diff chipsetsw/drivers/drv_core/abb/abb.h @ 0:509db1a7b7b8

initial import: leo2moko-r1
author Space Falcon <falcon@ivan.Harhan.ORG>
date Mon, 01 Jun 2015 03:24:05 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/chipsetsw/drivers/drv_core/abb/abb.h	Mon Jun 01 03:24:05 2015 +0000
@@ -0,0 +1,686 @@
+/**********************************************************************************/
+/*            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION              */
+/*                                                                                */
+/*   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only      */
+/*   Unauthorized reproduction and/or distribution is strictly prohibited.  This  */
+/*   product  is  protected  under  copyright  law  and  trade  secret law as an  */
+/*   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All  */
+/*   rights reserved.                                                             */
+/*                                                                                */
+/*                                                                                */
+/*   Filename         : abb.h                                                     */
+/*                                                                                */
+/*   Description      : Analog BaseBand registers and bits definition.	    	  */
+/*                       Functions to drive the ABB device.                       */
+/*                       The Serial Port Interface is used to connect the TI 	  */
+/*						 Analog BaseBand (ABB).				    				  */
+/*						 It is assumed that the ABB is connected as the SPI       */																				  
+/*                       device 0.                                                */																				  
+/*																				  */
+/*   Author           : Pascal PUEL                                               */
+/*                                                                                */
+/*   Version number   : 1.3                                                       */
+/*                                                                                */
+/*   Date and time    : 08/22/03                                                       */
+/*                                                                                */
+/*   Previous delta   : Creation                                                  */
+/*                                                                                */
+/**********************************************************************************/
+
+#ifndef __ABB_H__
+#define __ABB_H__
+
+#include "l1sw.cfg"
+
+#if (OP_L1_STANDALONE == 0)
+  #include "main/sys_types.h"
+#else
+  #include "sys_types.h"
+#endif
+
+
+#ifndef _WINDOWS
+
+
+#include "chipset.cfg"
+
+
+
+
+/*------------------------------------*/
+/* SYREN PG Definition                */
+/*------------------------------------*/
+
+#if (ANLG_FAM == 3)   // SYREN
+    #define S_PG_10      1
+    #define S_PG_20      2
+#endif  // (ANLG_FAM == 3)
+
+
+
+// DEFINITIONS FOR OMEGA/NAUSICA
+#if (ANLG_FAM == 1)
+  // ABB PAGE
+  #define PAGE0	0x0001
+  #define PAGE1	0x0002
+
+  // ABB REGISTERS
+  //=== PAGE 0 =======
+  #define PAGEREG      (1  << 1)
+  #define APCDEL1      (2  << 1)
+  #define BULDATA1_2   (3  << 1)
+  #define TOGBR1       (4  << 1)
+  #define TOGBR2       (5  << 1)
+  #define VBDCTRL      (6  << 1)
+  #define AUXAFC1      (7  << 1)
+  #define AUXAFC2      (8  << 1)
+  #define AUXAPC       (9  << 1)
+  #define APCRAM       (10 << 1)
+  #define APCOFF       (11 << 1)
+  #define AUXDAC       (12 << 1)
+  #define MADCCTRL1    (13 << 1)
+  #define MADCCTRL2    (14 << 1)
+  #define VBATREG      (15 << 1)
+  #define VCHGREG      (16 << 1)
+  #define ICHGREG      (17 << 1)
+  #define VBKPREG      (18 << 1)
+  #define ADIN1REG     (19 << 1)
+  #define ADIN2REG     (20 << 1)
+  #define ADIN3REG     (21 << 1)
+  #define ADIN4XREG    (22 << 1)
+  #define ADIN5YREG    (23 << 1)
+  #define MADCSTAT     (24 << 1)
+  #define CHGREG       (25 << 1)
+  #define ITMASK       (26 << 1)
+  #define ITSTATREG    (27 << 1)
+  #define BCICTL1      (28 << 1)
+  #define BCICTL2      (29 << 1)
+  #define VRPCCTL2     (30 << 1)
+  #define VRPCSTS      (31 << 1)
+  
+  //=== PAGE 1 =======
+  #define PAGEREG      (1  << 1)
+  #define BULIOFF      (2  << 1)
+  #define BULQOFF      (3  << 1)
+  #define BULQDAC      (4  << 1)
+  #define BULIDAC      (5  << 1)
+  #define BBCTRL       (6  << 1)
+  #define VBUCTRL      (7  << 1)
+  #define VBCTRL       (8  << 1)
+  #define PWDNRG       (9  << 1)
+  #define TSC_TIMER    (10 << 1)
+  #define VRPCCTRL3    (11 << 1)
+  #define APCOUT       (12 << 1)
+  #define VRPCBGT      (18 << 1)
+  #define TAPCTRL      (19 << 1)
+  #define TAPREG       (20 << 1)
+  #define AFCCTLADD    (21 << 1)
+  #define AFCOUT       (22 << 1)
+  #define VRPCCTRL1    (23 << 1)
+  #define VRPCCTRL4    (24 << 1)
+  #define APCDEL2      (26 << 1)
+  #define ITSTATREG    (27 << 1)
+
+  // Registers bit definitions
+  // ABB device bits definition of register VBCTRL
+  #define VDLAUX    0x001
+  #define VDLEAR    0x002
+  #define VBUZ      0x004
+  #define VULSWITCH 0x008
+  #define MICBIAS   0x010
+  #define VALOOP    0x020
+  #define VCLKMODE  0x040
+  #define VSYNC     0x080
+  #define VBDFAUXG  0x100
+  #define VFBYP     0x200
+
+  // ABB device bits definition of register VBUCTRL
+  #define DXEN      0x200
+
+  // ABB device bits definition of register VRPCSTS
+  #define ONBSTS    0x01  // ON Button push flag
+  #define ONRSTS    0x02  // Remote ON flag
+  #define ITWSTS    0x04  // Wake-up IT flag
+  #define CHGSTS    0x08  // Charger plug flag
+  #define ONREFLT   0x10  // ON Button current state
+  #define ORMRFLT   0x20  // Remote ON current state
+  #define CHGPRES   0x40  // Charger plug current state
+
+  // ABB device bits definition of register ITSTATREG
+  #define REMOT_IT_STS    0x02
+  #define PUSHOFF_IT_STS  0x04
+  #define CHARGER_IT_STS  0x08
+  #define ADCEND_IT_STS   0x20
+
+  // On Nausica, if the PWR key is pressed, the bit is set, and cleared when released
+  #define PWR_OFF_KEY_PRESSED       (ONREFLT)
+
+  // ABB ADC Interrupts
+  #define EOC_INTENA  0x03DF
+  #define EOC_INTMASK 0x0020
+
+  // ABB ADC CHANNELS
+  #define VBATCV      0x0001
+  #define VCHGCV      0x0002
+  #define ICHGCV      0x0004
+  #define VBKPCV      0x0008
+  #define ADIN1CV     0x0010
+  #define ADIN2CV     0x0020
+  #define ADIN3CV     0x0040
+  #define vADIN4XCV   0x0080
+  #define ADIN5XCV    0x0100
+  #define ALL         0x01FF
+  #define NONE        0x0000
+
+  // ABB MODULES
+  #define MADC        0x8000
+  #define AFC         0x2000
+  #define ADAC        0x0800
+  #define DCDC        0x0080
+  #define ALLOFF      0x0000
+
+  // Definitions of OMEGA test modes for baseband windows
+  #define TSPTEST1       0x001d
+  #define TSPTEST2       0x001e
+  #define AFCTEST        0x0010
+  #define AFCNORM        0x0000
+
+
+// DEFINITIONS FOR IOTA
+#elif (ANLG_FAM == 2)
+  // ABB PAGE
+  #define PAGE0	0x0001
+  #define PAGE1	0x0002
+  #define PAGE2	0x0010
+
+  // ABB REGISTERS
+  //=== PAGE 0 =======
+  #define PAGEREG      (1  << 1)
+  #define APCDEL1      (2  << 1)
+  #define BULDATA1_2   (3  << 1)
+  #define TOGBR1       (4  << 1)
+  #define TOGBR2       (5  << 1)
+  #define VBDCTRL      (6  << 1)
+  #define AUXAFC1      (7  << 1)
+  #define AUXAFC2      (8  << 1)
+  #define AUXAPC       (9  << 1)
+  #define APCRAM       (10 << 1)
+  #define APCOFF       (11 << 1)
+  #define AUXDAC       (12 << 1)
+  #define MADCCTRL     (13 << 1)
+  #define VBATREG      (15 << 1)
+  #define VCHGREG      (16 << 1)
+  #define ICHGREG      (17 << 1)
+  #define VBKPREG      (18 << 1)
+  #define ADIN1REG     (19 << 1)
+  #define ADIN2REG     (20 << 1)
+  #define ADIN3REG     (21 << 1)
+  #define ADIN4REG     (22 << 1)
+  #define MADCSTAT     (24 << 1)
+  #define CHGREG       (25 << 1)
+  #define ITMASK       (26 << 1)
+  #define ITSTATREG    (27 << 1)
+  #define BCICTL1      (28 << 1)
+  #define BCICTL2      (29 << 1)
+  #define VRPCDEV      (30 << 1)
+  #define VRPCSTS      (31 << 1)
+								
+  //=== PAGE 1 =======		
+  #define PAGEREG      (1  << 1)
+  #define BULIOFF      (2  << 1)
+  #define BULQOFF      (3  << 1)
+  #define BULQDAC      (4  << 1)
+  #define BULIDAC      (5  << 1)
+  #define BBCTRL       (6  << 1)
+  #define VBUCTRL      (7  << 1)
+  #define VBCTRL1      (8  << 1)
+  #define PWDNRG       (9  << 1)
+  #define VBPOP        (10 << 1)
+  #define VBCTRL2      (11 << 1)
+  #define APCOUT       (12 << 1)
+  #define BCICONF      (13 << 1)
+  #define BULGCAL      (14 << 1)
+  #define TAPCTRL      (19 << 1)
+  #define TAPREG       (20 << 1)
+  #define AFCCTLADD    (21 << 1)
+  #define AFCOUT       (22 << 1)
+  #define VRPCSIM      (23 << 1)
+  #define AUXLED       (24 << 1)
+  #define APCDEL2      (26 << 1)
+  #define ITSTATREG    (27 << 1)
+  #define VRPCMSKABB   (29 << 1)
+  #define VRPCCFG      (30 << 1)
+  #define VRPCMSK      (31 << 1)
+
+  // Registers bit definitions
+  // ABB device bits definition of register VBCTRL1
+  #define VDLAUX    0x001
+  #define VDLEAR    0x002
+  #define VBUZ      0x004
+  #define VULSWITCH 0x008
+  #define MICBIAS   0x010
+  #define VALOOP    0x020
+  #define VCLKMODE  0x040
+  #define VSYNC     0x080
+  #define VBDFAUXG  0x100
+  #define VFBYP     0x200
+ 
+  // ABB device bits definition of register VBCTRL2
+  #define MICBIASEL 0x001
+  #define VDLHSO    0x002
+  #define MICNAUX   0x004
+
+  // ABB device bits definition of register VBUCTRL
+  #define DXEN      0x200
+
+  // ABB device bits definition of register VBPOP
+  #define HSODIS    0x001
+  #define HSOCHG    0x002
+  #define HSOAUTO   0x004
+  #define EARDIS    0x008
+  #define EARCHG    0x010
+  #define EARAUTO   0x020
+  #define AUXDIS    0x040
+  #define AUXCHG    0x080
+  #define AUXAUTO   0x100
+
+  // ABB device bits definition of register VRPCSTS
+  #define ONBSTS    0x01  // ON Button push flag
+  #define ONRSTS    0x02  // Remote ON flag
+  #define ITWSTS    0x04  // Wake-up IT flag
+  #define CHGSTS    0x08  // Charger plug flag
+  #define ONREFLT   0x10  // ON Button current state
+  #define ORMRFLT   0x20  // Remote ON current state
+  #define CHGPRES   0x40  // Charger plug current state
+
+  // ABB device bits definition of register ITSTATREG
+  #define REMOT_IT_STS    0x02
+  #define PUSHOFF_IT_STS  0x04
+  #define CHARGER_IT_STS  0x08
+  #define ADCEND_IT_STS   0x20
+
+  // On Iota, the bit is set when the key is released and set when the key is pressed
+  #define PWR_OFF_KEY_PRESSED      (0)
+
+  // ABB ADC Interrupts
+  #define EOC_INTENA  0x03DF
+  #define EOC_INTMASK 0x0020
+
+  // ABB ADC CHANNELS
+  #define VBATCV      0x0001
+  #define VCHGCV      0x0002
+  #define ICHGCV      0x0004
+  #define VBKPCV      0x0008
+  #define ADIN1CV     0x0010
+  #define ADIN2CV     0x0020
+  #define ADIN3CV     0x0040
+  #define ADIN4CV     0x0080
+  #define ALL         0x00FF
+  #define NONE        0x0000
+
+  // ABB MODULES
+  #define MADC        0x8000
+  #define AFC         0x2000
+  #define ADAC        0x0800
+  #define DCDC        0x0080
+  #define ALLOFF      0x0000
+
+  // Definitions of IOTA test modes
+  #define TSPTEST1      0x001d
+  #define TSPTEST2      0x001e
+  #define AFCTEST       0x0010
+  #define AFCNORM       0x0000
+
+  // Definition for IOTA test modes
+  #define TSPEN         0x001a
+  #define MADCTEST      0x0012
+  #define TSPADC        0x0015
+  #define TSPUP         0x0017
+  #define TSPDN         0x0018
+
+  // Definition for IOTA Power Management
+
+  //The duration of the SLPDLY counter must be greater than the process execution time:
+  //DBB deep sleep routine included the IT check = DBB sleep routine and IT check
+  //+ the seven 32Khz clock cycle interval needed to ABB in order to make effective the sleep abort write access in VRPCDEV    ++  //  register -> 7*T32Khz = = ABB IBIC propagation delay 
+  //+ 150us of short asynchronous wake-up time  (approximately 4*T32Khz) = ULPD short sleep where Syren/IOTA aborts sleep and 
+  //  write DEVSLEEP = 0  
+
+
+
+
+  #define SLPDLY                0x001F    // delay to set IOTA in sleep mode (unit: 20*T32Khz)
+  #define MASK_SLEEP_MODE       0x0000    // set the regulators in low consumption in sleep mode
+
+
+// DEFINITIONS FOR SYREN
+#elif (ANLG_FAM == 3)
+
+  // ABB PAGE
+  #define PAGE0	0x0001
+  #define PAGE1	0x0002
+  #define PAGE2	0x0010
+
+  // ABB REGISTERS
+  //=== PAGE 0 =======
+  #define PAGEREG     (1  << 1)
+  #define APCDEL1     (2  << 1)
+  #define BULDATA1_2  (3  << 1)
+  #define TOGBR1      (4  << 1)
+  #define TOGBR2      (5  << 1)
+  #define VBDCTRL     (6  << 1)
+  #define AUXAFC1     (7  << 1)
+  #define AUXAFC2     (8  << 1)
+  #define AUXAPC      (9  << 1)
+  #define APCRAM      (10 << 1)
+  #define APCOFF      (11 << 1)
+  #define AUXDAC      (12 << 1)
+  #define MADCCTRL    (13 << 1)
+  #define CHGIREG     (14 << 1)
+  #define VBATREG     (15 << 1)
+  #define VCHGREG     (16 << 1)
+  #define ICHGREG     (17 << 1)
+  #define VBKPREG     (18 << 1)
+  #define ADIN1REG    (19 << 1)
+  #define ADIN2REG    (20 << 1)
+  #define ADIN3REG    (21 << 1)
+  #define ADIN4REG    (22 << 1)
+  #define ADIN5REG    (23 << 1)
+  #define MADCSTAT    (24 << 1)
+  #define CHGVREG     (25 << 1)
+  #define ITMASK      (26 << 1)
+  #define ITSTATREG   (27 << 1)
+  #define BCICTL1     (28 << 1)
+  #define BCICTL2     (29 << 1)
+  #define VRPCDEV     (30 << 1)
+  #define VRPCSTS     (31 << 1)
+
+  //=== PAGE 1 =======
+  #define PAGEREG     (1  << 1)
+  #define BULIOFF     (2  << 1)
+  #define BULQOFF     (3  << 1)
+  #define BULQDAC     (4  << 1)
+  #define BULIDAC     (5  << 1)
+  #define BBCTRL      (6  << 1)
+  #define VBUCTRL     (7  << 1)
+  #define VBCTRL1     (8  << 1)
+  #define PWDNRG      (9  << 1)
+  #define VBPOP       (10 << 1)
+  #define VBCTRL2     (11 << 1)
+  #define APCOUT      (12 << 1)
+  #define BCICONF     (13 << 1)
+  #define BULGCAL     (14 << 1)
+  #define VAUDCTRL    (15 << 1)
+  #define VAUSCTRL    (16 << 1)
+  #define VAUOCTRL    (17 << 1)
+  #define VAUDPLL     (18 << 1)
+  #define TAPCTRL     (19 << 1)
+  #define TAPREG      (20 << 1)
+  #define AFCCTLADD   (21 << 1)
+  #define AFCOUT      (22 << 1)
+  #define VRPCSIMR    (23 << 1)
+  #define BCIWDOG     (24 << 1)
+  #define NONE8       (25 << 1)
+  #define APCDEL2     (26 << 1)
+  #define ITSTATREG   (27 << 1)
+
+#if (ANLG_PG == S_PG_20)                           // SYREN PG2.0 ON EVACONSO
+  #define BBCFG       (28 << 1)
+#else
+  #define NONE9       (28 << 1)
+#endif
+
+  #define VRPCMSKOFF  (29 << 1)
+  #define VRPCCFG     (30 << 1)
+  #define VRPCMSKSLP  (31 << 1)
+  
+  //=== PAGE 2 =======
+
+#if (ANLG_PG == S_PG_10)       // SYREN PG1.0 ON ESAMPLE
+  #define BBCFG       (5 << 1)
+#endif
+
+  #define VRPCABBTST  (25 << 1)
+  #define VRPCAUX     (30 << 1)
+  #define VRPCLDO     (31 << 1)
+
+/* INSERT HERE OTHER DEVICES REGISTERS */
+
+
+  // Registers bit definitions
+  /*** SYREN internal control bits ***/
+
+  /** For reg. VBCTRL1 **/      
+  #define VULSWITCH 0x008
+  #define MICBIAS   0x010
+  #define VALOOP    0x020
+  #define VCLKMODE  0x040
+  #define VSYNC     0x080
+  #define VBDFAUXG  0x100
+  #define VFBYP     0x200
+ 
+  /** For reg. VBCTRL2 **/      
+  #define HSMICSEL  0x001
+  #define MICBIASEL 0x004
+  #define SPKG      0x008
+  #define HSOVMID   0x010
+  #define HSDIF     0x020
+
+  /** For reg. VBUCTRL **/      
+  #define DXEN      0x200
+
+  /** For reg. VBPOP **/      
+  #define HSODIS    0x001
+  #define HSOCHG    0x002
+  #define HSOAUTO   0x004
+  #define EARDIS    0x008
+  #define EARCHG    0x010
+  #define EARAUTO   0x020
+  #define AUXFDIS   0x040
+  #define AUXAUTO   0x080
+  #define AUXFBYP   0x200
+
+  // ABB device bits definition of register VRPCCFG
+  #define PWOND     0x20  // ON Button current state
+  #define CHGPRES   0x40
+
+  // ABB device bits definition of register ITSTATREG
+  #define REMOT_IT_STS    0x02
+  #define PUSHOFF_IT_STS  0x04
+  #define CHARGER_IT_STS  0x08
+  #define ADCEND_IT_STS   0x20
+
+  // ABB device bits definition of register VRPCSTS
+  #define ITWSTS    0x10   // Wake-up IT flag
+  #define PWONBSTS  0x20   // ON Button push flag
+  #define CHGSTS    0x40   // Charger plug flag
+  #define RPSTS     0x100  // Remote ON flag
+
+  // ABB ADC Interrupts
+  #define EOC_INTENA  0x03DF
+  #define EOC_INTMASK 0x0020
+
+  // ABB ADC CHANNELS (reg. MADCCTRL)
+  #define VBATCV    0x0001
+  #define VCHGCV    0x0002
+  #define ICHGCV    0x0004
+  #define VBKPCV    0x0008
+  #define ADIN1CV   0x0010
+  #define ADIN2CV   0x0020
+  #define ADIN3CV   0x0040
+  #define ADIN4CV   0x0080
+  #define ADIN5CV   0x0100
+  #define ALL       0x01FF
+  #define NONE      0x0000
+
+  // ABB MODULES
+  #define MADC        0x8000
+  #define AFC         0x2000
+  #define ADAC        0x0800
+  #define DCDC        0x0080
+  #define ALLOFF      0x0000
+
+  // Definitions of SYREN test modes
+  #define TSPTEST1      0x001d
+  #define TSPTEST2      0x001e
+  #define AFCTEST       0x0010
+  #define AFCNORM       0x0000
+
+  #define TSPEN         0x001a
+  #define MADCTEST      0x0012
+  #define TSPADC        0x0015
+  #define TSPUP         0x0017
+  #define TSPDN         0x0018
+
+  // Definition for SYREN Power Management
+
+  //The duration of the SLPDLY counter must be greater than the process execution time:
+  //DBB deep sleep routine included the IT check = DBB sleep routine and IT check
+  //+ the seven 32Khz clock cycle interval needed to ABB in order to make effective the sleep abort write access in VRPCDEV    ++  //  register -> 7*T32Khz = = ABB IBIC propagation delay 
+  //+ 150us of short asynchronous wake-up time  (approximately 4*T32Khz) = ULPD short sleep where Syren/IOTA aborts sleep and 
+  //  write DEVSLEEP = 0  
+
+  #define SLPDLY             0x001F    // delay to set SYREN in sleep mode (unit: 20*T32Khz)
+  #define MASK_SLEEP_MODE    0x0000    // set the regulators in low consumption in sleep mode
+
+  #define LOCORE_SLEEP   0x01
+  #define NORMAL_SLEEP   0x00
+
+  #define MAIN_BG        0x01,
+  #define SLEEP_BG       0x00
+
+#endif	  // ANLG_FAM == 1,2,3
+
+
+// Define the level of semaphore protection for all accesses to the ABB
+// 0 for no protection
+// 1 for protection low 
+// 2 for protection medium 
+// 3 for protection high 
+#if (OP_L1_STANDALONE == 1)
+#define ABB_SEMAPHORE_PROTECTION     (0)
+#else
+#define ABB_SEMAPHORE_PROTECTION     (1)
+#endif
+
+
+
+// PROTOTYPES
+#if (ABB_SEMAPHORE_PROTECTION)   
+  void ABB_Sem_Create(void);
+#endif
+void ABB_Wait_IBIC_Access(void);
+void ABB_Write_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id, SYS_UWORD16 value);
+SYS_UWORD16 ABB_Read_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id);
+void ABB_free_13M(void);
+void ABB_stop_13M(void);
+SYS_UWORD16 ABB_Read_Status(void);
+void ABB_Conf_ADC(SYS_UWORD16 Channels, SYS_UWORD16 ItVal);                              
+void ABB_Read_ADC(SYS_UWORD16 *Buff);
+void ABB_on(SYS_UWORD16 modules, SYS_UWORD8 bRecoveryFlag);
+SYS_UWORD32 ABB_sleep(SYS_UWORD8 sleep_performed, SYS_WORD16 afc);
+void ABB_wakeup(SYS_UWORD8 sleep_performed, SYS_WORD16 afc);
+void ABB_wa_VRPC(SYS_UWORD16 value);
+void ABB_Write_Uplink_Data(SYS_UWORD16 *TM_ul_data);
+#if (OP_L1_STANDALONE == 0)
+void ABB_Power_Off(void);
+#endif
+#if (ANLG_FAM ==3)
+  void Syren_Sleep_Config(SYS_UWORD16 sleep_type,SYS_UWORD16 bg_select, SYS_UWORD16 sleep_delay);
+#endif
+
+#else    // _WINDOWS
+// DEFINITIONS FOR IOTA
+  // ABB PAGE
+  #define PAGE0	0x0001
+  #define PAGE1	0x0002
+  #define PAGE2	0x0010
+
+  // ABB REGISTERS
+  //=== PAGE 0 =======
+  #define PAGEREG      (1  << 1)
+  #define APCDEL1      (2  << 1)
+  #define BULDATA1_2   (3  << 1)
+  #define TOGBR1       (4  << 1)
+  #define TOGBR2       (5  << 1)
+  #define VBDCTRL      (6  << 1)
+  #define AUXAFC1      (7  << 1)
+  #define AUXAFC2      (8  << 1)
+  #define AUXAPC       (9  << 1)
+  #define APCRAM       (10 << 1)
+  #define APCOFF       (11 << 1)
+  #define AUXDAC       (12 << 1)
+  #define MADCCTRL     (13 << 1)
+  #define VBATREG      (15 << 1)
+  #define VCHGREG      (16 << 1)
+  #define ICHGREG      (17 << 1)
+  #define VBKPREG      (18 << 1)
+  #define ADIN1REG     (19 << 1)
+  #define ADIN2REG     (20 << 1)
+  #define ADIN3REG     (21 << 1)
+  #define ADIN4REG     (22 << 1)
+  #define MADCSTAT     (24 << 1)
+  #define CHGREG       (25 << 1)
+  #define ITMASK       (26 << 1)
+  #define ITSTATREG    (27 << 1)
+  #define BCICTL1      (28 << 1)
+  #define BCICTL2      (29 << 1)
+  #define VRPCDEV      (30 << 1)
+  #define VRPCSTS      (31 << 1)
+								
+  //=== PAGE 1 =======		
+  #define PAGEREG      (1  << 1)
+  #define BULIOFF      (2  << 1)
+  #define BULQOFF      (3  << 1)
+  #define BULQDAC      (4  << 1)
+  #define BULIDAC      (5  << 1)
+  #define BBCTRL       (6  << 1)
+  #define VBUCTRL      (7  << 1)
+  #define VBCTRL1      (8  << 1)
+  #define PWDNRG       (9  << 1)
+  #define VBPOP        (10 << 1)
+  #define VBCTRL2      (11 << 1)
+  #define APCOUT       (12 << 1)
+  #define BCICONF      (13 << 1)
+  #define BULGCAL      (14 << 1)
+  #define TAPCTRL      (19 << 1)
+  #define TAPREG       (20 << 1)
+  #define AFCCTLADD    (21 << 1)
+  #define AFCOUT       (22 << 1)
+  #define VRPCSIM      (23 << 1)
+  #define AUXLED       (24 << 1)
+  #define APCDEL2      (26 << 1)
+  #define ITSTATREG    (27 << 1)
+  #define VRPCMSKABB   (29 << 1)
+  #define VRPCCFG      (30 << 1)
+  #define VRPCMSK      (31 << 1)
+
+  // ABB device bits definition of register VBUCTRL
+  #define DXEN      0x200
+
+  // ABB device bits definition of register VRPCSTS
+  #define ONBSTS    0x01  // ON Button push flag
+  #define ONRSTS    0x02  // Remote ON flag
+  #define ITWSTS    0x04  // Wake-up IT flag
+  #define CHGSTS    0x08  // Charger plug flag
+  #define ONREFLT   0x10  // ON Button current state
+  #define ORMRFLT   0x20  // Remote ON current state
+  #define CHGPRES   0x40  // Charger plug current state
+
+  // ABB device bits definition of register ITSTATREG
+  #define REMOT_IT_STS    0x02
+  #define PUSHOFF_IT_STS  0x04
+  #define CHARGER_IT_STS  0x08
+  #define ADCEND_IT_STS   0x20
+
+
+// PROTOTYPES
+void ABB_Write_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id, SYS_UWORD32 value);
+SYS_UWORD16 ABB_Read_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id);
+SYS_UWORD16 ABB_Read_Status(void);
+void ABB_Conf_ADC(SYS_UWORD16 Channels, SYS_UWORD16 ItVal);                              
+void ABB_Read_ADC(SYS_UWORD16 *Buff);
+
+#endif  // _WINDOWS
+
+#endif // __ABB_H__