FreeCalypso > hg > tcs211-pirelli

comparison chipsetsw/services/cst/cst_exts.c @ 0:509db1a7b7b8

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
initial import: leo2moko-r1
author Space Falcon <falcon@ivan.Harhan.ORG>
date Mon, 01 Jun 2015 03:24:05 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:509db1a7b7b8
1 /*
2 +--------------------------------------------------------------------+
3 | PROJECT: GSM-F&D (8411) $Workfile:: CST_EXTS.C $|
4 | $Author:: Sa $ CONDAT GmbH $Revision:: 7 $|
5 | CREATED: 03.08.99 $Modtime:: 14.02.00 16:06 $|
6 | STATE : code |
7 +--------------------------------------------------------------------+
8
9
10 MODULE : CST_EXTS
11
12 PURPOSE : This Modul defines the custom specific AT commands
13 */
14
15 #ifndef CST_EXTS_C
16 #define CST_EXTS_C
17 #endif
18
19
20 #include "config/swconfig.cfg"
21 #include "config/chipset.cfg"
22 #include "config/l1sw.cfg"
23
24
25
26 #define ENTITY_CST
27 /*==== INCLUDES ===================================================*/
28
29 #include <stdlib.h>
30 #include <string.h>
31 #include <stdio.h>
32 #include "typedefs.h"
33 #include "m_sms.val"
34 #include "m_fac.h"
35 #include "p_mnsms.h"
36 #include "p_mmreg.h"
37 #include "p_mncc.h"
38 #include "aci_cmh.h"
39 #include "vsi.h"
40 #include "gsm.h"
41 #include "p_cst.h"
42 #include "cst/cst.h"
43 #include "custom.h"
44
45 #ifdef ALR
46 #include "main/sys_ver.h"
47 #endif
48
49 /*==== MELODY TEST ==================================================*/
50
51 #define MELODY_E1 0
52
53 extern void enable_tch_vocoder(BOOL vocoder);
54
55 #if (MELODY_E1)
56 extern void audio_melo_e1_demo1_start(void);
57 extern void audio_melo_e1_demo1_stop(void);
58 extern void audio_melo_e1_demo2_start(void);
59 extern void audio_melo_e1_demo2_stop(void);
60 #endif
61
62 #if (MELODY_E2)
63 extern void audio_melo_e2_load_lsi(void);
64 extern void audio_melo_e2_demo1_start(void);
65 extern void audio_melo_e2_demo1_stop(void);
66 extern void audio_melo_e2_demo2_start(void);
67 extern void audio_melo_e2_demo2_stop(void);
68 #endif
69
70
71
72 /*==== CONSTANTS ==================================================*/
73
74 #define EXT_ATD "EXT: D, I"
75 #define EXT_ATCFUN "EXT: +CFUN, I"
76 #define EXT_ATCOPS_START "EXT: +COPS, I"
77 #define EXT_ATCOPS_STOP "EXT: +COPS, O"
78 #define EXT_ENTER "EXT: I"
79 #define EXT_LEAVE "EXT: O"
80 #define EXT_UNEXPCTD "EXT: E"
81
82 #define EXT_DIAL_VOICE_PASS "DVCP"
83
84 #define EXT_MAX_BUF_LEN 41
85
86 #define EXT_VOICE_DELIMITER ';'
87
88 /*==== EXPORT =====================================================*/
89
90 /*==== TYPES ======================================================*/
91
92 #ifndef WIN32
93 extern USHORT IQ_GetBuild(void);
94 #ifndef ALR
95 extern USHORT IQ_GetPoleStarVersion(void);
96 #endif
97 extern USHORT IQ_GetJtagId(void);
98 extern USHORT IQ_GetRevision(void);
99 extern void l1dmacro_init_hw(void);
100
101 extern BOOL SER_WriteConfig (char *new_config,
102 BOOL write_to_flash);
103 extern BOOL SER_ImmediateSwitch (void);
104 #endif
105
106 LOCAL CHAR* percentCFG ( CHAR* cmd );
107 LOCAL CHAR* percentDBG ( CHAR* cmd );
108 LOCAL void ext_LeaveEXT ( BOOL final );
109 LOCAL void ext_CreatePString ( CHAR* buffer,
110 CHAR* text );
111 GLOBAL void ext_ContinueTest ( CHAR* id );
112
113 /*==== VARIABLES ==================================================*/
114
115 LOCAL CHAR* extCmd; /* remaining unparsed command string, */
116 /* will be needed in case of asynchronous */
117 /* command handling */
118 LOCAL USHORT extCmdLen; /* length of command string, will be */
119 /* needed in case of asynchronous */
120 /* command handling */
121 LOCAL CHAR extBuffer[EXT_MAX_BUF_LEN]; /* outbut buffer */
122
123 LOCAL CHAR extDialNum[MAX_PHB_NUM_LEN];
124 /* number to be dialled during testing */
125 GLOBAL SHORT extCallId = ACI_NumParmNotPresent;
126 /* identifier of the call which was */
127 /* set-up using AT extension mechansim */
128 GLOBAL T_ACI_AT_CMD currExtCmd = AT_CMD_NONE;
129 /* used for indicating asynchronous */
130 /* command handling */
131 LOCAL T_ACI_AT_CMD currAbrtCmd = AT_CMD_NONE;
132 /* used for indicating abort of */
133 /* asynchronous command handling */
134
135 /*==== FUNCTIONS ==================================================*/
136
137 USHORT * csf_return_adc (void);
138
139 /*
140 +--------------------------------------------------------------------+
141 | PROJECT : GSM-PS (8403) MODULE : TIL_CSF |
142 | STATE : code ROUTINE : cmh_show_version |
143 +--------------------------------------------------------------------+
144
145 PURPOSE : Trace Layer 1 DSP version numbers
146
147 */
148
149 #ifndef WIN32
150
151
152 static void jtagid_to_chipset (USHORT jtagid, CHAR *chipset)
153 {
154
155 switch (jtagid) {
156
157 case 0xB268:
158
159 strcpy (chipset, "Hercules");
160 break;
161
162 case 0xB2B5:
163
164 strcpy (chipset, "Ulysse 1Mbits rev. B");
165 break;
166
167 case 0xB335:
168
169 strcpy (chipset, "Ulysse 1Mbits rev. A");
170 break;
171
172 case 0xB334:
173
174 strcpy (chipset, "Ulysse 2Mbits");
175 break;
176
177 case 0xB393:
178
179 strcpy (chipset, "Ulysse G1");
180 break;
181
182
183 case 0xB396:
184
185 strcpy (chipset, "Calypso rev. B");
186 break;
187
188 case 0xB2AC:
189
190 // Samson and Calypso rev. A share the same JTAG ID.
191 #if (CHIPSET != 7)
192 strcpy (chipset, "Samson");
193 #else
194 strcpy (chipset, "Calypso rev. A");
195 #endif
196 break;
197
198 case 0xB217:
199
200 strcpy (chipset, "Ulysse C035");
201 break;
202
203 case 0xB496:
204
205 strcpy (chipset, "Calypso C035");
206 break;
207
208 case 0xB4FB:
209
210 strcpy (chipset, "Calypso Lite C035");
211 break;
212
213 default:
214
215 strcpy (chipset, "Unknown");
216 break;
217 }
218 }
219
220 GLOBAL void cmh_show_version (
221 CHAR *command,
222 USHORT *len,
223 CHAR *output
224 )
225 {
226 #ifndef ALR
227 CHAR buf[80];
228 USHORT build, hw, rev;
229 #else
230 CHAR buf[160];
231 CHAR chipset[25];
232 #endif
233 USHORT jtag;
234 UCHAR size;
235
236 /*
237 * Retrieve hardware JTAG ID info
238 */
239 jtag = IQ_GetJtagId();
240
241 #ifndef ALR
242 /*
243 * Retrieve others hardware info and build from library
244 */
245 build = IQ_GetBuild();
246 hw = IQ_GetPoleStarVersion();
247 rev = IQ_GetRevision();
248
249 sprintf (buf, "Build %d, Silicon Revision %04X/%04X/%04X",
250 build, hw, jtag, rev);
251 #else
252
253 /*
254 * Retrieve CHIPSET name from JTAG ID
255 */
256 jtagid_to_chipset (jtag, chipset);
257
258 sprintf (buf,
259 "Chipset Version:\n\r\t%s\n\rS/W Versions:\n\n\r\tLayer1\t%4X_%3X\n\r\tLayer2-3 %3XBERLIN_S420\n\r\tNICE\t %3X_I64",
260 chipset,
261 OFFICIAL_VERSION,
262 INTERNAL_VERSION,
263 G23VERSION,
264 SYSTEMVERSION);
265 #endif
266
267 // Format output as a list of Pascal-like strings
268 size = strlen(buf);
269 output[0] = size;
270 strcpy(&(output[1]), buf);
271 output[size+1] = (CHAR) 0xFF; // terminate list of strings
272 }
273
274 #endif /* #ifndef WIN32 */
275
276
277
278 /*
279 +--------------------------------------------------------------------+
280 | PROJECT : GSM-PS (8403) MODULE : TIL_CSF |
281 | STATE : code ROUTINE : show_adc_conversion |
282 +--------------------------------------------------------------------+
283
284 PURPOSE : Trace Layer 1 AD conversions results
285
286 */
287
288 GLOBAL void show_adc_conversion (CHAR *output)
289 {
290 USHORT * adc_conversion;
291 #ifdef ALR
292 CHAR buf[160];
293 #else
294 CHAR buf[80];
295 #endif
296 UCHAR size;
297
298 adc_conversion = csf_return_adc ();
299 #ifdef ALR
300 sprintf (buf, "ADC 0 = %x, ADC 1 = %x, ADC 2 = %x, ADC 3 = %x, ADC 4 = %x, ADC 5 = %x, ADC 6 = %x, ADC 7 = %x, ADC 8 = %x",
301 *adc_conversion++, *adc_conversion++, *adc_conversion++,
302 *adc_conversion++, *adc_conversion++, *adc_conversion++,
303 *adc_conversion++, *adc_conversion++, *adc_conversion);
304
305 #else
306 sprintf (buf, "ADC 0 = %x, ADC 1 = %x, ADC 2 = %x, ADC 3 = %x, ADC 4 = %x",
307 *adc_conversion++, *adc_conversion++, *adc_conversion++,
308 *adc_conversion++, *adc_conversion);
309 #endif
310
311 // Format output as a list of Pascal-like strings
312 size = strlen(buf);
313 output[0] = size;
314 strcpy(&(output[1]), buf);
315 output[size+1] = (CHAR) 0xFF; // terminate list of strings
316 }
317
318
319 /*
320 +--------------------------------------------------------------------+
321 | PROJECT : GSM-PS (8403) MODULE : CST_EXTS |
322 | STATE : code ROUTINE : AEC_Enable |
323 +--------------------------------------------------------------------+
324
325 PURPOSE : activate the Acoustic Echo Cancelation
326
327 */
328
329 GLOBAL void AEC_Enable (CHAR *command, CHAR *output)
330 {
331
332 /* -------------------------------------------------------------------------- */
333 /* MMI_AEC_REQ : 0283 = Long AEC, 105 = SPENH, 187 = AEC+SPENH, 1 = STOP */
334 /* aec_control register bits | 0 0 Sa t2|t1 g3 g2 g1|g0 e2 e1 ak| */
335 /* bit 0 : ACK bit : set to 1 in order to warn DSP that a new command */
336 /* is present. */
337 /* bit 1 : enable AEC */
338 /* bit 2 : enable SPENH (= Speech Enhancement = noise reduction) */
339 /* bit 3 : additionnal AEC gain attenuation (lsb) */
340 /* bit 4 : additionnal AEC gain attenuation (msb) */
341 /* bit 5 : additionnal SPENH gain attenuation (lsb) */
342 /* bit 6 : additionnal SPENH gain attenuation (msb) */
343 /* bit 7 : reset trigger for AEC */
344 /* bit 8 : reset trigger for SPENH */
345 /* bit 9 : AEC selector 0 : short AEC, 1 : long AEC */
346 /* */
347 /* for Short AEC 0083 */
348 /* for long AEC 0283 */
349 /* for long AEC -6 dB 028B */
350 /* for long AEC -12 dB 0293 */
351 /* for long AEC -18 dB 029B */
352 /* for SPENH 0105 */
353 /* for SPENH -6 dB 0125 */
354 /* for SPENH -12 dB 0145 */
355 /* for SPENH -18 dB 0165 */
356 /* for BOTH 0187 */
357 /* for STOP ALL 0001 (all bits reset + ACK to 1 to warn the DSP) */
358 /* -------------------------------------------------------------------------- */
359
360
361 command++; /* increment command pointer to point on the hexa value of the command */
362
363
364 if (!strncmp(command, "0083", 4))
365 {
366 output[0] = strlen ("Short AEC is active");
367 memcpy (&output[1], "Short AEC is active", 19);
368
369 /* end of string list */
370 output [20] = (CHAR) 0xff;
371 csf_aec_enable(0x0083);
372 }
373
374 else if (!strncmp(command, "0283", 4))
375 {
376 output[0] = strlen ("Long AEC is active");
377 memcpy (&output[1], "Long AEC is active", 18);
378
379 /* end of string list */
380 output [19] = (CHAR) 0xff;
381 csf_aec_enable(0x0283);
382 }
383
384 else if (!strncmp(command, "028B", 4))
385 {
386 output[0] = strlen ("Long AEC -6 dB is active");
387 memcpy (&output[1], "Long AEC -6 dB is active", 24);
388
389 /* end of string list */
390 output [25] = (CHAR) 0xff;
391 csf_aec_enable(0x028B);
392 }
393
394 else if (!strncmp(command, "0293", 4))
395 {
396 output[0] = strlen ("Long AEC -12 dB is active");
397 memcpy (&output[1], "Long AEC -12 dB is active", 25);
398
399 /* end of string list */
400 output [26] = (CHAR) 0xff;
401 csf_aec_enable(0x0293);
402 }
403
404 else if (!strncmp(command, "029B", 4))
405 {
406 output[0] = strlen ("Long AEC -18 dB is active");
407 memcpy (&output[1], "Long AEC -18 dB is active", 25);
408
409 /* end of string list */
410 output [26] = (CHAR) 0xff;
411 csf_aec_enable(0x029B);
412 }
413
414 else if (!strncmp(command, "0105", 4))
415 {
416 output[0] = strlen ("Noise reduction is active");
417 memcpy (&output[1], "Noise reduction is active", 25);
418
419 /* end of string list */
420 output [26] = (CHAR) 0xff;
421 csf_aec_enable(0x0105);
422 }
423
424 else if (!strncmp(command, "0125", 4))
425 {
426 output[0] = strlen ("Noise reduction -6 dB is active");
427 memcpy (&output[1], "Noise reduction -6 dB is active", 31);
428
429 /* end of string list */
430 output [32] = (CHAR) 0xff;
431 csf_aec_enable(0x0125);
432 }
433
434 else if (!strncmp(command, "0145", 4))
435 {
436 output[0] = strlen ("Noise reduction -12 dB is active");
437 memcpy (&output[1], "Noise reduction -12 dB is active", 32);
438
439 /* end of string list */
440 output [33] = (CHAR) 0xff;
441 csf_aec_enable(0x0145);
442 }
443
444 else if (!strncmp(command, "0165", 4))
445 {
446 output[0] = strlen ("Noise reduction -18 dB is active");
447 memcpy (&output[1], "Noise reduction -18 dB is active", 32);
448
449 /* end of string list */
450 output [33] = (CHAR) 0xff;
451 csf_aec_enable(0x0165);
452 }
453
454 else if (!strncmp(command, "0187", 4))
455 {
456 output[0] = strlen ("Both AEC and Noise reduction are active");
457 memcpy (&output[1], "Both AEC and Noise reduction are active", 39);
458
459 /* end of string list */
460 output [40] = (CHAR) 0xff;
461 csf_aec_enable(0x0187);
462 }
463
464 else if (!strncmp(command, "0001", 4))
465 {
466 output[0] = strlen ("AEC and Noise reduction are unactivated");
467 memcpy (&output[1], "AEC and Noise reduction are unactivated", 39);
468
469 /* end of string list */
470 output [40] = (CHAR) 0xff;
471 csf_aec_enable(0x0001);
472 }
473
474 else
475 {
476 output[0] = strlen ("Bad AT command");
477 memcpy (&output[1], "Bad AT command", 14);
478
479 /* end of string list */
480 output [15] = (CHAR) 0xff;
481 }
482
483 }
484
485
486
487
488 /*
489 +--------------------------------------------------------------------+
490 | PROJECT : GSM-PS (6147) MODULE : CST_EXTS |
491 | STATE : code ROUTINE : rAT_EXT |
492 +--------------------------------------------------------------------+
493
494 PURPOSE : This function is called by the interpreter part of the
495 ACI in case of the detection of an unknown command.
496
497 <cmd> : remaining unparsed command string.
498 <cmdLen> : length of command string. This value must be
499 incremented by the amount of parsed characters
500 by this function.
501 <out> : this parameter can be used to display some
502 strings at the AT command interface.
503 The first char of one string must contain
504 the length of the following string. The
505 special length 0xff must be used to define
506 the end of the string list.
507 <outLen> : maximum length of output buffer referenced
508 by parameter <out>.
509
510 */
511
512 GLOBAL T_ACI_RETURN rAT_EXT (
513 CHAR* cmd,
514 USHORT* cmdLen,
515 CHAR* out,
516 USHORT outLen
517 )
518 {
519 /*
520 * store command string in case it will be needed later on, when
521 * result code of this function is equal to AT_EXCT
522 */
523 extCmd = cmd;
524 extCmdLen = *cmdLen;
525
526 /*
527 * example how to send an unsolicited result code via the AT interface
528 */
529 ext_CreatePString ( extBuffer, EXT_ENTER );
530
531 sAT_URC ( extBuffer );
532
533 /*
534 * example how to process the command AT%H
535 */
536 if (*cmd == '%')
537 {
538 cmd++;
539
540 switch (*cmd)
541 {
542 case 'A':
543 /*
544 * Display AD conversions results
545 */
546 *cmdLen -= 2;
547 show_adc_conversion(out);
548 return( AT_CMPL );
549
550 case 'C':
551 case 'c':
552 case 'D':
553 case 'd':
554 {
555 CHAR* nextCmd;
556
557 *cmdLen -= 2;
558
559 switch ( *cmd )
560 {
561 case 'C':
562 case 'c':
563 /* dynamic configuration via AT command interface */
564 nextCmd = percentCFG ( ++cmd );
565
566 break;
567
568 case 'D':
569 case 'd':
570 /* set debug pin for reset purposes */
571 nextCmd = percentDBG ( ++cmd );
572
573 break;
574 }
575
576 *out = ( CHAR ) 0xFF;
577
578 if ( nextCmd EQ NULL )
579 {
580 return ( AT_FAIL );
581 }
582 else
583 {
584 *cmdLen -= ( nextCmd - cmd );
585
586 return ( AT_CMPL );
587 }
588 }
589
590 case 'N':
591 /*
592 * Enables the AEC by sending a primitive to L1A
593 */
594 *cmdLen -= 6;
595 AEC_Enable(cmd, out);
596 return( AT_CMPL );
597
598 //---------------------------------------------------------------------------//
599 // Added by Matthieu Vanin for the test of melody E2/E1
600 //---------------------------------------------------------------------------//
601
602
603
604 // End
605 //---------------------------------------------------------------------------//
606 case 'S':
607 case 's':
608 {
609 cmd++;
610
611 switch (*cmd) {
612
613 case 'e':
614 case 'E':
615 /* 's''e' already detected => assume the command is at%ser. */
616 {
617 cmd += 3; /* Discard the following characters */
618 *cmdLen -= 9;
619 if (SER_WriteConfig (cmd, (BOOL) (*(cmd + 3) - '0')))
620 return( AT_CMPL );
621 else
622 return( AT_FAIL );
623 }
624
625 case 'w':
626 case 'W':
627 /* 's''w' already detected => assume the command is at%switch. */
628 {
629 *cmdLen -= 7;
630 if (SER_ImmediateSwitch())
631 return( AT_CMPL );
632 else
633 return( AT_FAIL );
634 }
635
636 case 'l':
637 case 'L':
638 /* 's''l' already detected => assume the command is at%sleep. */
639 {
640 cmd += 5; /* Discard the following characters */
641 *cmdLen -= 8;
642 /*
643 * Checks if the parameter is valid:
644 * 0 -> NO_SLEEP
645 * 1 -> SMALL_SLEEP
646 * 2 -> BIG_SLEEP
647 * 3 -> DEEP_SLEEP
648 * 4 -> ALL_SLEEP
649 */
650
651 if (((*cmd - '0') >= 0) && ((*cmd - '0') <= 4))
652 {
653 power_down_config ((UBYTE) (*cmd - '0'), UWIRE_CLK_CUT);
654 return( AT_CMPL );
655 }
656 else
657 return( AT_FAIL );
658 }
659
660 default:
661 *cmdLen -= 2;
662 return ( AT_FAIL );
663
664 }
665 }
666
667 case 'H':
668 *cmdLen -= 2;
669
670 /*
671 * here you can perform some actions with drivers etc.
672 */
673
674 /*
675 * and create some additional output at the AT interface
676 * The strings:
677 *"Hello"
678 *""
679 *"World"
680 * will be displayed at the terminal.
681 *
682 * first string Hello
683 */
684 out[0] = strlen ("Hello");
685 memcpy (&out[1], "Hello", 5);
686 /*
687 * add a spare line with an empty string
688 */
689 out [6] = 0;
690 /*
691 * second string World
692 */
693 out [7] = strlen ("World");
694 memcpy (&out[8], "World", 5);
695
696 /*
697 * end of string list
698 */
699 out [13] = (CHAR) 0xff;
700 return( AT_CMPL );
701
702 #ifndef WIN32
703 case 'R':
704 case 'r':
705 *cmdLen -= 2;
706 l1dmacro_init_hw();
707 out[0] = 0;
708 out[1] = (CHAR) 0xFF;
709 return( AT_CMPL );
710 #endif
711
712 #ifndef WIN32
713 case 'V':
714 case 'v':
715 *cmdLen -= 2;
716
717 /*
718 * Display version numbers
719 */
720
721 cmh_show_version (cmd, cmdLen, out);
722 return( AT_CMPL );
723 #endif
724 #if defined (ALR)
725 case 'T':
726 case 't':
727 /*
728 * Enables RTC or AUDIO tests
729 */
730 cmd++;
731 *cmdLen -= 3;
732 if (!strncmp(cmd, "A", 1) || !strncmp(cmd, "a", 1))
733 {
734 //audio_test_misc();
735 out[0] = 22;
736 memcpy (&out[1], "Performing Audio Tests", 22);
737 out [23] = (CHAR) 0xff;
738 }
739 else
740 {
741 if (!strncmp(cmd, "R", 1) || !strncmp(cmd, "r", 1))
742 {
743 //rtc_test_misc();
744 out[0] = 20;
745 memcpy (&out[1], "Performing RTC Tests", 20);
746 out [21] = (CHAR) 0xff;
747 }
748 else
749 return( AT_FAIL );
750 }
751 return( AT_CMPL );
752 #endif
753 default:
754 *cmdLen -= 2;
755 return ( AT_FAIL );
756 }
757 }
758 else if ( *cmd EQ 'D' )
759 {
760 T_ACI_RETURN rslt;
761
762 /*
763 * this is only a test implementation. As soon as a "ATD" command
764 * string is detected in the AT interpreter and the mobile is not
765 * yet registered (neither limited nor full service is availbale)
766 * this function is called. Then instead of dialling immediately
767 * an activation of the mobile is performed in advance.
768 */
769 strncpy ( extDialNum, cmd + 1, MINIMUM ( MAX_PHB_NUM_LEN - 1,
770 *cmdLen - 1 ) );
771 extDialNum[MINIMUM ( MAX_PHB_NUM_LEN - 1, *cmdLen - 1 )] = '\0';
772
773 extCmdLen = 0;
774 *cmdLen = 0;
775
776 rslt = sAT_PlusCFUN ( CMD_SRC_LCL,
777 CFUN_FUN_Full,
778 CFUN_RST_NotPresent );
779
780 if ( rslt EQ AT_EXCT )
781 {
782 /*
783 * generate some output at the AT interface
784 */
785 ext_CreatePString ( out, EXT_ATCFUN );
786
787 /*
788 * indicating that an extended AT command is still in progress
789 */
790 currExtCmd = AT_CMD_CFUN;
791 }
792 else
793 {
794 ext_LeaveEXT ( TRUE );
795 rCI_PlusCME ( AT_CMD_EXT, CME_ERR_Unknown );
796 }
797
798 return ( rslt );
799 }
800 else
801 return( AT_FAIL );
802 }
803
804 /*
805 +--------------------------------------------------------------------+
806 | PROJECT : GSM-PS (6147) MODULE : CST_EXTS |
807 | STATE : code ROUTINE : percentCFG |
808 +--------------------------------------------------------------------+
809
810 PURPOSE : %CFG command (enables dynamic configuration of the
811 protocol stack using the AT command interface)
812 */
813
814 EXTERN char *parse (char *b, char *f, ...);
815
816 GLOBAL SHORT cc_pei_config (char * inString,
817 char * outString);
818 GLOBAL SHORT cst_pei_config (char * inString,
819 char * outString);
820 GLOBAL SHORT dl_pei_config (char * inString,
821 char * outString);
822 GLOBAL SHORT mm_pei_config (char * inString,
823 char * outString);
824 GLOBAL SHORT rr_pei_config (char * inString,
825 char * outString);
826 GLOBAL SHORT sim_pei_config (char * inString,
827 char * outString);
828 GLOBAL SHORT sms_pei_config (char * inString,
829 char * outString);
830 GLOBAL SHORT ss_pei_config (char * inString,
831 char * outString);
832 GLOBAL SHORT pl_pei_config (char * inString,
833 char * outString);
834
835 #ifdef FAX_AND_DATA
836 GLOBAL SHORT fad_pei_config (char * inString,
837 char * outString);
838 GLOBAL SHORT l2r_pei_config (char * inString,
839 char * outString);
840 GLOBAL SHORT ra_pei_config (char * inString,
841 char * outString);
842 GLOBAL SHORT rlp_pei_config (char * inString,
843 char * outString);
844 GLOBAL SHORT t30_pei_config (char * inString,
845 char * outString);
846 #endif
847
848 GLOBAL CHAR* percentCFG ( CHAR* cl )
849 {
850 CHAR entity[5];
851 CHAR config[40];
852 CHAR dummy;
853
854 TRACE_FUNCTION ( "percentCFG()" );
855
856 switch ( *cl )
857 {
858 case('='):
859 {
860 cl++;
861
862 cl = parse ( cl, "ss", ( LONG )sizeof(entity), entity,
863 ( LONG )sizeof(config), config );
864
865 if( !cl OR
866 *entity EQ '\0' OR
867 *config EQ '\0' )
868 {
869 return ( NULL );
870 }
871
872 break;
873 }
874
875 default:
876 {
877 return ( NULL );
878 }
879 }
880
881 if ( strcmp ( entity, CC_NAME ) EQ 0 )
882 {
883 cc_pei_config ( config, &dummy );
884 }
885 else if ( strcmp ( entity, CST_NAME ) EQ 0 )
886 {
887 cst_pei_config ( config, &dummy );
888 }
889 else if ( strcmp ( entity, DL_NAME ) EQ 0 )
890 {
891 dl_pei_config ( config, &dummy );
892 }
893 else if ( strcmp ( entity, MM_NAME ) EQ 0 )
894 {
895 mm_pei_config ( config, &dummy );
896 }
897 else if ( strcmp ( entity, RR_NAME ) EQ 0 )
898 {
899 rr_pei_config ( config, &dummy );
900 }
901 else if ( strcmp ( entity, SIM_NAME ) EQ 0 )
902 {
903 sim_pei_config ( config, &dummy );
904 }
905 else if ( strcmp ( entity, SMS_NAME ) EQ 0 )
906 {
907 sms_pei_config ( config, &dummy );
908 }
909 else if ( strcmp ( entity, SS_NAME ) EQ 0 )
910 {
911 ss_pei_config ( config, &dummy );
912 }
913 else if ( strcmp ( entity, PL_NAME ) EQ 0 )
914 {
915 pl_pei_config ( config, &dummy );
916 }
917
918 #ifdef FAX_AND_DATA
919
920 else if ( strcmp ( entity, FAD_NAME ) EQ 0 )
921 {
922 fad_pei_config ( config, &dummy );
923 }
924 else if ( strcmp ( entity, L2R_NAME ) EQ 0 )
925 {
926 l2r_pei_config ( config, &dummy );
927 }
928 else if ( strcmp ( entity, RA_NAME ) EQ 0 )
929 {
930 ra_pei_config ( config, &dummy );
931 }
932 else if ( strcmp ( entity, RLP_NAME ) EQ 0 )
933 {
934 rlp_pei_config ( config, &dummy );
935 }
936 else if ( strcmp ( entity, T30_NAME ) EQ 0 )
937 {
938 t30_pei_config ( config, &dummy );
939 }
940
941 #endif
942
943 else
944 {
945 return ( NULL );
946 }
947
948 return ( cl );
949 }
950
951 /*
952 +--------------------------------------------------------------------+
953 | PROJECT : GSM-PS (6147) MODULE : CST_EXTS |
954 | STATE : code ROUTINE : percentDBG |
955 +--------------------------------------------------------------------+
956
957 PURPOSE : %RST command (simulates pressing the reset button
958 of the ASample)
959 */
960
961 #ifndef TRACE_PORT_TIMING
962 #ifdef _TMS470
963 #if (CHIPSET == 0)
964 EXTERN void l1s_set_debug_pin ( UBYTE, UBYTE );
965 #endif
966 #endif
967 #endif
968
969 GLOBAL CHAR* percentDBG ( CHAR* cl )
970 {
971 SHORT line = 1;
972 SHORT polarity = 1;
973 SHORT delay = 650;
974
975 TRACE_FUNCTION ( "atPercentDBG()" );
976
977 switch ( *cl )
978 {
979 case( '\0' ):
980 {
981 break;
982 }
983
984 case('='):
985 {
986 cl++;
987
988 cl = parse ( cl, "rrr", &line, &polarity, &delay );
989
990 if( !cl OR
991 polarity < 0 OR polarity > 1 OR
992 line < 0 OR line > 7 OR
993 delay < 0 )
994 {
995 return ( NULL );
996 }
997
998 break;
999 }
1000
1001 default:
1002 {
1003 return ( NULL );
1004 }
1005 }
1006
1007 #ifndef TRACE_PORT_TIMING
1008 #ifdef _TMS470
1009 #if (CHIPSET == 0)
1010 #if defined (NEW_FRAME)
1011 vsi_t_sleep ( VSI_CALLER ( T_TIME ) delay );
1012 #else
1013 vsi_t_sleep ( VSI_CALLER ( T_VSI_TVALUE ) delay );
1014 #endif
1015
1016 l1s_set_debug_pin ( ( UBYTE ) line, ( UBYTE ) polarity );
1017 #endif
1018 #endif
1019 #endif
1020
1021 return ( cl );
1022 }
1023
1024 /*
1025 +--------------------------------------------------------------------+
1026 | PROJECT : GSM-PS (6147) MODULE : CMH_EXTS |
1027 | STATE : code ROUTINE : rAT_ACP |
1028 +--------------------------------------------------------------------+
1029
1030 PURPOSE : This function is called by the interpreter part of the
1031 ACI in case of aborting a pending extension command.
1032
1033 <out> : this parameter can be used to display some
1034 strings at the AT command interface.
1035 The first char of one string must contain
1036 the length of the following string. The
1037 special length 0xff must be used to define
1038 the end of the string list.
1039 <outLen> : maximum length of output buffer referenced
1040 by parameter <out>.
1041
1042 */
1043
1044 GLOBAL T_ACI_RETURN rAT_ACP (
1045 CHAR* out,
1046 USHORT outLen
1047 )
1048 {
1049 T_ACI_RETURN rslt = AT_CMPL;
1050
1051 /* call the abort function if necessary */
1052 if ( currExtCmd NEQ AT_CMD_NONE )
1053 rslt = sAT_Abort (CMD_SRC_LCL, currExtCmd );
1054
1055 switch ( rslt )
1056 {
1057 case ( AT_CMPL ):
1058 {
1059 currExtCmd = AT_CMD_NONE;
1060
1061 ext_LeaveEXT ( TRUE );
1062 }
1063 break;
1064
1065 case ( AT_EXCT ):
1066 {
1067 currExtCmd = AT_CMD_ABRT;
1068 }
1069 break;
1070
1071 default:
1072 {
1073 /* do nothing */
1074 }
1075 break;
1076 }
1077
1078 return rslt;
1079 }
1080
1081 /*
1082 +--------------------------------------------------------------------+
1083 | PROJECT : GSM-PS (6147) MODULE : CMH_EXTS |
1084 | STATE : code ROUTINE : ext_OK |
1085 +--------------------------------------------------------------------+
1086
1087 PURPOSE : This function is called by the MMI in case the positive
1088 result of the asynchronous command handling is available.
1089
1090 <cmdId>: command identity
1091
1092 */
1093 GLOBAL void ext_OK ( T_ACI_AT_CMD cmdId )
1094 {
1095 T_ACI_RETURN rslt;
1096
1097 if ( cmdId EQ AT_CMD_CFUN AND currAbrtCmd EQ AT_CMD_NONE )
1098 {
1099 rslt = sAT_PlusCOPS ( CMD_SRC_LCL,
1100 COPS_MOD_Auto,
1101 COPS_FRMT_NotPresent,
1102 NULL );
1103
1104 if ( rslt EQ AT_EXCT )
1105 {
1106 /*
1107 * generate some output at the AT interface
1108 */
1109 ext_CreatePString ( extBuffer, EXT_ATCOPS_START );
1110
1111 sAT_URC ( extBuffer );
1112
1113 /*
1114 * indicating that an extended AT command is still in progress
1115 */
1116 currExtCmd = AT_CMD_COPS;
1117 }
1118 else
1119 {
1120 ext_LeaveEXT ( TRUE );
1121 rCI_PlusCME ( AT_CMD_EXT, CME_ERR_Unknown );
1122 }
1123 }
1124 else if ( cmdId EQ AT_CMD_COPS AND currAbrtCmd EQ AT_CMD_NONE )
1125 {
1126 currExtCmd = AT_CMD_NONE;
1127
1128 /*
1129 * generate some output at the AT interface
1130 */
1131 ext_CreatePString ( extBuffer, EXT_ATCOPS_STOP );
1132
1133 sAT_URC ( extBuffer );
1134
1135 #ifndef WIN32
1136 ext_ContinueTest ( EXT_DIAL_VOICE_PASS );
1137 #endif
1138 }
1139 else if ( cmdId EQ AT_CMD_D AND currAbrtCmd EQ AT_CMD_NONE )
1140 {
1141 extCallId = 1;
1142
1143 ext_LeaveEXT ( TRUE );
1144 rCI_OK ( AT_CMD_EXT );
1145 }
1146 else if ( currAbrtCmd NEQ AT_CMD_NONE )
1147 {
1148 currAbrtCmd = AT_CMD_NONE;
1149
1150 ext_LeaveEXT ( TRUE );
1151 rCI_OK ( AT_CMD_EXT );
1152 }
1153 else
1154 {
1155 /*
1156 * generate some output at the AT interface
1157 */
1158 ext_CreatePString ( extBuffer, EXT_UNEXPCTD );
1159
1160 sAT_URC ( extBuffer );
1161 }
1162 }
1163
1164 /*
1165 +--------------------------------------------------------------------+
1166 | PROJECT : GSM-PS (6147) MODULE : CMH_EXTS |
1167 | STATE : code ROUTINE : ext_LeaveExtension |
1168 +--------------------------------------------------------------------+
1169
1170 PURPOSE : This function is called in case the extensin mechansim
1171 should be left finally.
1172
1173 <final>: indicates whether final result code should be
1174 sent explicitly
1175
1176 */
1177 LOCAL void ext_LeaveEXT ( BOOL final )
1178 {
1179 /*
1180 * generate some output at the AT interface
1181 */
1182 ext_CreatePString ( extBuffer, EXT_LEAVE );
1183
1184 /*
1185 * indicating that no extended AT command is still in progress
1186 */
1187 currExtCmd = AT_CMD_NONE;
1188
1189 /*
1190 * indicate end of extended command handling to the AT interpreter
1191 */
1192 sAT_URC ( extBuffer );
1193
1194 if ( final )
1195 {
1196 sAT_FRI ( extCmdLen );
1197 }
1198 }
1199
1200 /*
1201 +--------------------------------------------------------------------+
1202 | PROJECT : GSM-PS (6147) MODULE : CMH_EXTS |
1203 | STATE : code ROUTINE : ext_ContinueTest |
1204 +--------------------------------------------------------------------+
1205
1206 PURPOSE : This function is called in case the AT extension
1207 procedure should be continued.
1208
1209 <id>: identifies the specific procedure to be continued
1210
1211 */
1212 GLOBAL void ext_ContinueTest ( CHAR* id )
1213 {
1214 T_ACI_RETURN rslt;
1215
1216 if ( strcmp ( id, EXT_DIAL_VOICE_PASS ) EQ 0 )
1217 {
1218 T_ACI_D_TOC callType = D_TOC_Data;
1219
1220 if ( extDialNum [strlen ( extDialNum ) - 1] EQ EXT_VOICE_DELIMITER )
1221 callType = D_TOC_Voice;
1222
1223 extDialNum[strlen ( extDialNum ) - 1] = '\0';
1224
1225 rslt = sAT_Dn ( CMD_SRC_LCL,
1226 extDialNum,
1227 D_CLIR_OVRD_Default,
1228 D_CUG_CTRL_NotPresent,
1229 callType );
1230
1231 if ( rslt EQ AT_EXCT )
1232 {
1233 /*
1234 * generate some output at the AT interface
1235 */
1236 ext_CreatePString ( extBuffer, EXT_ATD );
1237
1238 sAT_URC ( extBuffer );
1239
1240 /*
1241 * indicating that an extended AT command is still in progress
1242 */
1243 currExtCmd = AT_CMD_D;
1244 }
1245 else
1246 {
1247 ext_LeaveEXT ( TRUE );
1248 rCI_PlusCME ( AT_CMD_EXT, CME_ERR_Unknown );
1249 }
1250 }
1251 }
1252
1253 /*
1254 +--------------------------------------------------------------------+
1255 | PROJECT : GSM-PS (6147) MODULE : CMH_EXTS |
1256 | STATE : code ROUTINE : ext_CreatePString |
1257 +--------------------------------------------------------------------+
1258
1259 PURPOSE :
1260
1261 */
1262 LOCAL void ext_CreatePString ( CHAR* buffer, CHAR* text )
1263 {
1264 buffer[0] = strlen (text);
1265 memcpy (&buffer[1], text, buffer[0]);
1266 buffer [buffer[0]+1] = (CHAR) 0xff;
1267 }