FreeCalypso > hg > tcs211-pirelli
view chipsetsw/drivers/drv_core/clkm/clkm.h @ 17:45adf5e17b9d
pdt_2092 configuration compiles
| author | Space Falcon <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Sun, 06 Sep 2015 02:55:33 +0000 |
| parents | 509db1a7b7b8 |
| children |
line wrap: on
line source
/****************************************************************************** TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : clkm.h Description : Header file for the CLKM module Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.19 Date and time : 07/01/03 Previous delta : 10/19/01 15:25:25 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/mod/emu_p/EMU_P_FRED_CLOCK/drivers1/common/SCCS/s.clkm.h Sccs Id (SID) : '@(#) clkm.h 1.10 10/23/01 14:34:54 ' *****************************************************************************/ #include "l1sw.cfg" #include "chipset.cfg" #include "board.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #if (CHIPSET == 12) #include "sys_map.h" #endif #if (CHIPSET == 12) #define CLKM_ARM_CLK C_MAP_CLKM_BASE /* CLKM registers addr. */ #else #define CLKM_ARM_CLK MEM_CLKM_ADDR /* CLKM ARM CLock Control reg.*/ #endif #define CLKM_MCLK_EN 0x0001 #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define MASK_CLKIN 0x0006 #endif #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define CLKM_CLKIN0 0x0002 // Mask to select between DPLL and VTCXO or CLKIN #else #define CLKM_LOW_FRQ 0x0002 // Mask to select low frequency input CLK_32K #endif #define CLKM_CLKIN_SEL 0x0004 // Mask to select between VTCXO and CLKIN #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define CLKM_ARM_MCLK_XP5 0x0008 // Mask to enable the 1.5 or 2.5 division factor #define CLKM_MCLK_DIV 0x0070 // Mask to configure the division factor #else #define MASK_ARM_MCLK_1P5 0x0008 // Mask to enable the 1.5 division factor #define CLKM_MCLK_DIV 0x0030 // Mask to configure the division factor #endif #define CLKM_DEEP_PWR 0x0f00 // Mask to configure deep power #define CLKM_DEEP_SLEEP 0x1000 // Mask to configure deep sleep #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define CLKM_SEL_DPLL 0x0000 // Selection of DPLL for ARM clock generation #define CLKM_SEL_VTCXO 0x0001 // Selection of VTCXO for ARM clock generation #define CLKM_SEL_CLKIN 0x0003 // Selection of CLKIN for ARM clock generation #define CLKM_ENABLE_XP5 0x0001 // Enable 1.5 or 2.5 division factor #define CLKM_DISABLE_XP5 0x0000 // Disable 1.5 or 2.5 division factor #define CLKM_ARM_MCLK_DIV_OFFSET 4 // Offset of ARM_MCLK_DIV bits in CNTL_ARM_CLK register #define CLKM_ARM_CLK_RESET 0x1081 // Reset value of CNTL_ARM_CLK register #endif #if (CHIPSET == 12) #define CLKM_CNTL_ARM_CLK (C_MAP_CLKM_BASE + 0x00) #define CLKM_CNTL_CLK (C_MAP_CLKM_BASE + 2) /* CLKM Clock Control reg. */ #else #define CLKM_CNTL_ARM_CLK (MEM_CLKM_ADDR + 0x00) #define CLKM_CNTL_CLK (MEM_CLKM_ADDR + 2) /* CLKM Clock Control reg. */ #endif #define CLKM_IRQ_DIS 0x0001 // IRQ clock is disabled and enabled according to the sleep command #define CLKM_BRIDGE_DIS 0x0002 // BRIDGE clock is disabled and enabled according to the sleep command #define CLKM_TIMER_DIS 0x0004 // TIMER clock is disabled and enabled according to the sleep command #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define CLKM_DPLL_DIS 0x0008 // DPLL is set in IDLE when both DSP and ARM are respectively in IDLE3 and sleep mode #else #define CLKM_PLL_SEL 0x0008 // CLKIN input is connected to the PLL #endif #define CLKM_CLKOUT_EN 0x0010 // Enable CLKOUT(2:0) output clocks #if (CHIPSET == 4) #define CLKM_EN_IDLE3_FLG 0x0020 // DSP idle flag control the API wait state #define CLKM_VTCXO_26 0x0040 // VTCXO is divided by 2 #elif (CHIPSET == 6) #define CLKM_VTCXO_26 0x0040 // VTCXO is divided by 2 #elif (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) #define CLKM_EN_IDLE3_FLG 0x0020 // DSP idle flag control the API wait state #define CLKM_VCLKOUT_2 0x0040 // VTCXO is divided by 2 #define CLKM_VTCXO_2 0x0080 // Input clock to DPLL is divided by 2 #endif #if (CHIPSET == 12) #define CLKM_CNTL_RST (C_MAP_CLKM_BASE + 4) /* CLKM Reset Control reg. */ #else #define CLKM_CNTL_RST (MEM_CLKM_ADDR + 4) /* CLKM Reset Control reg. */ #endif #define CLKM_LEAD_RST 0x0002 #define CLKM_EXT_RST 0x0004 #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define DPLL_LOCK 0x0001 // Mask of DPLL lock status #define DPLL_BYPASS_DIV 0x000C // Mask of bypass mode configuration #define DPLL_PLL_ENABLE 0x0010 // Enable DPLL #define DPLL_PLL_DIV 0x0060 // Mask of division factor configuration #define DPLL_PLL_MULT 0x0F80 // Mask of multiply factor configuration #define DPLL_BYPASS_DIV_1 0x00 // Configuration of bypass mode divided by 1 #define DPLL_BYPASS_DIV_2 0x01 // Configuration of bypass mode divided by 2 #define DPLL_BYPASS_DIV_4 0x10 // Configuration of bypass mode divided by 4 #define DPLL_BYPASS_DIV_OFFSET 2 // Offset of bypass bits configuration #define DPLL_PLL_DIV_OFFSET 5 // Offset of division bits configuration #define DPLL_PLL_MULT_OFFSET 7 // Offset of multiply bits configuration #define DPLL_LOCK_DIV_1 0x0000 // Divide by 1 when DPLL is locked #define DPLL_LOCK_DIV_2 0x0001 // Divide by 2 when DPLL is locked #define DPLL_LOCK_DIV_3 0x0002 // Divide by 3 when DPLL is locked #define DPLL_LOCK_DIV_4 0x0003 // Divide by 4 when DPLL is locked #else #define CLKM_LEAD_PLL_CNTL (MEM_CLKM_ADDR + 6) /* Lead PLL */ #define CLKM_PLONOFF 0x0001 // PLL enable signal #define CLKM_PLMUL 0x001e // Mask of multiply factor configuration #define CLKM_PLLNDIV 0x0020 // PLL or divide mode selection #define CLKM_PLDIV 0x0040 // Mask of multiply factor configuration #define CLKM_LEAD_PLL_CNTL_MSK 0x00ef // Mask of PLL control register #endif #if (CHIPSET == 12) #define CLKM_CNTL_CLK_DSP (C_MAP_CLKM_BASE + 0x8A) /* CLKM CNTL_CLK_REG register */ #define CLKM_NB_DSP_DIV_VALUE 4 #define CLKM_DSP_DIV_1 0x00 #define CLKM_DSP_DIV_1_5 0x01 #define CLKM_DSP_DIV_2 0x02 #define CLKM_DSP_DIV_3 0x03 #define CLKM_DSP_DIV_MASK 0x0003 extern const double dsp_div_value[CLKM_NB_DSP_DIV_VALUE]; /*--------------------------------------------------------------- * CLKM_DSP_DIV_FACTOR() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Set the DSP division factor *--------------------------------------------------------------*/ #define CLKM_DSP_DIV_FACTOR(d_dsp_div) (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK_DSP = d_dsp_div) /*--------------------------------------------------------------- * CLKM_READ_DSP_DIV() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Read DSP division factor *--------------------------------------------------------------*/ #define CLKM_READ_DSP_DIV ((* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK_DSP) & CLKM_DSP_DIV_MASK) #define CLKM_GET_DSP_DIV_VALUE dsp_div_value[CLKM_READ_DSP_DIV] #endif /*--------------------------------------------------------------- * CLKM_SETLEADRESET() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Set the LEAD reset signal *--------------------------------------------------------------*/ #define CLKM_SETLEADRESET (* (volatile SYS_UWORD16 *) CLKM_CNTL_RST |= CLKM_LEAD_RST) /*--------------------------------------------------------------- * CLKM_RELEASELEADRESET() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Release the LEAD reset signal *--------------------------------------------------------------*/ #define CLKM_RELEASELEADRESET (* (volatile SYS_UWORD16 *) CLKM_CNTL_RST &= ~CLKM_LEAD_RST) /*--------------------------------------------------------------- * CLKM_SETEXTRESET() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Set the external reset signal *--------------------------------------------------------------*/ #define CLKM_SETEXTRESET ( * (volatile SYS_UWORD16 *) CLKM_CNTL_RST |= CLKM_EXT_RST) /*--------------------------------------------------------------- * CLKM_CLEAREXTRESET() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Clear the external reset signal *--------------------------------------------------------------*/ #define CLKM_CLEAREXTRESET (* (volatile SYS_UWORD16 *) CLKM_CNTL_RST &= ~CLKM_EXT_RST) /*--------------------------------------------------------------- * CLKM_POWERDOWNARM() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Power down the ARM mcu *--------------------------------------------------------------*/ #define CLKM_POWERDOWNARM (* (volatile SYS_UWORD16 *) CLKM_ARM_CLK &= ~CLKM_MCLK_EN) /*--------------------------------------------------------------- * CLKM_SET1P5() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Set ARM_MCLK_1P5 bit *--------------------------------------------------------------*/ #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define CLKM_SETXP5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK |= CLKM_ARM_MCLK_XP5) #else #define CLKM_SET1P5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK |= 0x0008) #endif /*--------------------------------------------------------------- * CLKM_RESET1P5() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Reset ARM_MCLK_1P5 bit *--------------------------------------------------------------*/ #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define CLKM_RESETXP5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK &= ~CLKM_ARM_MCLK_XP5) #else #define CLKM_RESET1P5 ( * (volatile SYS_UWORD16 *) CLKM_ARM_CLK &= 0xfff7) #endif /*--------------------------------------------------------------- * CLKM_INITCNTL() *-------------------------------------------------------------- * Parameters : value to write in the CNTL register * Return : none * Functionality :Initialize the CLKM Control Clock register *--------------------------------------------------------------*/ #define CLKM_INITCNTL(value) (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= value) #if ((CHIPSET != 4) && (CHIPSET != 7) && (CHIPSET != 8) && (CHIPSET != 10) && (CHIPSET != 11) && (CHIPSET != 12)) /*--------------------------------------------------------------- * CLKM_INITLEADPLL() *-------------------------------------------------------------- * Parameters : value to write in the CNTL_PLL LEAD register * Return : none * Functionality :Initialize LEAD PLL control register *--------------------------------------------------------------*/ #define CLKM_INITLEADPLL(value) (* (volatile SYS_UWORD16 *) CLKM_LEAD_PLL_CNTL = value) #endif #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) /*-------------------------------------------------------------- * CLKM_DPLL_SWITH_OFF_MODE_CONFIG() *-------------------------------------------------------------- * Parameters : None * Return : none * Functionality : Configure DPLL switch off mode *--------------------------------------------------------------*/ #define CLKM_DPLL_SWITH_OFF_MODE_CONFIG (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= \ (CLKM_DPLL_DIS | CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS)) /*-------------------------------------------------------------- * CLKM_RESET_DPLL_SWITH_OFF_MODE_CONFIG() *-------------------------------------------------------------- * Parameters : None * Return : none * Functionality : Reset configuration of DPLL switch off mode *--------------------------------------------------------------*/ #define CLKM_RESET_DPLL_SWITH_OFF_MODE_CONFIG (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK &=\ ~(CLKM_DPLL_DIS | CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS)) /*-------------------------------------------------------------- * CLKM_FORCE_API_HOM_IN_IDLE3() *-------------------------------------------------------------- * Parameters : None * Return : none * Functionality : SAM/HOM wait-state register force to HOM when * DSP is in IDLE3 mode */ /*--------------------------------------------------------------*/ #define CLKM_FORCE_API_HOM_IN_IDLE3 (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= (CLKM_EN_IDLE3_FLG)) #if (CHIPSET == 4) /*-------------------------------------------------------------- * CLKM_USE_VTCXO_26MHZ() *-------------------------------------------------------------- * Parameters : None * Return : none * Functionality : Divide by 2 the clock used by the peripheral * when using external VTCXO at 26 MHz instead * of 13MHz *--------------------------------------------------------------*/ #define CLKM_USE_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= (CLKM_VTCXO_26)) /*-------------------------------------------------------------- * CLKM_UNUSED_VTCXO_26MHZ() *-------------------------------------------------------------- * Parameters : None * Return : none * Functionality : Use VTCXO=13MHz *--------------------------------------------------------------*/ #define CLKM_UNUSED_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK &= ~(CLKM_VTCXO_26)) #elif (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) /*-------------------------------------------------------------- * CLKM_UNUSED_VTCXO_26MHZ() *-------------------------------------------------------------- * Parameters : None * Return : none * Functionality : Use VTCXO=13MHz *--------------------------------------------------------------*/ #define CLKM_USE_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK |= (CLKM_VTCXO_2)) #define CLKM_UNUSED_VTCXO_26MHZ (* (volatile SYS_UWORD16 *) CLKM_CNTL_CLK &= ~(CLKM_VCLKOUT_2 | CLKM_VTCXO_2)) #endif #if (CHIPSET == 12) #define DPLL_SET_PLL_ENABLE (* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE |= DPLL_PLL_ENABLE) #define DPLL_RESET_PLL_ENABLE (* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE &= ~DPLL_PLL_ENABLE) #define DPLL_INIT_BYPASS_MODE(d_bypass_mode) { \ *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) &= ~DPLL_BYPASS_DIV; \ *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) |= (d_bypass_mode << DPLL_BYPASS_DIV_OFFSET); \ } #define DPLL_INIT_DPLL_CLOCK(d_pll_div, d_pll_mult) { \ *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) &= ~(DPLL_PLL_DIV | DPLL_PLL_MULT); \ *((volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) |= (d_pll_div << DPLL_PLL_DIV_OFFSET) |\ (d_pll_mult << DPLL_PLL_MULT_OFFSET); \ } #define DPLL_READ_DPLL_DIV ( ((* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) & DPLL_PLL_DIV) >> DPLL_PLL_DIV_OFFSET) #define DPLL_READ_DPLL_MUL ( ((* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) & DPLL_PLL_MULT)>> DPLL_PLL_MULT_OFFSET) #define DPLL_READ_DPLL_LOCK ( (* (volatile SYS_UWORD16 *) C_MAP_DPLL_BASE) & DPLL_LOCK) #else #define DPLL_SET_PLL_ENABLE (* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR |= DPLL_PLL_ENABLE) #define DPLL_RESET_PLL_ENABLE (* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR &= ~DPLL_PLL_ENABLE) #define DPLL_INIT_BYPASS_MODE(d_bypass_mode) { \ *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) &= ~DPLL_BYPASS_DIV; \ *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) |= (d_bypass_mode << DPLL_BYPASS_DIV_OFFSET); \ } #define DPLL_INIT_DPLL_CLOCK(d_pll_div, d_pll_mult) { \ *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) &= ~(DPLL_PLL_DIV | DPLL_PLL_MULT); \ *((volatile SYS_UWORD16 *) MEM_DPLL_ADDR) |= (d_pll_div << DPLL_PLL_DIV_OFFSET) |\ (d_pll_mult << DPLL_PLL_MULT_OFFSET); \ } #define DPLL_READ_DPLL_DIV ( ((* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR) & DPLL_PLL_DIV) >> DPLL_PLL_DIV_OFFSET) #define DPLL_READ_DPLL_MUL ( ((* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR) & DPLL_PLL_MULT)>> DPLL_PLL_MULT_OFFSET) #define DPLL_READ_DPLL_LOCK ( (* (volatile SYS_UWORD16 *) MEM_DPLL_ADDR) & DPLL_LOCK) #endif /* (CHIPSET == 12) */ #endif /* ----- Prototypes ----- */ #if (BOARD == 34) void CLKM_InitARMClock(int src, int div); #elif ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) void CLKM_InitARMClock(SYS_UWORD16 clk_src, SYS_UWORD16 clk_div, SYS_UWORD16 clk_xp5); #else void CLKM_InitARMClock(SYS_UWORD16 clk_src, SYS_UWORD16 clk_div); #endif #if (BOARD == 34) void CLKM_SetMclkDiv(int div); void CLKM_EnableDPLL(int enable); void CLKM_EnableSharedMemClock(int enable); void CLKM_InitLeadClock(int onoff, int mul, int ndiv, int div); #endif void wait_ARM_cycles(SYS_UWORD32 cpt_loop); void initialize_wait_loop(void); SYS_UWORD32 convert_nanosec_to_cycles(SYS_UWORD32 time);