changeset 187:7b2986d6f272

tpudrv.c: initial import of LoCosto source
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 08 Jun 2016 02:57:31 +0000
parents cce72085e08b
children 81064b792cc8
files chipsetsw/layer1/tpu_drivers/source/tpudrv.c
diffstat 1 files changed, 578 insertions(+), 1 deletions(-) [+]
line wrap: on
line diff
--- a/chipsetsw/layer1/tpu_drivers/source/tpudrv.c	Wed Jun 08 02:34:29 2016 +0000
+++ b/chipsetsw/layer1/tpu_drivers/source/tpudrv.c	Wed Jun 08 02:57:31 2016 +0000
@@ -1,1 +1,578 @@
-/* dummy C source file */
+/************* Revision Controle System Header *************
+ *                  GSM Layer 1 software
+ *
+ *        Filename tpudrv.c
+ *  Copyright 2003 (C) Texas Instruments
+ *
+ ************* Revision Controle System Header *************/
+/*
+ * TPUDRV.C
+ *
+ * TPU driver for Pole Star
+ *
+ *
+ * Copyright (c) Texas Instruments 1996
+ *
+ */
+
+#include "l1_macro.h"
+#include "iq.h"
+#include "l1_confg.h"
+#include "l1_const.h"
+#include "l1_types.h"
+
+#if (AUDIO_TASK == 1)
+  #include "l1audio_const.h"
+  #include "l1audio_cust.h"
+  #include "l1audio_defty.h"
+#endif
+
+#if (L1_GTT == 1)
+  #include "l1gtt_const.h"
+  #include "l1gtt_defty.h"
+#endif
+
+#if (L1_MIDI == 1)
+  #include "l1midi_defty.h"
+#endif
+
+#include "sys_types.h"
+
+#if TESTMODE
+  #include "l1tm_defty.h"
+#endif
+
+#if (L1_MP3 == 1)
+  #include "l1mp3_defty.h"
+#endif
+
+#if (L1_MIDI == 1)
+  #include "l1midi_defty.h"
+#endif
+
+#if (L1_AAC == 1)
+  #include "l1aac_defty.h"
+#endif
+#include "l1_defty.h"
+#include "tpudrv.h"
+#include "sys_types.h"
+#include "clkm.h"
+#include "l1_time.h"
+#include "l1_varex.h"
+#include "l1_trace.h"
+
+#if (L1_MADC_ON == 1)
+#if (RF_FAM == 61)
+#include "drp_api.h"
+#include "l1_rf61.h"
+#include "drp_drive.h"
+#include "tpudrv61.h"
+extern T_DRP_REGS_STR  *drp_regs;
+#endif
+#endif //L1_MADC_ON
+
+/* RFTime environment */
+#if defined (HOST_TEST)
+  #include "hostmacros.h"
+#endif
+
+
+/*
+ * VEGA and OMEGA  receive windows - Defined in Customer-specific file
+ */
+
+extern UWORD32 debug_tpu;
+
+#if ( OP_WCP == 1 ) && ( OP_L1_STANDALONE != 1 )
+  // WCS Patch : ADC during RX or TX
+  extern inline void GC_SetAdcInfo(unsigned char bTxBasedAdc);
+#endif
+
+/*
+ * Global Variables
+ */
+// GSM1.5 : TPU MEMORY is 16-bit instead of 32 in Gemini/Polxx
+//------------------------------------------------------------
+SYS_UWORD16 *TP_Ptr = (SYS_UWORD16 *) TPU_RAM;
+
+
+/*--------------------------------------------------------------*/
+/*  TPU_Reset : Reset the TPU                                   */
+/*--------------------------------------------------------------*/
+/* Parameters : on/off(1/0)                                     */
+/* Return : none                                                */
+/* Functionality : ) Reset the TPU                              */
+/*--------------------------------------------------------------*/
+void TPU_Reset(SYS_UWORD16 on)
+{
+  if (on)
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) |= TPU_CTRL_RESET;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (!((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_RESET));
+  }
+  else
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) &= ~TPU_CTRL_RESET;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_RESET));
+  }
+}
+
+/*--------------------------------------------------------------*/
+/*  TSP_Reset : Reset the TSP                                   */
+/*--------------------------------------------------------------*/
+/* Parameters : on/off(1/0)                                     */
+/* Return : none                                                */
+/* Functionality : ) Reset the TSP                              */
+/*--------------------------------------------------------------*/
+void TSP_Reset(SYS_UWORD16 on)
+{
+  if (on)
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) |= TSP_CTRL_RESET;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (!((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TSP_CTRL_RESET));
+  }
+  else
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) &= ~TSP_CTRL_RESET;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TSP_CTRL_RESET));
+  }
+}
+
+/*--------------------------------------------------------------*/
+/*  TPU_SPIReset : Reset the SPI of the TPU                     */
+/*--------------------------------------------------------------*/
+/* Parameters : on/off(1/0)                                     */
+/* Return : none                                                */
+/* Functionality : ) the SPI of the TPU                         */
+/*--------------------------------------------------------------*/
+
+void TPU_SPIReset(SYS_UWORD16 on)
+{
+  if (on)
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) |= TPU_CTRL_SPI_RST;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (!((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_SPI_RST));
+  }
+  else
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) &= ~TPU_CTRL_SPI_RST;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_SPI_RST));
+  }
+}
+
+/*--------------------------------------------------------------*/
+/*  TPU_ClkEnable :                                             */
+/*--------------------------------------------------------------*/
+/* Parameters : on/off(1/0)                                     */
+/* Return : none                                                */
+/* Functionality :  Enable the TPU clock                        */
+/*--------------------------------------------------------------*/
+
+void TPU_ClkEnable(SYS_UWORD16 on)
+{
+  if (on)
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) |= TPU_CTRL_CLK_EN;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (!((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_CLK_EN));
+  }
+  else
+  {
+    * ((volatile SYS_UWORD16 *) TPU_CTRL) &= ~TPU_CTRL_CLK_EN;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_CLK_EN));
+  }
+}
+
+/*--------------------------------------------------------------*/
+/*   TPU_Frame_ItOn :                                           */
+/*--------------------------------------------------------------*/
+/* Parameters :  bit  of it to enable                           */
+/* Return : none                                                */
+/* Functionality :  Enable frame it                             */
+/*--------------------------------------------------------------*/
+
+/*-----------------------------------------------------------*/
+/* Warning read modify write access to TPU_INT_CTRL register */
+/* may generate problems using Hyperion.                     */
+/*-----------------------------------------------------------*/
+
+void TPU_FrameItOn(SYS_UWORD16 it)
+{
+      * ((volatile SYS_UWORD16 *) TPU_INT_CTRL) &= ~it;
+}
+
+void TPU_FrameItEnable(void)
+{
+  #if W_A_ITFORCE
+    (*(volatile SYS_UWORD16 *)TPU_INT_CTRL) |= TPU_INT_ITD_F;
+  #else
+    // enable IT_DSP generation on next frame
+    // reset by DSP when IT occurs
+    (*(volatile SYS_UWORD16 *) TPU_CTRL) |=  TPU_CTRL_D_ENBL;
+    // WA for read/modify/write access problem with REG_TPU_CTRL present on Ulysse/Samson/Calypso
+    while (!((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_D_ENBL));
+  #endif
+}
+
+/*--------------------------------------------------------------*/
+/*   TPU_check_IT_DSP :                                         */
+/*--------------------------------------------------------------*/
+/* Parameters : none                                            */
+/* Return : none                                                */
+/* Functionality :  check if an IT DSP still pending                               */
+/*--------------------------------------------------------------*/
+BOOL TPU_check_IT_DSP(void)
+{ // return TRUE if an IT DSP still pending.
+  return( (((*(volatile SYS_UWORD16 *) TPU_CTRL) &  TPU_CTRL_D_ENBL) == TPU_CTRL_D_ENBL));
+}
+
+/*--------------------------------------------------------------*/
+/*   TPU_DisableAllIt :                                         */
+/*--------------------------------------------------------------*/
+/* Parameters : none                                            */
+/* Return : none                                                */
+/* Functionality :  Disabl all it                               */
+/*--------------------------------------------------------------*/
+void  TPU_DisableAllIt()
+{
+        * ((volatile SYS_UWORD16 *) TPU_INT_CTRL) |= TPU_INT_ITF_M | TPU_INT_ITP_M | TPU_INT_ITD_M;
+
+}
+
+
+
+
+
+/*
+ * TP_Program
+ *
+ * Write a null-terminated scenario into TPU memory at a given start address
+ * (Do not write terminating 0)
+ *
+ */
+void *TP_Program(const SYS_UWORD16 *src)
+{
+   /* Write TPU instructions until SLEEP */
+   while (*src)
+   {
+      *TP_Ptr++ = *src++;
+   }
+   #if (TOOL_CHOICE == 3)   // 2.54 Migration
+   return((void *)NULL);
+   #endif // TOOL_CHOICE == 3
+    //  return((void *)NULL);//ompas00090550
+
+}
+
+
+
+void TP_Reset(SYS_UWORD16 on)
+{
+   if (on) {
+      * ((volatile SYS_UWORD16 *) TPU_CTRL) |= (TPU_CTRL_RESET | TSP_CTRL_RESET);
+      while (!((*(volatile SYS_UWORD16 *) TPU_CTRL) &  (TPU_CTRL_RESET | TSP_CTRL_RESET)));
+   }
+   else {
+      * ((volatile SYS_UWORD16 *) TPU_CTRL) &= ~(TPU_CTRL_RESET | TSP_CTRL_RESET);
+      while (((*(volatile SYS_UWORD16 *) TPU_CTRL) &  (TPU_CTRL_RESET | TSP_CTRL_RESET)));
+   }
+}
+
+void TP_Enable(SYS_UWORD16 on)
+{
+   if(on)
+   {
+     * ((volatile SYS_UWORD16 *) TPU_CTRL) |= TPU_CTRL_T_ENBL;
+
+     // Some time shall be wait before leaving the function to ensure that bit has been taken
+     // in account by the TPU. A while loop such as in function TP_reset can't be used as the
+     // ARM can be interrupted within this loop and in that case the pulse will be missed (CQ20781).
+     // The bit is updated in the worst case 24 cycles of 13MHz later it as been written by the MCU.
+     // 24 ticks of 13MHz = 1.84us. Lets take 3us to keep some margin.
+     wait_ARM_cycles(convert_nanosec_to_cycles(3000)); // wait 3us
+   }
+   else
+   {
+     * ((volatile SYS_UWORD16 *) TPU_CTRL) &= ~TPU_CTRL_T_ENBL;
+     // Some time shall be wait before leaving the function to ensure that bit has been taken
+     // in account by the TPU. A while loop such as in function TP_reset can't be used as the
+     // ARM can be interrupted within this loop and in that case the pulse will be missed (CQ20781).
+     // The bit is updated in the worst case 24 cycles of 13MHz later it as been written by the MCU.
+     // 24 ticks of 13MHz = 1.84us. Lets take 3us to keep some margin.
+     wait_ARM_cycles(convert_nanosec_to_cycles(3000)); // wait 3us
+   }
+}
+
+
+/*-----------------------------------------------------------------------*/
+/*   Function name: TPU_wait_idle                                        */
+/*-----------------------------------------------------------------------*/
+/*                                                                       */
+/*   Parameters:    None                                                 */
+/*                                                                       */
+/*   Return:        None                                                 */
+/*                                                                       */
+/*-----------------------------------------------------------------------*/
+/*   Description:   Wait until TPU scenario execution is complete        */
+/*                                                                       */
+/*-----------------------------------------------------------------------*/
+void TPU_wait_idle(void)
+{
+  while( ((*(volatile SYS_UWORD16 *) (TPU_CTRL)) & TPU_CTRL_TPU_IDLE) == TPU_CTRL_TPU_IDLE)
+  {
+    wait_ARM_cycles(convert_nanosec_to_cycles(3000));
+  }
+}
+
+
+/*
+ * l1dmacro_idle
+ *
+ * Write SLEEP instruction, start TPU and reset pointer
+ */
+void l1dmacro_idle (void)
+{
+   *TP_Ptr++ = TPU_SLEEP;
+
+   /* start TPU */
+   TP_Ptr = (SYS_UWORD16 *) TPU_RAM;
+   TP_Enable(1);
+}
+
+/*
+ * l1dmacro_offset
+ *
+ * Set OFFSET register
+ *
+ */
+void l1dmacro_offset    (UWORD32 offset_value, WORD32 relative_time)
+{
+   // WARNING: 'relative time' and 'offset_value' must always be comprised
+   // between 0 and TPU_CLOCK_RANGE !!!
+
+   if (relative_time != IMM)      // IMM indicates to set directly without AT
+   {
+     *TP_Ptr++ = TPU_FAT(relative_time);
+   }
+   *TP_Ptr++ = TPU_OFFSET(offset_value);
+}
+
+/*
+ * l1dmacro_synchro
+ *
+ * Set synchro register
+ */
+void l1dmacro_synchro (UWORD32 when, UWORD32 value)
+{
+   // WARNING: 'when' must always be comprised between 0 and TPU_CLOCK_RANGE !!!
+   #if (TRACE_TYPE!=0) && (TRACE_TYPE!=5)
+     trace_fct(CST_L1DMACRO_SYNCHRO, 1);//omaps00090550
+   #endif
+
+   if (value != IMM)      // IMM indicates to set directly without AT
+   {
+     *TP_Ptr++ = TPU_FAT(when);
+   }
+
+   *TP_Ptr++ = TPU_SYNC(value);
+   l1s.tpu_offset_hw = value;  // memorize the offset set into the TPU.
+}
+
+
+/*
+ * l1dmacro_adc_read
+ *
+ */
+void l1dmacro_adc_read_rx(void)
+{
+
+  #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
+     // TSP needs to be configured in order to send serially to Omega
+
+//   *TP_Ptr++ = TPU_MOVE  (TSP_SPI_SET1, TSP_CLK_RISE); // Clock configuration
+     *TP_Ptr++ = TPU_WAIT  (5);
+     *TP_Ptr++ = TPU_MOVE  (TSP_CTRL1,6);                // Device and Nb of bits configuration
+     *TP_Ptr++ = TPU_MOVE  (TSP_TX_REG_1,STARTADC);      // Load data to send
+     *TP_Ptr++ = TPU_MOVE  (TSP_CTRL2, TC2_WR);          // Start serialization command and adc conversion
+     *TP_Ptr++ = TPU_WAIT  (5);
+     *TP_Ptr++ = TPU_MOVE  (TSP_TX_REG_1,0x00);
+     *TP_Ptr++ = TPU_MOVE  (TSP_CTRL2, TC2_WR);          // Reset startadc pulse
+
+     #if (TRACE_TYPE==1)||(TRACE_TYPE ==4)
+       #if (GSM_IDLE_RAM == 0)
+         l1_trace_ADC(0);
+       #else
+         l1_trace_ADC_intram(0);
+       #endif
+     #endif
+  #endif
+
+#if (L1_MADC_ON == 1)
+  #if (ANLG_FAM == 11)
+
+     #if (TRACE_TYPE==1)||(TRACE_TYPE ==4)
+       #if (GSM_IDLE_RAM == 0)
+         l1_trace_ADC(0);
+       #else
+         l1_trace_ADC_intram(0);
+       #endif
+     #endif
+  #endif
+
+  #if (OP_WCP == 1) && (OP_L1_STANDALONE != 1)
+    // WCS patch: ADC during RX
+    GC_SetAdcInfo(0);
+  #endif
+#endif
+}
+
+
+#if (CODE_VERSION != SIMULATION)
+#if (L1_MADC_ON ==1)
+/*
+ * l1dmacro_adc_read_rx_cs_mode0
+ *
+ * Purpose:
+ * ======
+ * MADC is not enabled during CS_MODE0 periodically. MADC is enabled in CS_MODE0
+ * when Layer 1 receives MPHC_RXLEV_REQ from L23. However in CS_MODE0, MPHC_RXLEV_REQ
+ * is not received periodically. In case network is not found, the period between 2 MPHC_RXLEV_REQ
+ * increases and can be as high as 360 seconds (Maximum Value)
+ * This can result in battery related issues like phone powering off without MMI indication.
+ */
+
+
+void l1dmacro_adc_read_rx_cs_mode0(void)
+{
+          *TP_Ptr++ = TPU_MOVE(REG_SPI_ACT_U,START_ADC);
+          *TP_Ptr++ = TPU_WAIT  (2);
+          *TP_Ptr++ = TPU_MOVE(REG_SPI_ACT_U,0);
+
+#if (L1_MADC_ON == 1)
+  #if (ANLG_FAM == 11)
+
+     #if (TRACE_TYPE==1)||(TRACE_TYPE ==4)
+       #if (GSM_IDLE_RAM == 0)
+         l1_trace_ADC(0);
+       #else
+         l1_trace_ADC_intram(0);
+       #endif
+     #endif
+  #endif
+
+  #if (OP_WCP == 1) && (OP_L1_STANDALONE != 1)
+    // WCS patch: ADC during RX
+    GC_SetAdcInfo(0);
+  #endif
+#endif
+}
+
+
+#endif //If MADC is enabled
+#endif //If Not Simulation
+
+/*
+ * l1dmacro_adc_read_tx
+ *
+ */
+
+
+#if (ANLG_FAM != 11)
+void l1dmacro_adc_read_tx(UWORD32 when)
+#else
+void l1dmacro_adc_read_tx(UWORD32 when, UWORD8 tx_up_state)
+#endif
+{
+
+  #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
+
+     *TP_Ptr++ = TPU_FAT (when);
+     *TP_Ptr++ = TPU_MOVE  (TSP_CTRL1,6);                // Device and Nb of bits configuration
+     *TP_Ptr++ = TPU_MOVE  (TSP_TX_REG_1, STARTADC|BULON|BULENA);      // Load data to send
+     *TP_Ptr++ = TPU_MOVE  (TSP_CTRL2, TC2_WR);          // Start serialization command and adc conversion
+     *TP_Ptr++ = TPU_WAIT  (5);
+     *TP_Ptr++ = TPU_MOVE  (TSP_TX_REG_1,          BULON|BULENA);
+     *TP_Ptr++ = TPU_MOVE  (TSP_CTRL2, TC2_WR);          // Reset startadc pulse
+
+     #if (TRACE_TYPE==1)||(TRACE_TYPE ==4)
+       l1_trace_ADC(1);
+     #endif
+  #endif
+
+#if (L1_MADC_ON == 1)
+  #if (ANLG_FAM == 11)
+     *TP_Ptr++ = TPU_FAT (when);
+     *TP_Ptr++ = TPU_MOVE(REG_SPI_ACT_U,tx_up_state | START_ADC);
+     *TP_Ptr++ = TPU_WAIT  (2);
+     *TP_Ptr++ = TPU_MOVE(REG_SPI_ACT_U,tx_up_state);
+
+#if 1 // TEMP MEASUREMENT - uncomment and test after MADC
+#if (RF_FAM == 61)
+     *TP_Ptr++ = TPU_MOVE(OCP_DATA_MSB, ((START_SCRIPT(DRP_TEMP_CONV))>>8) & 0xFF);      \
+	 *TP_Ptr++ = TPU_MOVE(OCP_DATA_LSB, (START_SCRIPT(DRP_TEMP_CONV))     & 0xFF);      \
+	 *TP_Ptr++ = TPU_MOVE(OCP_ADDRESS_MSB, (((UWORD16)( ((UWORD32)(&drp_regs->SCRIPT_STARTL))&0xFFFF)>>8) & 0xFF));      \
+	 *TP_Ptr++ = TPU_MOVE(OCP_ADDRESS_LSB, ((UWORD16)( ((UWORD32)(&drp_regs->SCRIPT_STARTL))&0xFFFF))     & 0xFF);     \
+	 *TP_Ptr++ = TPU_MOVE(OCP_ADDRESS_START,     0x01);                \
+       //TEMP_MEAS: Call TEMP Conv Script in DRP
+     //MOVE_REG_TSP_TO_RF(START_SCRIPT(DRP_TEMP_CONV),(UWORD16)(&drp_regs->SCRIPT_STARTL));
+#endif
+
+#endif
+
+     #if (TRACE_TYPE==1)||(TRACE_TYPE ==4)
+       l1_trace_ADC(1);
+     #endif
+
+  #endif
+#endif //L1_MADC_ON
+
+     #if (OP_WCP == 1) && (OP_L1_STANDALONE != 1)
+      // WCS patch: ADC during TX
+      GC_SetAdcInfo(1);
+     #endif
+
+
+}
+
+
+/*
+#if (RF_FAM == 61)
+
+void l1dmacro_adc_read_tx(UWORD32 when, UWORD8 tx_up_state)
+{
+    int i;
+
+	 *TP_Ptr++ = TPU_FAT (when);
+	 *TP_Ptr++ = TPU_MOVE(REG_SPI_ACT_U,tx_up_state | START_ADC);
+	 *TP_Ptr++ = TPU_WAIT  (2);
+         *TP_Ptr++ = TPU_MOVE(REG_SPI_ACT_U,tx_up_state);
+
+     #if (TRACE_TYPE==1)||(TRACE_TYPE ==4)
+       l1_trace_ADC(1);
+     #endif
+
+
+  #if (OP_WCP == 1) && (OP_L1_STANDALONE != 1)
+   // WCS patch: ADC during TX
+   GC_SetAdcInfo(1);
+  #endif
+}
+
+#endif
+*/
+
+/*
+ * l1dmacro_set_frame_it
+ *
+ */
+void l1dmacro_set_frame_it(void)
+{
+  TPU_FrameItEnable();
+}