FreeCalypso > hg > tcs211-l1-reconst
view gpf/BIN/runalltc.bat @ 56:b7046f3475b6
l1_cmplx.c: Cust_get_agc_from_IL() function prototype restored to TCS211 way
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Sun, 27 Mar 2016 06:27:29 +0000 |
parents | 509db1a7b7b8 |
children |
line wrap: on
line source
@echo off iff x%RUNALLTC_NO_SETLOCAL% == x then setlocal endiff loadbtm on rem --------------------------------------------------------------------------- rem Project : rem Modul : runalltc.bat rem --------------------------------------------------------------------------- rem Copyright 2002 Texas Instruments Berlin, AG rem All rights reserved. rem rem This file is confidential and a trade secret of Texas rem Instruments Berlin, AG rem The receipt of or possession of this file does not convey rem any rights to reproduce or disclose its contents or to rem manufacture, use, or sell anything it may describe, in rem whole, or in part, without the specific written consent of rem Texas Instruments Berlin, AG. rem --------------------------------------------------------------------------- rem Purpose : Runs all test cases belonging to a given test specification rem --------------------------------------------------------------------------- pushd if x%_4ver% == x goto Need4NT rem Check %PROST iff x%PROST == x then echo Which Protocol Stack shall be tested? echo set the environment variable PROST to the name of the stack. echo e.g. set PROST=gsm or set PROST=g23net will work goto end endiff iff %PROST == gprs then iff x%PS_EXE% == x then set rtc_psexe=%TESTROOT%\ms\bin\g23_smi_gprs.exe else set rtc_psexe=%PS_EXE% endiff elseiff %PROST == gsm then iff x%PS_EXE% == x then set rtc_psexe=%TESTROOT%\ms\bin\MS_TI_VC.exe else set rtc_psexe=%PS_EXE% endiff elseiff %PROST% == g23net .OR. %PROST% == g23n then iff x%PS_EXE% == x then set rtc_psexe=%TESTROOT%\bin\nucwin\g23net.exe else set rtc_psexe=%PS_EXE% endiff elseiff %PROST% == generic then iff x%PS_EXE% == x then set rtc_psexe=%TESTROOT%\bin\teststack.exe else set rtc_psexe=%PS_EXE% endiff else text Unknown project. Set environment variable PROST to gsm, gprs, g23net, or generic (i.e. use \GPF\initvars.bat). endtext goto end endiff set rtc_tcfailed=0 set ret_iboe=0 set tc_firsttc= set tc_lasttc= set rtc_tappara= set rtc_oldtappara=H set rtc_pspara=/INV set rtc_summary=0 set rtc_tee= set rtc_delay=5 set rtc_tapexe= set rtc_bindir=%GPF%/BIN set rtc_showtrc=0 set rtc_pcolog=1 set rtc_startstack=1 set rtc_starttst=1 set rtc_exitsoon=0 set rtc_testenv=unknown set rtc_allin1=0 set rtc_exec_suites=0 set rtc_exec_tc=1 set rtc_suifilehdl=-1 set rtc_doasif=0 set rtc_enti= set rtc_prefix= set rtc_rangeset=0 set rtc_blacklist= set rtc_retry=0 set rtc_try=0 set rtc_tap_exitcode= set rtc_tccount=0 set rtc_tc_executed= set rtc_echo= set rtc_case= set rtc_monthlist=Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec set rtc_enverror=Can't mix option -oe with -n, -b, -v, -e, -pcon, -oth, -notst, -wtmo, -stmo, -l, -ctb, -cr, -pref or -q :check_options rem Check Parameters if "x%1" == "x" goto How2Use iff "%1" == "-debug" then echo on shift 1 goto check_options elseiff "%1" == "-r" then if "x%2" == "x" (echo Missing range for "-r" & goto How2Use) set tc_dash=%@INDEX[%2,-] iff %tc_dash == -1 then set tc_firsttc=%2 set tc_lasttc=%2 else set tc_firsttc=%@INSTR[0,%tc_dash,%2] set tc_lasttc=%@SUBSTR[%2,%@eval[1+%tc_dash%]] endiff set rtc_rangeset=1 shift 2 goto check_options elseiff "%1" == "-t" then if "x%2" == "x" (echo Missing name of tap-exe for "-t" & goto How2Use) set rtc_tapexe=%2 shift 2 goto check_options elseiff "%1" == "-b" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new if "x%2" == "x" (echo Missing name of bin directory for "-b" & goto How2Use) set rtc_bindir=%2 shift 2 goto check_options elseiff "%1" == "-p" then if "x%2" == "x" (echo Missing name of ps-exe for "-p" & goto How2Use) set rtc_psexe=%2 shift 2 goto check_options elseiff "%1" == "-n" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_doasif=1 set rtc_testenv=new set rtc_pcolog=0 set rtc_tappara=%rtc_tappara% %1 -v set rtc_startstack=0 shift 1 goto check_options elseiff "%1" == "-q" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new set rtc_pcolog=0 shift 1 goto check_options elseiff "%1" == "-s" then set rtc_exec_suites=1 set rtc_exec_tc=0 shift 1 goto check_options elseiff "%1" == "+s" then set rtc_exec_suites=1 shift 1 goto check_options elseiff "%1" == "-st" then set rtc_oldtappara=T set rtc_showtrc=1 shift 1 goto check_options elseiff "%1" == "-sp" then set rtc_pspara= shift 1 goto check_options elseiff "%1" == "-ib" then set rtc_iboe=1 shift 1 goto check_options elseiff "%1" == "-e" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new if "x%2" == "x" (echo Missing name of entity for "-e" & goto How2Use) set rtc_tappara=%rtc_tappara% %1 %2 set rtc_enti=%2 shift 2 goto check_options elseiff "%1" == "-pref" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new if "x%2" == "x" (echo Missing prefix of entity for "-pref" & goto How2Use) set rtc_prefix=%2 shift 2 goto check_options elseiff "%1" == "-echo" then set rtc_echo=echo set rtc_startstack=0 set rtc_pcolog=0 set rtc_starttst=0 shift 1 goto check_options elseiff "%1" == "-pcon" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new set rtc_tappara=%rtc_tappara% -pcon shift 1 goto check_options elseiff "%1" == "-ctb" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new set rtc_tappara=%rtc_tappara% -ctb shift 1 goto check_options elseiff "%1" == "-cr" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new set rtc_tappara=%rtc_tappara% -cr shift 1 goto check_options elseiff "%1" == "-oth" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new set rtc_tappara=%rtc_tappara% -oth shift 1 goto check_options elseiff "%1" == "-v" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new set rtc_tappara=%rtc_tappara% -v shift 1 goto check_options elseiff "%1" == "-sum" then set rtc_summary=1 shift 1 goto check_options elseiff "%1" == "-notst" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_starttst=0 shift 1 goto check_options elseiff "%1" == "-nop" then set rtc_startstack=0 shift 1 goto check_options elseiff "%1" == "-d" then if "x%2" == "x" (echo Missing delay for "-d" & goto How2Use) set rtc_delay=%2 shift 2 goto check_options elseiff "%1" == "-c" then if "x%2" == "x" (echo Missing name for "-c" & goto How2Use) set rtc_case=%2 shift 2 goto check_options elseiff "%1" == "-retry" then if "x%2" == "x" (echo Missing repetitions for "-retry" & goto How2Use) set rtc_retry=%2 shift 2 goto check_options elseiff "%1" == "-stmo" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new if "x%2" == "x" (echo Missing timeout for "-stmo" & goto How2Use) set rtc_tappara=%rtc_tappara% -tsync %@eval[%2*1000] shift 2 goto check_options elseiff "%1" == "-l" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new if "x%2" == "x" (echo Missing ccddata_dll for "-l" & goto How2Use) if NOT exist %2 (echo %2 not found & goto end) set rtc_tappara=%rtc_tappara% -l %@FULL[%2] shift 2 goto check_options elseiff "%1" == "-wtmo" then iff %rtc_testenv% == old then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=new if "x%2" == "x" (echo Missing timeout for "-wtmo" & goto How2Use) set rtc_tappara=%rtc_tappara% -t %@eval[%2*1000] shift 2 goto check_options elseiff "%1" == "-tp" then shift :tap_param iff x"%1" == x"" then goto How2use elseiff "%1" == "--" then shift goto check_options else set rtc_tappara=%rtc_tappara% %1 shift goto tap_param endiff elseiff "%1" == "-oe" then iff %rtc_testenv% == new then echo Error: %rtc_enverror% goto How2Use endiff set rtc_testenv=old shift 1 goto check_options elseiff "%1" == "-xf" then if "x%2" == "x" (echo Missing file for "-xf" & goto How2Use) set rtc_blacklist=%2 shift 2 goto check_options endiff iff %rtc_testenv% == unknown then iff "x%rtc_tapexe%" == "x" then iff exist %GPF%\BIN\tap2_%PROST%.exe then set rtc_tapexe=%GPF%\BIN\tap2_%PROST%.exe set rtc_testenv=old else set rtc_tapexe=tap2.exe set rtc_testenv=new endiff else iff %@INDEX[%rtc_tapexe%,%PROST%] == -1 then set rtc_testenv=new else set rtc_testenv=old endiff endiff echo Guess %rtc_testenv test environment else iff %rtc_testenv% == new then iff "x%rtc_tapexe%" == "x" then set rtc_tapexe=tap2.exe endiff else iff "x%rtc_tapexe%" == "x" then set rtc_tapexe=%GPF%\BIN\tap2_%PROST%.exe endiff endiff echo Use %rtc_testenv test environment endiff iff %rtc_testenv% == new .AND. %rtc_showtrc == 1 then echo Option -st is not supported in this version for new test environment set rtc_showtrc=0 endiff if "%@INSTR[0,1,%1]" == "-" goto unknown_option if %#% GT 1 goto How2Use set rtc_localdir=%_CWD if %rtc_testenv% == new cdd %rtc_bindir% iff NOT exist %rtc_tapexe% then echo %rtc_tapexe%: not found goto end endiff iff NOT exist %rtc_psexe% .AND. %rtc_startstack% != 0 then echo %rtc_psexe%: not found goto end endiff set rtc_psexe=%@FULL[%rtc_psexe%] set ENTI=%1 if x"%rtc_enti%" == x"" set rtc_enti=%ENTI% if x"%rtc_prefix%" == x"" set rtc_prefix=%ENTI% rem Stack-Specifics iff "x%TCDIR%" == "x" then iff "%PROST" == "WARP" then set TCDIR=%BINDIR% else set TCDIR=%TESTROOT%\%SIDE%\TEST endiff endiff %TESTDRIVE% rem check if test case directory is substructured iff "x%TCNOTSUBSTRUCT" == "x" then set TESTDLLDIR=%TCDIR%\%ENTI%_test iff NOT exist %TESTDLLDIR%\*.dll then set TESTDLLDIR=%TCDIR%\TEST_%ENTI% endiff else set TESTDLLDIR=%TCDIR% endiff iff NOT exist %TESTDLLDIR% then echo %TESTDLLDIR% does not exist goto end endiff rem check for blacklist iff "x%rtc_blacklist%" != "x" then iff %@INSTR[0,1,%rtc_blacklist%] == \ .OR. %@INSTR[1,1,%rtc_blacklist%] == : then iff exist %rtc_blacklist% then set rtc_blacklist=%@FULL["%rtc_blacklist%"] else echo Cannot open %rtc_blacklist% goto end endiff elseiff %@INDEX[%rtc_blacklist%,\] != -1 then iff exist %rtc_localdir%\%rtc_blacklist% then set rtc_blacklist=%rtc_localdir%\%rtc_blacklist% else echo Cannot open %rtc_blacklist% goto end endiff else iff exist %rtc_localdir%\%rtc_blacklist% then set rtc_blacklist=%rtc_localdir%\%rtc_blacklist% elseiff exist %TESTDLLDIR%\%rtc_blacklist% then set rtc_blacklist=%TESTDLLDIR%\%rtc_blacklist% elseiff exist %TCDIR%\%rtc_blacklist% then set rtc_blacklist=%TCDIR%\%rtc_blacklist% else echo Cannot open %rtc_blacklist% goto end endiff endiff endiff iff %rtc_testenv% == new then set rtc_tappara=%rtc_tappara% -tb %ENTI% set tcerr=TEST_TAP.prt else cdd %TESTDLLDIR% set tcerr=Test_%ENTI%.prt endiff iff NOT exist %TESTDLLDIR%\*.dll then echo no testcases in %TESTDLLDIR% goto end endiff set grep=%GPF%\tools\bin\grep.exe iff NOT exist %grep% then echo You need %grep% to execute runalltc goto end endiff set clickbtn=%GPF%\BIN\clickbtn.exe iff NOT exist %clickbtn% then echo You need %clickbtn% to execute runalltc goto end endiff iff exist %TESTDLLDIR%\%ENTI%.dll .AND. %rtc_exec_tc% == 1 then set rtc_allin1=1 set gawk=%GPF%\tools\bin\gawk.exe iff NOT exist %gawk% then echo You need %gawk% to run allin1 tests goto end endiff set dumpbin=%@SEARCH[dumpbin.exe] iff NOT exist %dumpbin% then echo You need dumpbin.exe to run allin1 tests goto end endiff set rtc_expfile=%TESTDLLDIR%\%ENTI%_exp.txt "%dumpbin%" /EXPORTS %TESTDLLDIR%\%ENTI%.dll | %gawk% "/ +[0-9]+ +[0-9A-F]+ [0-9A-F]+ %@UPPER[%rtc_prefix%]/ {print $4}" > %rtc_expfile% endiff iff %rtc_exec_suites% == 1 .AND. %rtc_allin1% != 1 then set gawk=%GPF%\tools\bin\gawk.exe iff NOT exist %gawk% then echo You need %gawk% to run suites goto end endiff endiff rem Check ranges iff %rtc_exec_tc% == 1 then iff %rtc_allin1% == 1 then set rtc_filehdl=%@FILEOPEN[%rtc_expfile%,read] set tc_exmp=%@FILEREAD[%rtc_filehdl%] set tcase=%tc_exmp else set tc_exmp_=%@FINDFIRST[%TESTDLLDIR%\*.dll] set tc_exmp=%@NAME[%tc_exmp_] set tc_exmp_=%@FINDCLOSE[%TESTDLLDIR%\*.dll] endiff set tc_ords=%@SUBSTR[%tc_exmp,%@LEN[%rtc_prefix%]] set tc_len=%@LEN[%tc_ords] if %@NUMERIC[%tc_ords] == 0 set tc_len=%@DEC[%tc_len%] iff x%tc_firsttc% == x then iff %tc_len% == 5 then set tc_firsttc=00000 elseiff %tc_len% == 4 then set tc_firsttc=0000 else set tc_firsttc=000 endiff else set tc_len_=%@LEN[%tc_firsttc] if %@NUMERIC[%tc_firsttc] == 0 set tc_len_=%@DEC[%tc_len_%] if %tc_len != %tc_len_ echo Warning: your range "%tc_firsttc" is ambigious (there are not only %tc_len_%-digit test cases) endiff iff x%tc_lasttc == x then iff %tc_len% == 5 then set tc_lasttc=99999Z elseiff %tc_len% == 4 then set tc_lasttc=9999Z else set tc_lasttc=999Z endiff else set tc_len_=%@LEN[%tc_lasttc] if %@NUMERIC[%tc_lasttc] == 0 set tc_len_=%@DEC[%tc_len_%] if %tc_len != %tc_len_ echo Warning: your range "%tc_lasttc" is ambigious (there are not only %tc_len_%-digit test cases) endiff endiff iff %rtc_summary% == 1 then set rtc_sumfile=%@FULL[%ENTI%.txt] echo Start testing of %ENTI% on %@WORD[%@DEC[%_MONTH],%rtc_monthlist%] %_DAY% %_YEAR% at %_TIME >%rtc_sumfile% set rtc_tee=%=|tee /a %rtc_sumfile% endiff on break gosub on_break iff %rtc_exec_suites% == 1 .AND. not exist %TESTDLLDIR%\%ENTI%.sui then echo No suites file %TESTDLLDIR%\%ENTI%.sui set rtc_exec_suites=0 if %rtc_exec_tc% == 0 goto end endiff iff %rtc_testenv% == new .AND. %rtc_starttst == 1 then start /MIN tst sim delay 2 iff %rtc_pcolog% == 1 then start /MIN /LOW pco_srv delay 2 else set rtc_showtrc=0 endiff rem iff %rtc_showtrc% == 1 then rem start /LOW pco_view.exe rem endiff endiff iff x"%rtc_case" != x"" then set tcase=%rtc_case% gosub run_test goto epilogue endiff iff %rtc_exec_tc% == 1 then iff %rtc_allin1% == 1 then do while %tcase% != **EOF** gosub run_test iff %rtc_tcfailed% == 1 then echo Testcase failed: exiting. goto end endiff iff %rtc_tap_exitcode% == 8 .AND. %rtc_retry% != 0 then set rtc_try=%@INC[%rtc_try%] if %rtc_try% LE %rtc_retry% ITERATE iff %rtc_tccount% == 0 then echo Stack synchronization error on 1. test case in %rtc_try% retries - giving up %rtc_tee% goto epilogue endiff endiff if %rtc_exitsoon% == 1 goto epilogue set tcase=%@FILEREAD[%rtc_filehdl%] set rtc_try=0 if %rtc_tc_executed% == 1 set rtc_tccount=%@INC[%rtc_tccount%] enddo else FOR %tcase IN (%TESTDLLDIR%\*.dll) do ( gosub run_test iff %rtc_tcfailed% == 1 then echo Testcase failed: exiting. goto end endiff if %rtc_exitsoon% == 1 goto epilogue ) endiff endiff iff %rtc_exec_suites% == 1 then set rtc_suilist=%TESTDLLDIR%\%ENTI%_sui_list.txt set sed=%GPF%\tools\bin\sed.exe iff NOT exist %sed% then echo You need %sed% to execute suites with runalltc goto end endiff gosub mk_sui_list iff %@FILESIZE[%rtc_suilist%,b] == 0 then echo No suites in %TESTDLLDIR%\%ENTI%.sui goto epilogue endiff set rtc_suifilehdl=%@FILEOPEN[%rtc_suilist%,read] set tcase=#%@FILEREAD[%rtc_suifilehdl%] do while %tcase% != #**EOF** gosub run_test if %rtc_exitsoon% == 1 goto epilogue set tcase=#%@FILEREAD[%rtc_suifilehdl%] enddo endiff goto epilogue :mk_sui_list %grep% "SUI_.*:" %TESTDLLDIR%\%ENTI%.sui | %sed% -e "s/\(SUI_[a-zA-Z0-9_]*\):/\1/g" | %gawk% -- " /SUI_/ {print $1 } " > %rtc_suilist% return :epilogue iff %rtc_testenv% == new then iff %rtc_pcolog% == 1 then pcoc exit > nul delay 2 pkill pco_srv > nul rem pkill pco_view > nul endiff if %rtc_starttst == 1 pkill tst > nul iff %rtc_summary% == 1 then echo End testing of %ENTI% on %@WORD[%@DEC[%_MONTH],%rtc_monthlist%] %_DAY% %_YEAR% at %_TIME >>%rtc_sumfile% move /q %rtc_sumfile% %TESTDLLDIR% endiff iff %rtc_allin1% == 1 then set rtc_filehdl=%@FILECLOSE[%rtc_filehdl%] del /q %rtc_expfile% endiff iff %rtc_exec_suites% == 1 then if %rtc_suifilehdl% != -1 set rtc_suifilehdl=%@FILECLOSE[%rtc_suifilehdl%] del /q %rtc_suilist% endiff endiff goto end :run_test iff %@INSTR[0,1,%tcase%] == # then set rtc_issuite=# set tcase=%@SUBSTR[%tcase%,1] else set rtc_issuite= endiff set tcname=%@NAME[%tcase] set tc_ords=%@SUBSTR[%tcname,%@LEN[%rtc_prefix%]] iff %rtc_rangeset% == 0 then set rtc_inrange=1 else iff %tc_ords% GE %tc_firsttc% .AND. %tc_ords% LE %tc_lasttc% then set rtc_inrange=1 else set rtc_inrange=0 endiff iff %rtc_inrange% == 1 .AND. "x%rtc_blacklist%" != "x" then %grep% -w %tcname% %rtc_blacklist% > nul iff %? == 0 then set rtc_inrange=0 echo Test case %tcname% excluded by %rtc_blacklist% %rtc_tee% endiff endiff set rtc_tc_executed=0 iff x%rtc_issuite% == x# .OR. %rtc_inrange == 1 then iff x"%rtc_echo%" == x"" .AND. not exist %TESTDLLDIR%\%tcname% then mkdir %TESTDLLDIR%\%tcname% endiff iff %rtc_testenv% == new then rem start /MIN tst sim rem delay 2 iff %rtc_pcolog% == 1 then pcoc spath %TESTDLLDIR%\%tcname% > nul pcoc start %tcname% > nul endiff rem iff %rtc_showtrc% == 1 then rem start /LOW pco_view.exe rem delay 2 rem endiff else cd %tcname% endiff iff %rtc_startstack% == 1 then start %rtc_pspara% %rtc_psexe% delay %rtc_delay% endiff iff %rtc_testenv% == new then iff "%rtc_doasif%" == "1" then %rtc_echo% %rtc_tapexe% %rtc_tappara% %TESTDLLDIR% %rtc_issuite%%tcname > %TESTDLLDIR%\%tcname%\%ENTI%.dbg else %rtc_echo% %rtc_tapexe% %rtc_tappara% %TESTDLLDIR% %rtc_issuite%%tcname endiff else %rtc_tapexe% Test 1 2 N %enti %TESTDLLDIR% %rtc_issuite%%tcname %rtc_oldtappara% endiff iff x"%rtc_echo%" == x"" then set rtc_tap_exitcode=%? set rtc_tc_executed=1 if %rtc_tap_exitcode% != 0 .AND. %rtc_iboe% == 1 set rtc_tcfailed=1 iff exist %ENTI%.dbg then move /q %ENTI%.dbg %TESTDLLDIR%\%tcname% endiff iff exist %TESTDLLDIR%\%tcerr% then move /q %TESTDLLDIR%\%tcerr% %TESTDLLDIR%\%tcname% rem Check for stack sync error (exit code 8) iff %rtc_tap_exitcode% != 8 .OR. %rtc_try% == %rtc_retry% then %grep% -i %tcname% %TESTDLLDIR%\%tcname%\%tcerr% %rtc_tee% endiff endiff endiff if %rtc_tcfailed% == 1 return iff %rtc_startstack% == 1 then %clickbtn% "%@FILENAME[%rtc_psexe%] - Application Error" OK > nul iff %? == 0 then echo Testcase %tcname% Failed: %rtc_psexe% crashed. %rtc_tee% else pkill %@NAME[%rtc_psexe%] > nul endiff endiff iff %rtc_testenv% == new then rem kill p TST RCV EXTR > nul rem kill q PQTST STQTST PQRCV STQRCV > nul rem pkill tst > nul rem delay 1 iff %rtc_pcolog% == 1 then pcoc stop > nul endiff rem iff %rtc_showtrc% == 1 then rem kill r data_ > nul rem pkill pco_view > nul rem endiff rem delay 1 else cd .. endiff endiff return :on_break set rtc_exitsoon=1 Echo Will exit after the next test case return :Need4NT echo "Error: 4DOS or 4NT is needed goto end :unknown_option echo Unknown Option: %1 :How2Use text runalltc : Run test cases Usage : runalltc [-r [<first>]-[<last>]] [-p <ps_exe>] [-t <tap_exe>] [-sp] [-st] [-sum] [-d <delay_time>] [-b <dir>] [-v] [-pcon] [-q] [-e <entity>] [-notst] [-wtmo <time>] [-stmo <time>] [-ib] [-n] [-l <ccddata>] [-ctb] [-tp ... --] [-c <tcase>] [-xf <file>] [-pref <prefix>] [-retry <#retries>] testname Example : runalltc GMM - runs all existing test cases for GMM with -r : run range from <first> to <last> with +s : run all test cases including suites with -s : run (only) all suites with -p : take <ps_exe> as protocol stack with -t : take <tap_exe> as tap with -tp --: pass all options between -tp and -- to tap with -nop : don't start protocol stack with -notst: don't start tst.exe with -sp : show window of protocol stack (default: don't show) with -st : show trace windows (default: don't show) with -sum : write summary for each test case in <testname>.txt with -wtmo : set Tap's default wait timeout to <time> seconds with -stmo : set Tap's initial synchronization timeout to <time> seconds with -d : set <delay_time> (in seconds) after protocal stack starting with -b : set <dir> as directory for binaries to start with -v : let Tap be verbose on execution with -n : let Tap only should what should happen without executing test case with -l : load <ccddata> instead of the default one with -pcon : use pcon for primitive conversion with -ctb : let Tap enable common timer base with -cr : let Tap check ranges of base type with -oth : let Tap configure TST to use the old header format with -e : set <entity> name; necessary e.g. for suites with -q : quick execution: don't log with pco with -ib : immediate break on error (without stopping anything, e.g. stack) with -oe : use old frame test environment with -c : execute only test case <tcase> with -xf : don't execute test cases that are listed in <file> with -pref : testcase names are named <prefix> + number with -retry: set number of retries for stack synchronization error endtext :end iff x%RUNALLTC_NO_SETLOCAL% == x then endlocal endiff popd