FreeCalypso > hg > tcs211-l1-reconst

changeset 138:aee61e6a8b8f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
l1_sync.c: import of sensible changes from freecalypso-sw/gsm-fw version
author Mychaela Falconia <falcon@ivan.Harhan.ORG>
date Sat, 14 May 2016 23:22:11 +0000
parents 8ed3fec03452
children 44cd24bfe9d0
files chipsetsw/layer1/cfile/l1_sync.c
diffstat 1 files changed, 72 insertions(+), 38 deletions(-) [+]
line wrap: on
line diff
--- a/chipsetsw/layer1/cfile/l1_sync.c	Sat May 14 23:17:13 2016 +0000
+++ b/chipsetsw/layer1/cfile/l1_sync.c	Sat May 14 23:22:11 2016 +0000
@@ -174,7 +174,9 @@
 #endif
 #endif
 
-#include "sys_conf.h"
+#if (CHIPSET >= 12)
+  #include "sys_conf.h"
+#endif
 
 #if (OP_L1_STANDALONE != 1) && (WCP_PROF == 1)
   #include "prf/prf_api.h"
@@ -185,7 +187,10 @@
 #define TOTAL_NO_OF_BITS_IDLE_MEAS    625
 extern UWORD32 qual_acc_idle1[2];
 
-#include "tpudrv61.h"
+#if (RF_FAM == 61)
+  #include "tpudrv61.h"
+#endif
+
 #if W_A_DSP1
   UWORD8 old_sacch_DSP_bug = FALSE;
 #endif
@@ -368,11 +373,20 @@
       (*( volatile unsigned short* )(0xFFFE4802)) |= (1 << 2);    // GPIO-2=1
     #endif
 
+/*
+ * FreeCalypso change: the conditioned-out GPIO twiddling below appears in
+ * the LoCosto version of this L1 code without any conditionals around it.
+ * Checking the disassembly of the Leonardo binary object confirms that
+ * NO GPIO muck takes places in that version.  Needless to say, I am
+ * disabling it for FreeCalypso - we don't want to wreak havoc on some
+ * target that uses GPIO 0 for something else.
+ */
+#if 0
    // Configure GPIO0 pin as output - Reset Bit 0 i.e. set Bit 0 to 0
    (*( volatile unsigned short* )(0xFFFE4804)) &= (~(1 << 0));    // GPIO-2=1
    // write 1 in GPIO pin 0
    (*( volatile unsigned short* )(0xFFFE4802)) |= (1 << 0);    // GPIO-2=1
-
+#endif
 
     // stop the gauging.This function must be called at the
     // begining of the HISR in order to have the IT_GAUGING
@@ -509,7 +523,7 @@
       l1_cpu_load_stop();
     #endif
 
-    #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4)
+    #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4)) && (DSP >= 38)
       // DSP CPU load for TRACE_TYPE == 1 and 4 only
       if(trace_info.current_config->l1_dyn_trace & 1<<L1_DYN_TRACE_DSP_CPU_LOAD)
       {
@@ -518,9 +532,10 @@
       }
     #endif
 
+#if 0
    // write 0 in GPIO pin 0
    (*( volatile unsigned short* )(0xFFFE4802)) &= (~(1 << 0));    // GPIO-2=1
-
+#endif
 
   }
 
@@ -1010,7 +1025,9 @@
             l1s_audio_manager();
       #endif
     #else
-      l1s.gsm_idle_ram_ctl.l1s_full_exec = FALSE;
+      #if (GSM_IDLE_RAM != 0)
+        l1s.gsm_idle_ram_ctl.l1s_full_exec = FALSE;
+      #endif
     #endif
 
 // Triton Audio ON/OFF Changes
@@ -6061,7 +6078,7 @@
       // Accumulate the new measurement with the partial result.
       // Compensate AGC for current measurement value.
       l1a_l1s_com.Scell_info.meas.acc += l1a_l1s_com.Scell_IL_for_rxlev;
-	  static_s_rxlev_cntr++;
+      static_s_rxlev_cntr++;
 
       // **********
       // Reporting
@@ -6125,7 +6142,7 @@
 
         // Reset pointer for debugg.
         pch_msg = NULL;
-		static_s_rxlev_cntr = 0;
+	static_s_rxlev_cntr = 0;
       }
 
     }// end of READ
@@ -7501,6 +7518,12 @@
       {
         l1a_l1s_com.dedic_set.stop_tch = TRUE;
 
+	/*
+	 * FreeCalypso change: this module was failing to compile without
+	 * AUDIO_TASK enabled because of the following code;
+	 * conditional has been added.
+	 */
+      #if AUDIO_TASK
         // If audio enabling was forced by L1S because of a HO failure, do not force it anymore.
         // Restore it in the state required by the MMI if the feature is compiled.
         if (l1a_l1s_com.audio_forced_by_l1s == TRUE)
@@ -7515,6 +7538,7 @@
         #endif // L1_EXTERNAL_AUDIO_VOICE_ONOFF
           l1a_l1s_com.audio_forced_by_l1s = FALSE;
         }
+      #endif
       }
 
       // The new channel becomes the ACTIVE one.
@@ -7802,6 +7826,8 @@
     {
       l1a_l1s_com.dedic_set.stop_tch = TRUE;
 
+      /* FreeCalypso change: same situation as earlier in this function */
+    #if AUDIO_TASK
       // If audio enabling was forced by L1S because of a HO failure, do not force it anymore.
       // Restore it in the state required by the MMI if the feature is compiled.
       if (l1a_l1s_com.audio_forced_by_l1s == TRUE)
@@ -7816,6 +7842,7 @@
       #endif // L1_EXTERNAL_AUDIO_VOICE_ONOFF
         l1a_l1s_com.audio_forced_by_l1s = FALSE;
       }
+    #endif
 
    #if (AMR == 1)
       // Reset DTX AMR status
@@ -7839,36 +7866,38 @@
     l1a_l1s_com.l1s_en_task[TCHA]  = TASK_DISABLED;
 
 
-		// Reset active dedicated set.
-		l1a_l1s_com.dedic_set.aset = NULL;
-
-	}
-	else
-	{
-	     if (l1a_l1s_com.audio_forced_by_l1s == TRUE)
-	    {
-		  #if (L1_EXTERNAL_AUDIO_VOICE_ONOFF == 1)
-			if (l1a_l1s_com.audio_onoff_task.parameters.onoff_value == FALSE)
-			{
-			  l1s_dsp_com.dsp_ndb_ptr->d_toneskb_init |= (API) B_AUDIO_OFF_STOP;
-			}
-		  #else // L1_EXTERNAL_AUDIO_VOICE_ONOFF
-			l1s_dsp_com.dsp_ndb_ptr->d_toneskb_init |= (API) B_AUDIO_OFF_STOP;
-		  #endif // L1_EXTERNAL_AUDIO_VOICE_ONOFF
-			l1a_l1s_com.audio_forced_by_l1s = FALSE;
-         }
-         #if (AMR == 1)
-	  // Reset DTX AMR status
-	 l1s.dtx_amr_dl_on=FALSE;
-	 #endif
-
-	}
-
-    // Clear d_ra_conf => default value
-    l1s_dsp_com.dsp_ndb_ptr->d_ra_conf = 0;
-
-	// Reset input msg.
-	l1a_l1s_com.dedic_set.SignalCode = NULL;
+    // Reset active dedicated set.
+    l1a_l1s_com.dedic_set.aset = NULL;
+
+  }
+  else
+  {
+    /* FreeCalypso change: same AUDIO_TASK situation as earlier */
+    #if AUDIO_TASK
+      if (l1a_l1s_com.audio_forced_by_l1s == TRUE)
+      {
+        #if (L1_EXTERNAL_AUDIO_VOICE_ONOFF == 1)
+          if (l1a_l1s_com.audio_onoff_task.parameters.onoff_value == FALSE)
+          {
+            l1s_dsp_com.dsp_ndb_ptr->d_toneskb_init |= (API) B_AUDIO_OFF_STOP;
+          }
+        #else // L1_EXTERNAL_AUDIO_VOICE_ONOFF
+          l1s_dsp_com.dsp_ndb_ptr->d_toneskb_init |= (API) B_AUDIO_OFF_STOP;
+        #endif // L1_EXTERNAL_AUDIO_VOICE_ONOFF
+        l1a_l1s_com.audio_forced_by_l1s = FALSE;
+      }
+    #endif
+    #if (AMR == 1)
+      // Reset DTX AMR status
+      l1s.dtx_amr_dl_on=FALSE;
+    #endif
+  }
+
+  // Clear d_ra_conf => default value
+  l1s_dsp_com.dsp_ndb_ptr->d_ra_conf = 0;
+
+  // Reset input msg.
+  l1a_l1s_com.dedic_set.SignalCode = NULL;
  #if ((REL99 == 1) && (FF_BHO == 1))
     // this is required in BHO as you need to retain the previous channel info.
     //This is checked in HO_REQ to L1S.....In normal handover this does not happen
@@ -8162,11 +8191,16 @@
         {
           l1a_l1s_com.dedic_set.stop_tch = TRUE;
 
+	/*
+	 * FreeCalypso change: same AUDIO_TASK conditional issue as earlier.
+	 */
+	#if AUDIO_TASK
           // CQ: Force the Audio ON to avoid having the DSP reseting the VDLON and producing a pop noise
           // on single ended outputs.
           l1s_dsp_com.dsp_ndb_ptr->d_toneskb_init |= (API) B_AUDIO_ON_START;
           l1s.l1_audio_it_com = TRUE;
           l1a_l1s_com.audio_forced_by_l1s = TRUE;
+	#endif
         }
 
         // Clear ciphering setting in MCU-DSP com.