FreeCalypso > hg > tcs211-l1-reconst
view chipsetsw/riviera/rvt/ti_profiler/ti_profiler.h @ 349:ed3e588600c1 default tip
README update for the successful completion of the L1 reconstruction project
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 30 Oct 2017 18:03:24 +0000 |
parents | 509db1a7b7b8 |
children |
line wrap: on
line source
/************************************************************************************ * ti_profiler.h : contains ti profiling and Nucleus Monitoring module header * * * * * * Author: Philippe Martinez * * * * version: 1.1 * * * * Date: 07/16/2001 * * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved * ************************************************************************************/ #ifndef _TI_PROFILER_H_ #define _TI_PROFILER_H_ #define INFINITE_LOOP ( 1 ) #define L1_TRACER ( 1 ) // Add debug traces into Layer 1 stream // Log buffer size in 32 bit words (profiler only) #define PR_BUFFER_SIZE ( 20000 ) #define PR_BUFFER_THRESHOLD ( PR_BUFFER_SIZE - 95 ) // buffer OP code (profiler only) #define C_OP_CODE_START_PR ( 0xfffffff0 ) #define C_OP_CODE_STOP_PR ( 0xfffffffe ) #define C_OP_CODE_BEGIN_BUFFER ( 0xfffffff0 ) #define C_OP_CODE_TDMA_BEGIN ( 0xfffffff2 ) #define C_OP_CODE_TDMA_END ( 0xfffffff4 ) #define C_OP_CODE_END_BUFFER ( 0xfffffff8 ) // Rx message ID code (profiler only) #define TI_PROFILER_END_PROFILING ( 0x0000 ) #define TI_PROFILER_START_PROFILING ( 0x0001 ) #define TI_PROFILER_OUTPUT_BUFFER ( 0xffff ) // Timer used (profiler only) #define PR_TIMER_NUM ( 1 ) #define PR_TIMER_RESET_VALUE ( 21 ) // load value 50 us // define the length of cutted element buffer in order to // Generate rvt messages. (profiler only) #define TRACE_MESSAGE_SIZE ( 50 ) // x4 = n bytes // Nucleus monitoring buffer size (bytes) for rvt (Nucleus Monitoring only) #define NUC_MONITOR_BUFFER_SIZE ( 240 ) // Nucleus Monitoring Buffer (Nucleus Monitoring only) #define C_OP_CODE_NUC_MON_THREAD_IDS ( 0xff ) #define C_OP_CODE_FN_LOG ( 0x00 ) #define C_OP_CODE_LISR_FLAG ( 0xC0 ) #define C_OP_CODE_THREAD_FLAG ( 0x80 ) #define C_OP_CODE_QUEUE_FLAG ( 0x40 ) // Rx message ID code (Nucleus Monitoring only) #define TI_NUC_MONITOR_OUTPUT_BUFFER ( 0xfff0 ) #define TI_NUC_MONITOR_START ( 0x0002 ) #define TI_NUC_MONITOR_STOP ( 0x0003 ) // ID Thread NULL (Nucleus Monitoring only) #define NUC_MONITOR_ID_IDLE ( 0xff ) // Nuleus monitoring : Number max of component of same type // that can be monitored (Nucleus Monitoring only) #define NUC_MONITOR_MAX_ID ( 64 ) // Define LISR doubled buffer Size (Nucleus Monitoring only) #define C_NUC_LISR_BUF_PG_NB ( 2 ) #define C_NUC_LISR_LOG_SZ ( 5 ) // bytes // Must be strickly < NUC_MONITOR_BUFFER_SIZE (Nucleus Monitoring only) #define C_NUC_MAX_LISR ( 20 * C_NUC_LISR_LOG_SZ ) // Define LISR doubled buffer Size (Nucleus Monitoring only) #define C_NUC_THREAD_BUF_PG_NB ( 2 ) #define C_NUC_THREAD_LOG_SZ ( 3 ) // bytes // Must be strickly < NUC_MONITOR_BUFFER_SIZE (Nucleus Monitoring only) #define C_NUC_MAX_THREAD ( 30 * C_NUC_THREAD_LOG_SZ ) // Differents state of profiling typedef enum { PROFILER_STOPPED, PROFILER_RUNNING, PROFILER_FREEZED, PROFILER_TO_BE_RAN, PROFILER_TO_BE_UNFREEZED, PROFILER_TO_BE_STOPPED } T_PROFILER_STATE; // Differents state of nucleus monitoring (Nucleus Monitoring only) typedef enum { NUC_MONITOR_STOPPED, NUC_MONITOR_RUNNING, NUC_MONITOR_TO_BE_RUN, NUC_MONITOR_TO_BE_STARTED, NUC_MONITOR_TO_BE_STOP, NUC_MONITOR_WAITING } T_NUC_MONITOR_STATE; typedef enum { LOGGING, FLUSH } T_PROFILER_BUFFER_STATE; typedef enum { NOT_ACTIVE, ACTIVE_BY_TI, ACTIVE_BY_EXT, ACTIVE_BY_HOST } T_PROFILER_HANDLER; typedef enum { NO_EVENT, NO_SLEEP_EVENT, EVENT2, EVENT3, EVENT4 } T_PROFILER_EVENTS; typedef struct { SYS_UWORD16 msg_id; SYS_UWORD8 event_number; SYS_UWORD8 arg1; SYS_UWORD8 *p_buffer; SYS_UWORD8 buffer_size; } T_PROFILER_MSG_UART; typedef struct { T_RV_HDR header; SYS_UWORD16 msg_id; SYS_UWORD8 event_number; SYS_UWORD8 arg1; SYS_UWORD8 *p_buffer; SYS_UWORD8 buffer_size; } T_PROFILER_MSG; #endif