3GPP Specification Change Requests

Go to spec numbering scheme page

Back to series index

Back to spec details

Go to current work plan


3GPP Specification Change Request records for: 25.462

CR no. rev cat Release CR written to vers new vers CR title TSG meeting TSG doc TSG status source WG meeting WG doc WG status cover date work item remarks database record created
0001 - F Rel-6 6.0.0 6.1.0 Minor Corrections and editorial changes to 25.462 according to RAN3#44 RP-26 RP-040444 approved R3 R3-45 R3-041450 Agreed 2004-11-30 RANimp-TiltAnt - 2004-12-10
0002 - C Rel-6 6.0.0 - New reset functionality in the RETAP protocol - - - R3 R3-45 R3-041525 Revised 2004-11-30 RANimp-TiltAnt - 2004-12-10
0002 1 C Rel-6 6.0.0 - New reset functionality in the RETAP protocol - - - R3 R3-45 R3-041634 Rejected 2004-11-30 RANimp-TiltAnt - 2004-12-10
0003 - F Rel-6 6.0.0 - Maximum data payload size in the Transport Layer. - - - R3 R3-45 R3-041529 Revised 2004-11-30 RANimp-TiltAnt - 2004-12-10
0003 1 F Rel-6 6.0.0 - Maximum data payload size in the Transport Layer. - - - R3 R3-45 R3-041585 Revised 2004-11-30 RANimp-TiltAnt - 2004-12-10
0003 2 F Rel-6 6.0.0 - Maximum data payload size in the Transport Layer. - - - R3 R3-45 R3-041637 Revised 2004-11-30 RANimp-TiltAnt - 2004-12-10
0003 3 F Rel-6 6.0.0 6.1.0 Maximum data payload size in the Transport Layer. RP-26 RP-040444 approved R3 R3-45 R3-041678 Agreed 2004-11-30 RANimp-TiltAnt - 2004-12-10
0004 - F Rel-6 6.1.0 - Improvement of Device Scan Procedure - - - R3 R3-46 R3-050053 Withdrawn 2005-03-01 RANimp-TiltAnt - 2005-03-02
0005 - F Rel-6 6.1.0 - PL field of window size - - - R3 R3-46 R3-050056 Rejected 2005-03-01 RANimp-TiltAnt - 2005-03-02
0006 - D Rel-6 6.1.0 - Editorial Corrections to 25.462 after RAN3#45 - - - R3 R3-46 R3-050154 Revised 2005-03-01 RANimp-TiltAnt - 2005-03-02
0006 1 D Rel-6 6.1.0 6.2.0 Editorial Corrections to 25.462 after RAN3#45 RP-27 RP-050061 approved R3 R3-46 R3-050266 Agreed 2005-03-01 RANimp-TiltAnt - 2005-03-02
0007 - F Rel-6 6.1.0 - Correction of definition of Secondary Payload Transmit/Receive Length - - - R3 R3-46 R3-050156 Revised 2005-03-01 RANimp-TiltAnt - 2005-03-02
0007 1 F Rel-6 6.1.0 6.2.0 Correction of definition of Secondary Payload Transmit/Receive Length RP-27 RP-050061 approved R3 R3-46 R3-050267 Agreed 2005-03-01 RANimp-TiltAnt - 2005-03-02
0008 - F Rel-6 6.1.0 6.2.0 Clarification on HDLC Parameter Negotiation RP-27 RP-050061 approved R3 R3-46 R3-050157 Agreed 2005-03-01 RANimp-TiltAnt - 2005-03-02
0009 - F Rel-6 6.1.0 - Clarification on Address Assignment - - - R3 R3-46 R3-050165 Revised 2005-03-01 RANimp-TiltAnt - 2005-03-02
0009 1 F Rel-6 6.1.0 - Clarification on Address Assignment - - - R3 R3-46 R3-050268 Rejected 2005-03-01 RANimp-TiltAnt - 2005-03-02
0010 - C Rel-6 6.1.0 - Device scan update - - - R3 R3-46 R3-050196 Withdrawn 2005-03-01 RANimp-TiltAnt - 2005-03-02
0011 - F Rel-6 6.1.0 - Correction of address assignment example - - - R3 R3-46 R3-050197 Revised 2005-03-01 RANimp-TiltAnt - 2005-03-02
0011 1 F Rel-6 6.1.0 6.2.0 Correction of address assignment example RP-27 RP-050061 approved R3 R3-46 R3-050269 Agreed 2005-03-01 RANimp-TiltAnt - 2005-03-02
0012 - C Rel-6 6.1.0 - Reset in the transport layer - - - R3 R3-46 R3-050198 Withdrawn 2005-03-01 RANimp-TiltAnt - 2005-03-02
0013 - C Rel-6 6.1.0 6.2.0 Reset in transport layer RP-27 RP-050061 approved R3 R3-46 R3-050272 Agreed 2005-03-01 RANimp-TiltAnt - 2005-03-02
0014 - C Rel-6 6.1.0 - Clarification on unique ID and device scan - - - R3 R3-46 R3-050273 Revised 2005-03-01 RANimp-TiltAnt - 2005-03-02
0014 1 C Rel-6 6.1.0 6.2.0 Clarification on unique ID and device scan RP-27 RP-050061 approved R3 R3-46 R3-050342 Agreed 2005-03-01 RANimp-TiltAnt - 2005-03-02
0015 - F Rel-6 6.2.0 - Reference update and correction of XID description - - - R3 R3-47 R3-050643 Revised 2005-05-25 RANimp-TiltAnt - 2005-05-26
0015 1 F Rel-6 6.2.0 - Reference update and correction of XID description - - - R3 R3-47 R3-050709 Rejected 2005-05-25 RANimp-TiltAnt - 2005-05-26
0016 - F Rel-6 6.2.0 - Removal of Option 4 (use of UI frames) - - - R3 R3-48 R3-050951 Revised 2005-09-13 RANimp-TiltAnt - 2005-09-14
0016 1 F Rel-6 6.2.0 - Removal of Option 4 (use of UI frames) - - - R3 R3-48 R3-050990 Revised 2005-09-13 RANimp-TiltAnt - 2005-09-14
0016 2 F Rel-6 6.2.0 6.3.0 Removal of Option 4 (use of UI frames) RP-29 RP-050439 approved R3 R3-48 R3-051011 Agreed 2005-09-13 RANimp-TiltAnt - 2005-09-14
0017 - F Rel-6 6.3.0 - Combined XID Negotiations - - - R3 R3-54 R3-061847 Revised 2006-11-20 RANimp-TiltAnt - 2006-11-29
0017 1 F Rel-6 6.3.0 6.4.0 Combined XID Negotiations RP-34 RP-060701 approved R3 R3-54 R3-061997 Agreed 2006-11-20 RANimp-TiltAnt - 2006-11-29
0018 - A Rel-7 7.0.0 - Combined XID Negotiations - - - R3 R3-54 R3-061848 Revised 2006-11-20 RANimp-TiltAnt - 2006-11-29
0018 1 A Rel-7 7.0.0 7.1.0 Combined XID Negotiations RP-34 RP-060701 approved R3 R3-54 R3-061998 Agreed 2006-11-20 RANimp-TiltAnt - 2006-11-29
0019 - F Rel-6 6.4.0 - Clarification of broadcast message handling after reset (paragraph 4.3) - - - R3 R3-55 R3-070100 Revised 2007-02-28 RANimp-TiltAnt - 2007-03-09
0019 1 F Rel-6 6.4.0 - Clarification of broadcast message handling after reset (paragraph 4.3) - - - R3 R3-55 R3-070340 Rejected 2007-02-28 RANimp-TiltAnt - 2007-03-09
0020 - A Rel-7 7.1.0 - Clarification of broadcast message handling after reset (paragraph 4.3) - - - R3 R3-55 R3-070101 Revised 2007-02-28 RANimp-TiltAnt - 2007-03-09
0020 1 F Rel-7 7.1.0 7.2.0 Clarification of broadcast message handling after reset (paragraph 4.3) RP-35 RP-070056 approved R3 R3-55 R3-070341 Agreed 2007-02-28 RANimp-TiltAnt - 2007-03-09
0021 - B Rel-7 7.1.0 - Introduction of TMA - - - R3 R3-55 R3-070110 Revised 2007-02-28 RANimp-TMA - 2007-03-09
0021 1 B Rel-7 7.1.0 - Introduction of TMA - - - R3 R3-55 R3-070354 Revised 2007-02-28 RANimp-TMA - 2007-03-09
0021 2 B Rel-7 7.1.0 7.2.0 Introduction of TMA RP-35 RP-070058 approved R3 R3-55 R3-070514 Agreed 2007-02-28 RANimp-TMA - 2007-03-09
0022 - F Rel-7 7.1.0 - Missing requirement of maximum allowed secondary station response time - - - R3 R3-55 R3-070126 Revised 2007-02-28 TEI7 - 2007-03-09
0022 1 F Rel-7 7.1.0 7.2.0 Missing requirement of maximum allowed secondary station response time RP-35 RP-070056 approved R3 R3-55 R3-070480 Agreed 2007-02-28 RANimp-TiltAnt - 2007-03-09
0023 - F Rel-7 7.2.0 7.3.0 Word alignment of station-device RP-36 RP-070323 approved R3 R3-56 R3-070786 Agreed 2007-05-22 RANimp-TiltAnt - 2007-05-23
0024 - F Rel-7 7.2.0 7.3.0 Specification of message gap length RP-36 RP-070323 approved R3 R3-56 R3-070787 Agreed 2007-05-22 RANimp-TiltAnt - 2007-05-23
0025 - F Rel-6 6.4.0 - Unique ID length - - - R3 R3-56 R3-071024 Revised 2007-05-22 RANimp-TiltAnt - 2007-05-23
0025 1 F Rel-6 6.4.0 6.5.0 Unique ID length RP-36 RP-070321 approved R3 R3-56 R3-071112 Agreed 2007-05-22 RANimp-TiltAnt - 2007-05-23
0026 - A Rel-7 7.2.0 - Unique ID length - - - R3 R3-56 R3-071025 Revised 2007-05-22 RANimp-TiltAnt - 2007-05-23
0026 1 A Rel-7 7.2.0 7.3.0 Unique ID length RP-36 RP-070321 approved R3 R3-56 R3-071113 Agreed 2007-05-22 RANimp-TiltAnt - 2007-05-23
0027 - F Rel-7 7.2.0 - AISG protocol version - - - R3 R3-56 R3-071114 Rejected 2007-05-22 RANimp-TMA - 2007-05-23
0028 - F Rel-7 7.3.0 7.4.0 Assigned value for device type TMA RP-37 RP-070570 approved R3 R3-57 R3-071321 Agreed 2007-09-05 RANimp-TMA - 2007-09-05
0029 - F Rel-8 8.0.0 - RET and TMA support in LTE - - - - R3-63 R3-090386 Revised 2009-02-03 LTE-interfacess - 2009-03-03
0029 1 F Rel-8 8.0.0 8.1.0 RET and TMA support in LTE RP-43 RP-090085 approved R3 R3-63 R3-090469 Agreed 2009-02-10 LTE-interfaces - 2009-03-03
0030 - D Rel-9 - - Removal of unused references - - - R3 R3-71 R3-110552 Not Treated 2011-03-14 TEI9 - 2011-03-14
0031 - D Rel-10 - - Removal of unused references - - - R3 R3-71 R3-110553 Not Treated 2011-03-14 TEI10 - 2011-03-14
0032 - F Rel-10 10.0.1 10.1.0 Removal of unused references RP-52 RP-110685 approved R3 R3-72 R3-111303 Agreed 2011-05-23 TEI10 - 2011-05-23

page generated from database: 2013-10-16 10:33:49