diff chipsetsw/drivers/drv_app/sim/sim.h @ 0:509db1a7b7b8

initial import: leo2moko-r1
author Space Falcon <falcon@ivan.Harhan.ORG>
date Mon, 01 Jun 2015 03:24:05 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/chipsetsw/drivers/drv_app/sim/sim.h	Mon Jun 01 03:24:05 2015 +0000
@@ -0,0 +1,459 @@
+/*
+ * SIM.H				 
+ *
+ * Pole Star SIM
+ *
+ * Target : ARM
+ *
+ * Copyright (c) Texas Instruments 1995-1997
+ *
+ */
+
+/*
+ * Device addresses - GCS000 (Gemini / Polestar)
+ *                    HER207 (Hercules)
+ */ 
+
+#ifndef _WINDOWS
+  #include "l1sw.cfg" 
+  #include "chipset.cfg" 
+#endif
+
+#include "nucleus.h" 
+
+/* Flags activation section */
+// #define SIM_RETRY		 /*	by default : NOT ACTIVE */
+//#define SIM_DEBUG_TRACE	 	/*	by default : NOT ACTIVE */
+//#define SIM_UWORD16_MASK 0x00ff  //when using SIM entity not maped to length on 16 bits
+#define SIM_UWORD16_MASK 0xffff  //when using SIM entity maped to length on 16 bits
+//#define SIM_APDU_TEST
+//#define SIM_SAT_REFRESH_TEST
+
+#define SIM_CMD         (MEM_SIM + 0x00)
+#define SIM_STAT        (MEM_SIM + 0x02)
+#define SIM_CONF1       (MEM_SIM + 0x04)
+#define SIM_CONF2       (MEM_SIM + 0x06)
+#define SIM_IT          (MEM_SIM + 0x08)
+#define SIM_DRX         (MEM_SIM + 0x0A)
+#define SIM_DTX         (MEM_SIM + 0x0C)
+#define SIM_MASK        (MEM_SIM + 0x0E)
+
+
+
+/*
+ * Bit definitions 
+ */ 
+// control regidter
+#define SIM_CMD_CRST          0x0001
+#define SIM_CMD_SWRST         0x0002
+#define SIM_CMD_STOP          0x0004
+#define SIM_CMD_START         0x0008
+#define SIM_CMD_CLKEN         0x0010	
+
+// status register
+#define SIM_STAT_CD           0x0001   // card present
+#define SIM_STAT_TXPAR        0x0002   // transmit parity status
+#define SIM_STAT_FFULL        0x0004   // fifo full
+#define SIM_STAT_FEMPTY       0x0008   // fifo empty
+
+// configuration register
+#define SIM_CONF1_CHKPAR      0x0001   // enable receipt check parity
+#define SIM_CONF1_CONV        0x0002   // coding convention
+#define SIM_CONF1_TXRX        0x0004   // SIO line direction
+#define SIM_CONF1_SCLKEN      0x0008   // enable SIM clock
+#define SIM_CONF1_RSVD        0x0010   // reserved
+#define SIM_CONF1_SCLKDIV	  0x0020   // SIM clock frquency
+#define SIM_CONF1_SCLKLEV	  0x0040   // SIM clock idle level
+#define SIM_CONF1_ETU	      0x0080   // ETU period
+#define SIM_CONF1_BYPASS      0x0100   // bypass hardware timers
+#define SIM_CONF1_SVCCLEV     0x0200
+#define SIM_CONF1_SRSTLEV     0x0400
+#define SIM_CONF1_SIOLOW      0x8000   //force SIO to low level	 
+
+// interrupt status register
+#define SIM_IT_NATR           0x0001   // No answer to reset
+#define SIM_IT_WT             0x0002
+#define SIM_IT_ITOV           0x0004   
+#define SIM_IT_ITTX           0x0008   // Transmit
+#define SIM_IT_ITRX           0x0010   // Receipt
+
+#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define SIM_IT_CD             0x0001   // Card insertion/extraction
+#else
+  #define SIM_IT_CD             0x0020   // Card insertion/extraction
+#endif
+
+// interrupt mask register
+#define SIM_MASK_NATR         0x0001   // No answer to reset
+#define SIM_MASK_WT           0x0002
+#define SIM_MASK_OV           0x0004
+#define SIM_MASK_TX           0x0008   // Transmit
+#define SIM_MASK_RX           0x0010   // Receipt
+#define SIM_MASK_CD           0x0020   // Card insertion/extraction	
+
+// receveid byte register
+#define SIM_DRX_STATRXPAR     0x0100   // received byte parity status
+
+// SIM return code OK
+#define SIM_OK                  0
+
+// SIM return error codes
+#define SIM_ERR_NOCARD          1
+#define SIM_ERR_NOINT           2
+#define SIM_ERR_NATR            3
+#define SIM_ERR_READ            4
+#define SIM_ERR_XMIT            5
+#define SIM_ERR_OVF             6
+#define SIM_ERR_LEN             7
+#define SIM_ERR_CARDREJECT      8
+#define SIM_ERR_WAIT            9
+#define SIM_ERR_ABNORMAL_CASE1 10
+#define SIM_ERR_ABNORMAL_CASE2 11
+#define SIM_ERR_BUFF_OVERFL    12
+
+// begin of JYT modifications
+#define SIM_ERR_HARDWARE_FAIL  13
+// end of JYT modifications
+#define SIM_ERR_RETRY_FAILURE  14
+
+#define SIM_SLEEP_NONE         0	// No SIM available 
+#define SIM_SLEEP_DESACT       1	// The Driver is NOT currently in sleep mode (clock is off)
+#define SIM_SLEEP_ACT          2	// The Driver is currently in sleep mode (clock is on)
+#define SIM_SLEEP_NOT_ALLOWED  3	// The Driver cannot stop the clock :
+									// The card don't want or the interface is not able
+									// to do it.
+#define SIM_SLEEP_WAITING_TIME 500 //represent 2.3s of period before entering in sleep mode
+
+#define SIM_CLK_STOP_MASK		0x0D	// Clock Stop mask defined by ETSI 11.11 
+#define SIM_CLK_STOP_NOT_ALLWD	0x00	// see ETSI 11.11 : Clock Stop never allowed
+#define SIM_CLK_STOP_ALLWD		0x01	// see ETSI 11.11 : No prefered level
+#define SIM_CLK_STOP_HIGH		0x04	// see ETSI 11.11 : High level only
+#define SIM_CLK_STOP_LOW		0x08	// see ETSI 11.11 : Low level only
+
+#if(ANLG_FAM == 1)
+  //OMEGA specific definitions
+  #define MODE5V_OMEGA         0x06 // used in SIM_SwitchVolt
+  #define MODE_INIT_OMEGA_3V   0x05 // used in SIM_StartVolt
+  #define MODE_INIT_OMEGA_5V   0x07 // unused !!!!
+  #define MODE3V_OMEGA         0x01 // unused !!!!
+  #define MODE_DIS_SIMLDOEN    0xDF // used in SIM_PowerOff
+  #define MODE_DIS_SIMEN       0xFD // used in SIM_PowerOff
+  #define MODE_ENA_SIMLDOEN    0x20 // used in SIM_ManualStart
+  #define MODE_ENA_SIMEN       0x02 // used in SIM_ManualStart
+#elif(ANLG_FAM == 2)
+   //IOTA specific definitions
+   #define MODE1_8V_IOTA        0x00 
+   #define MODE_INIT_IOTA_3V    0x03
+   #define MODE_INIT_IOTA_1_8V  0x02 
+   #define MODE3V_IOTA          0x01
+   #define MODE_DIS_SIMLDOEN    0xFC // SIMSEL + Regulator RSIMEN
+   #define MODE_DIS_SIMEN       0xF7
+   #define MODE_ENA_SIMLDOEN    0x03 // SIMSEL + Regulator RSIMEN
+   #define MODE_ENA_SIMEN       0x08
+#elif(ANLG_FAM == 3)
+   //SYREN specific definitions
+   #define MODE1_8V_SYREN        0x00 
+   #define MODE_INIT_SYREN_3V    0x03
+   #define MODE_INIT_SYREN_1_8V  0x02 
+   #define MODE3V_SYREN          0x01
+   #define MODE_DIS_SIMLDOEN     0x1FC // SIMSEL + Regulator RSIMEN
+   #define MODE_DIS_SIMEN        0x1F7
+   #define MODE_ENA_SIMLDOEN     0x03 // SIMSEL + Regulator RSIMEN
+   #define MODE_ENA_SIMEN        0x08
+#endif
+
+// define type of interface if not defined
+// 5V only ME         SIM_TYPE = 0
+// 3V technology ME   SIM_TYPE = 1
+// 3V only ME         SIM_TYPE = 2
+// 1.8V technology ME SIM_TYPE = 3 // JYT, 29/01/02, from new specs IOTA
+// 1.8V Only ME       SIM_TYPE = 4 // JYT, 29/01/02, from new specs IOTA
+
+#define SIM_TYPE_5V    0
+#define SIM_TYPE_3_5V  1
+#define SIM_TYPE_3V    2
+#define SIM_TYPE_1_8_3V 3
+#define SIM_TYPE_1_8V   4
+
+//default configuration
+#ifndef SIM_TYPE
+#if((ANLG_FAM == 2) || (ANLG_FAM == 3))
+// Until now (20/03/2003), it is impossible to test IOTA or SYREN with 1.8V Sim Card,
+// so SIM drv is configured in 3V only with IOTA.and SYREN
+// When 1.8V Sim Card will be delivered and tested on IOTA and SYREN, then Sim driver will pass 
+// to : #define SIM_TYPE       SIM_TYPE_1_8_3V   
+#define SIM_TYPE       SIM_TYPE_1_8_3V // MODIFY BY JENNIFER SIM_TYPE_3V   
+#else
+#define SIM_TYPE       SIM_TYPE_3_5V   
+#endif
+#endif
+
+// begin of modifications of JYT
+
+#if((ANLG_FAM == 2) || (ANLG_FAM == 3))
+#define SIM_MASK_INFO_VOLT    0x70  
+#else
+#define SIM_MASK_INFO_VOLT    0x10
+#endif
+
+#define SIM_1_8V              0x30
+#define SIM_3V                0x10  
+#define SIM_5V                0x00
+
+// end of modifications of JYT
+
+// Max size of Answer to Reset (GSM11.11 5.7.1)
+#define MAX_ATR_SIZE          33
+
+// GSM Instruction Class (GSM 11.11 SIM spec)
+#define GSM_CLASS  0xA0
+
+// SIM Instruction Codes
+#define SIM_SELECT              0xA4    
+#define SIM_STATUS              0xF2    
+#define SIM_READ_BINARY         0xB0    
+#define SIM_UPDATE_BINARY       0xD6    
+#define SIM_READ_RECORD         0xB2    
+#define SIM_UPDATE_RECORD       0xDC    
+#define SIM_SEEK                0xA2    
+#define SIM_INCREASE            0x32    
+#define SIM_VERIFY_CHV          0x20    
+#define SIM_CHANGE_CHV          0x24    
+#define SIM_DISABLE_CHV         0x26    
+#define SIM_ENABLE_CHV          0x28    
+#define SIM_UNBLOCK_CHV         0x2C    
+#define SIM_INVALIDATE          0x04    
+#define SIM_REHABILITATE        0x44    
+#define SIM_RUN_GSM_ALGO        0x88    
+#define SIM_GET_RESPONSE        0xC0 
+#define SIM_TERMINAL_PROFILE   	0x10
+#define SIM_FETCH   			0x12
+#define SIM_TERMINAL_RESPONSE   0x14
+#define SIM_ENVELOPE   			0xC2
+
+
+
+// SIM file identifiers
+#define MF                 0x3F00
+#define EF_ICCID           0x2FE2
+#define DF_GSM             0x7F20
+#define DF_DCS1800         0x7F21
+#define EF_LP              0x6F05
+#define EF_IMSI            0x6F07
+#define EF_KC              0x6F20
+#define EF_PLMNSEL         0x6F30
+#define EF_HPLMN           0x6F31
+#define EF_ACMAX           0x6F37
+#define EF_SST             0x6F38
+#define EF_ACM             0x6F39
+#define EF_PUCT            0x6F41
+#define EF_CBMI            0x6F45
+#define EF_BCCH            0x6F74
+#define EF_ACC             0x6F78
+#define EF_FPLMN           0x6F7B
+#define EF_LOCI            0x6F7E
+#define EF_AD              0x6FAD
+#define EF_PHASE           0x6FAE
+#define DF_TELECOM         0x7F10
+#define EF_ADN             0x6F3A
+#define EF_FDN             0x6F3B
+#define EF_SMS             0x6F3C
+#define EF_CCP             0x6F3D
+#define EF_MSISDN          0x6F40
+#define EF_SMSP            0x6F42
+#define EF_SMSS            0x6F43
+#define EF_LND             0x6F44
+#define EF_EXT1            0x6F4A
+#define EF_EXT2            0x6F4B
+#define EF_ECC             0x6FB7
+
+
+#define MASK_INS           0xFE
+#define MASK_CMD           0x11
+#define MASK_RST           0x10  
+
+
+// Buffer sizes
+#define RSIMBUFSIZE  270
+#define RSIZESW1SW2  2 
+#define XSIMBUFSIZE  270
+
+
+
+
+// Structures
+typedef struct
+{
+   volatile unsigned short cmd;
+   volatile unsigned short stat;
+   volatile unsigned short conf1;
+   volatile unsigned short conf2;
+   volatile unsigned short it;
+   volatile unsigned short rx;
+   volatile unsigned short tx;
+   volatile unsigned short maskit;
+#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+   volatile unsigned short it_cd;
+#endif
+} SIM_CONTROLLER;  
+
+
+typedef struct
+{
+    SYS_UWORD8    Inverse;
+    SYS_UWORD8    AtrSize;
+    SYS_UWORD8    AtrData[MAX_ATR_SIZE];
+} SIM_CARD;
+
+
+typedef struct
+{
+    SIM_CONTROLLER      *c;
+    SYS_UWORD8          *xIn;            // xmit input pointer
+    SYS_UWORD8          *xOut;           // xmit output pointer
+    unsigned            errorSIM;          // code return in case of error detectd
+    unsigned short      conf1; // image of the configuration register - avoids read/mod/write cycles	
+    volatile unsigned short txParityErr;
+    unsigned short		rxParityErr;	// if 0 no parity error on receipt, 1 if...
+    SYS_UWORD8          Freq_Algo;              //use to determine which sim clk freq to choose for running GSM algo
+    SYS_UWORD8          PTS_Try;                //use to calculate how many PTS try were already done
+    SYS_UWORD8          FileC;                  //value of File Characteristic
+    SYS_UWORD16         etu9600;
+    SYS_UWORD16         etu400;
+    SYS_UWORD16         startclock;             //744 clock cycle translated in ETU
+    SYS_UWORD16         stopclock;              //1860 clock cycle translated in ETU
+    SYS_UWORD8          moderx;                  //inform that we are in receive mode
+                                        // 0 : mode of normal reception without procedure
+                                        // 1 : mode of wait for acknowledge during reception of char
+                                        // 2 : mode of reception of data by bloc
+                                        // 3 : mode of reception of data char by char (proc char)
+                                        // 4 : mode of reception of data char by char (data)                                       
+                                        // 5 : mode of reception of procedure char SW1/SW2
+                                        // 6 : mode of wait for acknowledge char after transmission of char
+    SYS_UWORD16       expected_data;          //number of expected char in receive mode proc char
+    SYS_UWORD8        ack;                    //acknowledge char
+    SYS_UWORD8        null_received;          //indicates if a NULL char was received
+    SYS_UWORD8        hw_mask;		          //mask used because of pole112 hw prb
+
+    SYS_UWORD8        rbuf[RSIMBUFSIZE];
+    SYS_UWORD8        rx_index;                   // receive index on rbuf buffer
+
+    SYS_UWORD8        xbuf[XSIMBUFSIZE];
+    SYS_UWORD8        rSW12[RSIZESW1SW2];          //buffer to store SW1 and SW2
+    SYS_UWORD8        SWcount;                     //static counter
+    void (*InsertFunc)(SIM_CARD *);
+    void (*RemoveFunc)(void);
+	SYS_UWORD16		  apdu_ans_length;
+}
+SIM_PORT;
+
+
+
+void        SIM_IntHandler(void);
+#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  void SIM_CD_IntHandler(void);
+#endif
+
+
+
+
+
+/*
+ * Prototypes
+ */ 
+// obsolete function
+void SIM_Init(void (Insert(SIM_CARD *cP)), void (Remove(void)));
+
+// initialization 
+void        SIM_Initialize(void);
+SYS_UWORD16 SIM_Register(void (Insert(SIM_CARD *cP)), void (Remove(void)));
+SYS_UWORD16 SIM_Reset(SIM_CARD *cP);
+SYS_UWORD16 SIM_Restart(SIM_CARD *cP);
+
+// file commands
+SYS_UWORD16 SIM_Select(SYS_UWORD16 id, SYS_UWORD8 *dat, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_Status(SYS_UWORD8 *dat, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_ReadBinary(SYS_UWORD8 *dat, SYS_UWORD16 offset, SYS_UWORD16 len, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_UpdateBinary(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 offset, SYS_UWORD16 len, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_ReadRecord(SYS_UWORD8 *dat, SYS_UWORD8 mode, SYS_UWORD8 recNum, SYS_UWORD16 len, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_UpdateRecord(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD8 mode, SYS_UWORD8 recNum, SYS_UWORD16 len, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_Seek(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD8 mode, SYS_UWORD16 len, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_Increase(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 *size);
+
+// Authentication
+SYS_UWORD16 SIM_VerifyCHV(SYS_UWORD8 *result, SYS_UWORD8 *chv, SYS_UWORD8 chvType, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_ChangeCHV(SYS_UWORD8 *result,SYS_UWORD8 *oldChv, SYS_UWORD8 *newChv, SYS_UWORD8 chvType, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_DisableCHV(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_EnableCHV(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_UnblockCHV(SYS_UWORD8 *result, SYS_UWORD8 *unblockChv, SYS_UWORD8 *newChv, SYS_UWORD8 chvType, SYS_UWORD16 *size);
+
+// managing
+SYS_UWORD16 SIM_Invalidate(SYS_UWORD8 *rP, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_Rehabilitate(SYS_UWORD8 *rP, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_RunGSMAlgo(SYS_UWORD8 *result, SYS_UWORD8 *rand, SYS_UWORD16 *size);
+SYS_UWORD16 SIM_GetResponse(SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *size);
+
+// STK 
+SYS_UWORD16 SIM_TerminalProfile(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *rcvSize);
+SYS_UWORD16 SIM_Fetch(SYS_UWORD8 *result, SYS_UWORD16 len, SYS_UWORD16 *rcvSize);
+SYS_UWORD16 SIM_TerminalResponse(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *rcvSize);
+SYS_UWORD16 SIM_Envelope(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *rcvSize);
+
+// power off
+void         SIM_PowerOff(void);
+
+// WIM
+SYS_UWORD16 SIM_XchTPDU(SYS_UWORD8 *dat, SYS_UWORD16 trxLen, SYS_UWORD8 *result,
+						SYS_UWORD16 rcvLen, SYS_UWORD16 *rcvSize);
+
+void SIM_lock_cr17689(void);
+
+
+
+/*
+ * Internal Prototypes
+ */ 
+void        SIM_WriteBuffer(SIM_PORT *p, SYS_UWORD16 offset, SYS_UWORD16 n);
+SYS_UWORD16 SIM_Result(SIM_PORT *p, SYS_UWORD8 *rP, SYS_UWORD16 *lenP, SYS_UWORD8 offset);
+SYS_UWORD16 SIM_Command(SIM_PORT *p, SYS_UWORD16 n, SYS_UWORD8 *rP, SYS_UWORD16 *lP);
+SYS_UWORD16 SIM_Command_Base(SIM_PORT *p, SYS_UWORD16 n, SYS_UWORD8 *dP, SYS_UWORD16 *lP);
+SYS_UWORD16 SIM_Dummy(void);
+void        SIM_InitLog(void);
+
+SYS_UWORD16 SIM_TxParityErrors();
+SYS_UWORD16  SIM_WaitReception(SIM_PORT *p);
+void         SIM_Interpret_FileCharacteristics(SIM_PORT *p);
+SYS_UWORD16  SIM_PTSprocedure(SIM_CARD *cP, SIM_PORT *p);
+void         SIM_WARMReset (SIM_PORT *p);
+void	     SIM_SleepMode_In(SYS_UWORD32 param);
+void	     SIM_SleepMode_Out(SIM_PORT *p);
+SYS_UWORD8 	 SIM_GetFileCharacteristics(SIM_PORT *p);
+SYS_UWORD16  SIM_ATRdynamictreatement (SIM_PORT *p, SIM_CARD *cP);
+SYS_UWORD16  SIM_Waitforchars (SIM_PORT *p, SYS_UWORD16 max_wait);
+void         SIM_Calcetu (SIM_PORT *p);
+SYS_UWORD8   SIM_Translate_atr_char (SYS_UWORD8 input, SIM_CARD *cP);
+
+
+SYS_UWORD8   SIM_StartVolt (SYS_UWORD8 ResetFlag);
+SYS_UWORD8   SIM_SwitchVolt (SYS_UWORD8 ResetFlag);
+
+SYS_UWORD16  SIM_ManualStart (SIM_PORT *p);
+SYS_UWORD8   SIM_Memcpy(SYS_UWORD8 *Buff_target, SYS_UWORD8 Buff_source[], SYS_UWORD16 len);
+SYS_BOOL     SIM_SleepStatus(void);
+SYS_UWORD16  SIM_Reset_Restart_Internal(SIM_CARD *cP, SYS_UWORD8 ResetFlag);
+
+/*
+ * Global variables
+ */ 
+#ifdef SIM_C
+#define SI_GLOBAL 
+#else
+#define SI_GLOBAL extern
+#endif
+
+
+SI_GLOBAL SIM_PORT   Sim[1]; 
+SI_GLOBAL NU_TIMER   SIM_timer;  
+SI_GLOBAL STATUS     status_os_sim;
+SI_GLOBAL SYS_UWORD8 SIM_sleep_status;
+