/******************************************************************************
            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION           
                                                                             
   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only 
   Unauthorized reproduction and/or distribution is strictly prohibited.  This 
   product  is  protected  under  copyright  law  and  trade  secret law as an 
   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All 
   rights reserved.                                                            
                  
                                                           
   Filename       	: rhea_arm.h

   Description    	: Header file for the ARM RHEA interface

   Project        	: drivers

   Author         	: pmonteil@tif.ti.com  Patrice Monteil.

   Version number	: 1.5

   Date and time	: 01/30/01 10:22:28

   Previous delta 	: 12/08/00 11:38:10

   SCCS file      	: /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/RELEASE_GPRS/drivers1/common/SCCS/s.rhea_arm.h

   Sccs Id  (SID)       : '@(#) rhea_arm.h 1.5 01/30/01 10:22:28 '

 
*****************************************************************************/

#include "chipset.cfg"

/**** RHEA control register ****/

#define RHEA_CNTL_FACT_0   0x000f	/* Division factor for strobe 0 */
#define RHEA_CNTL_FACT_1   0x00f0	/* Division factor for strobe 1 */
#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
  #define RHEA_CNTL_TIMEOUT  0xff00 	/* RHEA bus access timeout */
#else
  #define RHEA_CNTL_TIMEOUT  0xfe00 	/* RHEA bus access timeout */
#endif

/**** API control register ****/

#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
  #define RHEA_API_WS_H   0x001f		/* API wait states when DSP is in HOM mode */
  #define RHEA_API_WS_S   0x03e0		/* API wait states when DSP in in SAM mode */
#else
  #define RHEA_API_WS_H   0x001f		/* API wait states for High clkout */
  #define RHEA_API_WS_L   0x02e0		/* API wait states for Low clkout */
#endif

/**** ARM RHEA control register ****/

#define RHEA_ARM_WEN_0   0x0001		/* Write enable for strobe 0 */
#define RHEA_ARM_WEN_1   0x0002		/* Write enable for strobe 1 */

/*--------------------------------------------------------------
 *  RHEA_INITRHEA()
 *--------------------------------------------------------------
 * Parameters :Fac0 acces factor strb0, Fac1 acces factor strb1
 *		timeout max time periph stall the processor
 * Return     :	none
 * Functionality :Initialize the RHEA control register
 *--------------------------------------------------------------*/

#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
  #define RHEA_INITRHEA(Fac0,Fac1,TimeOut) (* (unsigned short *) MEM_RHEA_CNTL = (Fac0 | Fac1 << 4 | TimeOut << 8))
#else
  #define RHEA_INITRHEA(Fac0,Fac1,TimeOut) (* (unsigned short *) MEM_RHEA_CNTL = (Fac0 | Fac1 << 4 | TimeOut << 9))
#endif

/*--------------------------------------------------------------
 *  RHEA_INITAPI()
 *--------------------------------------------------------------
 * Parameters :wsH wait states when freq high, wsL wait states
 *		when freq low
 * Return     :	none
 * Functionality :Initialize the API control register
 *--------------------------------------------------------------*/

#define RHEA_INITAPI(wsH, wsL) (* (SYS_UWORD16 *) MEM_API_CNTL = ((wsH) | (wsL) << 5))

/*--------------------------------------------------------------
 *  RHEA_INITARM()
 *--------------------------------------------------------------
 * Parameters : Wen0 write enable domain strb0
 *		Wen1 write enable domain strb1
 * Return     :	none
 * Functionality :Initialize the ARM RHEA control register
 *--------------------------------------------------------------*/

#define RHEA_INITARM(Wen0,Wen1) (* (SYS_UWORD16 *) MEM_ARM_RHEA = ((Wen0) | (Wen1) << 1))