FreeCalypso > hg > tcs211-l1-reconst
view g23m/condat/ms/doc/sap/btp.sap @ 7:706e64623330
pdt_2091.mak patched for successful build
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Mon, 01 Jun 2015 07:16:43 +0000 |
parents | 509db1a7b7b8 |
children |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8"?> <!-- edited with SAPE SAP Editor --> <SAP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="sap.xsd"> <DocInfoSection> <DocName DocType="SAP">btp</DocName> <DocNum Number="100" Project="8445"/> <Description> <Section>This section contains general information on BTP SAP</Section> </Description> <DocHistory> <DocVersion Number="001" Year="00"/> <Date Day="4" Month="9" Year="2000"/> <Author>MVI</Author> <DocStatus State="BEING_PROCESSED"/> <Comment>Initial</Comment> </DocHistory> <DocHistory> <DocVersion Number="002" Year="00"/> <Date Day="15" Month="9" Year="2000"/> <Author>MVI</Author> <DocStatus State="BEING_PROCESSED"/> <Comment>Minor Changes</Comment> </DocHistory> <DocRef> <RefId>[1]</RefId> <RefTitle>Rec. T.4 Standardisation of group 3 facsimile apparatus for document transmission;(CCITT-T.4, 1984)</RefTitle> </DocRef> <DocRef> <RefId>[2]</RefId> <RefTitle>ITU-T Recommendation T.30; Series T: Terminal equipments and protocols for telematic services;Procedures for document facsimile transmission in the general switchedtelephone network;(ITU-T.30, 1996)</RefTitle> </DocRef> <DocRef> <RefId>[3]</RefId> <RefTitle>ITU-T Recommendation T.31; Terminals for telematic services;Asynchronous facsimile DCE control - service class 1(ITU-T.31, 1995)</RefTitle> </DocRef> <DocRef> <RefId>[4]</RefId> <RefTitle>ITU-T Recommendation T.32; Terminals for telematic services;Asynchronous facsimile DCE control - service class 2(ITU-T.32, 1995)</RefTitle> </DocRef> <DocRef> <RefId>[5]</RefId> <RefTitle>Rec. T.35; Terminal equipment and protocols for telematic services;Procedures for the allocation of CCITT definde codes for non-standard facilities;(CCITT-T.35, 1991)</RefTitle> </DocRef> <DocRef> <RefId>[6]</RefId> <RefTitle>ITU-T Recommendation V.25 ter; Series V: data communication over the telephone network;Interfaces and voiceband modems; Serial asynchronous automatic dialling and control(ITU-T V.25 ter, 1997)</RefTitle> </DocRef> <DocRef> <RefId>[7]</RefId> <RefTitle>Rec. V.42 bis Data compression procedures for data circuit terminating equipment (DCE) using error correction procedures;(CCITT-V.42 bis, 1990)</RefTitle> </DocRef> <DocRef> <RefId>[8]</RefId> <RefTitle>Rec. V.110 (Blue book, Vol. VIII, Fascicle VIII.1) Support of data terminal equipments (DTEs) with V-series type interfaces by an integrated services digital network (ISDN);(CCITT-V.110, 1988)</RefTitle> </DocRef> <DocRef> <RefId>[9]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);GSM Public Land Mobile Network (PLMN) connection types;(GSM 3.10, September 1994, version 4.3.1)</RefTitle> </DocRef> <DocRef> <RefId>[10]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);Technical realisation of facsimile group 3 transparent;(GSM 3.45, September 1995, version 4.5.0)</RefTitle> </DocRef> <DocRef> <RefId>[11]</RefId> <RefTitle>Digital cellular telecommunications system (Phase 2);Mobile radio interface layer 3 specification;(GSM 4.08, November 1996, version 4.17.0)</RefTitle> </DocRef> <DocRef> <RefId>[12]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);Rate adaptation on the Mobile Station - Base Station System (MS - BSS) Interface;(GSM 4.21, May 1995, version 4.6.0)</RefTitle> </DocRef> <DocRef> <RefId>[13]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-service Switching Centre (BSS - MSC) interface(GSM 4.22, September 1994, version 4.3.0)</RefTitle> </DocRef> <DocRef> <RefId>[14]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-service Switching Centre (BSS - MSC) interface(Amendment prA1 for GSM 4.22, version 4.3.0)(GSM 4.22, March 1995, version 4.4.0)</RefTitle> </DocRef> <DocRef> <RefId>[15]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS);(GSM 7.01, December 1995, version 4.10.0)</RefTitle> </DocRef> <DocRef> <RefId>[16]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);Terminal Adaptation Functions (TAF) for services using asynchronous bearer capabilities;(GSM 7.02, September 1994, version 4.5.1)</RefTitle> </DocRef> <DocRef> <RefId>[17]</RefId> <RefTitle>European digital cellular telecommunications system (Phase 2);Terminal Adaptation Functions (TAF) for services using synchronous bearer capabilities;(GSM 7.03, September 1994, version 4.5.1)</RefTitle> </DocRef> <DocRef> <RefId>[18]</RefId> <RefTitle>Digital cellular telecommunications system (Phase 2);Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Services (CBS);(GSM 7.05, November 1996, version 4.8.0)</RefTitle> </DocRef> <DocRef> <RefId>[19]</RefId> <RefTitle>Digital cellular telecommunications system (Phase 2);AT command set for GSM Mobile Equipment (ME)(GSM 7.07, May 1996, version 4.1.0)</RefTitle> </DocRef> <DocRef> <RefId>[20]</RefId> <RefTitle>Digital cellular telecommunication system (Phase 2);Mobile Station (MS) conformance specification;Part 1: Conformance specification(GSM 11.10-1, November 1996, version 4.17.0)</RefTitle> </DocRef> <DocRef> <RefId>[21]</RefId> <RefTitle>Digital cellular telecommunications system (Phase 2);Mobile Station (MS) conformance specification;Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification(GSM 11.10-2, May 1996, version 4.15.0)</RefTitle> </DocRef> <DocRef> <RefId>[22]</RefId> <RefTitle>Digital cellular telecommunications system (Phase 2);Mobile Station (MS) conformance specification;Part 3: Layer 3 (L3) Abstract Test Suite (ATS)(GSM 11.10-3, November 1996, version 4.17.0)</RefTitle> </DocRef> <DocRef> <RefId>[23]</RefId> <RefTitle>Proposal for Rate Adaptation implemented on a DSP;(C. Bianconi, Texas Instruments, January 1998, version 1.0)</RefTitle> </DocRef> <DocRef> <RefId>[24]</RefId> <RefTitle>MCU-DSP Interfaces for Data Applications;Specification S844(C. Bianconi, Texas Instruments, March 1998, version 0.1)</RefTitle> </DocRef> <DocRef> <RefId>[25]</RefId> <RefTitle>Users Guide6147.300.96.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[26]</RefId> <RefTitle>Service Access Point RA8411.100.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[27]</RefId> <RefTitle>Service Access Point RLP8411.101.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[28]</RefId> <RefTitle>Service Access Point L2R8411.102.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[29]</RefId> <RefTitle>Service Access Point FAD8411.103.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[30]</RefId> <RefTitle>Service Access Point T308411.104.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[31]</RefId> <RefTitle>Service Access Point ACI8411.105.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[32]</RefId> <RefTitle>Message Sequence Charts RLP8411.201.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[33]</RefId> <RefTitle>Message Sequence Charts L2R8411.202.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[34]</RefId> <RefTitle>Message Sequence Charts FAD8411.203.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[35]</RefId> <RefTitle>Message Sequence Charts T308411.204.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[36]</RefId> <RefTitle>Message Sequence Charts ACI8411.205.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[37]</RefId> <RefTitle>Proposal for Fax & Data Integration; March 19988411.300.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[38]</RefId> <RefTitle>Test Specification RLP8411.401.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[39]</RefId> <RefTitle>Test Specification L2R8411.402.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[40]</RefId> <RefTitle>Test Specification FAD8411.403.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[41]</RefId> <RefTitle>Test Specification T308411.404.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[42]</RefId> <RefTitle>Test Specification ACI8411.405.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[43]</RefId> <RefTitle>SDL Specification RLP8411.501.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[44]</RefId> <RefTitle>SDL Specification L2R8411.502.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[45]</RefId> <RefTitle>SDL Specification FAD8411.503.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[46]</RefId> <RefTitle>SDL Specification T308411.504.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[47]</RefId> <RefTitle>SDL Specification ACI8411.505.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[48]</RefId> <RefTitle>Technical Documentation RLP8411.701.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[49]</RefId> <RefTitle>Technical Documentation L2R8411.702.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[50]</RefId> <RefTitle>Technical Documentation FAD8411.703.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[51]</RefId> <RefTitle>Technical Documentation T308411.704.98.100; Condat GmbH</RefTitle> </DocRef> <DocRef> <RefId>[52]</RefId> <RefTitle>Technical Documentation ACI8411.705.98.100; Condat GmbH</RefTitle> </DocRef> </DocInfoSection> <ConstantsSection> <Description> <Section>This section contains all constants that are defined for the BTP SAP</Section> </Description> <Constant> <Alias>BTI_PIN_LENGTH</Alias> <Value ValueType="HEX">10</Value> <Comment/> </Constant> <Constant> <Alias>BTI_BD_ADDR_LENGTH</Alias> <Value ValueType="HEX">06</Value> <Comment/> </Constant> <Constant> <Alias>BTI_BD_NAME_LENGTH</Alias> <Value ValueType="HEX">F8</Value> <Comment/> </Constant> <Constant> <Alias>BTI_MAX_DATA_LENGTH</Alias> <Value ValueType="HEX">FF</Value> <Comment/> </Constant> <Constant> <Alias>BTI_MAX_NB_SERVICES</Alias> <Value ValueType="HEX">0A</Value> <Comment/> </Constant> <Constant> <Alias>BTI_SERVICE_NAME_LENGTH</Alias> <Value ValueType="HEX">0F</Value> <Comment/> </Constant> <Constant> <Alias>BTI_APPLI_NAME_LENGTH</Alias> <Value ValueType="HEX">0A</Value> <Comment/> </Constant> <Constant> <Alias>BTI_HSG_NAME_LENGTH</Alias> <Value ValueType="HEX">32</Value> <Comment/> </Constant> <Constant> <Alias>BTI_PHONE_NUMBER_MAX_LENGTH</Alias> <Value ValueType="HEX">1E</Value> <Comment/> </Constant> <Constant> <Alias>BTI_PHONE_NB_LIST_MAX_LENGTH</Alias> <Value ValueType="HEX">04</Value> <Comment/> </Constant> <Constant> <Alias>BTI_OPP_NAME_MAX_LENGTH</Alias> <Value ValueType="HEX">100</Value> <Comment/> </Constant> <Constant> <Alias>BTI_OPP_MIME_MAX_LENGTH</Alias> <Value ValueType="HEX">100</Value> <Comment/> </Constant> <Constant> <Alias>BTI_SYNC_OBJECT_IDENTIFIER</Alias> <Value ValueType="HEX">100</Value> <Comment/> </Constant> <Constant> <Alias>BTI_DEVICE_CLASS_LENGTH</Alias> <Value ValueType="HEX">03</Value> <Comment/> </Constant> <Constant> <Alias>BTI_HSG_SPECIFIC_CMD_MAX_LENGTH</Alias> <Value ValueType="HEX">64</Value> <Comment/> </Constant> <Constant> <Alias>BTI_ENTITY_NAME_LEN</Alias> <Value ValueType="HEX">06</Value> <Comment>maximum length of entity name including NULL</Comment> </Constant> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </ConstantsSection> <PrimitivesSection PrimIDType="BIT16" SAPid="58"> <Description> <Section>This section contains all primitives that are defined for the BTP SAP</Section> </Description> <Primitive> <Description> <Section>This is used to request the initialisation of a Bluetooth profile.</Section> </Description> <PrimDef> <Name>BTP_INIT_PROFILE_REQ</Name> <PrimID Direction="UPLINK" Number="0"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation to the BTP_INIT_PROFILE_REQ</Section> </Description> <PrimDef> <Name>BTP_INIT_PROFILE_CNF</Name> <PrimID Direction="DOWNLINK" Number="0"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>action</Name> </ItemLink> <Comment>Action</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>opp_mode</Name> </ItemLink> <Comment>OPP mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>sync_serv_mode</Name> </ItemLink> <Comment>SYNC server mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>sync_init_auth</Name> </ItemLink> <Comment>SYNC init auth</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to request closing down of a Bluetooth profile.</Section> </Description> <PrimDef> <Name>BTP_DEINIT_PROFILE_REQ</Name> <PrimID Direction="UPLINK" Number="1"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation for the BTP_DEINIT_PROFILE_REQ.</Section> </Description> <PrimDef> <Name>BTP_DEINIT_PROFILE_CNF</Name> <PrimID Direction="DOWNLINK" Number="1"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>opp_mode</Name> </ItemLink> <Comment>OPP mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>sync_serv_mode</Name> </ItemLink> <Comment>SYNC server mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>sync_init_auth</Name> </ItemLink> <Comment>SYNC init auth</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to indicate the signal change (RING_ON/RING_OFF and DCD_ON/DCD_OFF).</Section> </Description> <PrimDef> <Name>BTP_SIGNAL_CHANGE_REQ</Name> <PrimID Direction="UPLINK" Number="2"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>signal</Name> </ItemLink> <Comment>Signal</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to start a device inquiry.</Section> </Description> <PrimDef> <Name>BTP_DEVICE_SEARCH_REQ</Name> <PrimID Direction="UPLINK" Number="3"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation that the search is finished.</Section> </Description> <PrimDef> <Name>BTP_SERVICE_SEARCH_CNF</Name> <PrimID Direction="DOWNLINK" Number="3"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>During a search for devices this is used to inform the MMI about found service name and device address.</Section> </Description> <PrimDef> <Name>BTP_SERVICE_FOUND_IND</Name> <PrimID Direction="DOWNLINK" Number="4"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cod</Name> </ItemLink> <Control>[BTI_DEVICE_CLASS_LENGTH]</Control> <Comment>Bluetooth class of device</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>serv_name</Name> </ItemLink> <Control>[BTI_SERVICE_NAME_LENGTH]</Control> <Comment>Bluetooth service name</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to request connection to a device.</Section> </Description> <PrimDef> <Name>BTP_CONNECT_DEVICE_REQ</Name> <PrimID Direction="UPLINK" Number="5"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTP</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Confirmation of BTP_CONNECT_DEVICE_REQ.</Section> </Description> <PrimDef> <Name>BTP_CONNECT_DEVICE_CNF</Name> <PrimID Direction="DOWNLINK" Number="5"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cnf_id</Name> </ItemLink> <Comment>Confirmation identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a response to a BTP_CONNECT_DEVICE_RES.</Section> </Description> <PrimDef> <Name>BTP_CONNECT_DEVICE_RES</Name> <PrimID Direction="UPLINK" Number="6"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is an indication that a remote device wants to establish a connection</Section> </Description> <PrimDef> <Name>BTP_CONNECT_DEVICE_IND</Name> <PrimID Direction="DOWNLINK" Number="6"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>ind_id</Name> </ItemLink> <Comment>Indication identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>src_id</Name> </ItemLink> <Comment>source identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is an information about a bluetooth process</Section> </Description> <PrimDef> <Name>BTP_CONNECT_DEVICE_INF</Name> <PrimID Direction="DOWNLINK" Number="43"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>ind_id</Name> </ItemLink> <Comment>Indication identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to request disconnection from a remote device.</Section> </Description> <PrimDef> <Name>BTP_DISCONNECT_DEVICE_REQ</Name> <PrimID Direction="UPLINK" Number="7"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation to the BTP_DISCONNECT_DEVICE_REQ.</Section> </Description> <PrimDef> <Name>BTP_DISCONNECT_DEVICE_CNF</Name> <PrimID Direction="DOWNLINK" Number="7"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cnf_id</Name> </ItemLink> <Comment>Confirmation identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation to the BTP_DISCONNECT_DEVICE_REQ for Profile DUN and FAX</Section> </Description> <PrimDef> <Name>BTP_DISCON_DUN_FAX_CNF</Name> <PrimID Direction="DOWNLINK" Number="2"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>UBYTE</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This indicates disconnection from the remote device</Section> </Description> <PrimDef> <Name>BTP_DISCONNECT_DEVICE_IND</Name> <PrimID Direction="DOWNLINK" Number="8"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>ind_id</Name> </ItemLink> <Comment>Indication identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This indicates disconnection from the remote device</Section> </Description> <PrimDef> <Name>BTP_DISCON_DUN_FAX_IND</Name> <PrimID Direction="DOWNLINK" Number="14"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to indicate changes in the state of the audio connection to the MMI</Section> </Description> <PrimDef> <Name>BTP_AUDIO_CONNECTION_IND</Name> <PrimID Direction="DOWNLINK" Number="9"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>audio_state</Name> </ItemLink> <Comment>Audio connection state</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to request the transfer of the audio from the headset to the loudspeaker in the cellular phone.</Section> </Description> <PrimDef> <Name>BTP_TRANSFER_AUDIO_IN_REQ</Name> <PrimID Direction="UPLINK" Number="10"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation of BTP_TRANSFER_AUDIO_IN_REQ</Section> </Description> <PrimDef> <Name>BTP_TRANSFER_AUDIO_IN_CNF</Name> <PrimID Direction="DOWNLINK" Number="10"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This function is used to transfer the audio from the loudspeaker of the cellular phone to a headset. If a connection is not already established this will be done, and an audio connection will be established as well.</Section> </Description> <PrimDef> <Name>BTP_TRANSFER_AUDIO_OUT_REQ</Name> <PrimID Direction="UPLINK" Number="11"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation for BTP_TRANSFER_AUDIO_OUT_REQ</Section> </Description> <PrimDef> <Name>BTP_TRANSFER_AUDIO_OUT_CNF</Name> <PrimID Direction="DOWNLINK" Number="11"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cnf_id</Name> </ItemLink> <Comment>Confirmation identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is an indication that a remote device wants to use a service of the local device.</Section> </Description> <PrimDef> <Name>BTP_AUTHORIZATION_IND</Name> <PrimID Direction="DOWNLINK" Number="15"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>appli_name</Name> </ItemLink> <Control>[BTI_APPLI_NAME_LENGTH]</Control> <Comment>Bluetooth appli_name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>authorization_mask_serv</Name> </ItemLink> <Comment>authorization_mask</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>incom_conn</Name> </ItemLink> <Comment>type of connection</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is an indication that a PIN is needed.Parameter of remote device.</Section> </Description> <PrimDef> <Name>BTP_PIN_IND</Name> <PrimID Direction="DOWNLINK" Number="12"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to request reconfiguration of a profile.</Section> </Description> <PrimDef> <Name>BTP_RECONFIG_PROFILE_REQ</Name> <PrimID Direction="UPLINK" Number="13"/> <PrimUsage> <Sender>MMI</Sender> <Receiver>BTI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation for BTP_RECONFIG_PROFILE_REQ.</Section> </Description> <PrimDef> <Name>BTP_RECONFIG_PROFILE_CNF</Name> <PrimID Direction="DOWNLINK" Number="13"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>opp_mode</Name> </ItemLink> <Comment>OPP mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>sync_serv_mode</Name> </ItemLink> <Comment>SYNC server mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>sync_init_auth</Name> </ItemLink> <Comment>SYNC init auth</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to trigger a GSM to BT data transfer in simulation.</Section> </Description> <PrimDef> <Name>BTI_SEND_DATA_TEST</Name> <PrimID Direction="DOWNLINK" Number="16"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>len</Name> </ItemLink> <Comment>Data lenght</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>port_nb</Name> </ItemLink> <Comment>Port number</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>ind_data</Name> </ItemLink> <Control>[BTI_MAX_DATA_LENGTH]</Control> <Comment>Data</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to trigger a BT to GSM data transfer in simulation.</Section> </Description> <PrimDef> <Name>BTI_GET_DATA_TEST</Name> <PrimID Direction="DOWNLINK" Number="17"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>len</Name> </ItemLink> <Comment>Data lenght</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>port_nb</Name> </ItemLink> <Comment>Port number</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>ind_data</Name> </ItemLink> <Control>[BTI_MAX_DATA_LENGTH]</Control> <Comment>Data</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to send the result value of BT restoring of default device list.</Section> </Description> <PrimDef> <Name>BTP_RESTORE_LIST_RESULT</Name> <PrimID Direction="DOWNLINK" Number="18"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to send the result value of BT restoring of configuration parameters.</Section> </Description> <PrimDef> <Name>BTP_RESTORE_CONF_RESULT</Name> <PrimID Direction="DOWNLINK" Number="19"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>During a search for services this is used to inform the MMI about each found service to a device.</Section> </Description> <PrimDef> <Name>BTP_DEVICE_FOUND_IND</Name> <PrimID Direction="DOWNLINK" Number="20"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cod</Name> </ItemLink> <Control>[BTI_DEVICE_CLASS_LENGTH]</Control> <Comment>Bluetooth class of device</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>num_services</Name> </ItemLink> <Comment>Bluetooth num of services</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>services</Name> </ItemLink> <Comment>Bluetooth services</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is a confirmation that the search of device is finished.</Section> </Description> <PrimDef> <Name>BTP_DEVICE_SEARCH_CNF</Name> <PrimID Direction="DOWNLINK" Number="21"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about the pairing procedure with a remote device.</Section> </Description> <PrimDef> <Name>BTP_DEVICE_PAIRED_IND</Name> <PrimID Direction="DOWNLINK" Number="22"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>pair_result</Name> </ItemLink> <Comment>pairing result</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about the status of data call profile dun/fax.</Section> </Description> <PrimDef> <Name>BTP_CALL_MONITORING_STATUS</Name> <PrimID Direction="DOWNLINK" Number="23"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>call_status</Name> </ItemLink> <Comment>call_monitoring_state</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about the status of data link profile dun/fax.</Section> </Description> <PrimDef> <Name>BTP_LINK_MONITORING_STATUS</Name> <PrimID Direction="DOWNLINK" Number="24"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>link_status</Name> </ItemLink> <Comment>link_monitoring_state</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about the opp client request to push an object to the opp server.</Section> </Description> <PrimDef> <Name>BTP_OPP_SERV_PUT_IND</Name> <PrimID Direction="DOWNLINK" Number="25"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_type</Name> </ItemLink> <Comment>Bluetooth object type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_name</Name> </ItemLink> <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control> <Comment>Bluetooth object name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_m_t</Name> </ItemLink> <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control> <Comment>Bluetooth object mime t</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_length</Name> </ItemLink> <Comment>Bluetooth object length</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about the success of the object push operation.</Section> </Description> <PrimDef> <Name>BTP_OPP_SERV_PUT_CNF</Name> <PrimID Direction="DOWNLINK" Number="26"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_type</Name> </ItemLink> <Comment>Bluetooth object type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_name</Name> </ItemLink> <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control> <Comment>Bluetooth object name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_m_t</Name> </ItemLink> <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control> <Comment>Bluetooth object mime t</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_length</Name> </ItemLink> <Comment>Bluetooth object length</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about the object push operation to an OPP server.</Section> </Description> <PrimDef> <Name>BTP_OPP_OBJECT_PUSH_CNF</Name> <PrimID Direction="DOWNLINK" Number="27"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_type</Name> </ItemLink> <Comment>Bluetooth object type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_name</Name> </ItemLink> <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control> <Comment>Bluetooth object name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_m_t</Name> </ItemLink> <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control> <Comment>Bluetooth object mime t</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_length</Name> </ItemLink> <Comment>Bluetooth object length</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about the object push operation from an OPP server.</Section> </Description> <PrimDef> <Name>BTP_OPP_OBJECT_PULL_CNF</Name> <PrimID Direction="DOWNLINK" Number="28"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_type</Name> </ItemLink> <Comment>Bluetooth object type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_name</Name> </ItemLink> <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control> <Comment>Bluetooth object name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_m_t</Name> </ItemLink> <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control> <Comment>Bluetooth object mime t</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_length</Name> </ItemLink> <Comment>Bluetooth object length</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to inform about result of synchronization procedure which may have</Section> <Section>been started by SYNC server or SYNC client (also after termination of procedure)</Section> </Description> <PrimDef> <Name>BTP_SRV_SYNC_CNF</Name> <PrimID Direction="DOWNLINK" Number="29"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cause</Name> </ItemLink> <Comment>Error cause</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This is used to request a password used for authentification at OBEX level,</Section> <Section>either for an authentification challenge or an authentification response</Section> </Description> <PrimDef> <Name>BTP_SRV_SYNC_AUTH_IND</Name> <PrimID Direction="DOWNLINK" Number="30"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>The SYNC server informs that the SYNC client requests to pull an object from SYNC server.</Section> </Description> <PrimDef> <Name>BTP_SRV_SYNC_PULL_IND</Name> <PrimID Direction="DOWNLINK" Number="31"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_id_size</Name> </ItemLink> <Comment>Bluetooth object id size</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_id_loc</Name> </ItemLink> <Control>[BTI_SYNC_OBJECT_IDENTIFIER]</Control> <Comment>Bluetooth object id location</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>The SYNC server informs that the SYNC client requests to push an object to SYNC server.</Section> </Description> <PrimDef> <Name>BTP_SRV_SYNC_PUSH_IND</Name> <PrimID Direction="DOWNLINK" Number="32"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_id_size</Name> </ItemLink> <Comment>Bluetooth object id size</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_id_loc</Name> </ItemLink> <Control>[BTI_SYNC_OBJECT_IDENTIFIER]</Control> <Comment>Bluetooth object id location</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>The SYNC server informs that the SYNC profile has received an entire object pushed</Section> <Section>by SYNC client.</Section> </Description> <PrimDef> <Name>BTP_SRV_SYNC_PUSH_CNF</Name> <PrimID Direction="DOWNLINK" Number="33"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>subtype</Name> </ItemLink> <Comment>Device subtype</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_type</Name> </ItemLink> <Comment>Bluetooth object type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_name</Name> </ItemLink> <Control>[BTI_OPP_NAME_MAX_LENGTH]</Control> <Comment>Bluetooth object name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_m_t</Name> </ItemLink> <Control>[BTI_OPP_MIME_MAX_LENGTH]</Control> <Comment>Bluetooth object mime t</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_length</Name> </ItemLink> <Comment>Bluetooth object length</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_id_size</Name> </ItemLink> <Comment>Bluetooth object id size</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>object_id_loc</Name> </ItemLink> <Control>[BTI_SYNC_OBJECT_IDENTIFIER]</Control> <Comment>Bluetooth object id location</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of profile SYNC Server</Section> </Description> <PrimDef> <Name>BTP_SRV_SYNC_TEST</Name> <PrimID Direction="DOWNLINK" Number="34"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of profile OPP Server</Section> </Description> <PrimDef> <Name>BTP_SRV_OPP_TEST</Name> <PrimID Direction="DOWNLINK" Number="35"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of profile OPP Client</Section> </Description> <PrimDef> <Name>BTP_CL_OPP_TEST</Name> <PrimID Direction="DOWNLINK" Number="36"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of profile HSG Client</Section> </Description> <PrimDef> <Name>BTP_CL_HSG_TEST</Name> <PrimID Direction="DOWNLINK" Number="37"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of profile HSG Server</Section> </Description> <PrimDef> <Name>BTP_SRV_HSG_TEST</Name> <PrimID Direction="DOWNLINK" Number="38"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of profile FAX</Section> </Description> <PrimDef> <Name>BTP_FAX_TEST</Name> <PrimID Direction="DOWNLINK" Number="39"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of profile Dial up Network</Section> </Description> <PrimDef> <Name>BTP_DUN_TEST</Name> <PrimID Direction="DOWNLINK" Number="40"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: function calls and primitives of security and discovery managment</Section> </Description> <PrimDef> <Name>BTP_SEC_BROWS_TEST</Name> <PrimID Direction="DOWNLINK" Number="41"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: common function calls and primitives</Section> </Description> <PrimDef> <Name>BTP_OTHER_TEST</Name> <PrimID Direction="DOWNLINK" Number="42"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>func_id</Name> </ItemLink> <Comment>function_identifier</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Signals that the list of trusted (authorized) devices is full and that no more devices can be stored in this list.</Section> </Description> <PrimDef> <Name>BTP_TRUSTED_DEV_LIST_FULL</Name> <PrimID Direction="DOWNLINK" Number="44"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>*No description found in source document*</Section> </Description> <PrimDef> <Name>BTP_CHNG_LOCAL_NAME</Name> <PrimID Direction="DOWNLINK" Number="45"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>*No description found in source document*</Section> </Description> <PrimDef> <Name>BTP_READ_LOCAL_NAME</Name> <PrimID Direction="DOWNLINK" Number="46"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>Test Primitive: common function calls and primitives</Section> </Description> <PrimDef> <Name>BTP_REMOTE_DEV_INFO_RES</Name> <PrimID Direction="DOWNLINK" Number="47"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cod</Name> </ItemLink> <Control>[BTI_DEVICE_CLASS_LENGTH]</Control> <Comment>Bluetooth class of device</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_name</Name> </ItemLink> <Control>[BTI_BD_NAME_LENGTH]</Control> <Comment>Bluetooth device name</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>*No description found in source document*</Section> </Description> <PrimDef> <Name>BTP_CHNG_CONNECTABLE_MODE</Name> <PrimID Direction="DOWNLINK" Number="48"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>mode</Name> </ItemLink> <Comment>mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>scan_interval</Name> </ItemLink> <Comment>Scan Interval</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>scan_window</Name> </ItemLink> <Comment>Scan Window</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>*No description found in source document*</Section> </Description> <PrimDef> <Name>BTP_CHNG_DISCOVERABLE_MODE</Name> <PrimID Direction="DOWNLINK" Number="49"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>mode</Name> </ItemLink> <Comment>mode</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>scan_interval</Name> </ItemLink> <Comment>Scan Interval</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>scan_window</Name> </ItemLink> <Comment>Scan Window</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>*No description found in source document*</Section> </Description> <PrimDef> <Name>BTP_READ_BD_ADDR</Name> <PrimID Direction="DOWNLINK" Number="50"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>PCA is a customer specific application. Derived from DUN profile</Section> </Description> <PrimDef> <Name>BTP_PCA_EVENT</Name> <PrimID Direction="DOWNLINK" Number="51"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>pca_event</Name> </ItemLink> <Comment>event</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>pca_gw_status</Name> </ItemLink> <Comment>gateway status</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>pca_link_status</Name> </ItemLink> <Comment>link status</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>pca_call_status</Name> </ItemLink> <Comment>call status</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>pca_hangup</Name> </ItemLink> <Comment>hangup</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>*No description found in source document*</Section> </Description> <PrimDef> <Name>BTP_PROFILE_CREATE_CNF</Name> <PrimID Direction="DOWNLINK" Number="52"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device/Profile type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>*No description found in source document*</Section> </Description> <PrimDef> <Name>BTP_PROFILE_DELETE_CNF</Name> <PrimID Direction="DOWNLINK" Number="53"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>success</Name> </ItemLink> <Comment>success</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device/Profile type</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This indicates connection from the remote headset device</Section> </Description> <PrimDef> <Name>BTP_HSG_HEADSET_CONNECTION_IND</Name> <PrimID Direction="DOWNLINK" Number="64"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>device</Name> </ItemLink> <Comment>Device type</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>ind_id</Name> </ItemLink> <Comment>Indication identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>bd_addr</Name> </ItemLink> <Control>[BTI_BD_ADDR_LENGTH]</Control> <Comment>Bluetooth device address</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This means remote headset sends AT command to us</Section> </Description> <PrimDef> <Name>BTP_HSG_SPECIFIC_CMD_RDY</Name> <PrimID Direction="DOWNLINK" Number="65"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>cmd</Name> </ItemLink> <Control>[BTI_HSG_SPECIFIC_CMD_MAX_LENGTH]</Control> <Comment>Headset special AT command</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>This event is received after we save default headset list to FFS</Section> </Description> <PrimDef> <Name>BTP_HSG_SAVE_LIST_CNF</Name> <PrimID Direction="DOWNLINK" Number="66"/> <PrimUsage> <Sender>BTI</Sender> <Receiver>MMI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>result</Name> </ItemLink> <Comment>Result</Comment> </PrimItem> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </Primitive> <Primitive> <Description> <Section>The BTP_DTI_REQ is used to connect or disconnect the DTI communication with the upper layer. It is indicated by the parameter dti_conn, if the upper layer wants to connect or disconnect. The same parameter is repeated in the corresponding BTP_DTI_CNF.</Section> </Description> <PrimDef> <Name>BTP_DTI_REQ</Name> <PrimID Direction="UPLINK" Number="14"/> <PrimUsage> <Sender>CTL</Sender> <Receiver>BTP</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>dti_conn</Name> </ItemLink> <Comment>DTI connect</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>entity_name</Name> </ItemLink> <Control>[BTI_ENTITY_NAME_LEN]</Control> <Comment>entity name</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>link_id</Name> </ItemLink> <Comment>link identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>dti_direction</Name> </ItemLink> <Comment>DTI direction</Comment> </PrimItem> <History> <Date Day="3" Month="5" Year="2002"/> <Author>TVO</Author> <Comment>Initial</Comment> </History> </Primitive> <Primitive> <Description> <Section>The BTP_DTI_CNF is used to acknowledge a previous BTP_DTI_REQ. The parameter value of dti_conn is always the same as in the corresponding BTP_DTI_REQ. The parameter link_id can be used to identify the DTI link.</Section> </Description> <PrimDef> <Name>BTP_DTI_CNF</Name> <PrimID Direction="DOWNLINK" Number="54"/> <PrimUsage> <Sender>BTP</Sender> <Receiver>CTL</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>dti_conn</Name> </ItemLink> <Comment>DTI connect</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>link_id</Name> </ItemLink> <Comment>link identifier</Comment> </PrimItem> <History> <Date Day="3" Month="5" Year="2002"/> <Author>TVO</Author> <Comment>Initial</Comment> </History> </Primitive> <Primitive> <Description> <Section>The BTP_DTI_IND is used by BTP to pass the control of the DTI back to the upper layer. The parameter link_id can be used to identify the DTI link.</Section> </Description> <PrimDef> <Name>BTP_DTI_IND</Name> <PrimID Direction="DOWNLINK" Number="55"/> <PrimUsage> <Sender>BTP</Sender> <Receiver>CTL</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>dti_conn</Name> </ItemLink> <Comment>DTI connect</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">btp</DocName> <Name>link_id</Name> </ItemLink> <Comment>link identifier</Comment> </PrimItem> <History> <Date Day="3" Month="5" Year="2002"/> <Author>TVO</Author> <Comment>Initial</Comment> </History> </Primitive> </PrimitivesSection> <PrimBasicElementsSection> <Description> <Section>Parameters shall be part of the primitives described above and if applied the parameters shall contain the values specified here.</Section> </Description> <PrimBasicElem> <Description> <Section>This is used for giving results.</Section> </Description> <PrimBasicElemDef> <Name>result</Name> <Type>U8</Type> <Comment>Result</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_result</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The type of device/profile id</Section> </Description> <PrimBasicElemDef> <Name>device</Name> <Type>U8</Type> <Comment>device type</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_device</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The subtype of device</Section> </Description> <PrimBasicElemDef> <Name>subtype</Name> <Type>U8</Type> <Comment>subtype</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_subtype</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The Bluetooth device address</Section> </Description> <PrimBasicElemDef> <Name>bd_addr</Name> <Type>U8</Type> <Comment>Bluetooth device address</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The Bluetooth device name</Section> </Description> <PrimBasicElemDef> <Name>bd_name</Name> <Type>U8</Type> <Comment>Bluetooth device name</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the cause of an error.</Section> </Description> <PrimBasicElemDef> <Name>cause</Name> <Type>U8</Type> <Comment>Error cause</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the confirmation identifier</Section> </Description> <PrimBasicElemDef> <Name>cnf_id</Name> <Type>U8</Type> <Comment>Confirmation identifier</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the indication identifier</Section> </Description> <PrimBasicElemDef> <Name>ind_id</Name> <Type>U8</Type> <Comment>Indication identifier</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the indication data</Section> </Description> <PrimBasicElemDef> <Name>ind_data</Name> <Type>U8</Type> <Comment>Indication data</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>Current sent signal (only for test purposes)</Section> </Description> <PrimBasicElemDef> <Name>signal</Name> <Type>U8</Type> <Comment>signal</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_signal</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the data length, aka number of bytes</Section> </Description> <PrimBasicElemDef> <Name>len</Name> <Type>U8</Type> <Comment>Data length</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The Bluetooth service name</Section> </Description> <PrimBasicElemDef> <Name>serv_name</Name> <Type>U8</Type> <Comment>Bluetooth device name</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The Bluetooth services bitmap</Section> </Description> <PrimBasicElemDef> <Name>services</Name> <Type>U32</Type> <Comment>Bluetooth services</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This is used for giving results.</Section> </Description> <PrimBasicElemDef> <Name>pair_result</Name> <Type>U8</Type> <Comment>Pairing Result</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_pair_result</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This is used for giving status of data call (profile dun and fax).</Section> </Description> <PrimBasicElemDef> <Name>call_status</Name> <Type>U8</Type> <Comment>state of data call</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_call_status</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This is used for giving status of data link (profile dun and fax).</Section> </Description> <PrimBasicElemDef> <Name>link_status</Name> <Type>U8</Type> <Comment>state of data link</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_link_status</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>In this 32 bits unsigned integer each bit represents a service</Section> </Description> <PrimBasicElemDef> <Name>authorization_mask_serv</Name> <Type>U32</Type> <Comment>service identifier</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the type of connection</Section> </Description> <PrimBasicElemDef> <Name>incom_conn</Name> <Type>U8</Type> <Comment>incoming connection</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The Bluetooth application name</Section> </Description> <PrimBasicElemDef> <Name>appli_name</Name> <Type>U8</Type> <Comment>Bluetooth appli name</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>Port number for BT data transaction, only used for simulation</Section> </Description> <PrimBasicElemDef> <Name>port_nb</Name> <Type>U32</Type> <Comment>Port number</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the state of the audio connection</Section> </Description> <PrimBasicElemDef> <Name>audio_state</Name> <Type>U8</Type> <Comment>Audio connection state</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_audio_state</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the mode of profile OPP in server mode</Section> </Description> <PrimBasicElemDef> <Name>opp_mode</Name> <Type>U8</Type> <Comment>status of OPP server</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_opp_mode</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains type of storing of objects for OPP/SYNC</Section> </Description> <PrimBasicElemDef> <Name>object_type</Name> <Type>U8</Type> <Comment>object type</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_object_type</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the name of a OPP/SYNC object</Section> </Description> <PrimBasicElemDef> <Name>object_name</Name> <Type>U8</Type> <Comment>Bluetooth object name</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the type of MIME of OPP/SYNC object</Section> </Description> <PrimBasicElemDef> <Name>object_m_t</Name> <Type>U8</Type> <Comment>Bluetooth object MIME type</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This contains the length of a OPP/SYNC object</Section> </Description> <PrimBasicElemDef> <Name>object_length</Name> <Type>U32</Type> <Comment>object length</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>common mode of the SYNC server</Section> </Description> <PrimBasicElemDef> <Name>sync_serv_mode</Name> <Type>U8</Type> <Comment>SYNC server mode</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_sync_serv_mode</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>initiation authentication mode of the SYNC server</Section> </Description> <PrimBasicElemDef> <Name>sync_init_auth</Name> <Type>U8</Type> <Comment>SYNC initiation authentication</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_sync_init_auth</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>size of object ID</Section> </Description> <PrimBasicElemDef> <Name>object_id_size</Name> <Type>U16</Type> <Comment>size of object identifier</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>location of object ID</Section> </Description> <PrimBasicElemDef> <Name>object_id_loc</Name> <Type>U8</Type> <Comment>location of sync object</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>function identifier for window32 test</Section> </Description> <PrimBasicElemDef> <Name>func_id</Name> <Type>U8</Type> <Comment>function identifier</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>source identifier for connection indication of profile HSG</Section> </Description> <PrimBasicElemDef> <Name>src_id</Name> <Type>U8</Type> <Comment>soure identifier</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_src_id</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>Number of available services on device</Section> </Description> <PrimBasicElemDef> <Name>num_services</Name> <Type>U32</Type> <Comment>number of services</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The Bluetooth class of device</Section> </Description> <PrimBasicElemDef> <Name>cod</Name> <Type>U8</Type> <Comment>Bluetooth class of device</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>Signals Success or Failure of BTCTRL operation</Section> </Description> <PrimBasicElemDef> <Name>success</Name> <Type>U8</Type> <Comment>BTCTRL success</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter indicates the time interval from starting the last inquiry/paging until the next one.</Section> </Description> <PrimBasicElemDef> <Name>scan_interval</Name> <Type>U32</Type> <Comment>Scan Interval</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter indicates the amount of time for the last inquiry/paging.</Section> </Description> <PrimBasicElemDef> <Name>scan_window</Name> <Type>U32</Type> <Comment>Scan Window</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter indicates current discoverable or connectable mode (depending on primitive).</Section> </Description> <PrimBasicElemDef> <Name>mode</Name> <Type>U32</Type> <Comment>Conn/Disc Mode</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter describes whether BTP_INIT_PROFILE_CNF was sent for enabling or for initialisation</Section> </Description> <PrimBasicElemDef> <Name>action</Name> <Type>U8</Type> <Comment>Action</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_action</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter indicates the current status of PCA gateway</Section> </Description> <PrimBasicElemDef> <Name>pca_gw_status</Name> <Type>U32</Type> <Comment>gw status</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter indicates current call status of PCA</Section> </Description> <PrimBasicElemDef> <Name>pca_call_status</Name> <Type>U32</Type> <Comment>call status</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter indicates current link status of PCA</Section> </Description> <PrimBasicElemDef> <Name>pca_link_status</Name> <Type>U32</Type> <Comment>link status</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter indicates current hangup state of PCA</Section> </Description> <PrimBasicElemDef> <Name>pca_hangup</Name> <Type>U32</Type> <Comment>hangup state</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>Describes the PCA event received. Needed to map multiple PCA results in on primitve</Section> </Description> <PrimBasicElemDef> <Name>pca_event</Name> <Type>U8</Type> <Comment>event</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_pca_event</Name> </ValuesLink> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The headset special AT command</Section> </Description> <PrimBasicElemDef> <Name>cmd</Name> <Type>S8</Type> <Comment>Headset special AT command</Comment> </PrimBasicElemDef> <History> <Date Day="12" Month="12" Year="1954"/> <Author>doc2xml</Author> <Comment>no history in source document</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>The parameter defines, if BTP shall be connected via the DTI to the upper layer or not.</Section> </Description> <PrimBasicElemDef> <Name>dti_conn</Name> <Type>U8</Type> <Comment>DTI connect</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_dti_conn</Name> </ValuesLink> <History> <Date Day="3" Month="5" Year="2002"/> <Author>TVO</Author> <Comment>Initial</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter contains a string (zero terminated) which is the name of a neighbour entity, i.e. the entity handling a higher or lower protocol. The parameter is used to open the communication channel to this entity.</Section> </Description> <PrimBasicElemDef> <Name>entity_name</Name> <Type>U8</Type> <Comment>name of an neighbour entity</Comment> </PrimBasicElemDef> <History> <Date Day="3" Month="5" Year="2002"/> <Author>TVO</Author> <Comment>Initial</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter is used to identify the affected channel in case of multiplexing.</Section> </Description> <PrimBasicElemDef> <Name>link_id</Name> <Type>U32</Type> <Comment>Link identifier</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_link_id</Name> </ValuesLink> <History> <Date Day="3" Month="5" Year="2002"/> <Author>TVO</Author> <Comment>Initial</Comment> </History> </PrimBasicElem> <PrimBasicElem> <Description> <Section>This parameter controls if BTI uses the DTI in the normal way or if the primitives are inverted. In the normal way data are sent as DTI_DATA_IND and received as DTI_DATA_REQ. In the inverted mode data are send as DTI_DATA_REQ and received as DTI_DATA_IND.</Section> </Description> <PrimBasicElemDef> <Name>dti_direction</Name> <Type>U8</Type> <Comment>DTI direction</Comment> </PrimBasicElemDef> <ValuesLink> <DocName DocType="SAP">btp</DocName> <Name>VAL_dti_direction</Name> </ValuesLink> <History> <Date Day="3" Month="5" Year="2002"/> <Author>TVO</Author> <Comment>Initial</Comment> </History> </PrimBasicElem> </PrimBasicElementsSection> <ValuesSection> <Description> <Section>This section contains all sets of values that are defined for the BTP SAP</Section> </Description> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_result</Name> <Comment>values for result</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">00</Value> <Alias>BTI_OK</Alias> <Comment>Successful</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_NOK</Alias> <Comment>Not successful</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_device</Name> <Comment>values for device</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_HEADSET</Alias> <Comment>Headset profile/device</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_DIAL_UP</Alias> <Comment>Dial Up profile/device</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>BTI_SDP</Alias> <Comment>Service discovery profile</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">04</Value> <Alias>BTI_FAX_GW</Alias> <Comment>Fax profile/device</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">05</Value> <Alias>BTI_OPP</Alias> <Comment>Object P/P profile/device</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">06</Value> <Alias>BTI_SYNC</Alias> <Comment>Synchronization profile server</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">07</Value> <Alias>BTI_SYNC_CMD</Alias> <Comment>Synchronization profile/device supportes SYNC commands</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">08</Value> <Alias>BTI_PCA_GW</Alias> <Comment>PCA Gateway</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_subtype</Name> <Comment>values for subtype</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_CLIENT</Alias> <Comment>client mode</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_SERVER</Alias> <Comment>server mode</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">FF</Value> <Alias>BTI_NO_SUBTYP</Alias> <Comment>no subtype</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_signal</Name> <Comment>values for signal</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">00</Value> <Alias>BTI_SIGNAL_OFF</Alias> <Comment>See description above</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_SIGNAL_RING_ON</Alias> <Comment>See description above</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_SIGNAL_DCD_ON</Alias> <Comment>See description above</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_pair_result</Name> <Comment>values for pair_result</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">00</Value> <Alias>BTI_PAIRING_SUCESSFULL</Alias> <Comment>Successful</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_PAIRING_FAILURE</Alias> <Comment>Not successful</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_call_status</Name> <Comment>values for call_status</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">00</Value> <Alias>BTI_DUN_CALL_IN_PRO</Alias> <Comment>DUN Data call in progress</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_DUN_CALL_ESTABLISHED</Alias> <Comment>DUN Data call established</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_DUN_CALL_PAUSED</Alias> <Comment>DUN Data call paused</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>BTI_DUN_CALL_RESUMED</Alias> <Comment>DUN Data call resumed</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">04</Value> <Alias>BTI_DUN_CALL_HANGUP_IN_PR</Alias> <Comment>DUN Hang_up in progress</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">05</Value> <Alias>BTI_DUN_CALL_RELEASED</Alias> <Comment>DUN Data call released</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">06</Value> <Alias>BTI_FAX_CALL_IN_PRO</Alias> <Comment>FAX Data call in progress</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">07</Value> <Alias>BTI_FAX_CALL_ESTABLISHED</Alias> <Comment>FAX Data call established</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">08</Value> <Alias>BTI_FAX_CALL_HANGUP_IN_PR</Alias> <Comment>FAX Hang_up in progress</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">09</Value> <Alias>BTI_FAX_CALL_RELEASED</Alias> <Comment>FAX Data call released</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_link_status</Name> <Comment>values for link_status</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">00</Value> <Alias>BTI_DUN_NOT_CONNECTED</Alias> <Comment>no DUN -DT connected to DUN GW</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_DUN_CONNECTED</Alias> <Comment>DUN -DT connected to DUN GW</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_FAX_NOT_CONNECTED</Alias> <Comment>no FAX -DT connected to FAX GW</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>BTI_FAX_CONNECTED</Alias> <Comment>FAX -DT connected to FAX GW</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_audio_state</Name> <Comment>values for audio_state</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_CONNECTION_ESTABLISHED</Alias> <Comment>See description above</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_CONNECTION_RELEASED</Alias> <Comment>See description above</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_opp_mode</Name> <Comment>values for opp_mode</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">00</Value> <Alias>BTI_NO_OPP_MODE</Alias> <Comment>no profile OPP</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_OPP_SILENT_FILE_MODE</Alias> <Comment>store received object as file without alerting of user</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_OPP_EVENT_FILE_MODE</Alias> <Comment>store received object as file with information of user</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>BTI_OPP_EVENT_BUFFER_MODE</Alias> <Comment>ask for a buffer for store objects</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_object_type</Name> <Comment>values for object_type</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_TYPE_PATH</Alias> <Comment>path for object in file system</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_TYPE_BUFFER</Alias> <Comment>request buffer for store of object</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_sync_serv_mode</Name> <Comment>values for sync_serv_mode</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_GEN_SYNC</Alias> <Comment>general sync mode of SYNC server</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_INIT_SYNC</Alias> <Comment>initialization sync mode</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>BTI_NO_SYNC_MODE</Alias> <Comment>no sync mode</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_sync_init_auth</Name> <Comment>values for sync_init_auth</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_INITIATE_AUTHENTICATION</Alias> <Comment>server initiates authentication</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_NO_INITIATE_AUTHENTICATION</Alias> <Comment>server initiates no authentication</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>BTI_NO_SYNC_AUTHENTICATION_MODE</Alias> <Comment>no authentication SYNC mode</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_src_id</Name> <Comment>values for src_id</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>REM_HEADSET</Alias> <Comment>initiate by remote headset</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>GSM_NETWORK</Alias> <Comment>initiate by gsm network</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>NO_PROFILE_HSG</Alias> <Comment>only meaning for profile hsg</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_action</Name> <Comment>values for action</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">00</Value> <Alias>BTI_PROFILE_INIT</Alias> <Comment>Initialize a profile</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_PROFILE_ENABLE</Alias> <Comment>Enable a profile</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_pca_event</Name> <Comment>values for pca_event</Comment> </ValuesDef> <ValuesItem> <Value ValueType="HEX">01</Value> <Alias>BTI_PCA_GW_STATUS_CFM</Alias> <Comment>pca gateway status result</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">02</Value> <Alias>BTI_PCA_GW_LINK_MONITORING</Alias> <Comment>pca link monitoring result</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">03</Value> <Alias>BTI_PCA_GW_CALL_MONITORING</Alias> <Comment>pca call monitoring result</Comment> </ValuesItem> <ValuesItem> <Value ValueType="HEX">04</Value> <Alias>BTI_PCA_GW_HANGUP_CFM</Alias> <Comment>pca hangup state</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_dti_conn</Name> <Comment>values for dti_conn</Comment> </ValuesDef> <ValuesItem> <Value ValueType="DEC">0</Value> <Alias>BTI_CONNECT_DTI</Alias> <Comment>Connect DTI to BTI</Comment> </ValuesItem> <ValuesItem> <Value ValueType="DEC">1</Value> <Alias>BTI_DISCONNECT_DTI</Alias> <Comment>Disconnect DTI from BTI</Comment> </ValuesItem> <ValuesItem> <Value ValueType="DEC">2</Value> <Alias>BTI_ERROR_DTI</Alias> <Comment>Error, DTI disconnected</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_link_id</Name> <Comment>values for link_id</Comment> </ValuesDef> <ValuesItem> <Value ValueType="DEC">0</Value> <Alias>BTP_LINK_ID_DEFAULT</Alias> <Comment>Default link id</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> <Values> <Description> <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section> </Description> <ValuesDef> <Name>VAL_dti_direction</Name> <Comment>values for dti_direction</Comment> </ValuesDef> <ValuesItem> <Value ValueType="DEC">0</Value> <Alias>BTI_DTI_NORMAL</Alias> <Comment>DTI used normally</Comment> </ValuesItem> <ValuesItem> <Value ValueType="DEC">1</Value> <Alias>BTI_DTI_INVERTED</Alias> <Comment>DTI is inverted</Comment> </ValuesItem> <History> <Date Day="4" Month="11" Year="2003"/> <Author>doc2XML</Author> <Comment>Initial</Comment> </History> </Values> </ValuesSection> </SAP>