comparison src/cs/system/main/init.c @ 519:838eeafb0051

Main and Audio source directories lowercased
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Jul 2018 07:41:05 +0000
parents src/cs/system/Main/init.c@706f4b71aceb
children 92dbfa906f66
comparison
equal deleted inserted replaced
518:4b7e0dba42f6 519:838eeafb0051
1 /*
2 * INIT.C
3 *
4 * This module allows to initialize the board:
5 * - wait states,
6 * - unmask selected interrupts,
7 * - initialize clock,
8 * - disable watchdog.
9 * Dummy functions used by the EVA3 library are defined.
10 */
11
12 /* Config Files */
13
14 #ifndef _WINDOWS
15 #include "l1sw.cfg"
16 #include "rf.cfg"
17 #include "chipset.cfg"
18 #include "board.cfg"
19 #include "swconfig.cfg"
20 #include "fc-target.cfg"
21 #if (OP_L1_STANDALONE == 0)
22 #include "rv.cfg"
23 #include "sys.cfg"
24 #include "debug.cfg"
25 #ifdef BLUETOOTH_INCLUDED
26 #include "btemobile.cfg"
27 #endif
28 #ifdef BLUETOOTH
29 #include "bluetooth.cfg"
30 #endif
31 #endif
32
33 #if (OP_L1_STANDALONE == 0)
34 #include "rv/rv_defined_swe.h"
35 #endif
36 #endif
37
38 /* Include Files */
39 #include <assert.h>
40 #include <ctype.h>
41 #include <stdarg.h>
42 #include <stdlib.h>
43 #include <string.h>
44
45 #include "nucleus.h"
46
47 #include "sys_types.h"
48 #include "l1_types.h"
49 #include "l1_confg.h"
50 #include "l1_const.h"
51
52 #if TESTMODE
53 #include "l1tm_defty.h"
54 #endif // TESTMODE
55
56 #if (AUDIO_TASK == 1)
57 #include "l1audio_const.h"
58 #include "l1audio_cust.h"
59 #include "l1audio_defty.h"
60 #endif // AUDIO_TASK
61
62 #if (L1_GTT == 1)
63 #include "l1gtt_const.h"
64 #include "l1gtt_defty.h"
65 #endif
66
67 #if (L1_MP3 == 1)
68 #include "l1mp3_defty.h"
69 #endif
70
71 #if (L1_MIDI == 1)
72 #include "l1midi_defty.h"
73 #endif
74
75 #if (L1_AAC == 1)
76 #include "l1aac_defty.h"
77 #endif
78 #if (L1_DYN_DSP_DWNLD == 1)
79 #include "l1_dyn_dwl_defty.h"
80 #endif
81
82 #if (TRACE_TYPE == 4)
83 #include "l1_defty.h"
84 #endif
85
86
87 #if ((OP_L1_STANDALONE == 1) && (CODE_VERSION != SIMULATION) && (PSP_STANDALONE == 0))
88
89 #if (AUDIO_TASK == 1)
90 #include "l1audio_signa.h"
91 #include "l1audio_msgty.h"
92 #endif // AUDIO_TASK
93
94 #if (L1_GTT == 1)
95 #include "l1gtt_signa.h"
96 #include "l1gtt_msgty.h"
97 #endif
98
99 #include "l1_defty.h"
100 #include "cust_os.h"
101 #include "l1_msgty.h"
102 #include "nu_main.h"
103 #include "l1_varex.h"
104 #include "l1_proto.h"
105 #include "hw_debug.h"
106 #include "l1_trace.h"
107
108 #endif /* ((OP_L1_STANDALONE == 1) && (CODE_VERSION != SIMULATION) && (PSP_STANDALONE==0)) */
109
110
111 #include "armio/armio.h"
112 #include "timer/timer.h"
113
114 #if (OP_L1_STANDALONE == 0)
115 #include "rvf/rvf_api.h"
116 #include "rvm/rvm_api.h" /* A-M-E-N-D-E-D! */
117 #include "sim/sim.h"
118 #endif
119
120 #include "abb/abb.h"
121
122 #include "inth/iq.h"
123 #include "tpudrv.h"
124 #include "memif/mem.h"
125 #include "clkm/clkm.h"
126 #include "inth/inth.h"
127
128 #if (OP_L1_STANDALONE == 1)
129 #include "uart/serialswitch_core.h"
130 #else
131 #include "uart/serialswitch.h"
132 #endif
133 #include "uart/traceswitch.h"
134
135
136 #include "dma/dma.h"
137 #include "rhea/rhea_arm.h"
138
139 #include "ulpd/ulpd.h"
140
141 #if (PSP_STANDALONE == 0)
142 #if (OP_L1_STANDALONE == 0)
143 extern void ffs_main_init(void);
144 extern void create_tasks(void);
145 #if TI_NUC_MONITOR == 1
146 extern void ti_nuc_monitor_tdma_action( void );
147 #endif
148
149 #if WCP_PROF == 1
150 #if PRF_CALIBRATION == 1
151 extern NU_HISR prf_CalibrationHISR;
152 #endif
153 #endif
154
155 #else
156 void l1ctl_pgm_clk32(UWORD32 nb_hf, UWORD32 nb_32khz);
157 extern void L1_trace_string(char *s);
158 #endif /* (OP_L1_STANDALONE) */
159 #endif
160
161 #if (OP_L1_STANDALONE == 1)
162 #if ((TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==7) || TESTMODE)
163 #include "uart/uart.h"
164 /*
165 * Serial Configuration set up.
166 */
167
168 extern char ser_cfg_info[NUMBER_OF_TR_UART];
169 #include "rvt_gen.h"
170 extern T_RVT_USER_ID trace_id;
171 #endif
172 #endif /* (OP_L1_STANDALONE == 1) */
173
174 /*
175 * Serial Configuration set up.
176 */
177
178 /*
179 ** One config is:
180 ** {XXX_BT_HCI, // Bluetooth HCI
181 ** XXX_FAX_DATA, // Fax/Data AT-Cmd
182 ** XXX_TRACE, // L1/Riviera Trace Mux
183 ** XXX_TRACE}, // Trace PS
184 **
185 ** with XXX being DUMMY, UART_IRDA or UART_MODEM
186 */
187
188 #if ((((TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==7) ||\
189 (TESTMODE)) && (OP_L1_STANDALONE == 1)) || (OP_L1_STANDALONE == 0))
190 #if (OP_L1_STANDALONE == 1)
191 static T_AppliSerialInfo appli_ser_cfg_info =
192 #else
193 T_AppliSerialInfo appli_ser_cfg_info =
194 #endif /* OP_L1_STANDALONE */
195 {
196 #ifdef CONFIG_RVTMUX_ON_MODEM
197 {DUMMY_BT_HCI,
198 DUMMY_FAX_DATA,
199 UART_MODEM_TRACE,
200 DUMMY_TRACE}, // 0x0248
201 #else // RVTMUX_ON_MODEM
202 {DUMMY_BT_HCI,
203 UART_MODEM_FAX_DATA,
204 UART_IRDA_TRACE,
205 DUMMY_TRACE}, // default config = 0x0168
206 #endif
207 #ifdef BTEMOBILE
208 12, // 12 serial config allowed
209 #else // BTEMOBILE
210 9, // 9 serial config allowed
211 #endif
212 {
213 // Configs with Condat Panel only
214 {DUMMY_BT_HCI,
215 DUMMY_FAX_DATA,
216 DUMMY_TRACE,
217 UART_IRDA_TRACE}, // 0x1048
218 {DUMMY_BT_HCI,
219 DUMMY_FAX_DATA,
220 DUMMY_TRACE,
221 UART_MODEM_TRACE}, // 0x2048
222 // Configs with L1/Riviera Trace only
223 {DUMMY_BT_HCI,
224 DUMMY_FAX_DATA,
225 UART_IRDA_TRACE,
226 DUMMY_TRACE}, // 0x0148
227 {DUMMY_BT_HCI,
228 DUMMY_FAX_DATA,
229 UART_MODEM_TRACE,
230 DUMMY_TRACE}, // 0x0248
231 // Configs with AT-Cmd only
232 {DUMMY_BT_HCI,
233 UART_MODEM_FAX_DATA,
234 DUMMY_TRACE,
235 DUMMY_TRACE}, // 0x0068
236 // Configs with Condat Panel and L1/Riviera Trace
237 {DUMMY_BT_HCI,
238 DUMMY_FAX_DATA,
239 UART_MODEM_TRACE,
240 UART_IRDA_TRACE}, // 0x1248
241 {DUMMY_BT_HCI,
242 DUMMY_FAX_DATA,
243 UART_IRDA_TRACE,
244 UART_MODEM_TRACE}, // 0x2148
245 // Configs with Condat Panel and AT-Cmd
246 {DUMMY_BT_HCI,
247 UART_MODEM_FAX_DATA,
248 DUMMY_TRACE,
249 UART_IRDA_TRACE}, // 0x1068
250 #ifdef BTEMOBILE
251 // Configs with L1/Riviera Trace and Bluetooth HCI
252 {UART_IRDA_BT_HCI,
253 DUMMY_FAX_DATA,
254 UART_MODEM_TRACE,
255 DUMMY_TRACE}, // 0x0249
256 {UART_MODEM_BT_HCI,
257 DUMMY_FAX_DATA,
258 UART_IRDA_TRACE,
259 DUMMY_TRACE}, // 0x014A
260 // Configs with AT-Cmd and Bluetooth HCI
261 {UART_IRDA_BT_HCI,
262 UART_MODEM_FAX_DATA,
263 DUMMY_TRACE,
264 DUMMY_TRACE}, // 0x0069
265 #endif // BTEMOBILE
266 // Configs with L1/Riviera Trace and AT-Cmd
267 {DUMMY_BT_HCI,
268 UART_MODEM_FAX_DATA,
269 UART_IRDA_TRACE,
270 DUMMY_TRACE} // 0x0168
271 }
272 };
273 #endif /* (TRACE_TYPE ...) || (OP_L1_STANDALONE == 0) */
274
275
276 /*
277 * Init_Target
278 *
279 * Performs low-level HW Initialization.
280 */
281 void Init_Target(void)
282 {
283 #if (BOARD == 5)
284 #define WS_ROM (1)
285 #define WS_RAM (1)
286 #define WS_APIF (1)
287 #define WS_CS2 (7) /* LCD on EVA3. */
288 #define WS_CS0 (7) /* DUART on EVA3. UART16750 and latch on A-Sample. */
289 #define WS_CS1 (7) /* LCD on A-Sample. */
290
291 IQ_InitWaitState (WS_ROM, WS_RAM, WS_APIF, WS_CS2, WS_CS0, WS_CS1);
292 IQ_InitClock (2); /* Internal clock division factor. */
293
294 IQ_MaskAll (); /* Mask all interrupts. */
295 IQ_SetupInterrupts (); /* IRQ priorities. */
296
297 TM_DisableWatchdog ();
298
299 /*
300 * Reset all TSP and DBG fdefault values
301 */
302
303 AI_ResetTspIO ();
304 AI_ResetDbgReg ();
305 AI_ResetIoConfig ();
306
307 /*
308 * Warning! The external reset signal is connected to the Omega and the
309 * external device. If the layer 1 is used its initialization removes
310 * the external reset. If the application does not use the layer 1
311 * you must remove the external reset (bit 2 of the reset control
312 * register 0x505808).
313 */
314
315 AI_ResetTspIO();
316 AI_ResetDbgReg();
317 AI_ResetIoConfig();
318
319 /*
320 * Configure all IOs (see RD300 specification).
321 */
322
323 AI_ConfigBitAsInput (1);
324 AI_EnableBit (1);
325
326 AI_ConfigBitAsOutput (2);
327 AI_EnableBit (2);
328
329 AI_ConfigBitAsInput (11);
330 AI_EnableBit (11);
331
332 AI_ConfigBitAsOutput (13);
333 AI_EnableBit (13);
334
335 AI_Power (1); /* Maintain power supply. */
336
337 #elif (BOARD == 6) || (BOARD == 7) || (BOARD == 8) || (BOARD == 9) || \
338 (BOARD == 40) || (BOARD == 41) || (BOARD == 42) || (BOARD == 43) || (BOARD == 45) || \
339 (BOARD == 35) || (BOARD == 46) || (BOARD == 70) || (BOARD == 71)
340
341 #if (PSP_STANDALONE == 0)
342 // RIF/SPI rising edge clock for ULYSSE
343 //--------------------------------------------------
344 #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)|| (ANLG_FAM == 11))
345 #if ((CHIPSET >= 3))
346 #if (CHIPSET == 12)
347 F_CONF_RIF_RX_RISING_EDGE;
348 F_CONF_SPI_RX_RISING_EDGE;
349 #elif (CHIPSET == 15)
350 //do the DRP init here for Locosto
351 #if (L1_DRP == 1)
352 // drp_power_on(); This should be done after the script is downloaded.
353 #endif
354 #else
355 #if (BOARD==35)
356 *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x2000;
357 #elif defined(CONFIG_TARGET_PIRELLI)
358 /*
359 * Pirelli's version of this Init_Target() function
360 * in their fw sets the ASIC_CONF register to 0x6050,
361 * which means PWL on the LT/PWL pin and LPG on the
362 * DSR_MODEM pin.
363 */
364 *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x6050;
365 #elif defined(CONFIG_TARGET_GTAMODEM)
366 /*
367 * The DSR_MODEM/LPG Calypso signal is unconnected on
368 * Openmoko's modem, so let's mux it as LPG (output)
369 * so it doesn't float, like Foxconn seem to have done
370 * on the Pirelli.
371 */
372 *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x6040;
373 #else
374 *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x6000;
375 #endif /* (BOARD == 35) */
376 #endif
377 #endif
378 #endif /* ANLG(ANALOG)) */
379
380 #if (OP_L1_STANDALONE == 1)
381 #if (BOARD == 40) || (BOARD == 41) || \
382 (BOARD == 42) || (BOARD == 43) || (BOARD == 45)
383 // enable 8 Ohm amplifier for audio on D-sample
384 AI_ConfigBitAsOutput (1);
385 AI_SetBit(1);
386 #elif (BOARD == 70) || (BOARD == 71)
387 //Locosto I-sample or UPP costo board.BOARD
388 // Initialize the ARMIO bits as per the I-sample spec
389 // FIXME
390 #endif
391 #endif /* (OP_L1_STANDALONE == 1) */
392 #endif /* PSP_STANDALONE ==0 */
393
394 // Watchdog
395 //--------------------------------------------------
396 TM_DisableWatchdog(); /* Disable Watchdog */
397 #if (CHIPSET == 12) || (CHIPSET == 15)
398 TM_SEC_DisableWatchdog();
399 #endif
400
401 #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) || (CHIPSET == 15))
402
403 #if (CHIPSET == 12)
404
405 #if 0 /* example of configuration for DMA debug */
406 #if (BOARD == 6) /* debug on EVA 4 , GPO2 must not be changed */
407
408 /* TPU_FRAME, NMIIT, IACKn */
409 F_DBG_IRQ_CONFIG(C_DBG_IRQ_IRQ4|C_DBG_IRQ_NMIIT|C_DBG_IRQ_IACKN);
410
411 /* NDMA_REQ_VIEW1, NDMA_REQ_VIEW0, DMA_V(1), DMA_S(1), DMAREQ_P1(3:0)*/
412 F_DBG_DMA_P1_NDFLASH_CONFIG(C_DBG_DMA_P1_NDFLASH_NDMA_REQ_VIEW_1 |
413 C_DBG_DMA_P1_NDFLASH_NDMA_REQ_VIEW_0 |
414 C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_3 |
415 C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_2 |
416 C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_1 |
417 C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_0 |
418 C_DBG_DMA_P1_NDFLASH_DMA_REQ_S_1 |
419 C_DBG_DMA_P1_NDFLASH_DMA_REQ_V1 );
420 /* DMA_REQ_S(2)*/
421 F_DBG_DMA_P2_CONFIG(C_DBG_DMA_P2_DMA_REQ_S2);
422
423 /* DMA_CLK_REQ, BRIDGE_CLK */
424 F_DBG_CLK1_CONFIG(C_DBG_CLK1_DMA_CLK_REQ |
425 C_DBG_CLK1_BRIDGE_CLK );
426
427 /* XIO_nREADY */
428 F_DBG_IMIF_CONFIG(C_DBG_IMIF_XIO_NREADY_MEM);
429
430 /* DSP_nIRQ_VIEW1, DSP_nIRQ_VIEW0, BRIDGE_EN */
431 F_DBG_KB_USIM_SHD_CONFIG(C_DBG_KB_USIM_SHD_DSP_NIRQ_VIEW_1 |
432 C_DBG_KB_USIM_SHD_DSP_NIRQ_VIEW_0 |
433 C_DBG_KB_USIM_SHD_BRIDGE_EN );
434
435 /* RHEA_nREADY , RHEA_nSTROBE */
436 F_DBG_USIM_CONFIG(C_DBG_USIM_RHEA_NSTROBE |
437 C_DBG_USIM_RHEA_NREADY );
438
439 /* XIO_STROBE */
440 F_DBG_MISC2_CONFIG(C_DBG_MISC2_X_IOSTRBN);
441
442 /* DMA_CLK_REQ */
443 F_DBG_CLK2_CONFIG(C_DBG_CLK2_DMA_CLK_REQ2);
444
445 /* DSP_IRQ_SEL0=DMA, DSP_IRQ_SEL1=DMA, DMA_REQ_SEL0=RIF_RX, DMA_REQ_SEL1=RIF_RX */
446 F_DBG_VIEW_CONFIG(0,0,C_DBG_DSP_INT_DMA,
447 C_DBG_DSP_INT_DMA,
448 C_DMA_CHANNEL_RIF_RX,
449 C_DMA_CHANNEL_RIF_RX);
450
451 #endif /* (BOARD == 6) */
452 #endif /* DMA debug example */
453 #else
454 /*
455 * Configure ASIC in order to output the DPLL and ARM clock
456 */
457 // (*( volatile UWORD16* )(0xFFFEF008)) = 0x8000; // DPLL
458 // (*( volatile UWORD16* )(0xFFFEF00E)) = 0x0004; // ARM clock
459 // (*( volatile UWORD16* )(0xfffef004)) = 0x0600; // DSP clock + nIACK
460 #endif /* (CHIPSET == 12) || CHIPSET == 15*/
461
462
463 /*
464 * Enable/Disable of clock switch off for INTH, TIMER, BRIDGE and DPLL modules
465 */
466 // IRQ, Timer and bridge may SLEEP
467 // In first step, same configuration as SAMSON
468 //--------------------------------------------------
469 #if (CHIPSET == 12)
470 CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS | CLKM_BRIDGE_DIS | CLKM_DPLL_DIS);
471 #elif (CHIPSET == 15)
472 CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS | CLKM_CPORT_EN | CLKM_BRIDGE_DIS | 0x8000 ); /* CLKM_DPLL_DIS is remove by Ranga*/
473
474 #else
475 CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS);
476
477 // Select VTCXO input frequency
478 //--------------------------------------------------
479 CLKM_UNUSED_VTCXO_26MHZ;
480
481 // Rita RF uses 26MHz VCXO
482 #if (RF_FAM == 12)
483 CLKM_USE_VTCXO_26MHZ;
484 #endif
485 // Renesas RF uses 26MHz on F-sample but 13MHz on TEB
486 #if (RF_FAM == 43) && (BOARD == 46)
487 CLKM_USE_VTCXO_26MHZ;
488 #endif
489 #endif
490
491
492 // Control HOM/SAM automatic switching
493 //--------------------------------------------------
494 *((volatile unsigned short *) CLKM_CNTL_CLK) &= ~CLKM_EN_IDLE3_FLG;
495
496 /*
497 * The following part has been reconstructed from disassembly.
498 */
499 RHEA_INITRHEA(0,0,0xFF);
500 DPLL_INIT_BYPASS_MODE(DPLL_BYPASS_DIV_1);
501 #if (CHIPSET == 8)
502 DPLL_INIT_DPLL_CLOCK(DPLL_LOCK_DIV_1, 6);
503 #elif (CHIPSET == 10)
504 DPLL_INIT_DPLL_CLOCK(DPLL_LOCK_DIV_1, 8);
505 #else
506 #error "We only have DPLL setup for CHIPSETs 8 and 10"
507 #endif
508 CLKM_InitARMClock(0x00, 2, 0); /* no low freq, no ext clock, div by 1 */
509 /*
510 * FreeCalypso change: memory timings and widths
511 * are target-dependent.
512 */
513 #ifdef CONFIG_TARGET_PIRELLI
514 /*
515 * Pirelli's version of this Init_Target() function
516 * in their fw does the following:
517 */
518 MEM_INIT_CS0(4, MEM_DVS_16, MEM_WRITE_EN, 0);
519 MEM_INIT_CS1(4, MEM_DVS_16, MEM_WRITE_EN, 0);
520 MEM_INIT_CS2(5, MEM_DVS_16, MEM_WRITE_EN, 0);
521 MEM_INIT_CS3(4, MEM_DVS_16, MEM_WRITE_EN, 0);
522 MEM_INIT_CS4(7, MEM_DVS_16, MEM_WRITE_EN, 0);
523 #elif defined(CONFIG_TARGET_FCFAM)
524 /*
525 * The settings currently adopted for the FreeCalypso
526 * hardware family, only nCS0, nCS1 and nCS2 are used
527 * presently.
528 */
529 MEM_INIT_CS0(4, MEM_DVS_16, MEM_WRITE_EN, 0);
530 MEM_INIT_CS1(4, MEM_DVS_16, MEM_WRITE_EN, 0);
531 MEM_INIT_CS2(4, MEM_DVS_16, MEM_WRITE_EN, 0);
532 MEM_INIT_CS3(4, MEM_DVS_16, MEM_WRITE_EN, 0);
533 MEM_INIT_CS4(4, MEM_DVS_16, MEM_WRITE_EN, 0);
534 #elif defined(CONFIG_TARGET_DSAMPLE) && (CHIPSET == 8)
535 /*
536 * On D-Sample C05 (older Calypso silicon version) the clocks
537 * run slower: the ARM clock runs at 39 MHz instead of 52 MHz.
538 * Therefore, we need to use fewer wait states to effect
539 * the same memory speed.
540 */
541 MEM_INIT_CS0(2, MEM_DVS_16, MEM_WRITE_EN, 0);
542 MEM_INIT_CS1(2, MEM_DVS_16, MEM_WRITE_EN, 0);
543 MEM_INIT_CS2(2, MEM_DVS_16, MEM_WRITE_EN, 0);
544 MEM_INIT_CS3(2, MEM_DVS_16, MEM_WRITE_EN, 0);
545 MEM_INIT_CS4(0, MEM_DVS_8, MEM_WRITE_EN, 0);
546 #else
547 /*
548 * The original settings from Openmoko,
549 * only nCS0 and nCS1 are actually used,
550 * same as on Mot C1xx phones,
551 * the nCS2/3/4 settings are dummies from TI.
552 */
553 MEM_INIT_CS0(3, MEM_DVS_16, MEM_WRITE_EN, 0);
554 MEM_INIT_CS1(3, MEM_DVS_16, MEM_WRITE_EN, 0);
555 MEM_INIT_CS2(5, MEM_DVS_16, MEM_WRITE_EN, 0);
556 MEM_INIT_CS3(3, MEM_DVS_16, MEM_WRITE_EN, 0);
557 MEM_INIT_CS4(0, MEM_DVS_8, MEM_WRITE_EN, 0);
558 #endif
559 MEM_INIT_CS6(0, MEM_DVS_32, MEM_WRITE_EN, 0);
560 MEM_INIT_CS7(0, MEM_DVS_32, MEM_WRITE_DIS, 0);
561 RHEA_INITAPI(0,1);
562 RHEA_INITARM(0,0);
563 DPLL_SET_PLL_ENABLE;
564
565 /*
566 * Disable and Clear all pending interrupts
567 */
568 #if (CHIPSET == 12) || (CHIPSET == 15)
569 F_INTH_DISABLE_ALL_IT; // MASK all it
570 F_INTH2_VALID_NEXT(C_INTH_IRQ); // reset current IT in INTH2 IRQ
571 F_INTH_VALID_NEXT(C_INTH_IRQ); // reset current IT in INTH IRQ
572 F_INTH_VALID_NEXT(C_INTH_FIQ); // reset current IT in INTH FIQ
573 F_INTH_RESET_ALL_IT; // reset all IRQ/FIQ source
574 #else
575 INTH_DISABLEALLIT;
576 #if 0 /* not present in our reference binary object */
577 INTH_RESETALLIT;
578 #endif
579 INTH_CLEAR; /* reset IRQ/FIQ source */
580 #endif
581
582 // INTH
583 //--------------------------------------------------
584 #if (CHIPSET == 12) || (CHIPSET == 15)
585 #if (GSM_IDLE_RAM != 0)
586 f_inth_setup((T_INTH_CONFIG *)a_inth_config_idle_ram); // setup configuration IT handlers
587 #else
588 f_inth_setup((T_INTH_CONFIG *)a_inth_config); // setup configuration IT handlers
589 #endif
590 #else
591 IQ_SetupInterrupts();
592 #endif
593
594
595 #if (CHIPSET == 12) || (CHIPSET == 15)
596 #if (OP_L1_STANDALONE == 0)
597
598 f_dma_global_parameter_set((T_DMA_TYPE_GLOBAL_PARAMETER *)&d_dma_global_parameter);
599 #endif
600 f_dma_channel_allocation_set(C_DMA_CHANNEL_0, C_DMA_CHANNEL_DSP);
601 #if (OP_L1_STANDALONE == 1)
602 f_dma_global_parameter_set((T_DMA_TYPE_GLOBAL_PARAMETER *)&d_dma_global_parameter);
603 f_dma_channel_allocation_set(C_DMA_CHANNEL_0, C_DMA_CHANNEL_DSP);
604 #endif
605
606 #else
607 // DMA
608 //--------------------------------------------------
609 // channel0 = Arm, channel1 = Lead, channel2 = forced to Arm, channel3=forced to Arm, dma_burst = 0001, priority = same
610 #if (OP_L1_STANDALONE == 0)
611 DMA_ALLOCDMA(1,0,1,1); // Channel 1 used by DSP with RIF RX
612 #endif
613 #endif
614
615 /* CHIPSET = 4 or 7 or 8 or 10 or 11 or 12 */
616
617 #else
618
619 // RHEA Bridge
620 //--------------------------------------------------
621 // ACCES_FAC_0 = 0, ACCES_FAC_1 = 0 ,TIMEOUT = 0x7F
622 RHEA_INITRHEA(0,0,0x7F);
623
624 #if (CHIPSET == 6)
625 // WS_H = 1 , WS_L = 15
626 RHEA_INITAPI(1,15); // should be 0x01E1 for 65 Mhz
627 #else
628 // WS_H = 0 , WS_L = 7
629 RHEA_INITAPI(0,7); // should be 0x0101 for 65 Mhz
630 #endif
631
632 // Write_en_0 = 0 , Write_en_1 = 0
633 RHEA_INITARM(0,0);
634
635 // INTH
636 //--------------------------------------------------
637 INTH_DISABLEALLIT; // MASK all it
638 INTH_CLEAR; // reset IRQ/FIQ source
639 IQ_SetupInterrupts();
640
641 // DMA
642 //--------------------------------------------------
643 // channel0 = Arm, channel1 = Lead, dma_burst = 0001, priority = same
644 DMA_ALLOCDMA(1,0,1,1); // should be 0x25 (channel 1 = lead)
645
646 #if (CHIPSET == 6)
647 // Memory WS configuration for ULYSS/G1 (26 Mhz) board
648 //-----------------------------------------------------
649 MEM_INIT_CS2(2,MEM_DVS_16,MEM_WRITE_EN,0);
650 #endif
651
652 // CLKM
653 //--------------------------------------------------
654 CLKM_InitARMClock(0x00, 2); /* no low freq, no ext clock, div by 1 */
655
656 #if (CHIPSET == 6)
657 CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS | CLKM_VTCXO_26);
658 #else
659 CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS);
660 #endif
661
662 #endif /* CHIPSET = 4 or 7 or 8 or 10 or 11 or 12 */
663
664 // Freeze ULPD timer ....
665 //--------------------------------------------------
666 *((volatile SYS_UWORD16 *) ULDP_GSM_TIMER_INIT_REG ) = 0;
667 *((volatile SYS_UWORD16 *) ULDP_GSM_TIMER_CTRL_REG ) = TPU_FREEZE;
668
669 // reset INC_SIXTEEN and INC_FRAC
670 //--------------------------------------------------
671 #if (OP_L1_STANDALONE == 1)
672 l1ctl_pgm_clk32(DEFAULT_HFMHZ_VALUE,DEFAULT_32KHZ_VALUE);
673 #else
674 ULDP_INCSIXTEEN_UPDATE(132); //32768.29038 =>132, 32500 => 133
675 // 26000 --> 166
676 ULDP_INCFRAC_UPDATE(15840); //32768.29038 =>15840, 32500 => 21845
677 // 26000 --> 43691
678 #endif /* OP_L1_STANDALONE */
679
680 // program ULPD WAKE-UP ....
681 //=================================================
682 #if (CHIPSET == 2)
683 *((volatile SYS_UWORD16 *)ULDP_SETUP_FRAME_REG) = SETUP_FRAME; // 2 frame
684 *((volatile SYS_UWORD16 *)ULDP_SETUP_VTCXO_REG) = SETUP_VTCXO; // 31 periods
685 *((volatile SYS_UWORD16 *)ULDP_SETUP_SLICER_REG) = SETUP_SLICER; // 31 periods
686 *((volatile SYS_UWORD16 *)ULDP_SETUP_CLK13_REG) = SETUP_CLK13; // 31 periods
687 #else
688 *((volatile SYS_UWORD16 *)ULDP_SETUP_FRAME_REG) = SETUP_FRAME; // 3 frames
689 *((volatile SYS_UWORD16 *)ULDP_SETUP_VTCXO_REG) = SETUP_VTCXO; // 0 periods
690 *((volatile SYS_UWORD16 *)ULDP_SETUP_SLICER_REG) = SETUP_SLICER; // 31 periods
691 *((volatile SYS_UWORD16 *)ULDP_SETUP_CLK13_REG) = SETUP_CLK13; // 31 periods
692 *((volatile SYS_UWORD16 *)ULPD_SETUP_RF_REG) = SETUP_RF; // 31 periods
693 #endif
694
695 // Set Gauging versus HF (PLL)
696 //=================================================
697 ULDP_GAUGING_SET_HF; // Enable gauging versus HF
698 ULDP_GAUGING_HF_PLL; // Gauging versus PLL
699
700 // current supply for quartz oscillation
701 //=================================================
702 #if (OP_L1_STANDALONE == 1)
703 #if ((CHIPSET != 9) && (CHIPSET != 12) && (CHIPSET !=15)) // programming model changed for Ulysse C035, stay with default value
704 *(volatile SYS_UWORD16 *)QUARTZ_REG = 0x27;
705 #endif
706 #else
707 #if ((BOARD == 6) || (BOARD == 8) || (BOARD == 9) || (BOARD == 35) || (BOARD == 40) || (BOARD == 41))
708 *((volatile SYS_UWORD16 *)QUARTZ_REG) = 0x27;
709 #elif (BOARD == 7)
710 *((volatile SYS_UWORD16 *)QUARTZ_REG) = 0x24;
711 #endif
712 #endif /* OP_L1_STANDALONE */
713
714 // stop Gauging if any (debug purpose ...)
715 //--------------------------------------------------
716 if ( *((volatile SYS_UWORD16 *) ULDP_GAUGING_CTRL_REG) & ULDP_GAUGING_EN)
717 {
718 volatile UWORD32 j;
719 ULDP_GAUGING_STOP; /* Stop the gauging */
720 /* wait for gauging it*/
721 // one 32khz period = 401 periods of 13Mhz
722 for (j=1; j<50; j++);
723 while (! (* (volatile SYS_UWORD16 *) ULDP_GAUGING_STATUS_REG) & ULDP_IT_GAUGING);
724 }
725
726 #if (OP_L1_STANDALONE == 0)
727 AI_ClockEnable ();
728
729 #if (BOARD == 7)
730 // IOs configuration of the B-Sample in order to optimize the power consumption
731 AI_InitIOConfig();
732
733 // Set LPG instead of DSR_MODEM
734 *((volatile SYS_UWORD16 *) ASIC_CONF) |= 0x40;
735 // Reset the PERM_ON bit of LCR_REG
736 *((volatile SYS_UWORD16 *) MEM_LPG) &= ~(0x80);
737 #elif ((BOARD == 8) || (BOARD == 9))
738 // IOs configuration of the C-Sample in order to optimize the power consumption
739 AI_InitIOConfig();
740
741 // set the debug latch to 0x00.
742 *((volatile SYS_UWORD8 *) 0x2800000) = 0x00;
743 #elif ((BOARD == 35) || (BOARD == 46))
744 AI_InitIOConfig();
745 // CSMI INTERFACE
746 // Initialize CSMI clients for GSM control
747 // and Fax/Data services
748 CSMI_Init();
749 GC_Initialize(); // GSM control initialization
750 CU_Initialize(); // Trace initialization
751 CF_Initialize(); // Fax/Data pre-initialization
752 #elif ((BOARD == 40) || (BOARD == 41))
753 // IOs configuration of the D-Sample in order to optimize the power consumption
754 AI_InitIOConfig();
755
756 #ifdef BTEMOBILE
757 // Reset BT chip by toggling the Island's nRESET_OUT signal
758 *((volatile SYS_UWORD16 *) 0xFFFFFD04) |= 0x04;
759 *((volatile SYS_UWORD16 *) 0xFFFFFD04) &= ~(0x4);
760 #endif
761
762 // set the debug latch to 0x0000.
763 /*
764 * FreeCalypso change: this write is only correct when running
765 * on an actual D-Sample board, but not on any of the real-world
766 * Calypso target devices.
767 */
768 #ifdef CONFIG_TARGET_DSAMPLE
769 *((volatile SYS_UWORD16 *) 0x2700000) = 0x0000;
770 #endif
771 #endif // BOARD
772
773 // Enable HW Timers 1 & 2
774 TM_EnableTimer (1);
775 TM_EnableTimer (2);
776
777 #endif /* (OP_L1_STANDALONE == 0) */
778
779 #endif /* #if (BOARD == 5) */
780 }
781
782 /*
783 * Init_Drivers
784 *
785 * Performs Drivers Initialization.
786 */
787 void Set_Switch_ON_Cause(void);
788 void Init_Drivers(void)
789 {
790
791 #if (CHIPSET==15)
792 bspI2c_init();
793 bspTwl3029_init();
794
795 #if (OP_L1_STANDALONE == 0)
796 Set_Switch_ON_Cause();
797 #endif
798
799
800 /* Turn on DRP We will make VRMCC to device group Modem
801 * And Switch it on.
802 */
803 bspTwl3029_Power_setDevGrp(NULL,BSP_TWL3029_POWER_VRMMC,BSP_TWL3029_POWER_DEV_GRP_MODEM);
804 wait_ARM_cycles(convert_nanosec_to_cycles(100000*2));
805 bspTwl3029_Power_enable(NULL,BSP_TWL3029_POWER_VRMMC,BSP_TWL3029_POWER_STATE_ACTIVE);
806 #endif
807
808 #if (CHIPSET!=15)
809 #if ABB_SEMAPHORE_PROTECTION
810 // Create the ABB semaphore
811 ABB_Sem_Create();
812 #endif // SEMAPHORE_PROTECTION
813 #endif
814
815 #if (OP_L1_STANDALONE == 0)
816 /*
817 * Initialize FFS invoking restore procedure by MPU-S
818 */
819 #if ((BOARD == 35) || (BOARD == 46))
820 GC_FfsRestore();
821 #endif
822
823 /*
824 * FFS main initialization.
825 */
826
827 ffs_main_init();
828
829
830 /*
831 * Initialize Riviera manager and create tasks thanks to it.
832 */
833 #if (CHIPSET!=15) || (REMU==0)
834 rvf_init();
835 rvm_init(); /* A-M-E-M-D-E-D! */
836 create_tasks();
837 #endif
838 /*
839 * SIM Main Initialization.
840 */
841 #if (CHIPSET!=15)
842 SIM_Initialize ();
843 #else
844 bspUicc_bootInit();
845 #endif
846 #endif
847 }
848
849 /*
850 * Init_Serial_Flows
851 *
852 * Performs Serialswitch + related serial data flows initialization.
853 */
854 void Init_Serial_Flows (void)
855 {
856 #if (OP_L1_STANDALONE == 0)
857
858 /*
859 * Initialize Serial Switch module.
860 */
861 #if ((BOARD==35) || (BOARD == 46))
862 SER_InitSerialConfig (GC_GetSerialConfig());
863 #else
864 SER_InitSerialConfig (&appli_ser_cfg_info);
865 #endif
866 /*
867 * Then Initialize the Serial Data Flows and the associated UARTs:
868 * - G2-3 Trace if GSM/GPRS Protocol Stack
869 * - AT-Cmd/Fax & Data Flow
870 *
871 * Layer1/Riviera Trace Flow and Bluetooth HCI Flow are initialized
872 * by the appropriate SW Entities.
873 *
874 * G2-3 Trace => No more Used
875 */
876 SER_tr_Init(SER_PROTOCOL_STACK, TR_BAUD_38400, NULL);
877
878 /*
879 * Fax & Data / AT-Command Interpreter Serial Data Flow Initialization
880 */
881
882 #if ((BOARD != 35) && (BOARD != 46))
883 (void) SER_fd_Initialize ();
884 #endif
885 #else /* OP_L1_STANDALONE */
886
887 #if (TESTMODE || (TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==6) || (TRACE_TYPE==7))
888 #if ((BOARD == 35) || (BOARD == 46))
889 ser_cfg_info[UA_UART_0] = '0';
890 #else
891 ser_cfg_info[UA_UART_0] = 'G';
892 #endif
893 #if (CHIPSET !=15)
894 ser_cfg_info[UA_UART_1] = 'R'; // Riviear Demux on UART MODEM
895 #else
896 ser_cfg_info[UA_UART_0] = 'R'; // Riviear Demux on UART MODEM
897 #endif
898
899 /* init Uart Modem */
900 SER_InitSerialConfig (&appli_ser_cfg_info);
901
902 #if TESTMODE || (TRACE_TYPE == 1) || (TRACE_TYPE == 7)
903 SER_tr_Init (SER_LAYER_1, TR_BAUD_115200, rvt_activate_RX_HISR);
904
905 rvt_register_id("OTHER",&trace_id,(RVT_CALLBACK_FUNC)NULL);
906 #else
907 SER_tr_Init (SER_LAYER_1, TR_BAUD_38400, NULL);
908 #endif
909
910 L1_trace_string(" \n\r");
911
912 #endif /* TRACE_TYPE */
913
914 #endif /* OP_L1_STANDALONE */
915 }
916
917 /*
918 * Init_Unmask_IT
919 *
920 * Unmask all used interrupts.
921 */
922 void Init_Unmask_IT (void)
923 {
924 IQ_Unmask(IQ_FRAME);
925 IQ_Unmask(IQ_UART_IRDA_IT);
926 IQ_Unmask(IQ_UART_IT);
927 IQ_Unmask(IQ_ARMIO);
928 #if (L1_DYN_DSP_DWNLD == 1)
929 IQ_Unmask(IQ_API);
930 #endif
931 }