FreeCalypso > hg > tcs211-l1-reconst
view gpf/CCD/util/readme.txt @ 118:eddfcbdc0225
copyblobs.sh script written
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 09 Apr 2016 05:21:38 +0000 |
parents | 509db1a7b7b8 |
children |
line wrap: on
line source
Tools supporting CCD stack size calculation =========================================== 1. ccd_stacksize.exe -------------------- If gnumake is called in \gpf\CCD\util, an executable ccd_stacksize.exe is created. This programm prints the needed stacksize for encoding respectively decoding each message defined in the actual ccddata_dll.dll. In addition the recursion level (level of substructures) is printed. With gnumake configuration parameters can be supplied, depending on which CCD variant is to be used. MEMSUPER, TRACE, and DEBUG are possible parameters, e.g. gnumake MEMSUPER=1 DEBUG=1 TRACE=0 creates a ccd_stacksize.exe for a CCD compiled with partition supervision, debug information, but without tracing functionality. Supported platforms are arm7 and arm9, default is arm7. With the configuration parameter PLATFORM=arm9 the corresponding version for the arm9 is created. The output of ccd_stacksize.exe looks like this: MSG ENC DEC REC-LEVEL ========================================================== MS_RF_CAPABILITY 532 512 4 U_ALERT 356 404 2 [ ... more output lines ...] MOD_PDP_ACC 152 116 0 SM_STATUS 348 320 2 That means e.g. that for encoding a U_ALERT message, 356 bytes of stack is needed. With ccd_stacksize -api a list of the remaining, non message related functions of CCD and their needed amout of stack is printed: ccd_init 64 ccd_exit 40 ccd_begin 32 ccd_end 32 [ ... more output lines ...] In the current version the stack needed for calling frame functions are not yet considered. 2. globs.bat ------------ For those entities that require a reentrant CCD (GRR in GPRS; RRC and RCM in UMTS) an own set of CCD internal data is needed. It was required by REDMEM to particularly distinguish between GSM only and GPRS (i.e. without/with GRR on the arm7). Therefore the block of internal CCD data for GRR is no longer statically declared. Instead CCD finds out if GRR calls ccd_init and tries then to dynamically allocate the memory for the data. That implies, that a big enough partition in xxxconst.h must be supplied. The batch file globs.bat calculates the amount of memory needed for one set of CCD internal data in several configurations. The actual values for CCD_2.6.0 are: - for a non-tracing CCD on ARM7: 1600 - for a tracing CCD on ARM7: 1656 - for a non-tracing CCD on ARM9: 1604 - for a tracing CCD on ARM9: 1740 - for a non-tracing CCD on PC: 2634 - for a tracing CCD on PC: 2771 That means e.g. for a GPRS arm7 target version, a data partition of 1600/1656 bytes must be available.