tcs211-pirelli: g23m/condat/ms/src/aci/ati

comparison g23m/condat/ms/src/aci/ati_bas.c @ 0:509db1a7b7b8

initial import: leo2moko-r1

author	Space Falcon <falcon@ivan.Harhan.ORG>
date	Mon, 01 Jun 2015 03:24:05 +0000
parents
children

comparison

equal deleted inserted replaced

--1:000000000000
+:509db1a7b7b8
+/*
++-----------------------------------------------------------------------------
+|  Project :  GSM-F&D (8411)
+|  Modul   :  ATI
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  AT Command Interpreter: basic functions.
++-----------------------------------------------------------------------------
+*/
+#ifndef ATI_BAS_C
+#define ATI_BAS_C
+#include "aci_all.h"
+#include <ctype.h>
+#include <string.h>
+#include "aci_cmh.h"
+#include "ati_cmd.h"
+#include "aci_cmd.h"
+#include "aci_io.h"
+#include "aci_cmd.h"
+#include "l4_tim.h"
+#include "line_edit.h"
+#include "aci_lst.h"
+#include "pcm.h"
+#include "audio.h"
+#include "aci.h"
+#include "rx.h"
+#include "pwr.h"
+#include "l4_tim.h"
+#ifdef GPRS
+#ifdef DTI
+#include "dti.h"
+#include "dti_conn_mng.h"
+#include "dti_cntrl_mng.h"
+#endif /* DTI */
+#include "gaci.h"
+#include "gaci_cmh.h"
+#include "gaci_cmd.h"
+#endif  /* GPRS */
+#include "aci_mem.h"
+#include "aci_prs.h"
+#include "ati_int.h"
+#ifndef _SIMULATION_
+#include "ffs\ffs.h"
+#endif
+#ifdef FF_ATI_BAT
+#include "typedefs.h"
+#include "gdd.h"
+#include "bat.h"
+#include "ati_bat.h"
+#endif /*FF_ATI_BAT*/
+LOCAL T_ATI_RSLT aciPrcsPlusCG (UBYTE srcId, CHAR* cl, CHAR* ef);
+LOCAL T_ATI_RSLT setaciPrcsVolLevel ( CHAR* cl, UBYTE device );
+LOCAL T_ATI_RSLT tesaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device );
+LOCAL T_ATI_RSLT queaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device );
+EXTERN T_ATI_RSLT setatPlusCLIP (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCOLP (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPercentCREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCGREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPercentCGREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCCLK (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT queatPlusCCLK (char *cl, UBYTE srcId);
+/* for atAndF */
+EXTERN void ati_cmd_reset(UBYTE srcId);
+GLOBAL const  T_ACI_AT_CMD atw_cmd_list [] = {AT_CMD_CGREG, AT_CMD_CLIP, AT_CMD_CLIR,
+AT_CMD_COLP, AT_CMD_CREG, AT_CMD_ALS, AT_CMD_CGAATT,
+AT_CMD_P_CGREG, AT_CMD_CPI, AT_CMD_P_CREG, AT_CMD_NONE};
+#define MAX_IDX_LTH (10)
+#define MAX_ATW_STORED_PROFILE 2 /*profile number for AT&W*/
+#define MAX_ATW_CMD_NAM_LEN 15     /*Max command name length in bytes, e.g. %CGAATT;*/
+#define MAX_ONE_ATW_PRO_LEN 50      /*Max profile length of 1 command  in bytes,so far %CGAATT has the longest
+profile length /CmdId/Total Len/token/1st Para length/1st para/token/2nd para length/2nd para/'\0'/*/
+#define STRING 1                        /*Token: string*/
+#define SIGNED_VALUE 2             /*Token: signed value*/
+#define UNSIGNED_VALUE 3         /*Token: unsigned value*/
+#define MAX_ATW_CHOSEN_CMD_NB  (sizeof(atw_cmd_list)/sizeof(T_ACI_AT_CMD) -1)
+/*Max number of AT commands can be chosen by user, -1 because the last entry is only an ending symbol*/
+/* for profile handling ATZ and AT&W */
+#ifdef _SIMULATION_
+LOCAL CHAR  atw_cmd_list_simu [(MAX_ATW_CMD_NAM_LEN) *( MAX_ATW_CHOSEN_CMD_NB) + 1] = {'\0'};
+LOCAL UBYTE atw_profile_simu [MAX_ATW_STORED_PROFILE][(MAX_ATW_CHOSEN_CMD_NB) * (MAX_ONE_ATW_PRO_LEN)+1]={{'\0'},{'\0'}};
+/* simulates the profile arrays  for windows test*/
+#endif
+static UBYTE ATZprofile;
+GLOBAL const DBG_Memory dbg_mem_names[] =
+{
+{"PRI",  P_DBGINFO_PrimPoolPartition},
+{"MEM",  P_DBGINFO_DmemPoolPartition},
+{"DAT",  P_DBGINFO_DataPoolPartition},
+{0, 0}
+};
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atBW               |
++--------------------------------------------------------------------+
+PURPOSE : B command (only implemented to maintain compability)
+W command (only implemented to maintain compability)
+*/
+GLOBAL T_ATI_RSLT atBW(char *cl, UBYTE srcId)
+{
+SHORT i=0;
+TRACE_FUNCTION("atB()");
+while (*cl >= '0' AND *cl <= '9')
+{
+cl++;
+i++;
+if (i > 1)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+}
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atE                |
++--------------------------------------------------------------------+
+PURPOSE : E command (command echo setting)
+F command (data echo setting)
+L command (Speaker Volume)
+M command (Speaker Mode)
+Q command (result code supression)
+V command (verbose response setting)
+X command (Busy/Dial tone indication)
+*/
+GLOBAL T_ATI_RSLT atEFLMQVX(char *cl, UBYTE srcId)
+{
+char  *end   = NULL;
+UBYTE value  = 0;
+CHAR  letter = *(cl - 1);
+T_LEDIT line = {0xFF, 0xFF,  0xFF, 0xFF, 0xFF}; /* init with values which say: do not change */
+/* S3      S4     S5   atE  smsEnd */
+TRACE_FUNCTION("atEFLMQVX()");
+TRACE_EVENT_P1 ("letter = %02X", letter);
+value = (UBYTE)strtol(cl, &end, 10);
+if(*end )
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+switch(letter)
+{
+case('E'):
+if (value > 1)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+ati_user_output_cfg[srcId].atE = value;
+/*
+* line edit need this piece of information, as well
+*/
+line.atE = ati_user_output_cfg[srcId].atE;
+ledit_set_config (srcId, line);
+return ATI_CMPL; /* return to prevent non used p at the end of this function */
+case('F'):
+break;
+case('L'):
+if (value > 3)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+at.s1415.atL = value;
+break;
+case('M'):
+if (value > 2)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+at.s1415.atM = value;
+break;
+case('Q'):
+if (value > 1)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+ati_user_output_cfg[srcId].atQ = value;
+break;
+case('V'):
+if (value > 1)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+at.s1415.atV = value;
+break;
+case('X'):
+if (value > 4)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+ati_user_output_cfg[srcId].atX = value;
+break;
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PRIJECT : GSM-F&D (8411)              MIDULE  : ACI_CMD            |
+| STATE   : code                        RIUTINE : atI                |
++--------------------------------------------------------------------+
+PURPOSE : I command (identification)
+*/
+GLOBAL T_ATI_RSLT atI(char *cl, UBYTE srcId)
+{
+CHAR*             ef          = EF_INF0_ID;
+pcm_FileInfo_Type fileInfo;
+USHORT            value;
+USHORT            maxRecords;
+USHORT            i;
+TRACE_FUNCTION("atI()");
+parse (cl, "r", &value);
+if (!cl)
+{
+value = 0;
+}
+/*
+* The switch case here is intended for values which are reserved for
+* the protocol stack manufacturer and cannot be overridden by values
+* in the PCM/FFS.
+*/
+switch (value)
+{
+case 99:
+io_sendMessage(srcId, "Texas Instruments", ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+default:
+break;
+}
+if (pcm_GetFileInfo ((UBYTE*)ef, &fileInfo) NEQ DRV_OK)
+{
+cmdCmeError (CME_ERR_MemFail);
+return ATI_FAIL;
+}
+if (pcm_ReadRecord ((UBYTE*)ef, (USHORT)(value + 1), fileInfo.FileSize,
+(UBYTE*)g_sa, &fileInfo.Version, &maxRecords) NEQ DRV_OK)
+{
+cmdCmeError (CME_ERR_MemFail);
+return ATI_FAIL;
+}
+i = 0;
+while ((UBYTE)g_sa[i] NEQ 0xFF)
+{
+i++;
+}
+g_sa[i] = '\0';
+io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT );
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atTP               |
++--------------------------------------------------------------------+
+PURPOSE : TP command (select tone/pulse dialing < only implemented to
+maintain compability>)
+*/
+GLOBAL T_ATI_RSLT atTP(char *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("atTP()");
+if (*cl >= '0' AND *cl <= '9')
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+else
+{
+return ATI_CMPL;
+}
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atS                |
++--------------------------------------------------------------------+
+PURPOSE : S command (S register setting)
+*/
+GLOBAL T_ATI_RSLT atS(char *cl, UBYTE srcId)
+{
+SHORT reg_num,reg_cont,i=0;
+char cont[4];
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+T_LEDIT line = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; /* init with values, which say: do not change */
+T_ATI_RSLT retcd  = ATI_CMPL;
+TRACE_FUNCTION("atS()");
+reg_num=0;
+while (isdigit (*cl))
+{
+reg_num *= 10;
+reg_num += *cl-'0';
+++cl;
+}
+switch (*cl)
+{
+case('?'):
+{
+cl++;
+switch (reg_num)
+{
+case 0:                               /* supported registers for read access are listed here */
+case 1:
+case 2:
+case 3:
+case 4:
+case 5:
+case 6:
+case 7:
+case 8:
+case 10: reg_cont = at.S[reg_num]; break;  /* index access register */
+case 30: reg_cont = at.S30; break;         /* direct access register */
+#ifdef GPRS
+case 99: reg_cont = at.S99; break;
+#endif /* GPRS */
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+sprintf(g_sa,"%03d", reg_cont);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+case('='):
+{
+cl++;
+if(*cl EQ '?')
+{
+cl++;
+switch(reg_num)
+{
+case(0):  sprintf(g_sa,"S%d:%s",reg_num,"(0-255)"); break;
+/*case(1):*/ /* S1 register is read only !!! */
+case(2):
+case(3):
+case(4):
+case(5):  sprintf(g_sa,"S%d:%s",reg_num,"(0-127)"); break;
+case(6):  sprintf(g_sa,"S%d:%s",reg_num,"(2-10)");  break;
+case(7):  sprintf(g_sa,"S%d:%s",reg_num,"(1-255)"); break;
+case(8):  sprintf(g_sa,"S%d:%s",reg_num,"(0-255)"); break;
+case(10):
+case(30): sprintf(g_sa,"S%d:%s",reg_num,"(1-254)"); break;
+#ifdef GPRS
+case(31): sprintf(g_sa,"S%d:%s",reg_num,"(0-255)"); break;
+#endif /* GPRS */
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+else
+{
+while (*cl >= '0' AND *cl <= '9' AND i < 3)
+{
+cont[i] = (*cl);
+i++;
+cl++;
+}
+if (!i)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+cont[i]='\0';
+reg_cont=atoi(cont);
+switch(reg_num)
+{
+case(0):
+if (reg_cont<0 OR reg_cont > 255)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+at.rngPrms.srcID_S0 = srcId;
+#if defined (GPRS) AND defined (DTI)
+/*
+*  Special case of implict attach to GACI when S0 is set to
+*  Non-zero value. GSM 7.07 version 6.4.0  10.2.2.1
+*/
+if ( reg_cont > 0 )
+{
+T_CGCLASS_CLASS m_class;
+T_ACI_RETURN ret;
+if (AT_CMPL NEQ qAT_PlusCGCLASS(srcId, &m_class))
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+/*
+*  no GPRS attach requested if only GSM mobile
+*/
+if ( CGCLASS_CLASS_CC NEQ m_class)
+{
+ret = sAT_PlusCGATT ( srcId, CGATT_STATE_ATTACHED );
+switch (ret)
+{
+case (AT_CMPL):                         /*operation completed*/
+break;
+case (AT_EXCT):
+src_params->curAtCmd    = AT_CMD_CGATT;
+retcd = ATI_EXCT;
+break;
+default:
+cmdAtError(atError);                  /*Command failed*/
+return ATI_FAIL;
+}
+}
+}
+#endif  /* GPRS */
+break;
+case(2):
+if (reg_cont<0 OR reg_cont > 127)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+break;
+case(3):
+if (reg_cont<0 OR reg_cont > 127)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+line.S3  = (UBYTE)reg_cont;
+break;
+case(4):
+if (reg_cont<0 OR reg_cont > 127)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+line.S4  = (UBYTE)reg_cont;
+break;
+case(5):
+if (reg_cont<0 OR reg_cont > 127)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+line.S5  = (UBYTE)reg_cont;
+break;
+case(6):
+if (reg_cont<2 OR reg_cont > 10)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+break;
+case(7):
+if (reg_cont<1 OR reg_cont > 255)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+break;
+case(8):
+if (reg_cont<0 OR reg_cont > 255)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+break;
+case(10):
+if (reg_cont<1 OR reg_cont > 254)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+break;
+case(30):
+if (reg_cont<0 OR reg_cont > 254)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+break;
+#if defined (GPRS) AND defined (DTI)
+case(99):
+			  if (reg_cont<0 OR reg_cont > 255)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+break;
+#endif /* GPRS */
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+switch (reg_num)
+{
+case 0:                                       /* supported registers for write access are listed here */
+/*case 1: Read Only */
+case 2:
+case 3:
+case 4:
+case 5:
+case 6:
+case 7:
+case 8:
+case 10: at.S[reg_num]=(UBYTE)reg_cont; break;
+case 30: at.S30       =(UBYTE)reg_cont; break;
+#if defined (GPRS) AND defined (DTI)
+case 99: at.S99       =(UBYTE)reg_cont; break;
+#endif
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+/*
+* line edit need this piece of information, as well
+*/
+ledit_set_config (srcId, line);
+break;
+}
+}
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+return retcd;
+}
+/*
+PURPOSE : this function stores the pre-chosen command list in FFS, but only for windows test.
+*/
+#ifdef _SIMULATION_
+LOCAL T_ATI_RSLT store_command_list (void)
+{
+char atw_cmd_list []= "+CGREG;+CLIP;+CLIR;+COLP;+CREG;%ALS;%CGAATT;%CGREG;%CPI;%CREG;";
+TRACE_FUNCTION ("store_command_list()");
+if ( !(strcpy (atw_cmd_list_simu, atw_cmd_list)))
+{
+cmdCmeError(CME_ERR_Unknown);
+return ( ATI_FAIL);
+}
+return (ATI_CMPL);
+}
+#endif /*_SIMULATION_*/
+/*
+This function gets the command Id from input command name string if it is within the default listcmdList
+*/
+LOCAL T_ACI_AT_CMD get_command_id_in_wn_list(CHAR *command_str)
+{
+int i;
+T_ACI_AT_CMD command =  AT_CMD_NONE;
+TRACE_FUNCTION ("get_command_id_in_wn_list()");
+command = get_command_id(command_str);
+for (i = 0;*(atw_cmd_list+i) NEQ AT_CMD_NONE; i ++)
+{
+if (command EQ *(atw_cmd_list+i) )
+{
+return (command);
+}
+}
+TRACE_EVENT_P1("AT&W: unrecognized command in the list: %s", command_str);
+return (AT_CMD_NONE);
+}
+/*
+PURPOSE : this function reads the pre-chosen command list in FFS and then builds a string
+of all the command Ids according to the command list read.
+Parameter:
+cmd_id_read:  To hold the list of command Ids
+*/
+LOCAL T_ATI_RSLT read_command_list_from_ffs (UBYTE *cmd_id_read)
+{
+int i, k;
+#ifndef _SIMULATION_
+int val;
+#endif /*_SIMULATION_*/
+int j = 0;
+CHAR *cmdList_temp;/*to hold the command name strings read from FFS*/
+CHAR string_temp [MAX_ATW_CMD_NAM_LEN] = {'\0'};/* hold 1 command name string*/
+T_ACI_AT_CMD command =  AT_CMD_NONE;
+TRACE_FUNCTION ("read_command_list_from_ffs()");
+ACI_MALLOC (cmdList_temp, (MAX_ATW_CHOSEN_CMD_NB) *( MAX_ATW_CMD_NAM_LEN) + 1) ;
+#ifndef _SIMULATION_
+if ((val = ffs_fread ("/gsm/com/cmdList", cmdList_temp,
+(MAX_ATW_CHOSEN_CMD_NB) *( MAX_ATW_CMD_NAM_LEN) + 1) )< 1)
+{
+TRACE_EVENT_P1("AT&W: Read command list from ffs fail. Returned val is %d", val);
+#else /*!_SIMULATION_*/
+if (!(strcpy (cmdList_temp, atw_cmd_list_simu)))
+{
+TRACE_EVENT("AT&W: Read command list fail. ");
+#endif /*!_SIMULATION_*/
+ACI_MFREE (cmdList_temp);
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+/*The for loop builds the command string and then gets the corresponding command Id*/
+for (i = 0, k = 0; *(cmdList_temp+i) NEQ '\0' AND k < (int)(MAX_ATW_CHOSEN_CMD_NB); i ++)
+{
+if (*(cmdList_temp+i) NEQ ';' )
+{
+/* No ";" is met*/
+*(string_temp+j++) = *(cmdList_temp+i);
+}
+else
+{
+*(string_temp+j) = '\0';
+command = get_command_id_in_wn_list (string_temp);
+if  (command NEQ AT_CMD_NONE)  /* ignore it if unknown string met*/
+{
+*(cmd_id_read+k++) = (UBYTE)command;
+}
+j = 0;
+*string_temp = '\0';
+}
+}
+*(cmd_id_read+k) = (UBYTE)AT_CMD_NONE;
+ACI_MFREE (cmdList_temp);
+return (ATI_CMPL);
+}
+/*
+PURPOSE : this function builds and stores the profile in FFS according to the command list read.
+*/
+LOCAL T_ATI_RSLT store_profile_to_ffs (T_ACI_CMD_SRC srcId, SHORT nProfile)
+{
+int i;
+#ifndef _SIMULATION_
+int val;
+#endif /*_SIMULATION_*/
+int index = 1;
+int command_length = 0;
+/*to hold the content of parameters*/
+#if defined (GPRS) AND defined (DTI)
+T_CGAATT_ATTACH_MODE  para1;
+T_CGAATT_DETACH_MODE  para2;
+#endif  /*GPRS*/
+T_ACI_ALS_MOD   para3 = ALS_MOD_NOTPRESENT;
+T_ACI_CLIR_MOD  mode = CLIR_MOD_NotPresent;
+UBYTE *profile = NULL; /*to hold the content of profile, memory will be allocated later*/
+UBYTE cmdIds [MAX_ATW_CHOSEN_CMD_NB +1] = {'\0'};   /*to hold the list of  command Ids*/
+char ffsAddr[] = "/gsm/com/profilex"; /*address in ffs, the x depends on which profile to save*/
+TRACE_FUNCTION ("store_profile_to_ffs()");
+ffsAddr[ strlen (ffsAddr) - 1] = '0' + nProfile;
+/*before storing of profile read command list from FFS, cmdIds is used to hold the Ids of commands*/
+if ( read_command_list_from_ffs (cmdIds) NEQ ATI_CMPL)
+{
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+/*command list is successfully read and now ready to build profile, allocate memory first*/
+ACI_MALLOC (profile, (MAX_ATW_CHOSEN_CMD_NB) * (MAX_ONE_ATW_PRO_LEN) + 1);
+/*this for_loop builds the profile*/
+for (i = 0; *(cmdIds+i) NEQ AT_CMD_NONE; i ++)
+{
+command_length = 5;
+TRACE_EVENT_P1 ("cmd id is: %d", *(cmdIds+i));
+*(profile+index++) = *(cmdIds+i);          /*stores command ID as the first element for each command*/
+switch (*(cmdIds+i))
+{
+#if defined (GPRS) AND defined (DTI)
+case AT_CMD_CGREG:
+*(profile+index++) = command_length;/*total length in bytes for this command*/
+*(profile+index++) = SIGNED_VALUE;  /*token indicates the following parameter is signed*/
+*(profile+index++) = sizeof (UBYTE);    /*length of the following parameter*/
+*(profile+index++) = (UBYTE)(ati_gprs_user_output_cfg[srcId].plus_cgreg.mod_lac_cid.pres_mode);
+break;
+case AT_CMD_P_CGREG:
+*(profile+index++) = command_length;
+*(profile+index++) = SIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = (UBYTE)(ati_gprs_user_output_cfg[srcId].percent_cgreg.mod_lac_cid.pres_mode);
+break;
+case AT_CMD_CGAATT:
+qAT_PercentCGAATT(srcId, &para1, &para2);
+command_length = 8;
+*(profile+index++) = command_length;
+*(profile+index++) = SIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = (UBYTE)para1;     /*first param*/
+*(profile+index++) = SIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = (UBYTE)para2;   /*second param*/
+break;
+#endif /*GPRS*/
+case AT_CMD_CLIP:
+*(profile+index++) = command_length;
+*(profile+index++) = UNSIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = ati_user_output_cfg[srcId].CLIP_stat;
+break;
+case AT_CMD_CPI:
+*(profile+index++) = command_length;
+*(profile+index++) = UNSIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = ati_user_output_cfg[srcId].CPI_stat;
+break;
+case AT_CMD_COLP:
+*(profile+index++) = command_length;
+*(profile+index++) = UNSIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = at.flags.COLP_stat;
+break;
+case AT_CMD_CLIR:
+qAT_PercentCLIR  (srcId, &mode);
+*(profile+index++) = command_length;
+*(profile+index++) = SIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = mode;
+break;
+case AT_CMD_ALS:
+qAT_PercentALS (srcId, &para3);
+*(profile+index++) = command_length;
+*(profile+index++) = SIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = (UBYTE)para3;
+break;
+case AT_CMD_CREG:
+*(profile+index++) = command_length;
+*(profile+index++) = SIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = (UBYTE)ati_user_output_cfg[srcId].creg.mod_lac_cid.pres_mode;
+break;
+case AT_CMD_P_CREG:
+*(profile+index++) = command_length;
+*(profile+index++) = SIGNED_VALUE;
+*(profile+index++) = sizeof (UBYTE);
+*(profile+index++) = (UBYTE)(ati_user_output_cfg[srcId].percent_creg.mod_lac_cid.pres_mode);
+break;
+default:
+TRACE_EVENT("Unknown AT command");
+ACI_MFREE (profile);
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+}
+/*store the total length of the string in the first element, the max length of the profile should
+not exceed 255, otherwise the stored structure in FFS should be redefined. Param <index>
+is actually the length of the profile.
+*/
+if (index > 255)
+{
+ACI_MFREE (profile);
+TRACE_EVENT("Profile size exceed 255.");
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+profile [0] = (UBYTE)index;
+#ifndef _SIMULATION_
+if((val = ffs_fwrite(ffsAddr, profile, index ) )NEQ EFFS_OK)
+{
+TRACE_EVENT_P1("Write to FFS fail. Returned value is %d", val);
+ACI_MFREE (profile);
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+#endif  /*!_SIMULATION_*/
+#ifdef _SIMULATION_
+for (i = 0;  i < index; i++)
+{
+atw_profile_simu[nProfile][i] = profile [i];
+TRACE_EVENT_P2 ("index is %d, store profile is: %d", i, atw_profile_simu[nProfile][i]);
+}
+#endif  /*_SIMULATION_*/
+ACI_MFREE (profile);
+return (ATI_CMPL);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT :                             MODULE  :                    |
+| STATE   : code                        ROUTINE : ati_wn_store_params|
++--------------------------------------------------------------------+
+PURPOSE : This function is the implementation of of AT command AT&W
+which stores the profile of some prechosen commands to FFS.
+*/
+LOCAL T_ATI_RSLT ati_wn_store_params      ( UBYTE  srcId,   SHORT  nProfile)
+{
+TRACE_FUNCTION ("ati_wn_store_params()");
+/*Stores pre-chosen AT commands. For windows test purpose only.*/
+#ifdef _SIMULATION_
+if (store_command_list () NEQ ATI_CMPL)
+{
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL) ;
+}
+#endif /*_SIMULATION_*/
+/*Stores profile for chosen AT commands to FFS*/
+if (store_profile_to_ffs ((T_ACI_CMD_SRC)srcId, nProfile) NEQ ATI_CMPL)
+{
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL) ;
+}
+return (ATI_CMPL);
+}
+/*
+PURPOSE : this function reads the profile stored in FFS.
+*/
+LOCAL T_ATI_RSLT read_profile_from_ffs (SHORT nProfile, UBYTE *profile_read, SHORT len_profile_read)
+{
+#ifndef _SIMULATION_
+int val;
+#endif
+int i;
+/*the last letter x depends on the profile to read*/
+char ffsAddr[] = "/gsm/com/profilex";
+TRACE_FUNCTION ("read_profile_from_ffs()");
+/*build the correct address in FFS according to nProfile*/
+ffsAddr[ strlen (ffsAddr) - 1] = '0' + nProfile;
+TRACE_EVENT_P1 ("Read address is: %s", ffsAddr);
+#ifndef _SIMULATION_
+if ((val = ffs_fread (ffsAddr, profile_read, len_profile_read ))< 1)
+{
+TRACE_EVENT_P1("Read profile from FFS fail, returned val is %d", val);
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+#endif /*_SIMULATION_*/
+#ifdef _SIMULATION_
+for (i = 0; i < atw_profile_simu[nProfile][0] ; i ++)
+{
+profile_read [i] = atw_profile_simu [nProfile][i];
+TRACE_EVENT_P2 ("index %d, profile_read is: %d ", i, profile_read [i]);
+}
+#endif /*_SIMULATION_*/
+return (ATI_CMPL);
+}
+/*
++------------------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : ATI_BAS                            |
+| STATE   : code                  ROUTINE : set_param_to_the_retrieved_value   |
++------------------------------------------------------------------------------+
+PURPOSE : this function handles command parameters.
+*/
+LOCAL T_ATI_RSLT set_param_to_the_retrieved_value(UBYTE srcId, UBYTE *string)
+{
+int para = * (string+4); /*this is for functions with input param of type int*/
+CHAR para1 = * (string+4); /*this is for functions with input param of type char*/
+T_ATI_RSLT atiRet = ATI_FAIL;
+T_ACI_RETURN aciRet = AT_FAIL;
+TRACE_FUNCTION ("set_param_to_the_retrieved_value()");
+/* string[2] is always the token and string[3] always the length.
+so far we only have parameters with 1 byte length.*/
+if ( *(string+2) EQ SIGNED_VALUE AND *(string+3) EQ sizeof (UBYTE))
+{
+para = ((* (string+4) > 127) ? *(string+4) -256: *(string+4));
+}
+para1 = (CHAR)(para + '0'); /*Transform to the corresponding inern value of the corresponding character*/
+switch (*string)
+{
+case AT_CMD_CGREG:
+#if defined (GPRS) AND defined (DTI)
+atiRet = setatPlusCGREG ( &para1, srcId);
+#else
+atiRet = ATI_CMPL;
+#endif   /*GPRS*/
+break;
+case AT_CMD_P_CGREG:
+#if defined (GPRS) AND defined (DTI)
+atiRet = setatPercentCGREG (&para1, srcId);
+#else
+atiRet = ATI_CMPL;
+#endif /*GPRS*/
+break;
+case AT_CMD_CGAATT:
+#if defined (GPRS) AND defined (DTI)
+aciRet = sAT_PercentCGAATT (srcId, para, (*(string+7) > 127) ? (*(string+7) - 256 ): *(string+7));
+#else
+aciRet =  AT_CMPL;
+#endif /*GPRS*/
+break;
+case AT_CMD_CLIP:
+atiRet = setatPlusCLIP ( &para1, srcId );
+break;
+case AT_CMD_CPI:
+ati_user_output_cfg[srcId].CPI_stat = string[4];
+atiRet = ATI_CMPL;
+break;
+case AT_CMD_COLP:
+atiRet = setatPlusCOLP (&para1, srcId);
+break;
+case AT_CMD_CLIR:
+aciRet = sAT_PlusCLIR ( (T_ACI_CMD_SRC)srcId, para);
+break;
+case AT_CMD_ALS:
+aciRet = sAT_PercentALS ((T_ACI_CMD_SRC)srcId, para);
+break;
+case AT_CMD_CREG:
+atiRet = setatPlusCREG ( &para1, srcId);
+break;
+case AT_CMD_P_CREG:
+atiRet = setatPercentCREG ( &para1, srcId);
+break;
+default:
+break;
+}
+if (atiRet EQ ATI_FAIL AND aciRet EQ AT_FAIL )
+{
+TRACE_EVENT_P1("Set function fails for command id %d.", *string);
+cmdCmeError(CME_ERR_Unknown);
+return( ATI_FAIL );
+}
+return (ATI_CMPL);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : ATI_BAS                  |
+| STATE   : code                  ROUTINE : ati_zn_retrieve_params   |
++--------------------------------------------------------------------+
+PURPOSE : This is the implementation of AT command ATZn (n>0),
+which retrieve profile from FFS.
+*/
+GLOBAL void ati_zn_retrieve_params ( UBYTE srcId )
+{
+int index = 1;
+UBYTE *profile_read = NULL;
+UBYTE *string = NULL;
+USHORT len_prof_read = 0;
+TRACE_FUNCTION ("ati_zn_retrieve_params()");
+/*
+*-------------------------------------------------------------------
+* check parameter profile
+*-------------------------------------------------------------------
+*/
+if( ATZprofile < 1                      OR
+ATZprofile > MAX_ATW_STORED_PROFILE    )
+{
+return;
+}
+len_prof_read = (MAX_ATW_CHOSEN_CMD_NB) * (MAX_ONE_ATW_PRO_LEN) + 1;
+TRACE_EVENT_P1 ("length of profile read is %d", len_prof_read);
+ACI_MALLOC (profile_read, len_prof_read);
+if (read_profile_from_ffs ((SHORT)(ATZprofile - 1), profile_read, len_prof_read) NEQ ATI_CMPL)
+{
+TRACE_EVENT ("read_profile_from_ffs() fail...");
+ACI_MFREE (profile_read);
+return;
+}
+/*profile has no content*/
+if (*profile_read EQ 1)
+{
+ACI_MFREE (profile_read);
+return;
+}
+do
+{
+string = profile_read + index; /*index points to the first element of a command profile, which is command id*/
+index += *(profile_read+index +1);/*the second element in the profile is profile length for the command*/
+if (set_param_to_the_retrieved_value (srcId, string) EQ ATI_FAIL)
+{
+ACI_MFREE (profile_read);
+return;
+}
+}while (index < *profile_read);/*the first element of the whole profile is the total length*/
+ACI_MFREE (profile_read);
+return;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndW             |
++--------------------------------------------------------------------+
+PURPOSE : &W command stores profiles to FFS
+*/
+GLOBAL T_ATI_RSLT atAndW (char *cl, UBYTE srcId)
+{
+long nProfile = ACI_NumParmNotPresent;
+char *end;
+TRACE_FUNCTION("atAndW()");
+nProfile = strtol(cl, &end, 10);
+if(*end)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+/*
+*  Normally omitted value should be assumed as zero
+*  but AT&W does not support profile number zero.
+*  So an omitted profile will be assumed as 1.
+*/
+if(cl EQ end)
+{
+nProfile = 1;
+}
+if( nProfile < 1 OR nProfile > MAX_ATW_STORED_PROFILE )
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+switch (ati_wn_store_params( srcId, (SHORT) (nProfile - 1)))
+{
+case ATI_CMPL:
+return ATI_CMPL;
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atZ                |
++--------------------------------------------------------------------+
+PURPOSE : Z command (reset DCE and terminate any call in progress)
+*/
+GLOBAL T_ATI_RSLT atZ(char *cl, UBYTE srcId)
+{
+char  *end                   = NULL;
+UBYTE value                  = (UBYTE)strtol(cl, &end, 10);
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+TRACE_FUNCTION("atZ()");
+if(*end)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+if( value > MAX_ATW_STORED_PROFILE )
+{
+cmdAtError(atError);
+return( ATI_FAIL );
+}
+ATZprofile = value;
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send     cmd;
+T_BAT_no_parameter dummy;
+cmd.ctrl_params     = BAT_CMD_AT_Z;
+dummy.bat_dummy     = 0xFF;
+cmd.params.ptr_at_z = &dummy;
+if( at.rngPrms.isRng EQ TRUE )
+{
+ati_stop_ring();
+}
+src_params->curAtCmd = AT_CMD_Z;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return (ATI_EXCT); /* executing, because response is passed by callback function */
+}
+#else /* no FF_ATI_BAT */
+switch(sAT_Z( srcId, 0 ))
+{
+case AT_CMPL:
+return ATI_CMPL;
+case AT_EXCT:
+if( at.rngPrms.isRng EQ TRUE )
+{
+ati_stop_ring();
+}
+src_params->curAtCmd    = AT_CMD_Z;
+return ATI_EXCT;
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+#endif /* no FF_ATI_BAT */
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCPAS         |
++--------------------------------------------------------------------+
+PURPOSE : Phone activity status
+*/
+GLOBAL T_ATI_RSLT setatPlusCPAS(char *cl, UBYTE srcId)
+{
+T_ACI_CPAS_PAS pas = CPAS_PAS_NotPresent;
+T_ACI_RETURN ret = AT_FAIL;
+TRACE_FUNCTION("setatPlusCPAS()");
+if (*cl NEQ '\0' AND *cl NEQ ';')
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_no_parameter my_bat_set_plus_cpas;
+TRACE_FUNCTION("setatPlusCPAS() calls bat_send() <=== as APPLICATION");
+ret = qAT_PlusCPAS( srcId, &pas );
+if (ret EQ AT_CMPL)
+{
+resp_disp(srcId, cl, "e", &pas);
+}
+else
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+cmd.params.ptr_set_plus_cpas = &my_bat_set_plus_cpas;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return ATI_EXCT; /* executing, because response is passed by callback function */
+}
+#else /* OLD FUNCTION BODY */
+ret = qAT_PlusCPAS( srcId, &pas );
+if (ret EQ AT_CMPL)
+{
+resp_disp(srcId, cl, "e", &pas);
+return ATI_CMPL;
+}
+else
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+#endif /* no FF_ATI_BAT*/
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCLAE         |
++--------------------------------------------------------------------+
+PURPOSE : +CLAE command (Language Event)
+*/
+GLOBAL T_ATI_RSLT setatPlusCLAE (char *cl, UBYTE srcId)
+{
+T_ACI_RETURN ret = AT_FAIL;
+T_ACI_CLAE_MOD mode = CLAE_MOD_NotPresent;
+TRACE_FUNCTION("setatPLusCLAE()");
+switch(*cl)
+{
+case('0'):
+mode=CLAE_MOD_Disable;
+break;
+case('1'):
+mode=CLAE_MOD_Enable;
+break;
+default:
+cmdCmeError(CME_ERR_OpNotAllow);
+return ATI_FAIL;
+}
+ret = sAT_PlusCLAE(srcId,mode);
+if (ret EQ AT_CMPL)
+return ATI_CMPL;
+else
+return ATI_FAIL;
+}
+GLOBAL T_ATI_RSLT queatPlusCLAE (char *cl, UBYTE srcId)
+{
+char *me="+CLAE: ";
+T_ACI_RETURN ret = AT_FAIL;
+T_ACI_CLAE_MOD mode=CLAE_MOD_NotPresent;
+TRACE_FUNCTION("queatPLusCLAE()");
+ret = qAT_PlusCLAE(srcId,&mode);
+if(ret EQ AT_CMPL)
+{
+sprintf(g_sa,"%s%d",me,mode);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+else
+{
+cmdCmeError(CME_ERR_Unknown);
+return ATI_FAIL;
+}
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndC             |
++--------------------------------------------------------------------+
+PURPOSE : &C command reset to factory default (not the final version)
+*/
+GLOBAL T_ATI_RSLT atAndC (char *cl, UBYTE srcId)
+{
+T_ACI_DCD_MOD val;
+TRACE_FUNCTION("atAndC()");
+switch(*cl)
+{
+case '\0':
+case  '0':
+val = DCD_ALWAYS_ON;
+break;
+case  '1':
+val = DCD_DISABLE_AFTER_CALL;
+break;
+#ifdef RMV_01_06_04
+case ('?'):
+qAT_AndC( srcId, &val );
+sprintf(g_sa, "&C: %d", val);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return (ATI_CMPL);
+#endif
+default:
+cmdAtError(atError);
+return(ATI_FAIL);
+}
+#ifdef DTI
+if (sAT_AndC( srcId, val ) EQ AT_CMPL)
+{
+return (ATI_CMPL);
+}
+#endif
+cmdAtError(atError);
+return (ATI_FAIL);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndD             |
++--------------------------------------------------------------------+
+PURPOSE : &D command to set the DTR behaviour
+*/
+GLOBAL T_ATI_RSLT atAndD (char *cl, UBYTE srcId)
+{
+UBYTE val;
+TRACE_FUNCTION("atAndD()");
+switch(*cl)
+{
+case ('\0'):
+case ('0'):
+val = 0;
+break;
+case ('1'):
+val = 1;
+break;
+case ('2'):
+val = 2;
+break;
+#ifdef RMV_01_06_04
+case ('?'):
+query = TRUE;
+break;
+#endif
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+#ifdef RMV_01_06_04
+if (query)
+{
+ret=qAT_AndD (srcId, &val);
+if(ret EQ AT_CMPL)
+{
+sprintf(g_sa,"&D: %d", val);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+}
+else
+#endif
+{
+#ifdef DTI
+if (sAT_AndD ( srcId, val ) EQ AT_CMPL)
+{
+return ATI_CMPL;
+}
+#endif
+}
+cmdAtError(atError);
+return ATI_FAIL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndF             |
++--------------------------------------------------------------------+
+PURPOSE : &F command reset to factory default (not the final version)
+*/
+GLOBAL T_ATI_RSLT atAndF (char *cl, UBYTE srcId)
+{
+T_ACI_RETURN ret = AT_FAIL;
+TRACE_FUNCTION("atAndF()");
+switch(*cl)
+{
+case '\0':
+case ('0'):
+/* default like ATZ */
+ati_cmd_reset(srcId);
+break;
+case ('1'):
+ati_cmd_reset(srcId);
+/*
+*  An other manufacturer specific parameter set.
+*
+*  This is different from the user specific profiles (ATZ1).
+*
+*/
+at.flags.COLP_stat = 1;
+ati_user_output_cfg[srcId].CR_stat = 1;
+ati_user_output_cfg[srcId].CRC_stat = 1;
+ati_user_output_cfg[srcId].CLIP_stat = 1;
+ati_user_output_cfg[srcId].DR_stat = 1;
+ati_user_output_cfg[srcId].creg.mod_lac_cid.pres_mode = CREG_MOD_ON;
+#ifdef GPRS
+ati_gprs_user_output_cfg[srcId].plus_cgreg.mod_lac_cid.pres_mode = CREG_MOD_ON;
+ati_gprs_user_output_cfg[srcId].percent_cgreg.mod_lac_cid.pres_mode = CREG_MOD_ON;
+#endif
+break;
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+/*
+*  The function sAT_AndF will be called with value 0 -> AT&F0
+*  because the different behavior of value 0 to 1 is only ATI
+*  related and sAT_AndF() is only CMH-related.
+*
+*  This is different from sAT_Z().
+*/
+ret = sAT_AndF( srcId, 0 );
+if (ret EQ AT_CMPL)
+{
+return ATI_CMPL;
+}
+cmdAtError(atError);
+return ATI_FAIL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndK             |
++--------------------------------------------------------------------+
+PURPOSE : &K only for compatibility
+*/
+GLOBAL T_ATI_RSLT atAndK (char *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("atAndK()");
+switch(*cl)
+{
+case ('0'):
+case ('1'):
+case ('2'):
+case ('3'):
+case ('4'):
+return ATI_CMPL;
+default:
+cmdAtError(atError);
+return ATI_FAIL;
+}
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCSQ          |
++--------------------------------------------------------------------+
+PURPOSE : +CSQ, signal quality
+*/
+GLOBAL T_ATI_RSLT setatPlusCSQ ( char *cl, UBYTE srcId)
+{
+rx_Status_Type    rxStat;
+UBYTE             rssi;
+UBYTE             ber;
+TRACE_FUNCTION("setatPlusCSQ()");
+if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK )
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+else
+{
+if ( rxStat.gsmLevel EQ 0xFF OR rxStat.gsmLevel EQ 0 )
+{
+rssi = ACI_RSSI_FAULT;
+}
+else if ( rxStat.gsmLevel > 59 )
+{
+rssi = 31;
+}
+else
+{
+rssi = ( rxStat.gsmLevel / 2 ) + 2;
+}
+if ( rxStat.rxQuality EQ RX_QUAL_UNAVAILABLE )
+{
+ber = ACI_BER_FAULT;
+}
+else
+{
+ber = rxStat.rxQuality;
+}
+sprintf (g_sa, "+CSQ: %d,%d ", rssi, ber );
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+}
+GLOBAL T_ATI_RSLT tesatPlusCSQ(CHAR *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("tesatPLusCSQ()");
+sprintf (g_sa, "+CSQ: 2-31,(%d),(%d)", ACI_RSSI_FAULT, ACI_BER_FAULT );
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCSQ          |
++--------------------------------------------------------------------+
+PURPOSE : %CSQ, signal quality
+Shen,Chao Juni.12th.2003
+*/
+GLOBAL T_ATI_RSLT setatPercentCSQ ( char *cl, UBYTE srcId)
+{
+T_ACI_CSQ_MODE CSQmode = CSQ_Disable;
+rx_Status_Type  rxStat;
+TRACE_FUNCTION("setatPercentCSQ()");
+if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK )
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+else
+{
+switch( *cl )
+{
+case '0':
+{
+CSQmode = CSQ_Disable;
+break;
+}
+case '1':
+{
+CSQmode = CSQ_Enable;
+break;
+}
+default:
+{
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+}
+if (sAT_PercentCSQ(srcId,CSQmode) NEQ AT_CMPL)
+{
+TRACE_EVENT("setatPercentCSQ call sAT_PercentCSQ Error!!");
+}
+sprintf (g_sa, "%s%d ", "%CSQ: ", CSQmode);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+}
+GLOBAL T_ATI_RSLT queatPercentCSQ(CHAR *cl, UBYTE srcId)
+{
+rx_Status_Type    rxStat;
+TRACE_FUNCTION("queatPercentCSQ()");
+qAT_PercentCSQ(srcId,&rxStat.gsmLevel,&rxStat.rxQuality,&rxStat.actLevel);
+sprintf (g_sa, "%s %d, %d, %d", "%CSQ: ",rxStat.gsmLevel, rxStat.rxQuality, rxStat.actLevel);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+GLOBAL T_ATI_RSLT tesatPercentCSQ(CHAR *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("tesatPercentCSQ()");
+sprintf (g_sa, "%s (%d), (%d), 0-4", "%CSQ: ",ACI_RSSI_FAULT, ACI_BER_FAULT);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPercentDBGINFO   |
++--------------------------------------------------------------------+
+PURPOSE : %DBGINFO, query free mem pool blocks.
+*/
+GLOBAL T_ATI_RSLT setatPercentDBGINFO ( char *cl, UBYTE srcId)
+{
+char *me            = "%DBGINFO:";
+ULONG param         = 0;
+T_ACI_DBG_INFO stor = P_DBGINFO_NotPresent;
+CHAR type[4]        = {0};
+USHORT free = 0, alloc = 0, i = 0;
+TRACE_FUNCTION("queatPercentDBGINFO()");
+cl = parse(cl,"sd",(LONG)4, type, &param);
+if(!cl OR *type EQ '\0')
+{
+cmdCmeError(CME_ERR_OpNotAllow);
+return (ATI_FAIL);
+}
+strupper(type);
+for(i=0;dbg_mem_names[i].name NEQ 0;i++)
+{
+if (!strcmp(dbg_mem_names[i].name, type) )
+{
+stor = dbg_mem_names[i].stor;
+break;
+}
+}
+if((dbg_mem_names[i].name EQ 0) OR (param EQ 0))
+{
+cmdCmeError(CME_ERR_OpNotAllow);
+return (ATI_FAIL);
+}
+if (qAT_PercentDBGINFO(srcId, param, (USHORT)stor, &free, &alloc) NEQ ATI_CMPL)
+{
+cmdCmeError(CME_ERR_Unknown);
+return (ATI_FAIL);
+}
+sprintf(g_sa, "%s%d", me, free);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return (ATI_CMPL);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCBC          |
++--------------------------------------------------------------------+
+PURPOSE : +CBC, battery charge
+*/
+#define ACI_BCS_BattPower  0
+#define ACI_BCS_BattCnctd  1
+#define ACI_BCS_NoBatt     2
+#define ACI_BCS_PowerFault 3
+GLOBAL T_ATI_RSLT atPlusCBC ( char *cl, UBYTE srcId )
+{
+pwr_Status_Type powerStat;
+UBYTE           bcs;
+TRACE_FUNCTION("atPlusCBC()");
+if ( pwr_GetStatus ( &powerStat ) NEQ DRV_OK )
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+else
+{
+switch ( powerStat.Status )
+{
+case ( PWR_EXTPOWER_ON ):
+bcs = ACI_BCS_NoBatt;
+break;
+case ( PWR_CHARGER_ON ):
+bcs = ACI_BCS_BattCnctd;
+break;
+default:
+bcs = ACI_BCS_BattPower;
+break;
+}
+sprintf(g_sa, "+CBC: %d,%d", bcs, powerStat.ChargeLevel );
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+	return ATI_CMPL;
+}
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCLVL         |
++--------------------------------------------------------------------+
+PURPOSE : +CLVL, loudspeaker volume level
+*/
+GLOBAL T_ATI_RSLT setatPlusCLVL ( char *cl, UBYTE srcId )
+{
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_plus_clvl my_bat_set_plus_clvl;
+SHORT vol;
+TRACE_FUNCTION("setatPlusCLVL() calls bat_send() <=== as APPLICATION");
+cl = parse ( cl, "d", &vol );
+if( !cl OR vol > 255 OR vol < 0 )
+{
+cmdCmeError ( CME_ERR_OpNotAllow );
+return ATI_FAIL;
+}
+memset(&my_bat_set_plus_clvl, 0, sizeof(my_bat_set_plus_clvl));
+cmd.ctrl_params = BAT_CMD_SET_PLUS_CLVL;
+cmd.params.ptr_set_plus_clvl = &my_bat_set_plus_clvl;
+my_bat_set_plus_clvl.level = (U8)vol;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return ATI_EXCT; /* executing, because response is passed by callback function */
+}
+#else /* OLD FUNCTION BODY */
+TRACE_FUNCTION("setatPlusCLVL()");
+return setaciPrcsVolLevel ( cl, AUDIO_SPEAKER );
+#endif /* no FF_ATI_BAT*/
+}
+GLOBAL T_ATI_RSLT tesatPlusCLVL ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("tesatPlusCLVL()");
+return tesaciPrcsVolLevel ( srcId, cl, AUDIO_SPEAKER );
+}
+GLOBAL T_ATI_RSLT queatPlusCLVL ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("queatPlusCLVL()");
+return queaciPrcsVolLevel ( srcId, cl, AUDIO_SPEAKER );
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCRSL         |
++--------------------------------------------------------------------+
+PURPOSE : +CRSL, ringer sound level
+*/
+GLOBAL T_ATI_RSLT setatPlusCRSL ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusCRSL()");
+return setaciPrcsVolLevel ( cl, AUDIO_BUZZER );
+}
+GLOBAL T_ATI_RSLT tesatPlusCRSL ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("tesatPlusCRSL()");
+return tesaciPrcsVolLevel ( srcId, cl, AUDIO_BUZZER );
+}
+GLOBAL T_ATI_RSLT queatPlusCRSL ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("queatPlusCRSL()");
+return queaciPrcsVolLevel ( srcId, cl, AUDIO_BUZZER );
+}
+/*
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : aciPrcsVolLevel    |
+PURPOSE : +CLVL, +CRSL loudspeaker volume level
+*/
+LOCAL T_ATI_RSLT setaciPrcsVolLevel ( CHAR* cl, UBYTE device )
+{
+SHORT vol;
+cl = parse ( cl, "d", &vol );
+if( !cl OR vol > 255 OR vol < 0 )
+{
+cmdCmeError ( CME_ERR_OpNotAllow );
+return ATI_FAIL;
+}
+else
+{
+if ( audio_SetAmplf( device, ( UBYTE ) vol ) NEQ DRV_OK )
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+}
+return ATI_CMPL;
+}
+LOCAL T_ATI_RSLT tesaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device )
+{
+CHAR *p_sa;
+audio_Status_Type audioStat;
+switch (device)
+{
+case AUDIO_SPEAKER:
+p_sa = "CLVL";
+break;
+case AUDIO_BUZZER:
+p_sa = "CRSL";
+break;
+default:
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+if ( audio_GetStatus ( device, &audioStat ) NEQ DRV_OK )
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+{
+sprintf( g_sa, "+%s: (%d-%d)", p_sa, audioStat.min_volume, audioStat.max_volume );
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+}
+return ATI_CMPL;
+}
+LOCAL T_ATI_RSLT queaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device )
+{
+SHORT  vol;
+UBYTE  drvVol;
+CHAR *p_sa;
+switch (device)
+{
+case AUDIO_SPEAKER:
+p_sa = "CLVL";
+break;
+case AUDIO_BUZZER:
+p_sa = "CRSL";
+break;
+default:
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+if ( audio_GetAmplf ( device, &drvVol ) NEQ DRV_OK )
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+else
+{
+vol = drvVol;
+sprintf ( g_sa, "+%s: %d", p_sa, vol );
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+}
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCMUT         |
++--------------------------------------------------------------------+
+PURPOSE : +CMUT, mute control
+*/
+#define ACI_MUTE_OFF 0
+#define ACI_MUTE_ON  1
+GLOBAL T_ATI_RSLT setatPlusCMUT(CHAR *cl, UBYTE srcId)
+{
+SHORT mute;
+UBYTE drvMute;
+cl = parse ( cl, "d", &mute );
+if( !cl OR ( mute NEQ ACI_MUTE_OFF AND mute NEQ ACI_MUTE_ON ) )
+{
+cmdCmeError ( CME_ERR_OpNotAllow );
+return ATI_FAIL;
+}
+if ( mute EQ ACI_MUTE_OFF )
+{
+drvMute = AUDIO_MUTING_OFF;
+}
+else
+{
+drvMute = AUDIO_MUTING_ON;
+}
+if (audio_SetMute (AUDIO_MICROPHONE, drvMute) NEQ DRV_OK)
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_plus_cmut my_bat_set_plus_cmut;
+TRACE_FUNCTION("setatPlusCMUT() calls bat_send() <=== as APPLICATION");
+memset(&my_bat_set_plus_cmut, 0, sizeof(my_bat_set_plus_cmut));
+cmd.ctrl_params = BAT_CMD_SET_PLUS_CMUT;
+cmd.params.ptr_set_plus_cmut = &my_bat_set_plus_cmut;
+my_bat_set_plus_cmut.n = (T_BAT_plus_cmut_n)drvMute;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return ATI_EXCT; /* executing, because response is passed by callback function */
+}
+#else /* OLD FUNCTION BODY */
+TRACE_FUNCTION("setatPLusCMUT()");
+return ATI_CMPL;
+#endif /* no FF_ATI_BAT */
+}
+GLOBAL T_ATI_RSLT tesatPlusCMUT ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("tesatPlusCMUT()");
+sprintf(g_sa, "+CMUT: (%d,%d)", ACI_MUTE_OFF, ACI_MUTE_ON );
+io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+GLOBAL T_ATI_RSLT queatPlusCMUT(CHAR *cl, UBYTE srcId)
+{
+SHORT mute;
+UBYTE drvMute;
+TRACE_FUNCTION("queatPlusCMUT()");
+if ( audio_GetMute ( AUDIO_MICROPHONE, &drvMute ) NEQ DRV_OK )
+{
+cmdCmeError ( CME_ERR_Unknown );
+return ATI_FAIL;
+}
+else
+{
+if ( drvMute EQ AUDIO_MUTING_OFF )
+{
+mute = ACI_MUTE_OFF;
+}
+else
+{
+mute = ACI_MUTE_ON;
+}
+sprintf ( g_sa, "+CMUT: %d", mute );
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGMI         |
++--------------------------------------------------------------------+
+PURPOSE : +CGMI, show name of manufacturer
+*/
+GLOBAL T_ATI_RSLT atPlusCGMI ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusCGMI()");
+return aciPrcsPlusCG (srcId, cl, EF_CGMI_ID);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGMM         |
++--------------------------------------------------------------------+
+PURPOSE : +CGMM, show name of prodcut
+*/
+GLOBAL T_ATI_RSLT atPlusCGMM ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusCGMM()");
+return aciPrcsPlusCG (srcId, cl, EF_CGMM_ID);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGMR         |
++--------------------------------------------------------------------+
+PURPOSE : +CGMR, show version of product
+*/
+GLOBAL T_ATI_RSLT atPlusCGMR ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusCGMR()");
+return aciPrcsPlusCG (srcId, cl, EF_CGMR_ID);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGSN         |
++--------------------------------------------------------------------+
+PURPOSE : +CGSN, show serial number
+*/
+GLOBAL T_ATI_RSLT atPlusCGSN ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusCGSN()");
+return aciPrcsPlusCG (srcId, cl, EF_CGSN_ID);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusFMI          |
++--------------------------------------------------------------------+
+PURPOSE : +FMI, show name of manufacturer
+*/
+GLOBAL T_ATI_RSLT atPlusFMI ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusFMI()");
+if ( *cl NEQ '?')
+{
+cmdCmeError ( CME_ERR_OpNotAllow );
+return ATI_FAIL;
+}
+return aciPrcsPlusCG (srcId, cl, EF_CGMI_ID);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusFMM          |
++--------------------------------------------------------------------+
+PURPOSE : +FMM, show name of prodcut
+*/
+GLOBAL T_ATI_RSLT atPlusFMM ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusFMM()");
+if ( *cl NEQ '?')
+{
+cmdCmeError ( CME_ERR_OpNotAllow );
+return ATI_FAIL;
+}
+return aciPrcsPlusCG (srcId, cl, EF_CGMM_ID);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusFMR          |
++--------------------------------------------------------------------+
+PURPOSE : +FMR, show version of product
+*/
+GLOBAL T_ATI_RSLT atPlusFMR ( char *cl, UBYTE srcId )
+{
+TRACE_FUNCTION("atPlusFMR()");
+if ( *cl NEQ '?')
+{
+cmdCmeError ( CME_ERR_OpNotAllow );
+return ATI_FAIL;
+}
+return aciPrcsPlusCG (srcId, cl, EF_CGMR_ID);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : aciPrcsPlusCG      |
++--------------------------------------------------------------------+
+Conditioned-out below is TI's original version of the function
+responsible for generating responses to +CGMI, +CGMM, +CGMR and +CGSN
+commands.  As you can see, it is very simple and straightforward.
+But see the comments afterward for why the FreeCalypso firmware has
+to use a not-very-clean hacked version instead.
+*/
+#if 0
+LOCAL T_ATI_RSLT aciPrcsPlusCG (UBYTE srcId, CHAR* cl, CHAR* ef)
+{
+pcm_FileInfo_Type fileInfo;
+USHORT i;
+TRACE_FUNCTION("aciPrcsPlusCG()");
+if (pcm_GetFileInfo ((UBYTE* )ef, &fileInfo) NEQ DRV_OK)
+{
+cmdCmeError (CME_ERR_MemFail);
+return ATI_FAIL;
+}
+if (pcm_ReadFile ((UBYTE*)ef, fileInfo.FileSize,
+(UBYTE*)g_sa, &fileInfo.Version) NEQ DRV_OK)
+{
+cmdCmeError (CME_ERR_MemFail);
+return ATI_FAIL;
+}
+i = 0;
+while ((UBYTE)g_sa[i] NEQ 0xFF)
+{
+i++;
+}
+g_sa[i] = '\0';
+io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT );
+return ATI_CMPL;
+}
+#endif
+/*
+As you can see in the conditioned-out code above, TI's original
+implementation of +CGMI/+CGMM/+CGMR/+CGSN simply spits out whatever
+gets read out of PCM/FFS.  But if one runs that original TI code
+on the Openmoko GSM modem, there are some undesirable effects:
+* The strings stored in FFS in /pcm/CGM[IMR] (written there at the
+factory along with the IMEI and the RF calibration data, I presume)
+are just plain text, e.g., "FIC/OpenMoko" (w/o quotes) in /pcm/CGMI
+and "Neo1973 GTA02" (ditto) in /pcm/CGMM.  The PCM code trustingly
+reads them out of FFS and into the in-RAM PCM table.  But if you
+look at the PCM compiled-in defaults in
+../../../../../chipsetsw/drivers/drv_app/ffs/board/pcmdata.c,
+it appears that at some point they were intended to be enclosed
+in angle brackets.  The experiments I (Space Falcon) did suggest
+that the ATI layer is perfectly happy to emit these PlusCG responses
+either in the angle-bracketed form, or in the form used by Om's
+firmware, e.g., +CGMM: "Neo1973 whatever embedded modem".
+But if PCM contains an unencapsulated string like "Neo1973 GTA02"
+(read from FFS) and that string gets emitted raw, the ATI layer
+gets confused somewhere.
+* TI's ATI layer is not the only code that needs to be kept happy.
+The code that talks AT commands to our modem (fsogsmd or whatever)
+probably expects the +CGMI/+CGMM/+CGMR/+CGSN responses to be
+formatted (encapsulated) in the form in which Om's firmware emits
+them, hence I reason we should do our best to reproduce that format.
+My version below implements +CGMI and +CGMM by reading the string
+value out of PCM (FFS in practice) and encapsulating it in the
+Om-like manner before handing it to the ATI layer for output.
+* For +CGMR I return a compiled-in string identifying this FreeCalypso
+firmware.  I see no point in reading anything out of FFS or PCM
+at all in this case, as the objective of the +CGMR query is to
+identify the firmware version in use, rather than factory FFS
+programming.
+* With TI's vanilla code, the +CGSN query is logically independent of
+the IMEI seen by the GSM stack: it fetches the CGSN record (not the
+IMEI one) from PCM, and that record would have to be populated from
+a /pcm/CGSN file in FFS, if there was one - but Om's GTA0x modems
+have no such file in their FFS from the factory.  If one runs TI's
+vanilla code, one would get this dummy output: <serial number>,
+coming from the compiled-in PCM default table.  Om's firmware
+responds with "+CGSN: 123456789012345" (IMEI digits, no quotes)
+instead.  My implementation below replicates Om's functionality.
+So without further commentary, here is my hacked version of
+the aciPrcsPlusCG() function:
+*/
+LOCAL T_ATI_RSLT aciPrcsPlusCG (UBYTE srcId, CHAR* cl, CHAR* ef_req)
+{
+CHAR* ef_read;
+pcm_FileInfo_Type fileInfo;
+int c, i, j, is_imei;
+char buf[32];
+TRACE_FUNCTION("aciPrcsPlusCG()");
+if (!strcmp(ef_req, EF_CGMR_ID)) {
+sprintf(g_sa, "+%s: \"FreeCalypso leo2moko port\"", ef_req);
+io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT );
+return ATI_CMPL;
+} else if (!strcmp(ef_req, EF_CGSN_ID)) {
+ef_read = EF_IMEI_ID;
+is_imei = 1;
+} else {
+ef_read = ef_req;
+is_imei = 0;
+}
+if (pcm_GetFileInfo ((UBYTE* )ef_read, &fileInfo) NEQ DRV_OK)
+{
+cmdCmeError (CME_ERR_MemFail);
+return ATI_FAIL;
+}
+if (is_imei) {
+for (i = 0, j = 0; i < fileInfo.FileSize; i++) {
+	buf[j++] = (fileInfo.FileLocation[i] & 0x0F) + '0';
+	buf[j++] = (fileInfo.FileLocation[i] >> 4) + '0';
+}
+buf[j-1] = '\0';
+} else {
+buf[0] = '\"';
+for (i = 0, j = 1; i < fileInfo.FileSize; i++) {
+	c = fileInfo.FileLocation[i];
+	if (c == 0 || c == 0xFF)
+		break;
+	buf[j++] = c;
+}
+buf[j++] = '\"';
+buf[j] = '\0';
+}
+sprintf(g_sa, "+%s: %s", ef_req, buf);
+io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT );
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCSCS         |
++--------------------------------------------------------------------+
+PURPOSE : +CSCS command (Select TE character set)
+*/
+GLOBAL T_ATI_RSLT setatPlusCSCS (char *cl, UBYTE srcId)
+{
+CHAR             txtChset[10];
+T_ACI_CSCS_CHSET chset         = CSCS_CHSET_NotPresent;
+TRACE_FUNCTION("setatPlusCSCS()");
+cl = parse ( cl, "s", (LONG) sizeof (txtChset), txtChset);
+if      ( strcmp ( txtChset, "GSM"     ) EQ 0 )
+chset = CSCS_CHSET_Gsm;
+else if ( strcmp ( txtChset, "IRA"     ) EQ 0 )
+chset = CSCS_CHSET_Ira;
+else if ( strcmp ( txtChset, "PCCP437" ) EQ 0 )
+chset = CSCS_CHSET_Pccp_437;
+else if ( strcmp ( txtChset, "PCDN"    ) EQ 0 )
+chset = CSCS_CHSET_Pcdn;
+else if ( strcmp ( txtChset, "8859-1"  ) EQ 0 )
+chset = CSCS_CHSET_8859_1;
+else if ( strcmp ( txtChset, "HEX"     ) EQ 0 )
+chset = CSCS_CHSET_Hex;
+else if ( strcmp ( txtChset, "UCS2"     ) EQ 0 )
+chset = CSCS_CHSET_Ucs2;
+if ( !cl OR chset EQ CSCS_CHSET_NotPresent )
+{
+cmdCmeError ( CME_ERR_OpNotAllow );
+return ATI_FAIL;
+}
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_plus_cscs cscs;
+cmd.ctrl_params=BAT_CMD_SET_PLUS_CSCS;
+cmd.params.ptr_set_plus_cscs=&cscs;
+/*
+*   This relies on T_BAT_plus_cscs being identical to
+*   T_ACI_CSCS_CHSET. It is, apart from the NotPresent
+*   value, which is taken care of earlier in this
+*   function.
+*/
+cscs.cs=(T_BAT_plus_cscs_cs)chset;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return(ATI_EXCT);
+}
+#else
+ati_user_output_cfg[srcId].cscsChset = chset;
+return ATI_CMPL;
+#endif
+}
+GLOBAL T_ATI_RSLT queatPlusCSCS (char *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("queatPlusCSCS()");
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_no_parameter dummy;
+cmd.ctrl_params=BAT_CMD_QUE_PLUS_CSCS;
+dummy.bat_dummy = 0xFF;
+cmd.params.ptr_que_plus_cscs = &dummy;
+bat_send(ati_bat_get_client(srcId), &cmd);
+}
+return(ATI_EXCT);
+#else /* no FF_ATI_BAT */
+strcpy ( g_sa, "+CSCS: ");
+switch ( ati_user_output_cfg[srcId].cscsChset )
+{
+case (CSCS_CHSET_Ira     ): strcat (g_sa,"\"IRA\""    ); break;
+case (CSCS_CHSET_Pcdn    ): strcat (g_sa,"\"PCDN\""   ); break;
+case (CSCS_CHSET_8859_1  ): strcat (g_sa,"\"8859-1\"" ); break;
+case (CSCS_CHSET_Pccp_437): strcat (g_sa,"\"PCCP437\""); break;
+case (CSCS_CHSET_Gsm     ): strcat (g_sa,"\"GSM\""    ); break;
+case (CSCS_CHSET_Hex     ): strcat (g_sa,"\"HEX\""    ); break;
+case (CSCS_CHSET_Ucs2    ): strcat (g_sa,"\"UCS2\""   ); break;
+/*
+*-----------------------------------------------------------
+* This case will be prevented during settings procedure of
+* the TE character set ( CSCS=... )
+*-----------------------------------------------------------
+*/
+default: cmdCmeError ( CME_ERR_Unknown ); return ATI_FAIL;
+}
+io_sendMessage ( srcId, g_sa, ATI_NORMAL_OUTPUT );
+return ATI_CMPL;
+#endif /* no FF_ATI_BAT */
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCMEE         |
++--------------------------------------------------------------------+
+PURPOSE : +CMEE command (Error display mode)
+*/
+GLOBAL T_ATI_RSLT setatPlusCMEE(CHAR *cl, UBYTE srcId)
+{
+SHORT val;
+TRACE_FUNCTION("setatPLusCMEE()");
+cl=parse(cl,"r",&val);
+if ( !cl OR val > CMEE_MOD_Verbose OR val < CMEE_MOD_Disable )
+{
+cmdAtError(atError);
+	return ATI_FAIL;
+}
+else
+{
+TRACE_EVENT_P2("setatPlusCMEE: srcId = %d Value = %d", srcId, val);
+ati_user_output_cfg[srcId].CMEE_stat = (UBYTE)val;
+	return ATI_CMPL;
+}
+}
+/* query function */
+GLOBAL T_ATI_RSLT queatPlusCMEE(CHAR *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("queatPLusCMEE()");
+TRACE_EVENT_P1("queatPlusCMEE: srcId = %d", srcId);
+resp_disp(srcId, cl,"b",&ati_user_output_cfg[srcId].CMEE_stat);
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusGCAP         |
++--------------------------------------------------------------------+
+PURPOSE : +GCAP command (capability information)
+*/
+GLOBAL T_ATI_RSLT atPlusGCAP(char *cl, UBYTE srcId)
+{
+if (*cl EQ '\0')
+{
+#ifdef FAX_AND_DATA
+#ifdef FF_FAX
+#ifdef V42BIS
+sprintf(g_sa,"+GCAP: +CGSM,+FCLASS,+DS");
+#else
+sprintf(g_sa,"+GCAP: +CGSM,+FCLASS");
+#endif
+#else /* no FAX */
+#ifdef V42BIS
+sprintf(g_sa,"+GCAP: +CGSM,+DS");
+#else
+sprintf(g_sa,"+GCAP: +CGSM");
+#endif
+#endif /* FF_FAX */
+#else /* Voice only */
+sprintf(g_sa,"+GCAP: +CGSM");
+#endif /* FAX_AND_DATA */
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+else
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPercentCCBS      |
++--------------------------------------------------------------------+
+PURPOSE : %CCBS command (Call Completion to Busy Subscriber)
+*/
+GLOBAL T_ATI_RSLT setatPercentCCBS(char *cl, UBYTE srcId)
+{
+SHORT mode                   = ACI_NumParmNotPresent;
+SHORT idx                    = ACI_NumParmNotPresent;
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+T_ACI_RETURN ret             = AT_FAIL;
+TRACE_FUNCTION("setatPercentCCBS()");
+cl = parse (cl,"rr",&mode,&idx);
+if(!cl OR (mode NEQ ACI_NumParmNotPresent AND (mode > 1 OR mode < 0)))
+{
+cmdCmeError (CME_ERR_OpNotAllow);
+return ATI_FAIL;
+}
+if( mode NEQ ACI_NumParmNotPresent )
+at.flags.CCBS_stat=(UBYTE)mode;
+#ifdef FF_ATI_BAT
+if (idx != ACI_NumParmNotPresent)
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_percent_ccbs ccbs;
+cmd.ctrl_params=BAT_CMD_SET_PERCENT_CCBS;
+cmd.params.ptr_set_percent_ccbs=&ccbs;
+ccbs.idx=(T_BAT_percent_ccbs_idx)idx;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return(ATI_EXCT);
+}
+else
+{
+return(ATI_CMPL);
+}
+#else /* no FF_ATI_BAT */
+if( idx NEQ ACI_NumParmNotPresent )
+{
+ret = sAT_PercentCCBS(srcId, idx);
+if( ret NEQ AT_EXCT )
+{
+cmdCmeError(CME_ERR_Unknown);
+return ATI_FAIL;
+}
+src_params->curAtCmd    = AT_CMD_CCBS;
+}
+else
+{
+ret = AT_CMPL;
+}
+return (map_aci_2_ati_rslt(ret));
+#endif /* no FF_ATI_BAT */
+}
+GLOBAL T_ATI_RSLT queatPercentCCBS(char *cl, UBYTE srcId)
+{
+T_ACI_RETURN ret             = AT_FAIL;
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+TRACE_FUNCTION("queatPercentCCBS()");
+ret = qAT_PercentCCBS(srcId);
+if( ret NEQ AT_EXCT )
+{
+cmdCmeError(CME_ERR_Unknown);
+return ATI_FAIL;
+}
+src_params->curAtCmd    = AT_CMD_CCBS;
+return (map_aci_2_ati_rslt(ret));
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCMUX         |
++--------------------------------------------------------------------+
+PURPOSE : +CMUX command (multiplexer)
+*/
+GLOBAL T_ATI_RSLT setatPlusCMUX (char *cl, UBYTE srcId)
+{
+T_ACI_RETURN ret  = AT_FAIL;
+SHORT mode        = ACI_NumParmNotPresent;
+SHORT subset      = 0;      /* default value */
+UBYTE  port_speed = NOT_PRESENT_8BIT;
+int   N1          = 64;
+/* default value in advanced mode (other modes not supported */
+SHORT T1          = 10;         /* (100 ms) */
+SHORT N2          = 3;
+SHORT T2          = 30;         /* (30 ms) */
+SHORT T3          = 10;         /* (10 s) */
+SHORT k           = 2;
+TRACE_FUNCTION("setatPlusCMUX()");
+cl = parse (cl,"rrrdrrrrr",&mode,&subset,&port_speed,&N1,&T1,&N2,&T2,&T3,&k);
+if (!cl)
+{
+cmdCmeError(CME_ERR_OpNotAllow);
+return ATI_FAIL;
+}
+#ifdef DTI
+/* values not supported */
+if ( mode NEQ 1
+OR subset NEQ 0
+OR ((port_speed NEQ NOT_PRESENT_8BIT)
+AND (convert_mux_port_speed(port_speed) EQ BD_RATE_NotPresent))
+OR N1 < 1 OR N1 > 32768
+OR T1 < 1 OR T1 > 255
+OR N2 < 0 OR N2 > 100
+OR T2 < 2 OR T2 > 255
+OR T3 < 1 OR T3 > 255
+OR k < 1 OR k > 7 )
+{
+TRACE_EVENT("at least one value is beyond capabilities");
+cmdCmeError(CME_ERR_OpNotAllow);
+return ATI_FAIL;
+}
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_plus_cmux cmux;
+cmd.ctrl_params=BAT_CMD_SET_PLUS_CMUX;
+cmd.params.ptr_set_plus_cmux=&cmux;
+cmux.mode=(T_BAT_plus_cmux_mode)mode;
+cmux.subset=(T_BAT_plus_cmux_subset)subset;
+cmux.port_speed=(T_BAT_plus_cmux_port_speed)port_speed;
+cmux.n1=(U16)N1;
+cmux.t1=(U8)T1;
+cmux.n2=(U8)N2;
+cmux.t2=(U8)T2;
+cmux.t3=(U8)T3;
+cmux.k=(S16)k;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return(ATI_EXCT);
+}
+#else /* no FF_ATI_BAT */
+ret = sAT_PlusCMUX(srcId,
+(UBYTE)mode,
+(UBYTE)subset,
+port_speed,
+(USHORT)N1,
+(UBYTE)T1,
+(UBYTE)N2,
+(UBYTE)T2,
+(UBYTE)T3);
+#endif /* no FF_ATI_BAT */
+#endif /* DTI */
+if( ret EQ AT_FAIL )
+{
+cmdCmeError(CME_ERR_Unknown);
+return ATI_FAIL;
+}
+return ATI_CMPL_NO_OUTPUT;
+}
+GLOBAL T_ATI_RSLT tesatPlusCMUX (char *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("tesatPlusCMUX()");
+sprintf(g_sa,"+CMUX: %s","(1),(0),(1-5),(10-100),(1-255),(0-100),(2-255),(1-255),(1-7)");
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+io_sendConfirm(srcId, cmdAtError(atOk), ATI_NORMAL_OUTPUT);
+cmdErrStr = NULL;
+return ATI_CMPL_NO_OUTPUT;
+}
+GLOBAL T_ATI_RSLT queatPlusCMUX (char *cl, UBYTE srcId)
+{
+T_ACI_RETURN ret  = AT_FAIL;
+UBYTE mode;
+UBYTE subset;
+UBYTE port_speed;
+USHORT N1;
+UBYTE T1;
+UBYTE N2;
+UBYTE T2;
+UBYTE T3;
+SHORT k = 2;
+TRACE_FUNCTION("queatPlusCMUX()");
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_no_parameter dummy;
+cmd.ctrl_params = BAT_CMD_QUE_PLUS_CMUX;
+dummy.bat_dummy = 0xFF;
+cmd.params.ptr_que_plus_cmux = &dummy;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return(ATI_EXCT);
+}
+#else /* no FF_ATI_BAT */
+#ifdef DTI
+ret = qAT_PlusCMUX(srcId,
+&mode,
+&subset,
+&port_speed,
+&N1,
+&T1,
+&N2,
+&T2,
+&T3);
+if (ret EQ AT_CMPL)
+{
+sprintf(g_sa,"+CMUX: %d,%d,%d,%d,%d,%d,%d,%d,%d", mode, subset, port_speed, N1, T1, N2, T2, T3, k);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+else if (ret EQ AT_FAIL)
+{
+cmdCmeError(CME_ERR_Unknown);
+}
+#endif /* DTI */
+return ATI_FAIL;
+#endif /* no FF_ATI_BAT */
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusIPR          |
++--------------------------------------------------------------------+
+PURPOSE : +IPR command (DTE speed setting)
+*/
+GLOBAL T_ATI_RSLT setatPlusIPR(char *cl, UBYTE srcId)
+{
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+T_ACI_BD_RATE     speed;
+char *end;
+src_params->curAtCmd = AT_CMD_IPR;
+switch ( strtol(cl, &end, 10) )
+{
+case 0:       speed = BD_RATE_AUTO;   break;
+case 75:      speed = BD_RATE_75;     break;
+case 150:     speed = BD_RATE_150;    break;
+case 300:     speed = BD_RATE_300;    break;
+case 600:     speed = BD_RATE_600;    break;
+case 1200:    speed = BD_RATE_1200;   break;
+case 2400:    speed = BD_RATE_2400;   break;
+case 4800:    speed = BD_RATE_4800;   break;
+case 7200:    speed = BD_RATE_7200;   break;
+case 9600:    speed = BD_RATE_9600;   break;
+case 14400:   speed = BD_RATE_14400;  break;
+case 19200:   speed = BD_RATE_19200;  break;
+case 28800:   speed = BD_RATE_28800;  break;
+case 33900:   speed = BD_RATE_33900;  break;
+case 38400:   speed = BD_RATE_38400;  break;
+case 57600:   speed = BD_RATE_57600;  break;
+case 115200:  speed = BD_RATE_115200; break;
+case 203125:  speed = BD_RATE_203125; break;
+case 406250:  speed = BD_RATE_406250; break;
+case 812500:  speed = BD_RATE_812500; break;
+default:
+cmdCmeError(CME_ERR_OpNotSupp);
+return ATI_FAIL;
+}
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_plus_ipr my_bat_set_plus_ipr;
+TRACE_FUNCTION("setatPlusIPR() calls bat_send() <=== as APPLICATION");
+memset(&my_bat_set_plus_ipr, 0, sizeof(my_bat_set_plus_ipr));
+cmd.ctrl_params = BAT_CMD_SET_PLUS_IPR;
+cmd.params.ptr_set_plus_ipr = &my_bat_set_plus_ipr;
+my_bat_set_plus_ipr.rate = (T_BAT_plus_ipr_rate)speed;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return ATI_EXCT; /* executing, because response is passed by callback function */
+}
+#else /* OLD FUNCTION BODY */
+TRACE_FUNCTION("setatPlusIPR()");
+#ifdef UART
+if(!end)
+{
+cmdCmeError(CME_ERR_OpNotSupp);
+return ATI_FAIL;
+}
+switch ( sAT_PlusIPR(srcId, speed) )
+{
+case (AT_CMPL):                    /* operation completed */
+return ATI_CMPL_NO_OUTPUT;       /* OK was already sent at old baudrate by sAT_PlusIPR,
+so must not be sent twice! */
+default:
+cmdCmeError(CME_ERR_NotPresent);
+return ATI_FAIL;
+}
+#else
+cmdCmeError(CME_ERR_NotPresent);
+return ATI_FAIL;
+#endif /* UART */
+#endif /* no FF_ATI_BAT*/
+}
+GLOBAL T_ATI_RSLT queatPlusIPR(char *cl, UBYTE srcId)
+{
+T_ACI_BD_RATE rate;
+int rate_value;
+TRACE_FUNCTION("queatPlusIPR()");
+#ifdef DTI
+if ( AT_CMPL EQ qAT_PlusIPR(srcId, &rate) )
+{
+switch ( rate )
+{
+case BD_RATE_AUTO:   rate_value = 0;      break;
+case BD_RATE_75:     rate_value = 75;     break;
+case BD_RATE_150:    rate_value = 150;    break;
+case BD_RATE_300:    rate_value = 300;    break;
+case BD_RATE_600:    rate_value = 600;    break;
+case BD_RATE_1200:   rate_value = 1200;   break;
+case BD_RATE_2400:   rate_value = 2400;   break;
+case BD_RATE_4800:   rate_value = 4800;   break;
+case BD_RATE_7200:   rate_value = 7200;   break;
+case BD_RATE_9600:   rate_value = 9600;   break;
+case BD_RATE_14400:  rate_value = 14400;  break;
+case BD_RATE_19200:  rate_value = 19200;  break;
+case BD_RATE_28800:  rate_value = 28800;  break;
+case BD_RATE_33900:  rate_value = 33900;  break;
+case BD_RATE_38400:  rate_value = 38400;  break;
+case BD_RATE_57600:  rate_value = 57600;  break;
+case BD_RATE_115200: rate_value = 115200; break;
+case BD_RATE_203125: rate_value = 203125; break;
+case BD_RATE_406250: rate_value = 406250; break;
+case BD_RATE_812500: rate_value = 812500; break;
+default:             rate_value = 0;      break;
+}
+sprintf(g_sa,"+IPR: %d", rate_value);
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+#endif
+cmdAtError(atError);
+return 0;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusICF          |
++--------------------------------------------------------------------+
+PURPOSE : +ICF command (DTE character frame setting)
+*/
+GLOBAL T_ATI_RSLT setatPlusICF(char *cl, UBYTE srcId)
+{
+T_ACI_BS_FRM      format     = BS_FRM_NotPresent;
+T_ACI_BS_PAR      parity     = BS_PAR_NotPresent;
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+TRACE_FUNCTION("setatPlusICF()");
+cl=parse(cl,"dd",&format,&parity);
+if(!cl)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+#ifdef DTI
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_plus_icf icf;
+cmd.ctrl_params=BAT_CMD_SET_PLUS_ICF;
+cmd.params.ptr_set_plus_icf=&icf;
+/*
+*   This relies on T_ACI_BS_FRM being identical to
+*   T_BAT_framing_format and T_ACI_BS_PAR being identical
+*   to T_BAT_framing_parity.
+*/
+icf.framing_format=(T_BAT_framing_format)format;
+icf.framing_parity=(T_BAT_framing_parity)parity;
+bat_send(ati_bat_get_client(srcId), &cmd);
+}
+src_params->curAtCmd=AT_CMD_ICF;
+return(ATI_EXCT);
+#else /* no FF_ATI_BAT */
+switch ( sAT_PlusICF(srcId, format, parity) )
+{
+case (AT_CMPL):                         /*operation completed*/
+return ATI_CMPL;
+case (AT_EXCT):
+src_params->curAtCmd = AT_CMD_ICF;
+return ATI_EXCT;
+default:
+cmdAtError(atError);                  /*Command failed*/
+return ATI_FAIL;
+}
+#endif /* no FF_ATI_BAT */
+#else
+cmdAtError(atError);                  /*Command failed*/
+return ATI_FAIL;
+#endif
+}
+GLOBAL T_ATI_RSLT queatPlusICF(char *cl, UBYTE srcId)
+{
+#ifndef FF_ATI_BAT
+T_ACI_BS_FRM  format;
+T_ACI_BS_PAR  parity;
+#endif
+TRACE_FUNCTION("queatPlusICF()");
+#ifdef DTI
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_no_parameter dummy;
+cmd.ctrl_params = BAT_CMD_QUE_PLUS_ICF;
+dummy.bat_dummy = 0xFF;
+cmd.params.ptr_que_plus_icf = &dummy;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return(ATI_EXCT);
+}
+#else /* no FF_ATI_BAT */
+switch ( qAT_PlusICF(srcId,&format,&parity) )
+{
+case AT_CMPL:
+if (format EQ BS_FRM_Dat8_Par1_St1 || format EQ BS_FRM_Dat7_Par1_St1 )
+{
+resp_disp(srcId, cl,"ee",&format,&parity);
+}
+else
+{
+resp_disp(srcId, cl,"e",&format);
+}
+return ATI_CMPL;
+}
+#endif /* no FF_ATI_BAT */
+#endif /* DTI */
+cmdAtError(atError);
+return ATI_FAIL;
+}
+GLOBAL T_ATI_RSLT setflowCntr(CHAR* cl, UBYTE srcId)
+{
+T_ACI_RX_FLOW_CTRL DCE_by_DTE = RX_FLOW_NotPresent;  /* by TE: Rx flow control */
+T_ACI_RX_FLOW_CTRL DTE_by_DCE = TX_FLOW_NotPresent;  /* by TA: Tx flow control */
+cl = parse (cl,"dd",&DCE_by_DTE,&DTE_by_DCE);
+if(!cl)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+#ifdef DTI
+switch ( sAT_PlusIFC(srcId, DCE_by_DTE, DTE_by_DCE) )
+{
+case (AT_CMPL):                         /*operation completed*/
+return ATI_CMPL;
+case (AT_EXCT):
+/* ATTENTION: no setting of 'curAtCmd' allowed because the value is set before */
+return ATI_EXCT;
+default:
+cmdAtError(atError);                  /*Command failed*/
+return ATI_FAIL;
+}
+#else
+cmdAtError(atError);                  /*Command failed*/
+return ATI_FAIL;
+#endif
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusIFC          |
++--------------------------------------------------------------------+
+PURPOSE : +IFC command (DTE DCE / DCE DTE flow control)
+*/
+GLOBAL T_ATI_RSLT setatPlusIFC(char *cl, UBYTE srcId)
+{
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+TRACE_FUNCTION("setatPlusIFC()");
+src_params->curAtCmd = AT_CMD_IFC;
+return setflowCntr(cl, srcId);
+}
+GLOBAL T_ATI_RSLT queflowCntr(CHAR* cl, UBYTE srcId)
+{
+T_ACI_RX_FLOW_CTRL DCE_by_DTE;
+T_ACI_RX_FLOW_CTRL DTE_by_DCE;
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+#ifdef DTI
+if ( AT_CMPL EQ qAT_PlusIFC(srcId,&DCE_by_DTE,&DTE_by_DCE) )
+{
+#ifdef FF_FAX
+if (src_params->curAtCmd EQ AT_CMD_FLO)
+{
+sprintf(g_sa,"+FLO: %d",DCE_by_DTE);
+}
+else
+#endif
+if (src_params->curAtCmd EQ AT_CMD_IFC)
+{
+sprintf(g_sa,"+IFC: %d,%d",DCE_by_DTE,DTE_by_DCE);
+}
+io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+else
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+#else
+cmdAtError(atError);
+return ATI_FAIL;
+#endif
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusIFC          |
++--------------------------------------------------------------------+
+PURPOSE : +IFC command (DTE DCE / DCE DTE flow control)
+*/
+GLOBAL T_ATI_RSLT queatPlusIFC(char *cl, UBYTE srcId)
+{
+T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+TRACE_FUNCTION("queatPlusIFC()");
+src_params->curAtCmd = AT_CMD_IFC;
+return queflowCntr(cl, srcId);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusILRR         |
++--------------------------------------------------------------------+
+PURPOSE : +ILRR command (display +ILRR setting)
+*/
+GLOBAL T_ATI_RSLT setatPlusILRR(char *cl, UBYTE srcId)
+{
+SHORT val=-1;
+TRACE_FUNCTION("setatPLusILRR()");
+cl = parse (cl,"r",&val);
+if(!cl OR val > 1 OR val < 0)
+{
+cmdAtError(atError);
+return ATI_FAIL;
+}
+ati_user_output_cfg[srcId].ILRR_stat=(UBYTE)val;
+return ATI_CMPL;
+}
+GLOBAL T_ATI_RSLT queatPlusILRR(char *cl, UBYTE srcId)
+{
+TRACE_FUNCTION("queatPLusILRR()");
+resp_disp(srcId, cl,"b",&ati_user_output_cfg[srcId].ILRR_stat);
+return ATI_CMPL;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT :                              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : setatPlusCCLK      |
++--------------------------------------------------------------------+
+PURPOSE : +CCLK command (Set the real time clock of the MT)
+*/
+GLOBAL T_ATI_RSLT setatPlusCCLK (char *cl, UBYTE srcId)
+{
+T_ACI_RETURN        ret = AT_FAIL;
+T_ACI_RTC_DATE    date_s;
+T_ACI_RTC_TIME    time_s;
+char date_time_string[DATE_TIME_LENGTH+1]={0};
+int days, months, items_conv;
+int hrs, mins, secs;
+int years;
+int timeZone = 0;
+char sign = '+';
+TRACE_FUNCTION("setatPlusCCLK()");
+cl=parse(cl,"s", DATE_TIME_LENGTH, date_time_string);
+if(!cl )
+{
+cmdCmeError(CME_ERR_OpNotAllow);
+return (ATI_FAIL);
+}
+TRACE_EVENT_P1("Date and time are: %s",date_time_string);
+items_conv = sscanf( date_time_string, "%d/%d/%d,%d:%d:%d%c%d",&years,&months,&days,&hrs,&mins,&secs,&sign,&timeZone );
+if (sign == '-')
+{
+timeZone = timeZone * (-1);
+}
+TRACE_EVENT_P1("items_conv %d",items_conv);
+TRACE_EVENT_P1("days %d",days);
+TRACE_EVENT_P1("months %d",months);
+TRACE_EVENT_P1("years %d",years);
+TRACE_EVENT_P1("hours %d",hrs);
+TRACE_EVENT_P1("mins %d",mins);
+TRACE_EVENT_P1("secs %d",secs);
+TRACE_EVENT_P1("sign %c",sign);
+TRACE_EVENT_P1("timeZone %d",timeZone);
+/* If 8 data items not extracted from date_time_string then date_time_string data with TZ info is incorrect. */
+if ( items_conv != 8 )
+{
+cmdCmeError(CME_ERR_OpNotAllow);
+return (ATI_FAIL);
+}
+#ifndef _SIMULATION_
+/* Ensure 'years' passed in from the AT command is not in 4 digit format
+The spec requires the years to be passed in in 2 digit format
+Also ensure the sign char is either a '+' or '-' */
+if ( (years < 0)        || (years > 99 )  ||
+((sign != '-')      && (sign != '+')) ||
+(timeZone < (-48)) || (timeZone > 48)
+)
+{
+cmdCmeError(CME_ERR_OpNotAllow);
+return (ATI_FAIL);
+}
+#else /* _SIMULATION_ */
+/* On the target code these checks are done in the RTC code. In the simulation code-
+the RTC routines are not used so these checks have to be done. */
+if  ( (years  < 0)  || (years  > 99)
+|| (months < 1)  || (months > 12)
+|| (days   < 1)  || (days   > 31)
+|| (hrs    < 0)  || (hrs    > 23)
+|| (mins   < 0)  || (mins   > 59)
+|| (secs   < 0)  || (secs   > 59)
+|| (timeZone < (-48)) || (timeZone > 48)
+)
+{
+cmdCmeError(CME_ERR_OpNotAllow);
+return (ATI_FAIL);
+}
+#endif /* _SIMULATION_ */
+/* Populate date time structs */
+date_s.day = days;
+date_s.month = months;
+date_s.year = years + 2000;    /* Convert years to 4 digit format for passing to lower layer RTC function */
+time_s.hour = hrs;
+time_s.minute = mins;
+time_s.PM_flag = 0;
+time_s.second = secs;
+time_s.format = TIME_FORMAT_24HOUR;
+/* Pass separated date and time and timezone info to set the clock */
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_cmd_set_plus_cclk cclk;
+cmd.ctrl_params=BAT_CMD_SET_PLUS_CCLK;
+cmd.params.ptr_set_plus_cclk=&cclk;
+cclk.year=(U8)date_s.year;
+cclk.month=(U8)date_s.month;
+cclk.day=(U8)date_s.day;
+cclk.hour=(U8)time_s.hour;
+cclk.minutes=(U8)time_s.minute;
+cclk.seconds=(U8)time_s.second;
+cclk.time_zone=(S8)timeZone;
+bat_send(ati_bat_get_client(srcId), &cmd);
+}
+return(ATI_EXCT);
+#else /* no FF_ATI_BAT */
+ret = sAT_PlusCCLK ( srcId,  &date_s,  &time_s, timeZone);
+TRACE_EVENT_P1("sAT_PlusCCLK ret = %d", ret);
+/* Deal with return value */
+switch (ret)
+{
+case (AT_CMPL):                                       /*operation completed*/
+break;
+default:
+cmdCmeError(CME_ERR_Unknown);         /*Command failed*/
+break;
+}
+return (map_aci_2_ati_rslt(ret));
+#endif /* no FF_ATI_BAT */
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT :                              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : queatPlusCCLK      |
++--------------------------------------------------------------------+
+PURPOSE : +CCLK query command (Read the real time clock of the MT)
+*/
+GLOBAL T_ATI_RSLT queatPlusCCLK (char *cl, UBYTE srcId)
+{
+#ifndef FF_ATI_BAT
+T_ACI_RETURN ret = AT_FAIL;
+T_ACI_RTC_DATE date_s;     /* Structures to obtain date time info */
+T_ACI_RTC_TIME time_s;
+char date_time_string[DATE_TIME_LENGTH+1]={0};
+UBYTE days, months;
+UBYTE hrs, mins, secs, count;
+USHORT years;
+char sign ;
+int tz ;
+char *me="+CCLK: ";
+#endif
+TRACE_FUNCTION("queatPlusCCLK()");
+#ifdef FF_ATI_BAT
+{
+T_BAT_cmd_send cmd;
+T_BAT_no_parameter dummy;
+cmd.ctrl_params=BAT_CMD_QUE_PLUS_CCLK;
+dummy.bat_dummy = 0xFF;
+cmd.params.ptr_que_plus_cclk = &dummy;
+bat_send(ati_bat_get_client(srcId), &cmd);
+return(ATI_EXCT);
+}
+#else /* no FF_ATI_BAT */
+ret = qAT_PlusCCLK( srcId, &date_s, &time_s, &tz);
+if (ret EQ AT_CMPL)
+{
+/* Command  completed successfully */
+/* convert  time date struct data into string */
+days =  date_s.day;
+months =  date_s.month;
+years =  date_s.year;
+hrs =  time_s.hour;
+mins =  time_s.minute;
+secs =  time_s.second;
+#ifndef _SIMULATION_
+#ifdef FF_TIMEZONE
+if ( tz < 0)
+{
+sign = '-';
+tz = tz * (-1);
+}
+else
+sign = '+';
+#endif /* FF_TIMEZONE */
+#else /* _SIMULATION_ */
+sign = '-';
+tz = tz * (-1);
+#endif /* _SIMULATION_ */
+/* Convert years to 2 digit format for reporting back to user */
+years = years - 2000;      /* Subtract 2000 years from number returned */
+TRACE_EVENT_P3("Date -> %d - %d - %d",days,months,years);
+TRACE_EVENT_P3("Time -> %d - %d - %d",hrs,mins,secs);
+/* Not using  time_s.format or time_s.PM_flag */
+/* CONVERT DATE TIME INFO INTO STRING FOR OUTPUTTING BACK TO DISPLAY */
+#ifndef _SIMULATION_
+#ifndef FF_TIMEZONE
+count = sprintf(date_time_string, "%s\"%d/%d/%d,%d:%d:%d\"", me, years, months, days, hrs, mins, secs);
+#else /* FF_TIMEZONE */
+TRACE_EVENT_P2("TimeZone -> %c%d", sign, tz);
+count = sprintf(date_time_string, "%s\"%d/%d/%d,%d:%d:%d%c%d\"", me, years, months, days, hrs, mins, secs, sign, tz);
+#endif /* FF_TIMEZONE */
+#else /* _SIMULATION_ */
+TRACE_EVENT_P2("TimeZone -> %c%d", sign, tz);
+count = sprintf(date_time_string, "%s\"%d/%d/%d,%d:%d:%d%c%d\"", me, years, months, days, hrs, mins, secs, sign, tz);
+#endif /* _SIMULATION_ */
+/* REPORT DATE TIME INFO STRING */
+io_sendMessage(srcId, date_time_string, ATI_NORMAL_OUTPUT);
+return ATI_CMPL;
+}
+else
+{
+cmdCmeError(CME_ERR_Unknown);
+return ATI_FAIL;
+}
+#endif /* no FF_ATI_BAT */
+}
+#endif /* ATI_BAS_C */

FreeCalypso > hg > tcs211-pirelli

comparison g23m/condat/ms/src/aci/ati_bas.c @ 0:509db1a7b7b8