# This is the template file for creating symbols with tragesym
# every line starting with '#' is a comment line.

[options]
# rotate_labels rotates the pintext of top and bottom pins
# wordswap swaps labels if the pin is on the right side an looks like this:
# "PB1 (CLK)"
wordswap=yes
rotate_labels=no
sort_labels=no
generate_pinseq=yes
sym_width=2800
pinwidthvertikal=400
pinwidthhorizontal=400

[geda_attr]
# name will be printed in the top of the symbol
# if you have a device with slots, you'll have to use slot= and slotdef=
# use comment= if there are special information you want to add
version=20030525
name=RS8973
device=RS8973
refdes=U?
footprint=QFP100
description=RS8973 bitpump, clock and analog (3 of 5)
documentation=
author=Michael Sokolov <msokolov@ivan.Harhan.ORG>
numslots=0
#slot=1
#slotdef=1:
#slotdef=2:
#slotdef=3:
#slotdef=4:
#comment=
#comment=

[pins]
# tabseparated list of pin descriptions
# pinnr is the physical number of the pin
# seq is the pinseq= attribute, leave it blank if it doesn't matter
# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
# style can be (line,dot,clk,dotclk,none). none if only want to add a net
# posit. can be (l,r,t,b) or empty for nets
# net specifies the name of the Vcc or GND name
# label represents the pinlabel. 
#	negation lines can be added with _Q_ 
#	if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
#-----------------------------------------------------
#pinnr	seq	type	style	posit.	net	label	
#-----------------------------------------------------
56		pas	line	r		RBIAS
58		pas	line	r		VCOMO
57		pas	line	r		VCOMI
59		pas	line	r		VCCAP
51		pas	line	r		VRXP
52		pas	line	r		VRXN
60		pas	line	r		VTXP
61		pas	line	r		VTXN

40		clk	clk	l		XTALI/MCLK
39		out	line	l		XTALO
35		out	line	l		HCLK
36		out	line	l		XOUT