changeset 32:1bec6419cd32

l1_afunc.c pulled from LoCosto, compiles
author Mychaela Falconia <falcon@ivan.Harhan.ORG>
date Tue, 27 Oct 2015 23:41:22 +0000
parents c7df31a89935
children 5cb5e5f229e4
files chipsetsw/layer1/cfile/l1_afunc.c chipsetsw/layer1/include/l1_const.h
diffstat 2 files changed, 1173 insertions(+), 1 deletions(-) [+]
line wrap: on
line diff
--- a/chipsetsw/layer1/cfile/l1_afunc.c	Fri Oct 23 01:26:37 2015 +0000
+++ b/chipsetsw/layer1/cfile/l1_afunc.c	Tue Oct 27 23:41:22 2015 +0000
@@ -1,1 +1,1166 @@
-/* dummy C source file */
+/************* Revision Controle System Header *************
+ *                  GSM Layer 1 software 
+ * L1_AFUNC.C
+ *
+ *        Filename l1_afunc.c
+ *  Copyright 2003 (C) Texas Instruments
+ *
+ ************* Revision Controle System Header *************/
+
+#define  L1_AFUNC_C
+
+#include "l1_macro.h"
+#include "l1_confg.h"
+
+#if (CODE_VERSION == SIMULATION)
+  #include <string.h>
+  #include "l1_types.h"
+  #include "sys_types.h"
+  #include "l1_const.h"
+  #include "l1_signa.h"
+  #if TESTMODE
+    #include "l1tm_defty.h"
+  #endif
+  #if (AUDIO_TASK == 1)
+    #include "l1audio_const.h"
+    #include "l1audio_cust.h"
+    #include "l1audio_defty.h"
+  #endif  
+  #if (L1_GTT == 1)
+    #include "l1gtt_const.h"
+    #include "l1gtt_defty.h"
+  #endif
+  #if (L1_MIDI == 1)
+    #include "l1midi_defty.h"
+  #endif
+  #if (L1_MP3 == 1)
+    #include "l1mp3_defty.h"
+  #endif
+//ADDED FOR AAC
+  #if (L1_AAC == 1)
+    #include "l1aac_defty.h"
+  #endif
+  #include "l1_defty.h"
+  #include "cust_os.h"
+  #include "l1_msgty.h"
+  #include "l1_varex.h"
+  #include "l1_proto.h"
+  #include "l1_tabs.h"
+  #include "l1_time.h"
+  #if L1_GPRS
+    #include "l1p_cons.h"
+    #include "l1p_msgt.h"
+    #include "l1p_deft.h"
+    #include "l1p_vare.h"
+  #endif        
+#else
+  #include <string.h>
+  #include "l1_types.h"
+  #include "sys_types.h"
+  #include "l1_const.h"
+  #include "l1_signa.h"
+  #include "l1_time.h"
+
+  #if TESTMODE
+    #include "l1tm_defty.h"
+  #endif
+  #if (AUDIO_TASK == 1)
+    #include "l1audio_const.h"
+    #include "l1audio_cust.h"
+    #include "l1audio_defty.h"
+  #endif  
+  #if (L1_GTT == 1)
+    #include "l1gtt_const.h"
+    #include "l1gtt_defty.h"
+  #endif
+  #if (L1_MP3 == 1) 
+    #include "l1mp3_defty.h"
+  #endif
+  #if (L1_MIDI == 1)
+    #include "l1midi_defty.h"
+  #endif
+//ADDED FOR AAC
+  #if (L1_AAC == 1)
+    #include "l1aac_defty.h"
+  #endif
+  #include "l1_defty.h"
+  #include "cust_os.h"
+  #include "l1_msgty.h"
+  #include "l1_varex.h"
+  #include "l1_proto.h"
+  #include "l1_tabs.h"
+  #if L1_GPRS
+    #include "l1p_cons.h"
+    #include "l1p_msgt.h"
+    #include "l1p_deft.h"
+    #include "l1p_vare.h"
+  #endif
+#if (GSM_IDLE_RAM > 1)
+#if (OP_L1_STANDALONE == 1)
+  #include "csmi_simul.h"
+#else
+#include "csmi/csmi.h"
+#endif
+#endif
+#endif
+
+
+#if (OP_L1_STANDALONE == 1)
+#if (ANLG_FAM == 11)
+#include "bspTwl3029_Madc.h"
+#endif
+#endif
+
+#if (L1_MADC_ON == 1)
+#if (OP_L1_STANDALONE == 1)
+#if (RF_FAM == 61)
+#include "drp_api.h"
+#include "l1_rf61.h"
+#include <string.h>
+extern T_DRP_SRM_API* drp_srm_api;
+#endif
+#if (ANLG_FAM == 11)
+BspTwl3029_MadcResults l1_madc_results;
+void l1a_madc_callback(void);
+#endif
+#endif
+#endif //L1_MADC_ON
+
+
+
+/*-------------------------------------------------------*/
+/* l1a_reset_ba_list()                                   */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* This function resets the BA list content.             */
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_reset_ba_list()
+{
+  UWORD8 i;
+ 
+  // Rem: this reset function do not touch the "ba_id", "nbr_carrier" and 
+  //      "radio_freq" fields.
+
+  //!!! remove this initialization when BA list handling changed for dedic mode
+  if(l1a_l1s_com.mode != I_MODE)
+  {
+    l1a_l1s_com.ba_list.next_to_ctrl = 0;         // Carrier for next power measurement control.
+    l1a_l1s_com.ba_list.next_to_read = 0;         // Carrier for next power measurement result.
+    l1a_l1s_com.ba_list.first_index  = 0;       // First BA index measured in current session.
+  }
+
+  // Reset of "ms_ctrl, ms_ctrl_d, msctrl_dd" is done at L1 startup 
+  // and when SYNCHRO task is executed.
+ 
+  l1a_l1s_com.ba_list.np_ctrl      = 0;         // PCH burst number.
+    
+
+  for(i=0; i<C_BA_PM_MEAS; i++)                            // 2 measurements / PCH frame...
+  {
+    l1a_l1s_com.ba_list.used_il   [i] = l1_config.params.il_min; // IL used in CTRL phase for AGC setting.  
+    l1a_l1s_com.ba_list.used_il_d [i] = l1_config.params.il_min; // ... 1 frame delay.
+    l1a_l1s_com.ba_list.used_il_dd[i] = l1_config.params.il_min; // ... 2 frames delay, used in READ phase.
+
+    l1a_l1s_com.ba_list.used_lna   [i] = FALSE; // LNA used in CTRL phase for AGC setting.  
+    l1a_l1s_com.ba_list.used_lna_d [i] = FALSE; // ... 1 frame delay.
+    l1a_l1s_com.ba_list.used_lna_dd[i] = FALSE; // ... 2 frames delay, used in READ phase.
+  }
+  
+  for(i=0; i<32+1; i++)
+  {
+    l1a_l1s_com.ba_list.A[i].acc   = 0;         // Reset IL accumulation.
+  }
+} 
+
+/*-------------------------------------------------------*/
+/* l1a_reset_full_list()                                 */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* This function resets the FULL list content.           */
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_reset_full_list()
+{
+  UWORD16 i;
+
+  // Init power measurement multi_session process
+  l1a_l1s_com.full_list.meas_1st_pass_ctrl   = 1;     // Set 1st pass flag for power measurement session in ctrl.
+  l1a_l1s_com.full_list.meas_1st_pass_read   = 1;     // Set 1st pass flag for power measurement session in read.
+  l1a_l1s_com.full_list.nbr_sat_carrier_ctrl = 0;     // Clear number of saturated carrier in ctrl.
+  l1a_l1s_com.full_list.nbr_sat_carrier_read = 0;     // Clear number of saturated carrier in read.
+                                            
+  // Set global parameters for full list measurement.
+  l1a_l1s_com.full_list.next_to_ctrl = 0;             // Set next carrier to control to 1st one.
+  l1a_l1s_com.full_list.next_to_read = 0;             // Set next carrier to control to 1st one.
+
+  // Reset Pipeline
+  // Note: l1a_l1s_com.full_list.ms_ctrl_d is reset at the end of l1_meas_manager()
+  l1a_l1s_com.full_list.ms_ctrl_dd = 0;
+  l1a_l1s_com.full_list.ms_ctrl_d  = 0;
+
+  // Reset the FULL LIST.
+  #if (L1_FF_MULTIBAND == 0)
+    for(i=0; i<l1_config.std.nbmax_carrier; i++)
+  #else
+    for(i=0; i< NBMAX_CARRIER; i++)
+  #endif
+  {
+    l1a_l1s_com.full_list.sat_flag[i] = 0;       // Reset sat_flag
+  }
+
+  #if L1_GPRS
+    // Reset PPCH burst ctrl indication
+    l1pa_l1ps_com.cr_freq_list.pnp_ctrl = 0;
+  #endif
+}
+
+#if ((L1_EOTD == 1) && (L1_EOTD_QBIT_ACC == 1))
+/*-------------------------------------------------------*/
+/* l1a_add_time_delta()                                  */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* This function shifts a given cell timing (given as a  */
+/* couple [time_alignmt, fn_offset]) by adding           */
+/* a specified new time_alignmt offset (+ve or -ve       */
+/* between -4999 and +4999 qb)                           */
+/* to that timing.                                       */
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_add_time_delta(UWORD32 * time_alignmt, UWORD32 * fn_offset, WORD32 delta)
+{
+  WORD32  new_time_alignmt = *time_alignmt + delta;
+  UWORD32 new_fn_offset = *fn_offset;
+
+  if(new_time_alignmt < 0)
+  {
+    new_time_alignmt += TPU_CLOCK_RANGE;
+    new_fn_offset = (new_fn_offset + 1) % MAX_FN;
+  }
+  else if(new_time_alignmt >= TPU_CLOCK_RANGE)
+  {
+    new_time_alignmt -= TPU_CLOCK_RANGE;
+    new_fn_offset = (new_fn_offset - 1 + MAX_FN) % MAX_FN;
+  }
+
+  *time_alignmt = new_time_alignmt;
+  *fn_offset = new_fn_offset;
+}
+
+/*-------------------------------------------------------*/
+/* l1a_compensate_sync_ind()                             */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* Attempts to modify the time_alignmt and fn_offset   */
+/* fields of an MPHC_NCELL_SYNC_IND message based on     */
+/* E-OTD cross-correlation information in order to       */
+/* post-correct the result. This can be used to form a   */
+/* quater-bit alignment with slow drifting neighbours   */ 
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_compensate_sync_ind(T_MPHC_NCELL_SYNC_IND * msg)
+{
+
+  // This process can only be applied to SBCONF messages
+  // with good SCH decodes and valid EOTD results.
+  //
+  // a_eotd_crosscor  [0] [1] [2] [3] [4] [5] [6] [7] [8]
+  //
+  //                       <------ Peak Range ----->  
+  //
+  // As long as the cross-correlation peak lies in the range
+  // [1] to [7] then we can examine the slope of the correlation
+  // points on either side of the peak in order to perform a 
+  // positive or negative QB shift.
+
+  if((msg->sb_flag) && (msg->eotd_data_valid))
+  {
+    WORD16 peak_index  = msg->d_eotd_max - msg->d_eotd_first;
+
+    if((peak_index >= 1) && (peak_index <= 7))
+    {
+      UWORD32 a_power[9];
+      UWORD32 pre_power, post_power, thresh_power;
+      UWORD32 i;
+      WORD32  shift = 0;
+
+      // Calculate the normalised power of the cross-correlation samples
+      // in a_eotd_crosscor. This could be improved to only calculate
+      // the terms for [peak_index-1] [peak_index] [peak_index+1] if
+      // the algorithm proves viable in the long term.
+
+      // Normalised power[i] = real[i]^2 + imag[i]^2
+
+      for(i=0; i<9; ++i)
+      {
+        //
+        // Awkward looking code to square values as our compiler / assembler 
+        // gets the following construct wrong. Very strange... 
+        //
+        // UWORD32 real = ...
+        // real *= real;        <-- Assembler allocates registers incorrectly here
+        //
+        
+        UWORD32 real = msg->a_eotd_crosscor[2*i] * msg->a_eotd_crosscor[2*i];
+        UWORD32 imag = msg->a_eotd_crosscor[(2*i)+1] * msg->a_eotd_crosscor[(2*i)+1];
+
+        // Sum of the squares...
+
+        a_power[i] = real + imag;
+      }
+
+      // By inspection of practical examples, it appears that (peak power/3)
+      // is a good threshold on which to compare the shape of the slope.
+
+      thresh_power = a_power[peak_index] / 3;
+      pre_power    = a_power[peak_index-1]; 
+      post_power   = a_power[peak_index+1];
+ 
+      // Decision on whether the gradient of the slope of the crosscor points
+      // on either side of the peak is large enough to cause a (max) +/- 1QB shift
+      // to the time_alignmt field.
+
+      if( (pre_power < thresh_power) && (post_power > thresh_power) )
+      {
+        // Right skew on the cross corrrelation - shift time_alignmt 
+        // to be one greater
+
+        shift = 1;
+      }
+      else if ( (pre_power > thresh_power) && (post_power < thresh_power) )
+      {
+        // Left skew on the cross correlation - shift time_alignmt 
+        // to be one less
+
+        shift = -1;
+      }
+
+      l1a_add_time_delta( &(msg->time_alignmt),
+                          &(msg->fn_offset),
+                          shift );
+
+    }
+  }
+}
+#endif
+
+/*-------------------------------------------------------*/
+/* l1a_add_time_for_nb()                                 */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* This function shift a given cell timing (given as a   */
+/* couple [time_alignmt, fn_offset]) by adding           */
+/*             "SB_MARGIN - NB_MARGIN"                   */
+/* to that timing.                                       */
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_add_time_for_nb(UWORD32 *time_alignmt, UWORD32 *fn_offset)
+{
+  // Add "SB_MARGIN - NB_MARGIN" qbit to "fn_offset" and "time_alignmt".
+  // Pay attention to the modulos.
+
+  *time_alignmt += (SB_MARGIN - NB_MARGIN); 
+  if(*time_alignmt >= TPU_CLOCK_RANGE)
+  {
+    *time_alignmt -= TPU_CLOCK_RANGE;
+    *fn_offset     = (*fn_offset + MAX_FN - 1) % MAX_FN;
+  }
+}
+
+/*-------------------------------------------------------*/
+/* l1a_add_timeslot()                                    */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* This function shift a given cell timing (given as a   */
+/* couple [time_alignmt, fn_offset]) by adding a number  */
+/* of TIMESLOT (given as "tn") to that timing.           */
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_add_timeslot(UWORD32 *time_alignmt, UWORD32 *fn_offset, UWORD8 tn)
+{             
+  // Add "tn" timeslot to "fn_offset" and "time_alignmt".
+  // Pay attention to the modulos.
+  
+  *time_alignmt += tn * BP_DURATION;
+  if(*time_alignmt >= TPU_CLOCK_RANGE)
+  {
+    *time_alignmt -= TPU_CLOCK_RANGE;
+    *fn_offset     = (*fn_offset + MAX_FN - 1) % MAX_FN; 
+  }
+}
+
+/*-------------------------------------------------------*/
+/* l1a_sub_time_for_nb()                                 */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* This function shift a given cell timing (given as a   */
+/* couple [time_alignmt, fn_offset]) by substacting      */
+/*             "SB_MARGIN - NB_MARGIN"                   */
+/* to that timing.                                       */
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_sub_time_for_nb(UWORD32 *time_alignmt, UWORD32 *fn_offset)
+{
+  WORD32 new_time_alignmt;
+  
+  // Sub "SB_MARGIN - NB_MARGIN" qbit to "fn_offset" and "time_alignmt".
+  // Pay attention to the modulos.
+
+  new_time_alignmt = *time_alignmt - (SB_MARGIN - NB_MARGIN); 
+  if(new_time_alignmt < 0)
+  {
+    new_time_alignmt += TPU_CLOCK_RANGE;
+    *fn_offset        = (*fn_offset + 1) % MAX_FN; 
+  }
+  *time_alignmt = new_time_alignmt;
+}
+
+/*-------------------------------------------------------*/
+/* l1a_sub_timeslot()                                    */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/* This function shift a given cell timing (given as a   */
+/* couple [time_alignmt, fn_offset]) by substracting a   */
+/* number of TIMESLOT (given as "tn") to that timing.    */
+/*                                                       */
+/*-------------------------------------------------------*/
+void l1a_sub_timeslot(UWORD32 *time_alignmt, UWORD32 *fn_offset, UWORD8 tn)
+{             
+  WORD32 new_time_alignmt;
+
+  // Sub "tn" timeslot to "fn_offset" and "time_alignmt".
+  // Pay attention to the modulos.
+  new_time_alignmt = *time_alignmt - (tn * BP_DURATION);
+  if(new_time_alignmt < 0)
+  {
+    new_time_alignmt += TPU_CLOCK_RANGE;
+    *fn_offset        = (*fn_offset + 1) % MAX_FN; 
+  }
+  *time_alignmt = new_time_alignmt;
+}
+  
+/*-------------------------------------------------------*/
+/* l1a_correct_timing()                                  */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/*                                                       */
+/*-------------------------------------------------------*/
+#if (L1_12NEIGH == 1)
+void l1a_correct_timing (UWORD8 neigh_id,UWORD32 time_alignmt,UWORD32 fn_offset)
+{
+  // Save timing information in case of future handovers.
+  l1a_l1s_com.nsync.list[neigh_id].time_alignmt_mem = time_alignmt;
+  l1a_l1s_com.nsync.list[neigh_id].fn_offset_mem    = fn_offset;      
+
+  // Sub the serving cell timeslot number to the Neigh./Serving timing 
+  // difference to format it for L1S use.
+  l1a_sub_timeslot(&time_alignmt, &fn_offset, l1a_l1s_com.dl_tn);
+  l1a_sub_time_for_nb(&time_alignmt, &fn_offset);
+
+  // Save neighbor information in the neighbor confirmation cell structure.
+  l1a_l1s_com.nsync.list[neigh_id].time_alignmt = time_alignmt;
+  l1a_l1s_com.nsync.list[neigh_id].fn_offset    = fn_offset;
+}
+#endif
+
+/*-------------------------------------------------------*/
+/* l1a_compute_Eotd_data()                               */
+/*-------------------------------------------------------*/
+/*                                                       */
+/* Description:                                          */
+/* ------------                                          */
+/*                                                       */
+/*-------------------------------------------------------*/
+#if ((L1_12NEIGH ==1) && (L1_EOTD == 1))
+void l1a_compute_Eotd_data(  UWORD8 *first_scell, UWORD8 neigh_id, UWORD32 SignalCode, xSignalHeaderRec *msg)
+{
+  WORD32   ta_sb_neigh; 
+  UWORD32  fn_sb_neigh;
+  WORD16   d_eotd_first;
+  WORD32   toa_correction;
+  UWORD32  timetag;
+
+  // SB case .....
+  if (SignalCode == L1C_SB_INFO)
+  {
+    fn_sb_neigh = ((T_L1C_SB_INFO *)(msg->SigP))->fn_sb_neigh;
+    d_eotd_first= ((T_L1C_SB_INFO *)(msg->SigP))->d_eotd_first;
+    toa_correction = ((T_L1C_SB_INFO *)(msg->SigP))->toa_correction;
+  }
+  // SBCONF case .....
+  else 
+  {
+    fn_sb_neigh = ((T_L1C_SBCONF_INFO *)(msg->SigP))->fn_sb_neigh;
+    d_eotd_first= ((T_L1C_SBCONF_INFO *)(msg->SigP))->d_eotd_first;
+    toa_correction = ((T_L1C_SBCONF_INFO *)(msg->SigP))->toa_correction;
+  }
+
+  // compute the true Serving/Neighbor time difference.
+  //  1) update time_alignmt with (23bit - d_eotd_first) delta
+  //  2) Add the serving cell timeslot number to the Serving/Neighbor time difference.
+  ta_sb_neigh  = l1a_l1s_com.nsync.list[neigh_id].time_alignmt;
+  ta_sb_neigh  += (d_eotd_first - (23))*4 +
+                  (l1a_l1s_com.dl_tn * 625);
+
+  // for Serving cell, timetag reference is 0
+  if (*first_scell == TRUE)
+  {
+    l1a_l1s_com.nsync.fn_sb_serv = fn_sb_neigh;
+    l1a_l1s_com.nsync.ta_sb_serv = ta_sb_neigh;
+
+    timetag = 0;
+  }
+  else
+  {
+    UWORD32  delta_fn;
+    WORD32   delta_qbit;
+
+    delta_fn = (fn_sb_neigh - l1a_l1s_com.nsync.fn_sb_serv + MAX_FN)%MAX_FN;
+    delta_qbit = ta_sb_neigh - l1a_l1s_com.nsync.ta_sb_serv;
+
+    // Set timetag 
+    timetag = (delta_fn*5000) + (WORD32)(delta_qbit) + toa_correction;
+
+    #if (CODE_VERSION == SIMULATION)
+      #if  (TRACE_TYPE==5) 
+        ((T_MPHC_NCELL_SYNC_IND *)(msg->SigP))->delta_fn   = delta_fn;    
+        ((T_MPHC_NCELL_SYNC_IND *)(msg->SigP))->delta_qbit = delta_qbit;    
+      #endif
+    #endif
+  }
+  // Set timetag
+  ((T_MPHC_NCELL_SYNC_IND *)(msg->SigP))->timetag = timetag;    
+
+}
+#endif
+
+/*-------------------------------------------------------*/
+/* l1a_get_free_dedic_set()                              */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+T_DEDIC_SET *l1a_get_free_dedic_set()
+{
+  T_DEDIC_SET *fset;
+  UWORD8      i;
+  
+  // Get free set pointer.
+  if(l1a_l1s_com.dedic_set.aset == &(l1a_l1s_com.dedic_set.set[0]))
+    fset = &(l1a_l1s_com.dedic_set.set[1]);
+  else
+    fset = &(l1a_l1s_com.dedic_set.set[0]);
+     
+  // Clear free set.
+  fset->achan_ptr                        = NULL;
+  fset->chan1.desc.channel_type          = INVALID_CHANNEL;
+  fset->chan1.desc_bef_sti.channel_type  = INVALID_CHANNEL;
+  fset->chan2.desc.channel_type          = INVALID_CHANNEL;
+  fset->chan2.desc_bef_sti.channel_type  = INVALID_CHANNEL;
+
+  fset->ma.alist_ptr                     = NULL;
+  fset->ma.freq_list.rf_chan_cnt         = 0;
+  fset->ma.freq_list_bef_sti.rf_chan_cnt = 0;
+  
+  // Starting time.
+  fset->serv_sti_fn = -1;
+  fset->neig_sti_fn = -1;
+  
+  // Frequency redefinition flag.
+  fset->freq_redef_flag                 = FALSE;
+
+  // Timing Advance
+  fset->timing_advance                  = 0;
+  fset->new_timing_advance              = 0;
+
+  // TXPWR
+  fset->new_target_txpwr                = NO_TXPWR;
+
+  // Cell Information
+  l1a_reset_cell_info(&(fset->cell_desc));
+
+  // Cipering.
+  fset->a5mode                          = 0; // Ciphering OFF.
+
+  // Clear O&M test variables.
+  fset->dai_mode                        = 0; // No DAI test.
+  fset->chan1.tch_loop                  = 0; // No TCH loop on chan1.
+  fset->chan2.tch_loop                  = 0; // No TCH loop on chan2.
+  
+  // For handover...
+  fset->ho_acc                          = 0;
+  fset->ho_acc_to_send                  = 0;
+  fset->t3124                           = 0;
+
+#if ((REL99 == 1) && (FF_BHO == 1))
+  // For blind handover...
+  fset->report_time_diff                = FALSE;
+  fset->nci                             = FALSE;
+  fset->report_time_diff                = FALSE;
+  fset->real_time_difference            = 0;
+  fset->HO_SignalCode                   = 0;
+#endif
+
+  // Reset DPAGC fifo
+  for(i=0;i<DPAGC_FIFO_LEN;i++)
+  {
+    fset->G_all[i]    = 200;
+    fset->G_DTX[i]    = 200;
+  }
+
+  // Reset DTX_ALLOWED field.
+  fset->dtx_allowed = FALSE;
+
+  #if IDS
+  // clear ids_mode: default value = speech mode
+    fset->ids_mode = 0;
+  #endif
+
+#if (AMR == 1)
+  // Clear the AMR ver 1.0 network settings
+  fset->amr_configuration.noise_suppression_bit         = FALSE;
+  fset->amr_configuration.initial_codec_mode_indicator  = FALSE;
+  fset->amr_configuration.initial_codec_mode            = 0;
+  fset->amr_configuration.active_codec_set              = 0;
+  fset->amr_configuration.threshold[0]                  = 0;
+  fset->amr_configuration.threshold[1]                  = 0;
+  fset->amr_configuration.threshold[2]                  = 0;
+  fset->amr_configuration.hysteresis[0]                 = 0;
+  fset->amr_configuration.hysteresis[1]                 = 0;
+  fset->amr_configuration.hysteresis[2]                 = 0;
+  fset->cmip                                            = C_AMR_CMIP_DEFAULT;
+#endif
+  return(fset);
+}
+
+/*-------------------------------------------------------*/
+/* l1a_fill_bef_sti_param()                              */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+void l1a_fill_bef_sti_param(T_DEDIC_SET *set_ptr, BOOL start_time_present)
+{
+  if(start_time_present == TRUE)
+  // There is a STARTING TIME field...
+  {
+    if((set_ptr->ma.freq_list_bef_sti.rf_chan_cnt != 0) || 
+       (set_ptr->chan1.desc_bef_sti.channel_type != INVALID_CHANNEL) ||
+       (set_ptr->chan2.desc_bef_sti.channel_type != INVALID_CHANNEL))
+    // There is at least one "bef_sti" parameter given for this channel.  
+    // Other empty parameters must be filled with the according "AFTER STARTING TIME" parameters.
+    {
+      // Fill "chan1.desc_bef_sti"
+      if(set_ptr->chan1.desc_bef_sti.channel_type == INVALID_CHANNEL)
+        set_ptr->chan1.desc_bef_sti = set_ptr->chan1.desc;
+        
+      // Fill "chan2.desc_bef_sti"
+      if(set_ptr->chan2.desc_bef_sti.channel_type == INVALID_CHANNEL)
+        set_ptr->chan2.desc_bef_sti = set_ptr->chan2.desc;
+
+      // Fill "freq_list_bef_sti"
+      if(set_ptr->ma.freq_list_bef_sti.rf_chan_cnt == 0)
+        set_ptr->ma.freq_list_bef_sti = set_ptr->ma.freq_list;
+    }
+  }
+}
+
+/*-------------------------------------------------------*/
+/* l1a_decode_starting_time()                            */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+WORD32 l1a_decode_starting_time(T_STARTING_TIME coded_starting_time)
+{
+  WORD32 starting_time; 
+  
+  if(coded_starting_time.start_time_present == TRUE )
+  // A starting time is present.
+  // ---------------------------
+  {
+    WORD32  tp1 = coded_starting_time.start_time.n32;
+    WORD32  t2  = coded_starting_time.start_time.n26;
+    WORD32  t3  = coded_starting_time.start_time.n51;
+
+    // Compute STI. 
+    starting_time = 51*((26 + t3 - t2) % 26) + t3 + (51*26*tp1) ;
+  }
+  else
+  {
+    starting_time = -1;
+  }
+  
+  return(starting_time);
+}
+
+/*-------------------------------------------------------*/
+/* l1a_reset_cell_info()                                 */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+void l1a_reset_cell_info(T_CELL_INFO *cell_info)
+{
+  cell_info->bsic           = 0;         
+  cell_info->fn_offset      = 0;    
+  cell_info->time_alignmt   = 0; 
+  cell_info->meas.acc       = 0;
+  cell_info->meas.nbr_meas  = 0; 
+  cell_info->attempt_count  = 0;
+  cell_info->si_bit_map     = 0;
+
+  cell_info->traffic_meas.input_level        = l1_config.params.il_min;
+  cell_info->traffic_meas_beacon.input_level = l1_config.params.il_min;
+  cell_info->traffic_meas.lna_off            = FALSE;
+  cell_info->traffic_meas_beacon.lna_off     = FALSE;
+
+  cell_info->buff_beacon[0] = cell_info->buff_beacon[1] = cell_info->buff_beacon[2] =
+    cell_info->buff_beacon[3] = l1_config.params.il_min;
+  
+  #if L1_GPRS
+    cell_info->transfer_meas.input_level        = l1_config.params.il_min;
+    cell_info->transfer_meas.lna_off            = FALSE;
+    cell_info->pb                               = 0;
+  #endif
+}
+
+/*-------------------------------------------------------*/
+/* l1a_send_confirmation()                               */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+void l1a_send_confirmation(UWORD32 SignalCode,  UWORD8 queue_type)
+{
+  xSignalHeaderRec *msg;
+
+  msg = os_alloc_sig(0);
+  DEBUGMSG(status,NU_ALLOC_ERR)
+  msg->SignalCode = (int)SignalCode;
+
+  #if (TRACE_TYPE==1) || (TRACE_TYPE==4)
+    l1_trace_message(msg);
+  #endif
+
+
+  #if (OP_L1_STANDALONE == 1)
+  os_send_sig(msg, queue_type);  
+  #else
+ os_send_sig(msg, ((T_ENUM_OS_QUEUE)queue_type));   //omaps00090550
+  #endif
+
+ 
+  DEBUGMSG(status,NU_SEND_QUEUE_ERR)
+}
+
+/*-------------------------------------------------------*/
+/* l1a_send_result()                                     */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+void l1a_send_result(UWORD32 SignalCode, xSignalHeaderRec *msg, UWORD8 queue)
+{
+  // Set flag to avoid the FREE(msg) in L1ASYNC.
+  l1a.l1_msg_forwarded = TRUE;
+  
+  msg->SignalCode = (int)SignalCode;
+
+  // May not be necessary -> to check
+
+  #if (GSM_IDLE_RAM > 1)
+    if (!READ_TRAFFIC_CONT_STATE)
+      {
+        CSMI_TrafficControllerOn();
+      }
+  #endif
+
+  #if (TRACE_TYPE==1) || (TRACE_TYPE==4)
+    l1_trace_message(msg);
+  #endif
+   
+  #if (OP_L1_STANDALONE == 1)
+  os_send_sig(msg, queue);  
+  #else
+os_send_sig(msg, ((T_ENUM_OS_QUEUE)queue));    //omaps00090550
+   #endif
+
+
+  DEBUGMSG(status,NU_SEND_QUEUE_ERR)
+}
+
+/*-------------------------------------------------------*/
+/* l1a_encode_rxqual()                                   */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+UWORD8 l1a_encode_rxqual (UWORD32 inlevel)
+{
+  enum qual_thr
+  {
+    thr_0_2  =   4,
+    thr_0_4  =   8,
+    thr_0_8  =  16,
+    thr_1_6  =  32,
+    thr_3_2  =  64,
+    thr_6_4  = 128,
+    thr_12_8 = 256
+  };
+
+  UWORD8 rxqual;
+  
+  if (inlevel < thr_0_2)  rxqual = 0;
+  else
+    if (inlevel < thr_0_4)  rxqual = 1;
+    else
+      if (inlevel < thr_0_8)  rxqual = 2;
+      else
+        if (inlevel < thr_1_6)  rxqual = 3;
+        else
+          if (inlevel < thr_3_2)  rxqual = 4;
+          else
+            if (inlevel < thr_6_4)  rxqual = 5;
+            else
+              if (inlevel < thr_12_8)  rxqual = 6;
+              else rxqual = 7;
+
+  return((UWORD8) rxqual);
+}
+
+/*-------------------------------------------------------*/
+/* l1a_report_failling_ncell_sync()                      */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+void l1a_report_failling_ncell_sync(UWORD32 SignalCode, UWORD8 neigh_id)
+{
+  xSignalHeaderRec *msg;
+
+  // Send MPHC_NCELL_SYNC_IND message to L3 with a FAILLURE indication.
+  msg = os_alloc_sig(sizeof(T_MPHC_NCELL_SYNC_IND));
+  DEBUGMSG(status,NU_ALLOC_ERR)
+  
+  msg->SignalCode = SignalCode;
+  ((T_MPHC_NCELL_SYNC_IND*)(msg->SigP))->sb_flag      = FALSE;
+  ((T_MPHC_NCELL_SYNC_IND*)(msg->SigP))->radio_freq   = l1a_l1s_com.nsync.list[neigh_id].radio_freq;
+  ((T_MPHC_NCELL_SYNC_IND*)(msg->SigP))->bsic         = 0;
+  ((T_MPHC_NCELL_SYNC_IND*)(msg->SigP))->fn_offset    = 0;
+  ((T_MPHC_NCELL_SYNC_IND*)(msg->SigP))->time_alignmt = 0;
+  
+  // For trace/debug only
+  ((T_MPHC_NCELL_SYNC_IND*)(msg->SigP))->neigh_id     = neigh_id;
+
+  #if (TRACE_TYPE==1) || (TRACE_TYPE==4)
+    l1_trace_message(msg);
+  #endif
+
+  os_send_sig(msg, RRM1_QUEUE);  
+  DEBUGMSG(status,NU_SEND_QUEUE_ERR)
+}
+
+
+/*-------------------------------------------------------*/
+/* l1a_clip_txpwr()                                      */
+/*-------------------------------------------------------*/
+/* Parameters :                                          */
+/* Return     :                                          */
+/* Functionality :                                       */
+/*-------------------------------------------------------*/
+#if (L1_FF_MULTIBAND == 0)
+
+UWORD8 l1a_clip_txpwr (UWORD8 supplied_txpwr, UWORD16 radio_freq)
+{
+  #define txpwr_to_compare(pwr) ((pwr<=l1_config.std.txpwr_turning_point)? pwr+32:pwr)
+
+  switch(l1_config.std.id)
+  {
+    case GSM:
+    case GSM_E:
+    {
+      // Clip LOW according to powerclass_band1.
+      if ( supplied_txpwr < MIN_TXPWR_GSM[l1a_l1s_com.powerclass_band1])
+        return(MIN_TXPWR_GSM[l1a_l1s_com.powerclass_band1]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( supplied_txpwr > l1_config.std.max_txpwr_band1)
+        return(l1_config.std.max_txpwr_band1);
+    }
+    break;
+    
+    case PCS1900:
+    {
+      // Clip LOW according to powerclass_band1.
+      if ( txpwr_to_compare(supplied_txpwr) < 
+           txpwr_to_compare(MIN_TXPWR_PCS[l1a_l1s_com.powerclass_band1]) )
+        return(MIN_TXPWR_PCS[l1a_l1s_com.powerclass_band1]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( txpwr_to_compare(supplied_txpwr) > 
+           txpwr_to_compare(l1_config.std.max_txpwr_band1) )
+        return(l1_config.std.max_txpwr_band1);
+    }
+    break;
+    
+    case DCS1800:
+    {
+      // Clip LOW according to powerclass_band1.
+      if ( txpwr_to_compare(supplied_txpwr) < 
+           txpwr_to_compare(MIN_TXPWR_DCS[l1a_l1s_com.powerclass_band1]) )
+        return(MIN_TXPWR_DCS[l1a_l1s_com.powerclass_band1]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( txpwr_to_compare(supplied_txpwr) > 
+           txpwr_to_compare(l1_config.std.max_txpwr_band1) )
+        return(l1_config.std.max_txpwr_band1);
+    }
+    break;
+    
+    case GSM850:
+    {
+      // Clip LOW according to powerclass_band1.
+      if ( txpwr_to_compare(supplied_txpwr) < 
+           txpwr_to_compare(MIN_TXPWR_GSM850[l1a_l1s_com.powerclass_band1]) )
+        return(MIN_TXPWR_GSM850[l1a_l1s_com.powerclass_band1]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( txpwr_to_compare(supplied_txpwr) > 
+           txpwr_to_compare(l1_config.std.max_txpwr_band1) )
+        return(l1_config.std.max_txpwr_band1);
+    }
+    break;
+
+    case DUAL:
+    case DUALEXT:
+    {
+      // Test which Band is used: GSM or DCS 1800
+      if (radio_freq >= l1_config.std.first_radio_freq_band2)
+      {
+        // Clip LOW according to powerclass_band1.
+        if ( txpwr_to_compare(supplied_txpwr) < 
+             txpwr_to_compare(MIN_TXPWR_DCS[l1a_l1s_com.powerclass_band2]) )
+          return(MIN_TXPWR_DCS[l1a_l1s_com.powerclass_band2]);
+
+        // Clip HIGH according to GSM spec. 05.05.
+        if ( txpwr_to_compare(supplied_txpwr) > 
+             txpwr_to_compare(l1_config.std.max_txpwr_band2) )
+          return(l1_config.std.max_txpwr_band2);
+      }
+      else
+      {
+        // Clip LOW according to powerclass_band1.
+        if ( supplied_txpwr < MIN_TXPWR_GSM[l1a_l1s_com.powerclass_band1])
+          return(MIN_TXPWR_GSM[l1a_l1s_com.powerclass_band1]);
+
+        // Clip HIGH according to GSM spec. 05.05.
+        if ( supplied_txpwr > l1_config.std.max_txpwr_band1)
+          return(l1_config.std.max_txpwr_band1);
+      }
+    }
+    break;
+    
+
+  case DUAL_US:
+    {
+      // Test which Band is used: GSM 850 or PCS1900 
+      if (radio_freq >= l1_config.std.first_radio_freq_band2)
+      {
+        // Clip LOW according to powerclass_band1.
+        if ( txpwr_to_compare(supplied_txpwr) < 
+             txpwr_to_compare(MIN_TXPWR_PCS[l1a_l1s_com.powerclass_band2]) )
+          return(MIN_TXPWR_PCS[l1a_l1s_com.powerclass_band2]);
+
+        // Clip HIGH according to GSM spec. 05.05.
+        if ( txpwr_to_compare(supplied_txpwr) > 
+             txpwr_to_compare(l1_config.std.max_txpwr_band2) )
+          return(l1_config.std.max_txpwr_band2);
+      }
+      else
+      {
+        // Clip LOW according to powerclass_band1.
+        if ( supplied_txpwr < MIN_TXPWR_GSM850[l1a_l1s_com.powerclass_band1])
+          return(MIN_TXPWR_GSM850[l1a_l1s_com.powerclass_band1]);
+
+        // Clip HIGH according to GSM spec. 05.05.
+        if ( supplied_txpwr > l1_config.std.max_txpwr_band1)
+          return(l1_config.std.max_txpwr_band1);
+      }
+    }
+    break;
+  
+  
+    default: // should never occur
+    {
+      return(supplied_txpwr);   
+    }
+ // omaps00090550     break;
+  }
+  return(supplied_txpwr);  
+}
+
+#else /*L1_FF_MULTIBAND = 1 below */
+
+UWORD8 l1a_clip_txpwr (UWORD8 supplied_txpwr, UWORD16 radio_freq)
+{
+
+
+  UWORD8 physical_band_id = 0;
+  physical_band_id = l1_multiband_radio_freq_convert_into_physical_band_id(radio_freq);
+  #define txpwr_to_compare(pwr) ((pwr<= multiband_rf[physical_band_id].tx_turning_point)? pwr+32:pwr)
+  switch(multiband_rf[physical_band_id].gsm_band_identifier)
+  {
+    case RF_GSM900:
+    {
+
+      // Clip LOW according to powerclass_band1.
+      if ( supplied_txpwr < MIN_TXPWR_GSM[l1a_l1s_com.powerclass[physical_band_id]])
+        return(MIN_TXPWR_GSM[l1a_l1s_com.powerclass[physical_band_id]]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( supplied_txpwr > multiband_rf[physical_band_id].max_txpwr)
+        return(multiband_rf[physical_band_id].max_txpwr);
+      break; 
+    }/*case GSM900*/
+    
+    case RF_PCS1900:
+    {
+      // Clip LOW according to powerclass_band1.
+      if ( txpwr_to_compare(supplied_txpwr) <
+           txpwr_to_compare(MIN_TXPWR_PCS[l1a_l1s_com.powerclass[physical_band_id]]) )
+        return(MIN_TXPWR_PCS[l1a_l1s_com.powerclass[physical_band_id]]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( txpwr_to_compare(supplied_txpwr) >
+           txpwr_to_compare(multiband_rf[physical_band_id].max_txpwr) )
+        return(multiband_rf[physical_band_id].max_txpwr);
+      break;
+    }/*case PCS1900*/
+    
+    case RF_DCS1800:
+    {
+      // Clip LOW according to powerclass_band1.
+      if ( txpwr_to_compare(supplied_txpwr) <
+           txpwr_to_compare(MIN_TXPWR_DCS[l1a_l1s_com.powerclass[physical_band_id]]) )
+        return(MIN_TXPWR_DCS[l1a_l1s_com.powerclass[physical_band_id]]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( txpwr_to_compare(supplied_txpwr) >
+           txpwr_to_compare(multiband_rf[physical_band_id].max_txpwr) )
+        return(multiband_rf[physical_band_id].max_txpwr);
+      break;
+    }/*case DCS1800*/
+
+    case RF_GSM850:
+    {
+      // Clip LOW according to powerclass_band1.
+      if ( txpwr_to_compare(supplied_txpwr) <
+           txpwr_to_compare(MIN_TXPWR_GSM850[l1a_l1s_com.powerclass[physical_band_id]]) )
+        return(MIN_TXPWR_GSM850[l1a_l1s_com.powerclass[physical_band_id]]);
+
+      // Clip HIGH according to GSM spec. 05.05.
+      if ( txpwr_to_compare(supplied_txpwr) >
+           txpwr_to_compare(multiband_rf[physical_band_id].max_txpwr) )
+        return(multiband_rf[physical_band_id].max_txpwr);
+      break;
+    }/*case GSM850*/
+
+    default: // should never occur
+    {
+      l1_multiband_error_handler();  
+      return(supplied_txpwr);
+       break;
+    } /*default*/
+   
+  }/*switch(multiband_rfphysical_band_id].gsm_band_identifier)*/
+  return(supplied_txpwr);
+
+}
+
+#endif /*L1_FF_MULTIBAND */
+
+
+//MADC 
+
+#if (L1_MADC_ON == 1)
+#if (OP_L1_STANDALONE == 1)
+#if (ANLG_FAM == 11)
+void   l1a_madc_callback(void)
+{
+	char str[40];
+
+
+
+   xSignalHeaderRec *adc_msg;
+   UWORD16 *adc_result;
+   UWORD16 *madc_results;
+   volatile UWORD16 *drp_temp_results;
+   
+#if (RF_FAM == 61)
+      drp_temp_results =(volatile UWORD16 *) (&drp_srm_api->inout.temperature.output); //omaps00090550
+#endif
+
+#if 0
+    sprintf(str, "Temp Measure %x  ", drp_temp_results);
+
+    //L1_trace_string ("Temp Meas\n");
+    L1_trace_string(str);
+#endif
+
+#if 0
+   int i;
+
+   adc_msg = os_alloc_sig(sizeof(BspTwl3029_MadcResults) + sizeof(UWORD16));
+   adc_result = &((BspTwl3029_MadcResults*)(adc_msg->SigP))->adc1;
+   madc_results =& l1_madc_results.adc1;
+
+   //TEMP_MEAS: DRP
+#if (RF_FAM == 61)
+      drp_temp_results =& (drp_srm_api->inout.temperature.output);
+#endif
+
+   //copy the measured values into the the message structure.
+   memcpy(adc_result,madc_results,11*sizeof(UWORD16));//11 madc
+   adc_result[11] = *drp_temp_results; // 1 temp meas
+   /*
+   for (i=0;i<11;i++)
+   	adc_result[i] = madc_results[i];
+   */
+   //Send the message
+   adc_msg->SignalCode = CST_ADC_RESULT;
+   os_send_sig(adc_msg, RRM1_QUEUE);
+#endif
+}
+#endif // ANLG_FAM == 11
+#endif //OP_L1_STANDALONE
+#endif // L1_MADC_ON
+
+//==============================================================================================
+
--- a/chipsetsw/layer1/include/l1_const.h	Fri Oct 23 01:26:37 2015 +0000
+++ b/chipsetsw/layer1/include/l1_const.h	Tue Oct 27 23:41:22 2015 +0000
@@ -1277,6 +1277,13 @@
 #define B_BCCH_FREQ_IND          3
 #define B_TASK_ABORT            15  // Abort RF tasks for DSP.
 
+/*
+ * FreeCalypso Frankenstein: the following definition has been
+ * imported from LoCosto version of l1_const.h; it is needed for
+ * the LoCosto-based C code to compile.
+ */
+#define C_BA_PM_MEAS (2)
+
 // ****************************************************************
 // POLESTAR EVABOARD 3 REGISTERS & ADRESSES  DEFINITIONS
 // ****************************************************************