc= set tc_lasttc= set tc_delete_olds=1 set tc_cons_output=0 set tc_bnam= set tc_furtherincludes= set tc_gen_only=0 set tc_range_supplied=0 set tc_testconfig= set tc_testdlldir= set tc_testenv=new set tc_gendir=%GPF%\util\tap\gen set tc_tap_errfunc=tap_get_exitcode set tc_testpref= set tc_allin1=0 set tc_genc=0 set tc_tdc=0 :check_options @rem Check Parameters @if "x%1" == "x" goto How2Use iff "%1" == "-to" then iff %tc_compile_only% == 1 .OR. %TC_FINALTESTS% == 1 then echo Use of "-to" ignored because "-co" or "-f" was set else set tc_gen_only=1 endiff shift 1 goto check_options elseiff "%1" == "-co" then iff %tc_gen_only% == 1 then echo Use of "-co" ignored because "-to" was set else set TC_COMPILE_ONLY=1 endiff shift 1 goto check_options elseiff "%1" == "-eut" then set tc_testconfig=EUT=%@UPPER[%2] set tc_tdcenti=%@LOWER[%2] shift 2 goto check_options elseiff "%1" == "-f" then rem Check for several tools in %PATH set uniq=%GPF%\tools\bin\uniq.exe set sort=%GPF%\tools\bin\sort.exe iff NOT exist %uniq% then echo You need %uniq% to generate final tests goto error endiff iff NOT exist %sort% then echo You need %sort% to generate final tests goto error endiff iff NOT exist %gawk% then echo You need %gawk% to generate final tests goto error endiff iff %tc_gen_only% == 1 then echo Use of "-f" ignored because "-to" was set else set TC_FINALTESTS=1 endiff shift 1 goto check_options elseiff "%1" == "-tty" then set tc_cons_output=1 shift 1 goto check_options elseiff "%1" == "-oe" then set tc_tap_errfunc=!tcd_errorOccured set tc_gendir=%GPF%\tap set tc_testenv=old shift 1 goto check_options elseiff "%1" == "-oed" then set tc_tap_errfunc=!tcd_errorOccured set tc_gendir=%GPF%\tap set tc_testenv=old set tc_testpref=oe_ shift 1 goto check_options elseiff "%1" == "-debug" then echo on shift 1 goto check_options elseiff "%1" == "-k" then set tc_delete_olds=0 shift 1 goto check_options elseiff "%1" == "-tc" then if "x%2" == "x" (echo Missing name of testcases for "-tc" & goto How2Use) set tc_bnam=%2 shift 2 goto check_options elseiff "%1" == "-r" then if "x%2" == "x" (echo Missing range for "-r" & goto How2Use) set tc_dash=%@INDEX[%2,-] if %tc_dash == -1 (echo Invalid range "%2" & goto How2Use) set tc_firsttc=%@INSTR[0,%tc_dash,%2] set tc_lasttc=%@SUBSTR[%2,%@eval[1+%tc_dash%]] set tc_range_supplied=1 shift 2 goto check_options elseiff "%1" == "-chk" then rem Call TDSCheck after generating tds files set enable_check=1 shift 1 goto check_options elseiff "%1" == "-td" then if "x%2" == "x" (echo Missing testdll directory for "-td" & goto How2Use) set tc_testdlldir=%2 shift 2 goto check_options elseiff "%1" == "-genc" then set tc_genc=1 set tc_allin1=1 shift 1 goto check_options elseiff "%1" == "-1" then set tc_allin1=1 shift 1 goto check_options elseiff "%1" == "-tdc" then set tc_tdc=1 shift 1 goto check_options elseiff "%1" == "-i" then if "x%2" == "x" (echo Miissing include directory for "-i" & goto How2Use) iff "%@INSTR[0,1,%2]" == "." .OR. "%@INSTR[0,1,%2]" == "/" .OR. "%@INSTR[0,1,%2]" == "\" .OR. "%@INSTR[1,1,%2]" == ":" then set tc_furtherincludes=%tc_furtherincludes% -I %2 else set tc_furtherincludes=%tc_furtherincludes% -I %TDSDIR%/%2 endiff shift 2 goto check_options endiff @if %#% GT 2 goto How2Use if "%@INSTR[0,1,%1]" == "-" goto unknown_option iff %tc_allin1% == 1 then set decl_extr=%GPF%\BIN\decl-extr.exe iff NOT exist %decl_extr% then echo You need %decl_extr% to generate test cases goto error endiff endiff iff %tc_tdc% == 1 then set msdev=%@search[msdev] iff "x%msdev%" == "x" then echo You need MSDEV in your Path to generate TDC test cases goto error endiff endiff iff "x%2" != "x" then iff "x%tc_testconfig" != "x" then echo Warning: parameter "%2" ignored, because -eut was set else set tc_testconfig=%@UPPER[%2] endiff else if "x%tc_testconfig" == "x" set tc_testconfig=%@UPPER[%1] endiff set ENTI=%@LOWER[%1] if "x%tc_bnam%" == "x" set tc_bnam=%ENTI% if "x%tc_tdcenti%" == "x" set tc_tdcenti=%ENTI% @rem Stack-Specifics iff "x%TCDIR%" == "x" then iff "%PROST" == "WARP" .OR. "%PROST%" == "g23net" then set TCDIR=%BINDIR% else set TCDIR=%TESTROOT%\%SIDE%\TEST endiff endiff iff %tc_tdc% == 1 then iff %PROST% == generic then set TDCSRCDIR=%TESTROOT%\spec\test\%ENTI% else iff exist %TESTROOT%\ms\src\%tc_tdcenti%\%tc_bnam%_test then set TDCSRCDIR=%TESTROOT%\ms\src\%tc_tdcenti%\%tc_bnam%_test elseiff exist %TESTROOT%\ms\src\%tc_tdcenti%\test_%tc_bnam% then set TDCSRCDIR=%TESTROOT%\ms\src\%tc_tdcenti%\test_%tc_bnam% else echo No test case directory echo Neither %TESTROOT%\ms\src\%tc_tdcenti%\%tc_bnam%_test echo ^s^s^s^snor %TESTROOT%\ms\src\%tc_tdcenti%\test_%tc_bnam% exist goto error endiff endiff endiff %TESTDRIVE% rem check if test case directory is substructured iff "x%tc_testdlldir" =="x" then iff "x%TCNOTSUBSTRUCT" == "x" then set TESTDLLDIR=%TCDIR%\%tc_testpref%%ENTI%_test else set TESTDLLDIR=%TCDIR% endiff else iff "%@INSTR[0,1,%tc_testdlldir%]" == "." .OR. "%@INSTR[0,1,%tc_testdlldir%]" == "/" .OR. "%@INSTR[0,1,%tc_testdlldir%]" == "\" .OR. "%@INSTR[1,1,%tc_testdlldir%]" == ":" then set TESTDLLDIR=%tc_testdlldir% else set TESTDLLDIR=%TCDIR%\%tc_testdlldir% endiff endiff iff NOT exist %TESTDLLDIR% .AND. %tc_tdc% != 1 then echo "Creating test directory %TESTDLLDIR% ..." mkdir /S %TESTDLLDIR% endiff rem check if configstring is like EUT=ACI or like MFW set EQINP2=%@WORDS["=",%tc_testconfig] @iff %EQINP2% GT 1 then set TSTDLLCONF="%tc_testconfig%" @else set TSTDLLCONF="CONFDLL=%tc_testconfig%" @endiff iff %tc_tdc% == 1 then set tcerr=%TDCSRCDIR%\%ENTI%.err iff exist %TDCSRCDIR%\makefile then echo Building Testlib with %TDCSRCDIR%\makefile call gnumake > %tcerr% else iff exist %TDCSRCDIR%\%ENTI%_test.dsp then set msdevfile=%TDCSRCDIR%\%ENTI%_test.dsp elseiff exist %TDCSRCDIR%\%ENTI%_test.dsw then set msdevfile=%TDCSRCDIR%\%ENTI%_test.dsw elseiff exist %TDCSRCDIR%\test_%ENTI%.dsp then set msdevfile=%TDCSRCDIR%\test_%ENTI%.dsp elseiff exist %TDCSRCDIR%\test_%ENTI%.dsw then set msdevfile=%TDCSRCDIR%\test_%ENTI%.dsw else set msdevfile=_not_found_ endiff iff %msdevfile% == _not_found_ then echo No Project/Workspace file %ENTI%_test found in %TDCSRCDIR% goto error endiff echo Building Testlib with %msdevfile% call msdev.exe %msdevfile% /MAKE "%@NAME[%msdevfile%] - Win32 Debug" /CLEAN > %tcerr% iff %? == 0 then call msdev.exe %msdevfile% /MAKE "%@NAME[%msdevfile%] - Win32 Debug" /REBUILD >> %tcerr% endiff endiff iff %? == 0 then echo ...done. if exist %tcerr% del /q %tcerr% else echo See errors %tcerr & goto end endiff goto end else set tcerr=%TDSDIR%\%ENTI%\%ENTI%.err endiff @if %tc_genc == 1 goto gen_c @if %TC_COMPILE_ONLY == 1 goto compile_only @if NOT exist %TSTDOCDIR%\%ENTI%.doc goto NoDoc @rem Check for tdsgen set tdsgen=%GPF%\BIN\tdsGen.exe% iff NOT exist %tdsgen% then echo You need %tdsgen% to generate test cases goto error @endiff rem Check for doc2txt set doc2txt=%GPF%\tools\bin\Doc2txt.exe iff NOT exist %doc2txt% then echo You need %doc2txt% to generate test cases goto error endiff set doc2txt_opts=-O -w -f wdFormatTextLineBreaks rem Check for tdscheck.exe iff %enable_check% == 1 then set tdscheck=%GPF%\BIN\tdscheck.exe iff NOT EXIST %tdscheck% then echo You need %tdscheck% to check your tds files goto error endiff endiff rem check if tds directory exists @iff NOT exist %TDSDIR%\%ENTI% then @echo "Creating test directory %TDSDIR%\%ENTI% ..." @mkdir /S %TDSDIR%\%ENTI% @endiff @if exist %TDSDIR%\%ENTI%\*.tds del /q %TDSDIR%\%ENTI%\*.tds %doc2txt% %doc2txt_opts% %TSTDOCDIR%\%ENTI%.doc rem hack for office 2000 where a blank is inserted after a backslash-newline move /q %TSTDOCDIR%\%ENTI%.txt %TSTDOCDIR%\%ENTI%.txt_ %sed% -e "s/\\ $/\\/" %TSTDOCDIR%\%ENTI%.txt_ > %TSTDOCDIR%\%ENTI%.txt del /q %TSTDOCDIR%\%ENTI%.txt_ > nul rem end of hack %tdsgen% %TCDIR% %ENTI% %TSTDOCDIR% %TDSDIR%\%ENTI% if %tc_cons_output% == 1 type %tcerr% if errorlevel GT 0 goto tdsgenerr gosub gen_suites @iff %enable_check% == 1 then %tdscheck% %TDSDIR%\%ENTI% %ENTI% @if errorlevel GT 1 goto tapcheckerrors @endiff if %tc_gen_only == 1 goto end :gen_c :compile_only @if NOT exist %TDSDIR%\%ENTI%\*.tds goto NoTds cd %TDSDIR%\%ENTI% set tc_exmp_=%@FINDFIRST[*.tds] set tc_exmp=%@NAME[%tc_exmp_] set tc_exmp_=%@FINDCLOSE[*.tds] iff %tc_testenv% == new then %grep% SCRIPT_BEGIN %tc_exmp%.tds > nul iff %? == 0 then set tc_testlanguage=TCSL else set tc_testlanguage=TDS endiff endiff if %tc_allin1% == 0 goto not_allin1 @if %TC_COMPILE_ONLY == 1 goto compile_c echo #include "%ENTI%.h" > %ENTI%.c @FOR %tcase IN (%TDSDIR%\%ENTI%\*.tds) do ( %sed% -e 1,2d -e "s/TESTCASE (\([a-zA-Z0-9_]*\))/EXPORT UBYTE \1(){&/" -e "s/ENDCASE/&;return (%tc_tap_errfunc%());}/" -e "s/#include \"\([a-zA-Z0-9_]*\).[tT][dD][sS]\"/\1();/" %tcase% >> %ENTI%.c ) %grep% EXPORT %ENTI%.c | sed s/{.*/;/ > %ENTI%.h %decl_extr% %ENTI%.def %ENTI%.decl %grep% #include %ENTI%.def >> %ENTI%.decl :compile_c cdd %tc_gendir% call gnumake -f testdll.mk OUTDLL=%TESTDLLDIR%/%ENTI%.DLL %TSTDLLCONF% ALL_IN_ONE=1 TSTDOCNAM=%ENTI% TC_FURTHERINCLUDES="%tc_furtherincludes" TC_TESTLANGUAGE=%tc_testlanguage% all >%tcerr% iff %? == 0 then echo Generated Testlib %TESTDLLDIR%\%ENTI%.DLL. if exist %tcerr% del /q %tcerr% else echo See %tcerr & goto end endiff goto end :not_allin1 rem Check ranges iff %tc_range_supplied% == 1 then set tc_ords=%@SUBSTR[%tc_exmp,%@LEN[%tc_bnam%]] set tc_len=%@LEN[%tc_ords] if %@NUMERIC[%tc_ords] == 0 set tc_len=%@DEC[%tc_len%] iff x%tc_firsttc == x then iff %tc_len% == 4 then set tc_firsttc=0000 else set tc_firsttc=000 endiff else set tc_len_=%@LEN[%tc_firsttc] if %@NUMERIC[%tc_firsttc] == 0 set tc_len_=%@DEC[%tc_len_%] if %tc_len != %tc_len_ echo Warning: your range "%tc_firsttc" is ambigious endiff iff x%tc_lasttc == x then iff %tc_len% == 4 then set tc_lasttc=9999Z else set tc_lasttc=999Z endiff else set tc_len_=%@LEN[%tc_lasttc] if %@NUMERIC[%tc_lasttc] == 0 set tc_len_=%@DEC[%tc_len_%] if %tc_len != %tc_len_ echo Warning: your range "%tc_lasttc" is ambigious endiff endiff rem Deleting all old .err-Files @if exist %TDSDIR%\%ENTI%\*.err del /q %TDSDIR%\%ENTI%\%ENTI%*.err iff %tc_delete_olds == 1 then iff exist %TESTDLLDIR%\%tc_bnam%*.dll .OR. exist %TESTDLLDIR%\sui\%tc_bnam%*.dll then echo Deleting all old .dll-Files if exist %TESTDLLDIR%\%tc_bnam%*.dll del /q %TESTDLLDIR%\%tc_bnam%*.dll if exist %TESTDLLDIR%\sui\%tc_bnam%*.dll del /q %TESTDLLDIR%\sui\%tc_bnam%*.dll endiff endiff iff %TC_FINALTESTS% == 1 then set tc_nonfdummy=%TDSDIR%\%ENTI%\%ENTI%_nonfdummy.txt if exist %tc_nonfdummy% del /q %tc_nonfdummy %grep% -hi "#include.*tds" %TDSDIR%\%ENTI%\*.tds | %sed% -e "s/#include *[\"^<]\([a-zA-Z0-9]*\).*[\"^>]/\1.td_/" > %tc_nonfdummy% iff %tc_testlanguage% == TCSL then if exist %ENTI%.sui echo Warning: option -f in combination with Suites and test language TCSL cannot always work properly else %grep% -Li "#include.*tds" %TDSDIR%\%ENTI%\*.tds | %sed% -e "s/.*\\//" -e "s/tds/td_/" >> %tc_nonfdummy endiff %sort% < %tc_nonfdummy% | %uniq% | %gawk% -- "{ print $1 > $1 }" iff exist %ENTI%.sui then %sort% < %tc_nonfdummy% | %uniq% | %sed% -e "s/\(.*\)\.td_/\/\1\/{ print \"\1\"}/" > %ENTI%.awk %gawk% -f %ENTI%.awk %ENTI%.sui | %sort% | %uniq% | %sed% -e "s/.*/&.td__/" | %gawk% -- "{ print $1 > $1}" del /q %ENTI%.awk if NOT isdir %TESTDLLDIR%\sui .AND. exist *.td__ mkdir %TESTDLLDIR%\sui endiff del /q %tc_nonfdummy endiff cdd %tc_gendir% @echo Compiling testcases set tc_error_occurred=0 FOR %tcase IN (%TDSDIR%\%ENTI%\*.tds) do ( if %tc_error_occurred == 0 gosub mk_test ) goto clean_up :mk_test set tcname=%@NAME[%tcase] iff %tc_range_supplied% == 1 then set tc_ords=%@SUBSTR[%tcname,%@LEN[%tc_bnam%]] set tc_namparam=%tc_bnam%%tc_ords% iff %tc_ords% GE %tc_firsttc% .AND. %tc_ords% LE %tc_lasttc% then set tc_inrange=1 else set tc_inrange=0 endiff else set tc_namparam=%tcname% set tc_inrange=1 endiff iff %tc_inrange% == 1 then iff EXIST %TDSDIR%\%ENTI%\%tcname%.td__ then set OUTDLL=%TESTDLLDIR%/sui/%tcname%.dll elseiff NOT EXIST %TDSDIR%\%ENTI%\%tcname%.td_ then set OUTDLL=%TESTDLLDIR%/%tcname%.dll else set OUTDLL= endiff iff "x%OUTDLL" != "x" then %gnumake% -f testdll.mk OUTDLL=%OUTDLL% TSTDOCNAM=%ENTI% TC_NAME=%tc_namparam% %TSTDLLCONF% TC_FURTHERINCLUDES="%tc_furtherincludes" TC_TESTLANGUAGE=%tc_testlanguage% all >%tcerr% iff %tc_cons_output% == 1 then if %? != 0 set tc_error_occurred=1 type %tcerr% else iff %? == 0 then echo %@NAME[%tcase] done. else echo Error (%tcname%): See %tcerr & set tc_error_occurred=1 endiff endiff endiff return :gen_suites %grep% Suites %TSTDOCDIR%\%ENTI%.txt > nul iff %? == 0 then set gensuites=%GPF%\BIN\gensuites.awk iff NOT EXIST %gensuites% .OR. NOT EXIST %gawk% then echo Warning: You need %gensuites% and %gawk% to generate suites return endiff %gawk% -f %gensuites% %TSTDOCDIR%\%ENTI%.txt | tee %TDSDIR%\%ENTI%\%ENTI%.sui > %TESTDLLDIR%\%ENTI%.sui echo Generated %TDSDIR%\%ENTI%\%ENTI%.sui echo ^s^s^s^s^s^sand %TESTDLLDIR%\%ENTI%.sui else echo No Suites endiff return :clean_up iff %tc_error_occurred% == 0 then echo Generated Test Cases are in %TESTDLLDIR% if exist %tcerr% del /q %tcerr% endiff if exist %TDSDIR%\%ENTI%\*.td_ del /q %TDSDIR%\%ENTI%\*.td_ if exist %TDSDIR%\%ENTI%\*.td__ del /q %TDSDIR%\%ENTI%\*.td__ goto end :NoDoc @echo "%TSTDOCDIR%\%ENTI%.doc does not exist" goto error :NoTds @echo "No tds-Files in %TDSDIR%\%ENTI%" goto error :tdsgenerr iff %?%==2 @echo Parse error in test case document. See %TDSDIR%\%ENTI%\%ENTI%.err iff %?%==3 @echo Error while opening file during generation of test cases goto error :tapcheckerrors @echo "tapcheck has found problems in %TSTDOCDIR%\%ENTI%.doc" @echo "inspect %TDSDIR%\%ENTI%\%ENTI%.chk" goto error :still_open @echo "%TSTDOCDIR%\%ENTI%.doc is still open" goto error :Need4NT @echo "Error: 4DOS or 4NT is needed goto error :unknown_option echo Unknown Option: %1 :How2Use text MkAllTc : Create test cases Usage : MkAllTc [-chk] [-co] [-to] [-f] [-r [<first>]-[<last>]] [-k] [-tty] [-oe] [-oed] [-i <incdir>] [-tc <tcbase>] [-eut <entity>] [-td <testdlldir>] [-tdc] <Tdoc> [config] Example : MkAllTc CC - creates all available test cases for CC (from CC.doc) -chk: call TDSCheck after generating TDS files -co : compile only - do not regenerate tds-Files from word source -to : generate TDS files only; don't compile test cases -f : generate final test only (test, that are not preambles) -r : generate range from <first> to <last> -k : keep (don't delete) older testcases (useful when using -r) -tty: write tools output to console -i : set <incdir> as additional include directory for test case compilation -td : set <testdlldir> as directory for the test cases -oe : old environment; generate test case for Tap on old frame -oed: same as -oe, but create test cases in a differently named directory -eut: same as EUT=<entity> as last parameter -tc : set test case base name -tdc: use dedicated makefile or msdev project to generate tdc test cases config: EUT=<entity> where the names of testdoc and entity differ like: MkAllTc BMIT EUT=ACI endtext :error set tc_exitcode=1 :end endlocal popd quit %tc_exitcode%