diff gpf/INC/dio.h @ 0:509db1a7b7b8

initial import: leo2moko-r1
author Space Falcon <falcon@ivan.Harhan.ORG>
date Mon, 01 Jun 2015 03:24:05 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gpf/INC/dio.h	Mon Jun 01 03:24:05 2015 +0000
@@ -0,0 +1,578 @@
+/*
++-----------------------------------------------------------------------------
+|  Copyright 2004 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose : General definitions of DIO driver interface
++-----------------------------------------------------------------------------
+*/
+
+#ifndef __DIO_H__
+#define __DIO_H__
+
+/*==== INCLUDES =============================================================*/
+
+#include "gdi.h"
+
+/*==== DEFINITIONS ==========================================================*/
+
+/*
+ *  Device Type
+ */ 
+#define DIO_DATA_SER     0x00800000 /* device can transfer serial data       */
+#define DIO_DATA_PKT     0x00400000 /* device can transfer packet data       */
+#define DIO_DATA_MUX     0x00200000 /* device can start a multiplexer        */
+#define DIO_TYPE_ID      0x0000FF00 /* id to separate different capabilities */
+
+#define DIO_TYPE_SER     (DIO_DATA_SER | 0x00000100)                /* serial device */
+#define DIO_TYPE_SER_MUX (DIO_DATA_SER | DIO_DATA_MUX | 0x00000100) /* mux device    */
+#define DIO_TYPE_PKT     (DIO_DATA_PKT | 0x00000100)                /* packet device */
+
+/*
+ *  Device Flags
+ */
+#define DIO_FLAG_SLEEP   0x80000000 /* sleep state allowed                   */
+
+/*
+ * Baud rates 
+ */
+#define DIO_BAUD_921600  0x00800000
+#define DIO_BAUD_812500  0x00400000
+#define DIO_BAUD_460800  0x00200000
+#define DIO_BAUD_406250  0x00100000
+#define DIO_BAUD_230400  0x00080000
+#define DIO_BAUD_203125  0x00040000
+#define DIO_BAUD_115200  0x00020000
+#define DIO_BAUD_57600   0x00010000
+#define DIO_BAUD_38400   0x00008000
+#define DIO_BAUD_33900   0x00004000
+#define DIO_BAUD_28800   0x00002000
+#define DIO_BAUD_19200   0x00001000
+#define DIO_BAUD_14400   0x00000800
+#define DIO_BAUD_9600    0x00000400
+#define DIO_BAUD_7200    0x00000200
+#define DIO_BAUD_4800    0x00000100
+#define DIO_BAUD_2400    0x00000080
+#define DIO_BAUD_1200    0x00000040
+#define DIO_BAUD_600     0x00000020
+#define DIO_BAUD_300     0x00000010
+#define DIO_BAUD_150     0x00000008
+#define DIO_BAUD_110     0x00000004
+#define DIO_BAUD_75      0x00000002
+#define DIO_BAUD_AUTO    0x00000001 /* automatic baud rate detection */
+
+/*
+ * Character framing
+ */
+#define DIO_CF_7N1    0x00000800
+#define DIO_CF_7S1    0x00000400
+#define DIO_CF_7M1    0x00000200
+#define DIO_CF_7E1    0x00000100
+#define DIO_CF_7O1    0x00000080
+#define DIO_CF_7N2    0x00000040
+#define DIO_CF_8N1    0x00000020
+#define DIO_CF_8S1    0x00000010
+#define DIO_CF_8M1    0x00000008
+#define DIO_CF_8E1    0x00000004
+#define DIO_CF_8O1    0x00000002
+#define DIO_CF_8N2    0x00000001
+
+/*
+ * Types of flow control 
+ */
+#define DIO_FLOW_XTR_CTS   0x00000800  /* TX= transp. XON/XOFF   RX=CTS      */
+#define DIO_FLOW_XTR_XOFF  0x00000400  /* TX= transp. XON/XOFF   RX=XON/XOFF */
+#define DIO_FLOW_XTR_NO    0x00000200  /* TX= transp. XON/XOFF   RX=OFF      */
+#define DIO_FLOW_RTS_CTS   0x00000100  /* TX=RTS                 RX=CTS      */
+#define DIO_FLOW_RTS_XOFF  0x00000080  /* TX=RTS                 RX=XON/XOFF */
+#define DIO_FLOW_RTS_NO    0x00000040  /* TX=RTS                 RX=OFF      */
+#define DIO_FLOW_XON_CTS   0x00000020  /* TX=XON/XOFF            RX=CTS      */
+#define DIO_FLOW_XON_XOFF  0x00000010  /* TX=XON/XOFF            RX=XON/XOFF */
+#define DIO_FLOW_XON_NO    0x00000008  /* TX=XON/XOFF            RX=OFF      */
+#define DIO_FLOW_NO_CTS    0x00000004  /* TX=OFF                 RX=CTS      */
+#define DIO_FLOW_NO_XOFF   0x00000002  /* TX=OFF                 RX=XON/XOFF */
+#define DIO_FLOW_NONE      0x00000001  /* TX=OFF                 RX=OFF      */
+
+/*
+ * Serial device flags
+ */
+#define DIO_FLAG_SER_ESC   0x80000000  /* device supports esc seq detection  */
+
+/*
+ *  MUX mode
+ */
+#define DIO_MUX_I      0x00000008  /* advanced option with I frames   */
+#define DIO_MUX_UI     0x00000004  /* advanced option with UI frames  */
+#define DIO_MUX_UIH    0x00000002  /* advanced option with UIH frames */
+#define DIO_MUX_BASIC  0x00000001  /* basic option                    */
+
+/*
+ *  Sleep Mode
+ */
+#define DIO_SLEEP_ENABLE   0x01   /* enter sleep mode if possible */
+#define DIO_SLEEP_DISABLE  0x02   /* do not enter sleep mode      */
+
+/*
+ *  Special Guard Period
+ */
+#define DIO_ESC_OFF 0x0000   /* turn escape sequence detection off */
+
+/*
+ *  Device Mode
+ */
+#define DIO_MODE_MUX  0x00000002  /* acts as 27.010 multiplexer device */
+#define DIO_MODE_SER  0x00000001  /* acts as serial device             */
+
+/*
+ * Control Type
+ */
+#define DIO_CTRL_LINES 0x0001    /* associated structure is T_DIO_CTRL_LINES */
+#define DIO_CTRL_MUX   0x0002    /* associated structure is T_DIO_CTRL_MUX   */
+ 
+/* 
+ * Line State definition & control structure.
+ */
+#define DIO_SA          0x80000000  /* state: read=DTR  write-DSR            */
+#define DIO_SB          0x40000000  /* state: read=RTS  write=DCD            */
+#define DIO_X           0x20000000  /* state: read=RTS  write=CTS            */
+#define DIO_RING        0x10000000  /* state: ring indicator                 */
+#define DIO_ESC         0x08000000  /* state: escape sequence detested.      */
+#define DIO_MUX_STOPPED 0x04000000  /* multiplexer stopped                   */
+#define DIO_BRK         0x02000000  /* state: break received/to be sent      */
+#define DIO_BRKLEN      0x000000FF  /* state: break signal # of characters   */
+
+/*==== TYPES ================================================================*/
+
+/*
+ *  Device Capabilities
+ */ 
+typedef struct 
+{
+  U32         device_type; 
+  U32         device_flags; 
+  U16         mtu_control; 
+  U16         mtu_data; 
+  char const  *driver_name; 
+} T_DIO_CAP;
+
+typedef struct 
+{
+  U32         device_type; 
+  U32         device_flags; 
+  U16         mtu_control; 
+  U16         mtu_data; 
+  char const  *driver_name; 
+  U32         baudrate_auto; 
+  U32         baudrate_fixed; 
+  U32         char_frame; 
+  U32         flow_control; 
+  U32         ser_flags; 
+} T_DIO_CAP_SER;
+
+typedef struct 
+{
+  U32         device_type; 
+  U32         device_flags; 
+  U16         mtu_control; 
+  U16         mtu_data; 
+  char const  *driver_name; 
+  U32         baudrate_auto; 
+  U32         baudrate_fixed; 
+  U32         char_frame; 
+  U32         flow_control; 
+  U32         ser_flags; 
+  U32         mux_mode;
+} T_DIO_CAP_SER_MUX;
+
+typedef struct 
+{
+  U32         device_type; 
+  U32         device_flags; 
+  U16         mtu_control; 
+  U16         mtu_data; 
+  char const  *driver_name; 
+} T_DIO_CAP_PKT;
+
+/*
+ *  Device Control Block
+ */
+typedef struct
+{
+  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
+  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
+  U8                        _align0;                  /*<  5:  1> alignment                                          */
+  U8                        _align1;                  /*<  6:  1> alignment                                          */
+  U8                        _align2;                  /*<  7:  1> alignment                                          */
+} T_DIO_DCB;
+
+typedef struct
+{
+  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
+  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
+  U8                        _align0;                  /*<  5:  1> alignment                                          */
+  U8                        _align1;                  /*<  6:  1> alignment                                          */
+  U8                        _align2;                  /*<  7:  1> alignment                                          */
+  U32                       baudrate;                 /*<  8:  4> user set baudrate                                  */
+  U32                       char_frame;               /*< 12:  4> supported character framing                        */
+  U32                       flow_control;             /*< 16:  4> supported modes of flow control                    */
+  U8                        xon;                      /*< 20:  1> set/reset XON for flow control                     */
+  U8                        xoff;                     /*< 21:  1> set/reset XOFF for flow control                    */
+  U8                        esc_char;                 /*< 22:  1> ASCII character which is used in an escape sequence */
+  U8                        _align3;                  /*< 23:  1> alignment                                          */
+  U16                       guard_period;             /*< 24:  2> duration value for escape sequence                 */
+  U8                        _align4;                  /*< 26:  1> alignment                                          */
+  U8                        _align5;                  /*< 27:  1> alignment                                          */
+} T_DIO_DCB_SER;
+
+typedef struct
+{
+  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
+  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
+  U8                        _align0;                  /*<  5:  1> alignment                                          */
+  U8                        _align1;                  /*<  6:  1> alignment                                          */
+  U8                        _align2;                  /*<  7:  1> alignment                                          */
+  U32                       baudrate;                 /*<  8:  4> user set baudrate                                  */
+  U32                       char_frame;               /*< 12:  4> supported character framing                        */
+  U32                       flow_control;             /*< 16:  4> supported modes of flow control                    */
+  U8                        xon;                      /*< 20:  1> set/reset XON for flow control                     */
+  U8                        xoff;                     /*< 21:  1> set/reset XOFF for flow control                    */
+  U8                        esc_char;                 /*< 22:  1> ASCII character which is used in an escape sequence */
+  U8                        _align3;                  /*< 23:  1> alignment                                          */
+  U16                       guard_period;             /*< 24:  2> duration value for escape sequence                 */
+  U8                        _align4;                  /*< 26:  1> alignment                                          */
+  U8                        _align5;                  /*< 27:  1> alignment                                          */
+  U32                       device_mode;              /*< 28:  4> work mode of device                                */
+  U32                       mux_mode;                 /*< 32:  4> supported multiplexer modes                        */
+  U16                       n1;                       /*< 36:  2> max frame size of mux frame                        */
+  U8                        n2;                       /*< 38:  1> max number of retransmissions                      */
+  U8                        t1;                       /*< 39:  1> acknowledgement timer                              */
+  U8                        t2;                       /*< 40:  1> response timer                                     */
+  U8                        t3;                       /*< 41:  1> wake up response timer                             */
+  U8                        k;                        /*< 42:  1> windows size                                       */
+  U8                        _align6;                  /*< 43:  1> alignment                                          */
+} T_DIO_DCB_SER_MUX;
+
+typedef struct
+{
+  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
+  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
+  U8                        _align0;                  /*<  5:  1> alignment                                          */
+  U8                        _align1;                  /*<  6:  1> alignment                                          */
+  U8                        _align2;                  /*<  7:  1> alignment                                          */
+} T_DIO_DCB_PKT;
+
+/*
+ *  Data Control
+ */
+typedef struct 
+{
+  U16 control_type ; 
+  U16 length ; 
+}T_DIO_CTRL ; 
+
+typedef struct 
+{
+  U16 control_type; 
+  U16 length;
+  U32 state;
+} T_DIO_CTRL_LINES; 
+
+typedef struct 
+{
+  U16 control_type ; 
+  U16 length ; 
+  U32 state;
+}T_DIO_CTRL_MUX ; 
+
+/*
+ *  DIO Data format.
+ */
+typedef struct
+{
+  U8                        _align0;                  /*<  0:  1> alignment                                          */
+  U8                        _align1;                  /*<  1:  1> alignment                                          */
+  U16                       c_data;                   /*<  2:  2> counter                                            */
+  U8                        *ptr_data;                /*<  4:  4> pointer to  pointer to the first byte of the data buffer segment */
+} T_dio_segment;
+
+typedef struct
+{
+  U16                       length;                   /*<  0:  2> len of dio_ctrl                                    */
+  U8                        _align0;                  /*<  2:  1> alignment                                          */
+  U8                        c_dio_segment;            /*<  3:  1> counter                                            */
+  T_dio_segment             *ptr_dio_segment;         /*<  4:  4> pointer to Structured Element                      */
+} T_dio_buffer;
+
+/*==== PROTOTYPES ===========================================================*/
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_init
++------------------------------------------------------------------------------
+| Description : The function initializes the interface and the drivers.
+|
+| Parameters  : none
+|
+| Return      : DRV_OK          - Initialization successful
+|               DRV_INITIALIZED - Interface already initialized
+|               DRV_INITFAILURE - Initialization failed
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_init(void);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_user_init
++------------------------------------------------------------------------------
+| Description : The function sets the signal callback of a DIO user.
+|
+| Parameters  : user_name       - DIO user name
+|               drv_handle      - unique handle for this user
+|               signal_callback - callback function for this user
+|
+| Return      : DRV_OK             - Callback successfully set
+|               DRV_INVALID_PARAMS - The specified user does not exist
+|               DRV_INTERNAL_ERROR - Internal error
+|               DRV_NOTCONFIGURED  - DIO interface is not yet initialized.
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_user_init(char const *      user_name,
+						 U16               drv_handle,
+						 T_DRV_CB_FUNC signal_callback);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_user_exit
++------------------------------------------------------------------------------
+| Description : Termination of User Operation.
+|
+| Parameters  : user_name - DIO user name
+|
+| Return      : DRV_OK             - User operation successfully terminated.
+|               DRV_INVALID_PARAMS - User operation can not be terminated yet.
+|               DRV_INTERNAL_ERROR - Internal error
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_user_exit(char const * user_name);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_exit
++------------------------------------------------------------------------------
+| Description : Termination of the Interface.
+|
+| Parameters  : none
+|
+| Return      : none
+|
++------------------------------------------------------------------------------
+*/
+extern void dio_exit(void);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_set_rx_buffer
++------------------------------------------------------------------------------
+| Description : This function provides a receive buffer to the driver.
+|
+| Parameters  : device - device number
+|               buffer - buffer to copy received data in it
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_BUFFER_FULL    - Buffer queue full.
+|               DRV_INVALID_PARAMS - The specified device does not exist or
+|                                    the data buffer is not big enough.
+|               DRV_INTERNAL_ERROR - Internal driver error
+|               DRV_NOTCONFIGURED  - The device is not yet configured
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_set_rx_buffer(U32            device,
+							 T_dio_buffer * buffer);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_read
++------------------------------------------------------------------------------
+| Description : This function returns a receive buffer and control information.
+|
+| Parameters  : device       - device number
+|               control_info - control information from the driver
+|               buffer       - buffer with received data in it
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - The specified device does not exist
+|               DRV_INTERNAL_ERROR - Internal driver error
+|               DRV_NOTCONFIGURED  - The device is not yet configured
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_read(U32             device,
+					T_DIO_CTRL *    control_info,
+					T_dio_buffer ** buffer);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_write
++------------------------------------------------------------------------------
+| Description : This function provides a send buffer to the driver which
+|               contains data to send.
+|
+| Parameters  : device       - device number
+|               control_info - control information for the driver
+|               buffer       - buffer with data to send
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_BUFFER_FULL    - Buffer queue full.
+|               DRV_INVALID_PARAMS - The specified device does not exist or
+|                                    the data buffer to big.
+|               DRV_INTERNAL_ERROR - Internal driver error
+|               DRV_NOTCONFIGURED  - The device is not yet configured
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_write(U32            device,
+					 T_DIO_CTRL *   control_info,
+					 T_dio_buffer * buffer);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_get_tx_buffer
++------------------------------------------------------------------------------
+| Description : This function returns a send buffer provided via dio_write().
+|
+| Parameters  : device - device number
+|               buffer - return sent data buffer
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - The specified device does not exist
+|               DRV_INTERNAL_ERROR - Internal driver error
+|               DRV_NOTCONFIGURED  - The device is not yet configured
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_get_tx_buffer(U32             device,
+							 T_dio_buffer ** buffer);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_clear
++------------------------------------------------------------------------------
+| Description : This function is used to clear the hardware send buffer.
+|
+| Parameters  : device - device number
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - The specified device does not exist
+|               DRV_INTERNAL_ERROR - Internal driver error
+|               DRV_NOTCONFIGURED  - The device is not yet configured
+|               DRV_INPROCESS      - The driver is busy clearing the buffer
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_clear(U32 device);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_flush
++------------------------------------------------------------------------------
+| Description : With this function the driver is requested to inform the
+|               user, when data of the hardware send buffer have been written
+|               successfully.
+|
+| Parameters  : device - device number
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - The specified device does not exist
+|               DRV_INTERNAL_ERROR - Internal driver error
+|               DRV_NOTCONFIGURED  - The device is not yet configured
+|               DRV_INPROCESS      - The driver is busy flushing the buffer
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_flush(U32 device);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_get_capabilities
++------------------------------------------------------------------------------
+| Description : This function is used to retrieve the capabilities of a device.
+|
+| Parameters  : device       - device number
+|               capabilities - Return: Pointer to the device capabilities
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - The specified device does not exist
+|               DRV_INTERNAL_ERROR - Internal driver error
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_get_capabilities(U32                device,
+								T_DIO_CAP  ** capabilities);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_set_config
++------------------------------------------------------------------------------
+| Description : This function is used to configure a device.
+|
+| Parameters  : device - device number
+|               dcb    - pointer to a device control block
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - parameter invalid or out of range
+|               DRV_INTERNAL_ERROR - Internal driver error
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_set_config(U32         device,
+						  T_DIO_DCB * dcb);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_get_config
++------------------------------------------------------------------------------
+| Description : This function reads the device configuration.
+|
+| Parameters  : device - device number
+|               dcb    - pointer to a device control block
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - The specified device does not exist or
+|                                    wrong Device Control Block provided.
+|               DRV_INTERNAL_ERROR - Internal driver error
+|               DRV_NOTCONFIGURED  - The device is not yet configured
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_get_config(U32         device,
+						  T_DIO_DCB * dcb);
+
+/*
++------------------------------------------------------------------------------
+| Function    : dio_close_device
++------------------------------------------------------------------------------
+| Description : This function is used to close a device.
+|
+| Parameters  : device - device number
+|
+| Return      : DRV_OK             - Function successful
+|               DRV_INVALID_PARAMS - The specified device can not be closed yet
+|               DRV_INTERNAL_ERROR - Internal driver error
+|
++------------------------------------------------------------------------------
+*/
+extern U16 dio_close_device(U32 device); 
+ 
+#endif /* __DIO_H__ */