FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/l1gtt_signa.h @ 605:07d0dc4431f4
bootloader.s: same MEMIF fix as in int.s plus DPLL BYPASS fix
Both MEMIF and DPLL settings are now the same between int.s and bootloader.s
assembly code paths. Previously bootloader.s was setting DPLL BYPASS /2 mode,
which persisted until _INT_Initialize code with the bootloader body omitted,
or was changed to /1 in the hardware init function in the
bootloader.lib:start.obj module.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 17 Jun 2019 18:40:32 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1GTT_SIGNA.H * * Filename l1gtt_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (L1_GTT == 1) #define P_GTT ( 0x19 ) // Messages Upper layer <-> L1A #define MMI_GTT_START_REQ ( ( P_GTT << 8 ) | 1 ) #define MMI_GTT_START_CON ( ( P_GTT << 8 ) | 2 ) #define MMI_GTT_STOP_REQ ( ( P_GTT << 8 ) | 3 ) #define MMI_GTT_STOP_CON ( ( P_GTT << 8 ) | 4 ) // Messages L1S <-> L1A #define L1_GTT_START_CON ( ( P_GTT << 8 ) | 5 ) #define L1_GTT_STOP_CON ( ( P_GTT << 8 ) | 6 ) // Test messages #define TST_CLOSE_GTT_LOOP_REQ ( ( P_GTT << 8 ) | 7 ) #define TST_CLOSE_GTT_LOOP_CON ( ( P_GTT << 8 ) | 8 ) #define TST_OPEN_GTT_LOOP_REQ ( ( P_GTT << 8 ) | 9 ) #define TST_OPEN_GTT_LOOP_CON ( ( P_GTT << 8 ) | 10 ) #define TST_START_GTT_TEST_REQ ( ( P_GTT << 8 ) | 11 ) #define TST_START_GTT_TEST_CON ( ( P_GTT << 8 ) | 12 ) #define TST_STOP_GTT_TEST_REQ ( ( P_GTT << 8 ) | 13 ) #define TST_STOP_GTT_TEST_CON ( ( P_GTT << 8 ) | 14 ) #endif // L1_GTT == 1