FreeCalypso > hg > fc-magnetite
changeset 265:0aa748b6413a
src/cs/system/Main/init.c: initial import from LoCosto source
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 05 Aug 2017 02:02:16 +0000 |
| parents | 3edeadec6804 |
| children | 692f565226ef |
| files | src/cs/system/Main/init.c |
| diffstat | 1 files changed, 2369 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/cs/system/Main/init.c Sat Aug 05 02:02:16 2017 +0000 @@ -0,0 +1,2369 @@ +/* + * INIT.C + * + * This module allows to initialize the board: + * - wait states, + * - unmask selected interrupts, + * - initialize clock, + * - disable watchdog. + * Dummy functions used by the EVA3 library are defined. + */ + +/* Config Files */ + +#pragma DUPLICATE_FOR_INTERNAL_RAM_START + +#ifndef PSP_FAILSAFE +#define PSP_FAILSAFE 0 +#warn "PSP Failsafe Flag Not Defined in your Build, taking default" +#endif + + +#ifndef _WINDOWS + #include "l1sw.cfg" + #include "rf.cfg" + #include "chipset.cfg" + #include "board.cfg" + #include "swconfig.cfg" + #if (OP_L1_STANDALONE == 0) + #include "rv.cfg" + #include "sys.cfg" + #include "debug.cfg" + #ifdef BLUETOOTH_INCLUDED + #include "btemobile.cfg" + #endif + #ifdef BLUETOOTH + #include "bluetooth.cfg" + #endif + #endif + + #if (OP_L1_STANDALONE == 0) + #include "rv/rv_defined_swe.h" + #endif +#endif + +/* Include Files */ +#include <assert.h> +#include <ctype.h> +#include <stdarg.h> +#include <stdlib.h> +#include <string.h> + +#include "nucleus.h" + +#include "sys_types.h" +#include "l1_types.h" +#include "l1_confg.h" +#include "l1_const.h" +#include "pin_config.h" // added for Init tuned to Power Management + +#if TESTMODE + #include "l1tm_defty.h" +#endif // TESTMODE + +#if (AUDIO_TASK == 1) + #include "l1audio_const.h" + #include "l1audio_cust.h" + #include "l1audio_defty.h" +#endif // AUDIO_TASK + +#if (L1_GTT == 1) + #include "l1gtt_const.h" + #include "l1gtt_defty.h" +#endif + +#if (L1_MP3 == 1) + #include "l1mp3_defty.h" +#endif + +#if (L1_MIDI == 1) + #include "l1midi_defty.h" +#endif + +#if (L1_AAC == 1) + #include "l1aac_defty.h" +#endif +#if (L1_DYN_DSP_DWNLD == 1) + #include "l1_dyn_dwl_defty.h" +#endif + +#if (TRACE_TYPE == 4) + #include "l1_defty.h" +#endif + + +#if ((OP_L1_STANDALONE == 1) && (CODE_VERSION != SIMULATION) && (PSP_STANDALONE == 0)) + + #if (AUDIO_TASK == 1) + #include "l1audio_signa.h" + #include "l1audio_msgty.h" + #endif // AUDIO_TASK + + #if (L1_GTT == 1) + #include "l1gtt_signa.h" + #include "l1gtt_msgty.h" + #endif + + #include "l1_defty.h" + #include "cust_os.h" + #include "l1_msgty.h" + #include "nu_main.h" + #include "l1_varex.h" + #include "l1_proto.h" + #include "hw_debug.h" + #include "l1_trace.h" + +#endif /* ((OP_L1_STANDALONE == 1) && (CODE_VERSION != SIMULATION) && (PSP_STANDALONE==0)) */ + + +#include "armio/armio.h" +#include "timer/timer.h" + +#if (CHIPSET==15) +#include "types.h" +#include "bspI2c.h" +#include "bspTwl3029.h" +#include "bspTwl3029_I2c.h" +#include "bspTwl3029_Power.h" +#if (OP_L1_STANDALONE == 0) + #include "uicc/board/bspUicc.h" +#endif +#endif + +#if (OP_L1_STANDALONE == 0) + #include "rvf/rvf_api.h" + #include "rvm/rvm_api.h" /* A-M-E-N-D-E-D! */ + #include "sim/sim.h" +#endif + +#include "dynamic_clock.h" +#if (ANLG_FAM !=11) +#include "abb/abb.h" +#endif + +#if (BOARD==35 || BOARD==46) + #if (OP_L1_STANDALONE == 0) + #include "csmi/csmi.h" + #include "csmi/csmi_gsmctrl.h" + #include "csmi/csmi_uart.h" + #include "uart/uartfax.h" + #include "csmi/csmi_uartfax.h" + #include "ffs/ffs.h" + #include "ffs/ffspcm.h" + #include "csmi/sleep.h" + #endif /* (OP_L1_STANDALONE == 0) */ +#endif + +/* WCP Profiler */ +#if (BOARD==35 || BOARD==43 || BOARD==46) && (OP_L1_STANDALONE == 0) + #if WCP_PROF == 1 + #include "prf/prf_api.h" + #endif +#endif + +#include "inth/iq.h" +#include "tpudrv.h" +#include "memif/mem.h" +#include "clkm/clkm.h" +#include "inth/inth.h" + +#if (OP_L1_STANDALONE == 0) + void bspUicc_Phy_intCHandler(void); +#endif + + #if (OP_L1_STANDALONE == 1) + #include "uart/serialswitch_core.h" + #else + #include "uart/serialswitch.h" + #endif + #include "uart/traceswitch.h" + + +#include "dma/dma.h" +#include "rhea/rhea_arm.h" + +#include "ulpd/ulpd.h" + +#if (PSP_STANDALONE == 0) + #if (GSM_IDLE_RAM != 0) + #if (OP_L1_STANDALONE == 1) + #include "csmi_simul.h" + #else + #include "csmi/csmi.h" + #endif + #endif +#endif + +#if (CHIPSET == 12) || (CHIPSET == 15) || ((CHIPSET == 10) && (OP_WCP == 1)) + #include "memif/sys_memif.h" +#endif + +#if ((CHIPSET == 12) || (CHIPSET == 15)) + #include "timer/timer_sec.h" + #include "dma/sys_dma.h" + #include "conf/sys_conf.h" + #include "inth/sys_inth.h" + #ifdef RVM_NAN_SWE + #include "nan/nan_i.h" + #endif + #ifdef RVM_DMA_SWE + #include "dma/board/dma_inth.h" + #endif + #ifdef RVM_I2C_SWE + #include "i2c/i2c_hw_functions.h" + #endif + #ifdef RVM_MC_SWE + #include "mc/board/mc_inth.h" + #endif + #ifdef RVM_USB_SWE + #include "usb/usb_inth.h" + #endif +#endif + +#if (OP_L1_STANDALONE == 0) + #define TIMER_RESET_VALUE (0xFFFF) + + /* + * These constants define the number of ticks per TDMA when timer 0 + * is set to pre-scale=0 and the upper limit in percent of TICKS_PER_TDMA + * for the execution of synchronous layer 1. + */ + #define TICKS_PER_TDMA (1875) + #define LIMIT_FOR_L1_SYNC (80) +#endif + +UWORD16 flash_device_id; +#if (PSP_STANDALONE == 0) + #if (OP_L1_STANDALONE == 0) + extern void ffs_main_init(void); + extern void create_tasks(void); + #if TI_NUC_MONITOR == 1 + extern void ti_nuc_monitor_tdma_action( void ); + #endif + + #if WCP_PROF == 1 + #if PRF_CALIBRATION == 1 + extern NU_HISR prf_CalibrationHISR; + #endif + #endif + + #else + void l1ctl_pgm_clk32(UWORD32 nb_hf, UWORD32 nb_32khz); + extern void L1_trace_string(char *s); + #endif /* (OP_L1_STANDALONE) */ +#endif + +#if (CHIPSET == 12) || (CHIPSET == 15) +extern const T_INTH_CONFIG a_inth_config[C_INTH_NB_INTERRUPT]; +#ifdef RVM_CAMD_SWE +extern void f_camera_interrupt_manager(void); +#endif +#endif + +#if (GSM_IDLE_RAM != 0) + #if (CHIPSET == 12) || (CHIPSET == 15) + + // Interrupt handler called in case the interrupt requires the traffic controler active + // These routines need to be declared here in order to put them into the a_inth_config_idle_ram structure + extern void ext_ram_irq_inth_handler(void); + extern void ext_ram_fiq_inth_handler(void); + + + + // declared for the _intram file generated by ICL470 + extern const T_INTH_CONFIG a_inth_config_idle_ram[C_INTH_NB_INTERRUPT]; + + // Debug mode: irq ext shall be connected to the chipselect signals + #if GSM_IDLE_RAM_DEBUG + extern void flash_access_handler(void); + extern void ext_ram_access_handler(void); + #endif + #endif // CHIPSET 12 || CHIPSET 15 +#endif + +#if (PSP_STANDALONE == 0) + extern void hisr(void); + extern void layer_1_sync_HISR_entry(void); + + extern NU_HISR layer_1_sync_HISR; + + #if (CODE_VERSION != SIMULATION) + #if (BOARD == 71) + extern void INT_DisableIRQ(void); + extern void INT_EnableIRQ(void); + #endif /* (BOARD == 71) */ + #endif /* CODE_VERSION != SIMULATION */ + +#if (LOCOSTO_LITE==1) +#ifndef HISR_STACK_SHARING +#define HISR_STACK_SHARING +#endif +#endif + +#ifdef HISR_STACK_SHARING +unsigned char HISR_STACK_PRIO2[1500]={0xFE}; +#endif + +#if (OP_L1_STANDALONE == 0) + #pragma DATA_SECTION(layer_1_sync_stack,".stackandheap"); + #define LAYER_1_SYNC_STACK_SIZE (3000 /*4000*/) + extern unsigned char layer_1_sync_stack[LAYER_1_SYNC_STACK_SIZE]; + #else + #if (LONG_JUMP == 3) + #pragma DATA_SECTION(layer_1_sync_stack,".HISR_stack"); + #endif + + #if TESTMODE + extern char FAR layer_1_sync_stack[2600 /*3600*/]; // Frame interrupt task stack for EVA3 + #else + extern char FAR layer_1_sync_stack[1600 /*2600*/]; // Frame interrupt task stack for EVA3 + #endif + #endif /* OP_L1_STANDALONE */ + +#if (FF_L1_IT_DSP_USF == 1) || (FF_L1_IT_DSP_DTX == 1) + extern void api_modem_hisr(); +#if (LONG_JUMP == 3) + #pragma DATA_SECTION(API_MODEM_HISR_stack,".l1s_global"); +#endif + extern char FAR API_MODEM_HISR_stack[0x400]; // stack size to be tuned + extern NU_HISR api_modemHISR; +#endif + + #pragma DUPLICATE_FOR_INTERNAL_RAM_END + + #if !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM !=0)) + #pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_START + #if (OP_L1_STANDALONE == 0) + /* + * Timing monitor + * + * + */ + #if (TRACE_TYPE == 4) + extern T_L1A_L1S_COM l1a_l1s_com; + extern T_L1S_GLOBAL l1s; + UNSIGNED max_cpu, fn_max_cpu; + unsigned short layer_1_sync_end_time; + unsigned short max_cpu_flag; + #endif + #endif + #pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_END + #endif // !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM !=0)) + + #if (L1_EXT_AUDIO_MGT == 1) + NU_HISR EXT_AUDIO_MGT_hisr; + #ifndef HISR_STACK_SHARING + char FAR ext_audio_mgt_hisr_stack[500]; + #else + #define ext_audio_mgt_hisr_stack HISR_STACK_PRIO2 + #endif + extern void Cust_ext_audio_mgt_hisr(void); + #endif + +#if ( (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) ) // equivalent to an API_HISR flag + extern void api_hisr(void); + #ifndef HISR_STACK_SHARING + #if (LONG_JUMP == 3) + #pragma DATA_SECTION (API_HISR_stack,".l1s_global"); + #endif + + char FAR API_HISR_stack[0x400]; + #else + #define API_HISR_stack HISR_STACK_PRIO2 + #endif + NU_HISR apiHISR; + #endif // (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_DYN_DSP_DWNLD == 1) + +#if (FF_L1_IT_DSP_USF == 1) || (FF_L1_IT_DSP_DTX == 1) + #if !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM != 0)) + #pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_START + char FAR API_MODEM_HISR_stack[0x400]; // stack size to be tuned + NU_HISR api_modemHISR; + #pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_END + #endif +#endif // FF_L1_IT_DSP_USF +#endif /* PSP_STANDALONE == 0 */ + +#if (OP_L1_STANDALONE == 1) + #if ((TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==7) || TESTMODE) + #include "uart/uart.h" +/* + * Serial Configuration set up. + */ + + extern char ser_cfg_info[NUMBER_OF_TR_UART]; + #include "rvt_gen.h" + extern T_RVT_USER_ID trace_id; + #endif +#endif /* (OP_L1_STANDALONE == 1) */ + +/* + * Serial Configuration set up. + */ + +/* +** One config is: +** {XXX_BT_HCI, // Bluetooth HCI +** XXX_FAX_DATA, // Fax/Data AT-Cmd +** XXX_TRACE, // L1/Riviera Trace Mux +** XXX_TRACE}, // Trace PS +** +** with XXX being DUMMY, UART_IRDA or UART_MODEM +*/ + +#if ((((TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==7) ||\ + (TESTMODE)) && (OP_L1_STANDALONE == 1)) || (OP_L1_STANDALONE == 0)) + #if (OP_L1_STANDALONE == 1) + static T_AppliSerialInfo appli_ser_cfg_info = + #else + T_AppliSerialInfo appli_ser_cfg_info = + #endif /* OP_L1_STANDALONE */ + #if (CHIPSET!=15) + { + #ifdef BTEMOBILE + #ifdef BT_UART_USED_MODEM + {UART_MODEM_BT_HCI, + DUMMY_FAX_DATA, + UART_IRDA_TRACE, + DUMMY_TRACE}, // default config (Bluetooth on Modem) - 0x014A + #else + {UART_IRDA_TRACE, + DUMMY_FAX_DATA, + UART_MODEM_TRACE, + DUMMY_TRACE}, // default config (Bluetooth on IrDa) - 0x0249 + #endif // BT_UART_USED_MODEM + #else // BTEMOBILE + {DUMMY_BT_HCI, + UART_MODEM_FAX_DATA, + UART_IRDA_TRACE, + DUMMY_TRACE}, // default config = 0x0168 + #endif + #ifdef BTEMOBILE + 12, // 12 serial config allowed + #else // BTEMOBILE + 9, // 9 serial config allowed + #endif + { + // Configs with Condat Panel only + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + DUMMY_TRACE, + UART_IRDA_TRACE}, // 0x1048 + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + DUMMY_TRACE, + UART_MODEM_TRACE}, // 0x2048 + // Configs with L1/Riviera Trace only + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + UART_IRDA_TRACE, + DUMMY_TRACE}, // 0x0148 + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + UART_MODEM_TRACE, + DUMMY_TRACE}, // 0x0248 + // Configs with AT-Cmd only + {DUMMY_BT_HCI, + UART_MODEM_FAX_DATA, + DUMMY_TRACE, + DUMMY_TRACE}, // 0x0068 + // Configs with Condat Panel and L1/Riviera Trace + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + UART_MODEM_TRACE, + UART_IRDA_TRACE}, // 0x1248 + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + UART_IRDA_TRACE, + UART_MODEM_TRACE}, // 0x2148 + // Configs with Condat Panel and AT-Cmd + {DUMMY_BT_HCI, + UART_MODEM_FAX_DATA, + DUMMY_TRACE, + UART_IRDA_TRACE}, // 0x1068 + #ifdef BTEMOBILE + // Configs with L1/Riviera Trace and Bluetooth HCI + {UART_IRDA_BT_HCI, + DUMMY_FAX_DATA, + UART_MODEM_TRACE, + DUMMY_TRACE}, // 0x0249 + {UART_MODEM_BT_HCI, + DUMMY_FAX_DATA, + UART_IRDA_TRACE, + DUMMY_TRACE}, // 0x014A + // Configs with AT-Cmd and Bluetooth HCI + {UART_IRDA_BT_HCI, + UART_MODEM_FAX_DATA, + DUMMY_TRACE, + DUMMY_TRACE}, // 0x0069 + #endif // BTEMOBILE + // Configs with L1/Riviera Trace and AT-Cmd + {DUMMY_BT_HCI, + UART_MODEM_FAX_DATA, + UART_IRDA_TRACE, + DUMMY_TRACE} // 0x0168 + } + }; + #else /* CHIPSET==15 */ + { + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + UART_IRDA_TRACE, + DUMMY_TRACE}, // 0x0148 + 3, + { + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + UART_IRDA_TRACE, + DUMMY_TRACE},// 0x0148 + {DUMMY_BT_HCI, + DUMMY_FAX_DATA, + DUMMY_TRACE, + UART_IRDA_TRACE}, // 0x1048 + {UART_IRDA_BT_HCI, + DUMMY_FAX_DATA, + DUMMY_TRACE, + DUMMY_TRACE}, // 0x0049 + } + }; + #endif /* CHIPSET !=15*/ + #endif /* (TRACE_TYPE ...) || (OP_L1_STANDALONE == 0) */ + + +#if !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM !=0)) +#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_START + +#if (PSP_STANDALONE == 0) +/* + * HISR stack and semaphore needed by L1 + */ + +#if (OP_L1_STANDALONE == 0) + unsigned char layer_1_sync_stack[LAYER_1_SYNC_STACK_SIZE]; +#else + #if TESTMODE + char FAR layer_1_sync_stack[2600 /*3600*/]; // Frame interrupt task stack for EVA3 + #else + char FAR layer_1_sync_stack[1600 /* 2600 */]; // Frame interrupt task stack for EVA3 + #endif +#endif /* OP_L1_STANDALONE */ + +NU_HISR layer_1_sync_HISR; // Frame interrupt task stack for EVA3 +#endif + +#if (CHIPSET == 12) + + const T_INTH_CONFIG a_inth_config[C_INTH_NB_INTERRUPT] = + { // IRQ/FIQ LEVEL/EDGE PRIORITY HANDLER + { C_INTH_IRQ, C_INTH_EDGE, 0x01, IQ_TimerHandler }, // 0 : WATCHDOG TIMER + { C_INTH_IRQ, C_INTH_EDGE, 0x02, IQ_TimerHandler1 }, // 1 : TIMER 1 + { C_INTH_IRQ, C_INTH_EDGE, 0x02, IQ_TimerHandler2 }, // 2 : TIMER 2 + { C_INTH_FIQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 3 : TSP RECEIVE + { C_INTH_IRQ, C_INTH_EDGE, 0x00, IQ_FrameHandler }, // 4 : TPU FRAME + { C_INTH_IRQ, C_INTH_EDGE, 0x04, f_inth_dummy }, // 5 : TPU PAGE + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 6 : SIM + #else + { C_INTH_IRQ, C_INTH_EDGE, 0x07, SIM_IntHandler }, // 6 : SIM + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, SER_uart_modem_handler }, // 7 : UART_MODEM1 + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, f_inth_dummy }, // 8 : KEYBOARD + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, IQ_KeypadHandler }, // 8 : KEYBOARD + #endif + { C_INTH_IRQ, C_INTH_EDGE, 0x03, IQ_Rtc_Handler }, // 9 : RTC_TIMER + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, IQ_RtcA_Handler }, // 10 : RTC_ALARM + { C_INTH_IRQ, C_INTH_EDGE, 0x00, IQ_Gauging_Handler }, // 11 : ULPD_GAUGING + { C_INTH_IRQ, C_INTH_EDGE, 0x08, IQ_External }, // 12 : ABB_IRQ + { C_INTH_IRQ, C_INTH_EDGE, 0x05, f_inth_dummy }, // 13 : SPI + { C_INTH_IRQ, C_INTH_LEVEL, 0x06, f_dma_interrupt_manager }, // 14 : DMA + { C_INTH_IRQ, C_INTH_EDGE, 0x03, IQ_ApiHandler }, // 15 : API + { C_INTH_IRQ, C_INTH_EDGE, 0x07, f_inth_dummy }, // 16 : GPIO + { C_INTH_FIQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 17 : ABB_FIQ + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, SER_uart_irda_handler }, // 18 : UART_IRDA + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, IQ_GsmTim_Handler }, // 19 : ULPD GSM TIMER + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 20 : GEA +#if GSM_IDLE_RAM_DEBUG + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, flash_access_handler }, // 21 : EXTERNAL IRQ 1 + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, ext_ram_access_handler }, // 22 : EXTERNAL IRQ 2 +#else + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 21 : EXTERNAL IRQ 1 + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 22 : EXTERNAL IRQ 2 +#endif + #if (OP_L1_STANDALONE == 0) + { C_INTH_FIQ, C_INTH_LEVEL, 0x02, bspUicc_Phy_intCHandler }, // 23 : USIM Card Detect + { C_INTH_IRQ, C_INTH_EDGE, 0x02, bspUicc_Phy_intCHandler }, // 24 : USIM + #else + { C_INTH_FIQ, C_INTH_LEVEL, 0x02, f_inth_dummy }, // 23 : USIM Card Detect + { C_INTH_IRQ, C_INTH_EDGE, 0x02, f_inth_dummy }, // 24 : USIM + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 25 : LCD + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 26 : USB + #else + #ifdef RVM_USB_SWE + { C_INTH_IRQ, C_INTH_LEVEL, 0x00, usb_int_handler }, // 26 : USB + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, + #endif + #endif + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 27 : MMC/SD/MS + #else + #ifdef RVM_MC_SWE + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, mc_int_handler }, // 27 : MMC/SD/MS + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, + #endif + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, SER_uart_modem2_handler }, // 28 : UART_MODEM2 + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_2nd_level_handler }, // 29 : 2nd Interrupt Handler + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, f_inth_2nd_level_handler }, // 29 : 2nd Interrupt Handler + #endif + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 30 : I2C + #else + #ifdef RVM_I2C_SWE + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, i2c_hw_int_manager }, // 30 : I2C + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, + #endif + #endif + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 31 : NAND FLASH + #else + #ifdef RVM_NAN_SWE + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, nan_IT_handler }, // 31 : NAND FLASH + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, + #endif + #endif + + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 0 : RNG + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 1 : SHA1/MD5 + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 2 : EMPU + { C_INTH_IRQ, C_INTH_LEVEL, 0x06, f_dma_interrupt_manager }, // 14 : DMA + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy } // 4 : Secure TIMER + }; + +#if (GSM_IDLE_RAM != 0) + const T_INTH_CONFIG a_inth_config_idle_ram[C_INTH_NB_INTERRUPT] = + { // IRQ/FIQ LEVEL/EDGE PRIORITY HANDLER + { C_INTH_IRQ, C_INTH_EDGE, 0x01, ext_ram_irq_inth_handler }, // 0 : WATCHDOG TIMER + { C_INTH_IRQ, C_INTH_EDGE, 0x02, ext_ram_irq_inth_handler }, // 1 : TIMER 1 + { C_INTH_IRQ, C_INTH_EDGE, 0x02, ext_ram_irq_inth_handler }, // 2 : TIMER 2 + { C_INTH_FIQ, C_INTH_EDGE, 0xFF, ext_ram_fiq_inth_handler }, // 3 : TSP RECEIVE + { C_INTH_IRQ, C_INTH_EDGE, 0x00, IQ_FrameHandler }, // 4 : TPU FRAME + { C_INTH_IRQ, C_INTH_EDGE, 0x04, ext_ram_irq_inth_handler }, // 5 : TPU PAGE + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, ext_ram_irq_inth_handler }, // 6 : SIM + #else + { C_INTH_IRQ, C_INTH_EDGE, 0x07, ext_ram_irq_inth_handler }, // 6 : SIM + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, ext_ram_irq_inth_handler }, // 7 : UART_MODEM1 + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, ext_ram_irq_inth_handler }, // 8 : KEYBOARD + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, ext_ram_irq_inth_handler }, // 8 : KEYBOARD + #endif + { C_INTH_IRQ, C_INTH_EDGE, 0x03, ext_ram_irq_inth_handler }, // 9 : RTC_TIMER + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, ext_ram_irq_inth_handler }, // 10 : RTC_ALARM + { C_INTH_IRQ, C_INTH_EDGE, 0x00, IQ_Gauging_Handler }, // 11 : ULPD_GAUGING + { C_INTH_IRQ, C_INTH_EDGE, 0x08, ext_ram_irq_inth_handler }, // 12 : ABB_IRQ + { C_INTH_IRQ, C_INTH_EDGE, 0x05, ext_ram_irq_inth_handler }, // 13 : SPI + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0x06, ext_ram_irq_inth_handler }, // 14 : DMA + #else + { C_INTH_IRQ, C_INTH_EDGE, 0x02, ext_ram_irq_inth_handler }, // 14 : DMA + #endif + { C_INTH_IRQ, C_INTH_EDGE, 0x03, ext_ram_irq_inth_handler }, // 15 : API + { C_INTH_IRQ, C_INTH_EDGE, 0x07, ext_ram_irq_inth_handler }, // 16 : GPIO + { C_INTH_FIQ, C_INTH_EDGE, 0xFF, ext_ram_fiq_inth_handler }, // 17 : ABB_FIQ + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, ext_ram_irq_inth_handler }, // 18 : UART_IRDA + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, IQ_GsmTim_Handler }, // 19 : ULPD GSM TIMER + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 20 : GEA +#if GSM_IDLE_RAM_DEBUG + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, flash_access_handler }, // 21 : EXTERNAL IRQ 1 + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, ext_ram_access_handler }, // 22 : EXTERNAL IRQ 2 +#else + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 21 : EXTERNAL IRQ 1 + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 22 : EXTERNAL IRQ 2 +#endif + { C_INTH_FIQ, C_INTH_LEVEL, 0xFF, ext_ram_fiq_inth_handler }, // 23 : USIM Card Detect + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, ext_ram_irq_inth_handler }, // 24 : USIM + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 25 : LCD + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 26 : USB + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0x00, ext_ram_irq_inth_handler }, // 26 : USB + #endif + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 27 : MMC/SD/MS + #else + #ifdef RVM_MC_SWE + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, ext_ram_irq_inth_handler }, // 27 : MMC/SD/MS + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, ext_ram_irq_inth_handler }, + #endif + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, ext_ram_irq_inth_handler }, // 28 : UART_MODEM2 + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 29 : 2nd Interrupt Handler + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, ext_ram_irq_inth_handler }, // 29 : 2nd Interrupt Handler + #endif + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 30 : I2C + #else + { C_INTH_IRQ, C_INTH_EDGE, 0x01, ext_ram_irq_inth_handler }, // 30 : I2C + #endif + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 31 : NAND FLASH + #else + { C_INTH_IRQ, C_INTH_EDGE, 0x02, ext_ram_irq_inth_handler }, // 31 : NAND FLASH + #endif + + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 0 : RNG + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 1 : SHA1/MD5 + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 2 : EMPU + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler }, // 3 : Secure DMA + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, ext_ram_irq_inth_handler }, // 3 : Secure DMA + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, ext_ram_irq_inth_handler } // 4 : Secure TIMER + }; +#endif //(GSM_IDLE_RAM != 0) + +#endif /* (CHIPSET ==12) */ + +#if (CHIPSET == 15) + const T_INTH_CONFIG a_inth_config[C_INTH_NB_INTERRUPT] = + { // IRQ/FIQ LEVEL/EDGE PRIORITY HANDLER + { C_INTH_IRQ, C_INTH_EDGE, 0x01, IQ_TimerHandler }, // 0 : WATCHDOG TIMER + { C_INTH_IRQ, C_INTH_EDGE, 0x02, IQ_TimerHandler1 }, // 1 : TIMER 1 + { C_INTH_IRQ, C_INTH_EDGE, 0x02, IQ_TimerHandler2 }, // 2 : TIMER 2 + { C_INTH_FIQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 3 : MCSI + #if (PSP_STANDALONE == 0) + { C_INTH_IRQ, C_INTH_EDGE, 0x00, IQ_FrameHandler }, // 4 : TPU FRAME + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 4 : TPU FRAME + #endif + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 5 : TPU PAGE + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 6 : DRP DBB + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 6 : DRP DBB + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, SER_uart_irda_handler }, // 7 : UART_IRDA + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 8 : KEYBOARD + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0x01, IQ_KeypadHandler }, // 8 : KEYBOARD + #endif + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 9 : DRP DBB RX + + #ifdef RVM_CAMD_SWE + + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, f_camera_interrupt_manager }, // 10 : CAMERA + + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 10 : CAMERA + + #endif + + #if (PSP_STANDALONE == 0) + { C_INTH_IRQ, C_INTH_EDGE, 0x00, IQ_Gauging_Handler }, // 11 : ULPD_GAUGING + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 11 : ULPD_GAUGING + #endif + { C_INTH_IRQ, C_INTH_EDGE, 0x08, IQ_External }, // 12 : ABB_IRQ + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 13 : MSSPI + { C_INTH_IRQ, C_INTH_LEVEL, 0x06, f_dma_interrupt_manager }, // 14 : DMA + #if (PSP_STANDALONE == 0) + { C_INTH_IRQ, C_INTH_EDGE, 0x03, IQ_ApiHandler }, // 15 : API + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 15 : API + #endif + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 16 : GPIO + { C_INTH_FIQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 17 : ABB_FIQ + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 18 : DRP DBB RX + #if (PSP_STANDALONE == 0) + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, IQ_GsmTim_Handler }, // 19 : ULPD GSM TIMER + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 19 : ULPD GSM TIMER + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 20 : GEA + #if GSM_IDLE_RAM_DEBUG + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 21 : GPIO1 + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 22 : GPIO2 + #else + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 21 : GPIO1 + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 22 : GPIO2 + #endif + { C_INTH_FIQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 23 : CPORT + #if(OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, // 24 : USIM + #else + { C_INTH_IRQ, C_INTH_EDGE, 0x04, bspUicc_Phy_intCHandler }, // 24 : USIM + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 25 : LCD + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 26 : USB + #else + #ifdef RVM_USB_SWE + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, usb_int_handler }, // 26 : USB + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, + #endif + #endif + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 27 : not used + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, bspI2c_Handeler2 }, // 28 : I2C TRITON + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, f_inth_2nd_level_handler }, // 29 : 2nd Interrupt Handler + { C_INTH_IRQ, C_INTH_LEVEL, 0x03, bspI2c_Handeler1 }, // 30 : I2C + #if (OP_L1_STANDALONE == 1) + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 31 : NAND FLASH + #else + #ifdef RVM_NAN_SWE + { C_INTH_IRQ, C_INTH_LEVEL, 0x02, nan_IT_handler }, // 31 : NAND FLASH + #else + { C_INTH_IRQ, C_INTH_EDGE, 0xFF, f_inth_dummy }, + #endif + #endif + + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 0 : RNG + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 1 : SHA1/MD5 + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy }, // 2 : EMPU + { C_INTH_IRQ, C_INTH_LEVEL, 0x06, f_dma_interrupt_manager }, // 14 : DMA + { C_INTH_IRQ, C_INTH_LEVEL, 0xFF, f_inth_dummy } // 4 : Secure TIMER + }; +#endif /* CHIPSET == 15 */ + +#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_END +#endif // !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM !=0)) + +#if (CHIPSET == 12) + const T_DMA_TYPE_GLOBAL_PARAMETER d_dma_global_parameter= + { + #if (CHIPSET_PG == CP_PG_F751685A) + C_DMA_AUTO_GATE_ON, + #else + C_DMA_AUTO_GATE_OFF, + #endif /* endif (CHIPSET_PG == F751685A) */ + C_DMA_API_PRIO_ARM, + C_DMA_RHEA_PRIO_ARM, + C_DMA_IMIF_PRIO_CPU_4 + }; + +#endif /* (CHIPSET ==12) */ + +#if (CHIPSET == 15) + const T_DMA_TYPE_GLOBAL_PARAMETER d_dma_global_parameter= + { + C_DMA_AUTO_GATE_ON, + C_DMA_API_PRIO_ARM, + C_DMA_RHEA_PRIO_ARM, + C_DMA_IMIF_PRIO_CPU_4, + C_DMA_IPERIF_PRIO_CPU_4, // set same as the IMIF priority. Actual value need to decided + C_DMA_EMIF_DMA_PRIO_7, // Actual value need to be decided + C_DMA_EMIF_MCU_PRIO_5 // Actual value need to be decided + }; + +#endif + + +#if (GSM_IDLE_RAM != 0) + + #define IRQ_STACK_SIZE 128 + #pragma DATA_SECTION(irq_stack,".irqstk"); + UWORD32 irq_stack[IRQ_STACK_SIZE/4]; + const UWORD32 irq_stack_size = IRQ_STACK_SIZE; + + #define FIQ_STACK_SIZE 512 + #pragma DATA_SECTION(fiq_stack,".fiqstk"); + UWORD32 fiq_stack[FIQ_STACK_SIZE/4]; + const UWORD32 fiq_stack_size = FIQ_STACK_SIZE; + + #define SVC_STACK_SIZE 1024 + #pragma DATA_SECTION(svc_stack,".svcstk"); + UWORD32 svc_stack[SVC_STACK_SIZE/4]; + const UWORD32 svc_stack_size = SVC_STACK_SIZE; + + #define TIMER_HISR_STACK_SIZE 1024 + #pragma DATA_SECTION(timer_hisr_stack,".timstk"); + UWORD32 timer_hisr_stack[TIMER_HISR_STACK_SIZE/4]; + const UWORD32 timer_hisr_stack_size = TIMER_HISR_STACK_SIZE; +#endif + +/* HISR_STACK_SHARING: Create global stacks to be used by all HISRs + * having the same priority */ + + + +#if (CODE_VERSION != SIMULATION) +/* + * Init_Target + * + * Performs low-level HW Initialization. + */ +void Init_Target(void) +{ + + + #if (BOARD==70)|| (BOARD==71) + /* Variable for reading the BCR for MCP RAM */ + unsigned short bcrTmpVal; + #endif + (*(volatile Uint16 *) 0xFFFF702A) = 0x0002;//reset the UART module. +#if (CHIPSET == 15) + char detect_code[80]; + typedef void (*pf_t)(UWORD32, UWORD16 *, UWORD16 *); + extern void ffsdrv_device_id_read(UWORD32 base_addr, UWORD16 *manufact, UWORD16 *device); + pf_t myfp; + UWORD16 manufact; + UWORD16 device_id[3]; + +#endif + #if (BOARD == 5) + #define WS_ROM (1) + #define WS_RAM (1) + #define WS_APIF (1) + #define WS_CS2 (7) /* LCD on EVA3. */ + #define WS_CS0 (7) /* DUART on EVA3. UART16750 and latch on A-Sample. */ + #define WS_CS1 (7) /* LCD on A-Sample. */ + + IQ_InitWaitState (WS_ROM, WS_RAM, WS_APIF, WS_CS2, WS_CS0, WS_CS1); + IQ_InitClock (2); /* Internal clock division factor. */ + + IQ_MaskAll (); /* Mask all interrupts. */ + IQ_SetupInterrupts (); /* IRQ priorities. */ + + TM_DisableWatchdog (); + + /* + * Reset all TSP and DBG fdefault values + */ + + AI_ResetTspIO (); + AI_ResetDbgReg (); + AI_ResetIoConfig (); + + /* + * Warning! The external reset signal is connected to the Omega and the + * external device. If the layer 1 is used its initialization removes + * the external reset. If the application does not use the layer 1 + * you must remove the external reset (bit 2 of the reset control + * register 0x505808). + */ + + AI_ResetTspIO(); + AI_ResetDbgReg(); + AI_ResetIoConfig(); + + /* + * Configure all IOs (see RD300 specification). + */ + + AI_ConfigBitAsInput (1); + AI_EnableBit (1); + + AI_ConfigBitAsOutput (2); + AI_EnableBit (2); + + AI_ConfigBitAsInput (11); + AI_EnableBit (11); + + AI_ConfigBitAsOutput (13); + AI_EnableBit (13); + + AI_Power (1); /* Maintain power supply. */ + + #elif (BOARD == 6) || (BOARD == 7) || (BOARD == 8) || (BOARD == 9) || \ + (BOARD == 40) || (BOARD == 41) || (BOARD == 42) || (BOARD == 43) || (BOARD == 45) || \ + (BOARD == 35) || (BOARD == 46) || (BOARD == 70) || (BOARD == 71) + +#if (PSP_STANDALONE == 0) + // RIF/SPI rising edge clock for ULYSSE + //-------------------------------------------------- + #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)|| (ANLG_FAM == 11)) + #if ((CHIPSET >= 3)) + #if (CHIPSET == 12) + F_CONF_RIF_RX_RISING_EDGE; + F_CONF_SPI_RX_RISING_EDGE; + #elif (CHIPSET == 15) + //do the DRP init here for Locosto + #if (L1_DRP == 1) + // drp_power_on(); This should be done after the script is downloaded. + #endif + #else + #if (BOARD==35) + *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x2000; + #else + *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x6000; + #endif /* (BOARD == 35) */ + #endif + #endif + #endif /* ANLG(ANALOG)) */ + + #if (OP_L1_STANDALONE == 1) + #if (BOARD == 40) || (BOARD == 41) || \ + (BOARD == 42) || (BOARD == 43) || (BOARD == 45) + // enable 8 Ohm amplifier for audio on D-sample + AI_ConfigBitAsOutput (1); + AI_SetBit(1); + #elif (BOARD == 70) || (BOARD == 71) + //Locosto I-sample or UPP costo board.BOARD + // Initialize the ARMIO bits as per the I-sample spec + // FIXME + #endif + #endif /* (OP_L1_STANDALONE == 1) */ +#endif /* PSP_STANDALONE ==0 */ + + // Watchdog + //-------------------------------------------------- + TM_DisableWatchdog(); /* Disable Watchdog */ + #if (CHIPSET == 12) || (CHIPSET == 15) + TM_SEC_DisableWatchdog(); + #endif + + #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) || (CHIPSET == 15)) + + #if (CHIPSET == 12) + + #if 0 /* example of configuration for DMA debug */ + #if (BOARD == 6) /* debug on EVA 4 , GPO2 must not be changed */ + + /* TPU_FRAME, NMIIT, IACKn */ + F_DBG_IRQ_CONFIG(C_DBG_IRQ_IRQ4|C_DBG_IRQ_NMIIT|C_DBG_IRQ_IACKN); + + /* NDMA_REQ_VIEW1, NDMA_REQ_VIEW0, DMA_V(1), DMA_S(1), DMAREQ_P1(3:0)*/ + F_DBG_DMA_P1_NDFLASH_CONFIG(C_DBG_DMA_P1_NDFLASH_NDMA_REQ_VIEW_1 | + C_DBG_DMA_P1_NDFLASH_NDMA_REQ_VIEW_0 | + C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_3 | + C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_2 | + C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_1 | + C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_0 | + C_DBG_DMA_P1_NDFLASH_DMA_REQ_S_1 | + C_DBG_DMA_P1_NDFLASH_DMA_REQ_V1 ); + /* DMA_REQ_S(2)*/ + F_DBG_DMA_P2_CONFIG(C_DBG_DMA_P2_DMA_REQ_S2); + + /* DMA_CLK_REQ, BRIDGE_CLK */ + F_DBG_CLK1_CONFIG(C_DBG_CLK1_DMA_CLK_REQ | + C_DBG_CLK1_BRIDGE_CLK ); + + /* XIO_nREADY */ + F_DBG_IMIF_CONFIG(C_DBG_IMIF_XIO_NREADY_MEM); + + /* DSP_nIRQ_VIEW1, DSP_nIRQ_VIEW0, BRIDGE_EN */ + F_DBG_KB_USIM_SHD_CONFIG(C_DBG_KB_USIM_SHD_DSP_NIRQ_VIEW_1 | + C_DBG_KB_USIM_SHD_DSP_NIRQ_VIEW_0 | + C_DBG_KB_USIM_SHD_BRIDGE_EN ); + + /* RHEA_nREADY , RHEA_nSTROBE */ + F_DBG_USIM_CONFIG(C_DBG_USIM_RHEA_NSTROBE | + C_DBG_USIM_RHEA_NREADY ); + + /* XIO_STROBE */ + F_DBG_MISC2_CONFIG(C_DBG_MISC2_X_IOSTRBN); + + /* DMA_CLK_REQ */ + F_DBG_CLK2_CONFIG(C_DBG_CLK2_DMA_CLK_REQ2); + + /* DSP_IRQ_SEL0=DMA, DSP_IRQ_SEL1=DMA, DMA_REQ_SEL0=RIF_RX, DMA_REQ_SEL1=RIF_RX */ + F_DBG_VIEW_CONFIG(0,0,C_DBG_DSP_INT_DMA, + C_DBG_DSP_INT_DMA, + C_DMA_CHANNEL_RIF_RX, + C_DMA_CHANNEL_RIF_RX); + + #endif /* (BOARD == 6) */ + #endif /* DMA debug example */ + #else + /* + * Configure ASIC in order to output the DPLL and ARM clock + */ + // (*( volatile UWORD16* )(0xFFFEF008)) = 0x8000; // DPLL + // (*( volatile UWORD16* )(0xFFFEF00E)) = 0x0004; // ARM clock + // (*( volatile UWORD16* )(0xfffef004)) = 0x0600; // DSP clock + nIACK + #endif /* (CHIPSET == 12) || CHIPSET == 15*/ + + + /* + * Enable/Disable of clock switch off for INTH, TIMER, BRIDGE and DPLL modules + */ + // IRQ, Timer and bridge may SLEEP + // In first step, same configuration as SAMSON + //-------------------------------------------------- + #if (CHIPSET == 12) + CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS | CLKM_BRIDGE_DIS | CLKM_DPLL_DIS); + #elif (CHIPSET == 15) +CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS | CLKM_CPORT_EN | CLKM_BRIDGE_DIS | 0x8000 ); /* CLKM_DPLL_DIS is remove by Ranga*/ + + #else + CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS); + + // Select VTCXO input frequency + //-------------------------------------------------- + CLKM_UNUSED_VTCXO_26MHZ; + + // Rita RF uses 26MHz VCXO + #if (RF_FAM == 12) + CLKM_USE_VTCXO_26MHZ; + #endif + // Renesas RF uses 26MHz on F-sample but 13MHz on TEB + #if (RF_FAM == 43) && (BOARD == 46) + CLKM_USE_VTCXO_26MHZ; + #endif + #endif + + #if (CHIPSET ==15) + //Enable APLL + *((volatile unsigned short *) (C_MAP_CLKM_BASE+0x10)) = 0x01|0x6; + // UART Clock from APLL + *((volatile unsigned short *) CLKM_CNTL_CLK_PROG_FREE_RUNN) = 0x0001; + (*(volatile Uint16 *) 0xFFFF702A) = 0x0002;//reset the UART module. + + #endif + + + + + // + // Control HOM/SAM automatic switching + //-------------------------------------------------- + *((volatile unsigned short *) CLKM_CNTL_CLK) &= ~CLKM_EN_IDLE3_FLG; + + /* + * Disable and Clear all pending interrupts + */ + #if (CHIPSET == 12) || (CHIPSET == 15) + F_INTH_DISABLE_ALL_IT; // MASK all it + F_INTH2_VALID_NEXT(C_INTH_IRQ); // reset current IT in INTH2 IRQ + F_INTH_VALID_NEXT(C_INTH_IRQ); // reset current IT in INTH IRQ + F_INTH_VALID_NEXT(C_INTH_FIQ); // reset current IT in INTH FIQ + F_INTH_RESET_ALL_IT; // reset all IRQ/FIQ source + #else + INTH_DISABLEALLIT; + INTH_RESETALLIT; + INTH_CLEAR; /* reset IRQ/FIQ source */ + #endif + + #if (CHIPSET == 12) + /* API-RHEA control register configuration */ + f_memif_init_api_rhea_ctrl(C_MEMIF_API_RHEA_ADAPT, + C_MEMIF_API_RHEA_ADAPT, + C_MEMIF_API_RHEA_ADAPT, + C_MEMIF_API_RHEA_NO_DEBUG); + + #if ((BOARD == 43) || (BOARD == 45)) + // if Esample,Evaconso active extended page mode + // With Calypso+ chipset, extended page mode can be enabled + // only if W_A_CALYPSO_PLUS_SPR_19599 is set to one in l1_confg.h. + // see L1_MCU-SPR-17515 and L1_MCU-SPR-19599 for more information + f_memif_extended_page_mode_enable(); + #endif + #endif /* (CHIPSET == 12) */ + + #if (CHIPSET == 15) + /* API-RHEA control register configuration */ + f_emif_api_rhea_conf(C_RHEA_STROBE0_ACCESS_SIZE_ADAPT_ENABLE, + C_RHEA_STROBE1_ACCESS_SIZE_ADAPT_ENABLE, + C_API_ACCESS_SIZE_ADAPT_ENABLE, + C_ARM_DEBUG_DISABLE); + #if (BOARD == 70) || (BOARD == 71) + // set the EMIF settings here for locosto + // We could have the default settings here and + // then change it after dynamic clock config + /* MCP RAM Setting Is being done here */ +#if 0 /* This is commented out by Ranga */ + #if (PSP_FAILSAFE!=1) + bcrTmpVal = *((volatile unsigned char *)0x007FFFFFE); + bcrTmpVal +=1; + bcrTmpVal = *((volatile unsigned char *)0x007FFFFFE); + *((volatile unsigned char *)0x007FFFFFE)=0x0001; + *((volatile unsigned char *)0x007FFFFFE)=0x1542; + + /* Setting NOR Flash to these 3 Wait State */ + *((volatile char *)0x06000AAA)=0xAA; + *((volatile char *)0x06000555)=0x55; + *((volatile char *)0x06016AAA)=0xC0; + #endif +#endif + #endif + #endif /* (CHIPSET == 15) */ + + + /* + * Initialize current DSP clock to 0 in order to pass through + * the right DSP latency configuration (increase DSP clock) + * in f_dynamic_clock_cfg(). + * Obviously, the real DSP clock is not 0kHz. + * d_dsp_cur_clk will be updated after clock configuration in f_dynamic_clock_cfg(). + */ + d_dsp_cur_clk = 0; // Used to keep track of current DSP clock. + + /* Dynamic clock configuration */ + f_dynamic_clock_cfg(C_CLOCK_CFG_DEFAULT); + + // Write_en_0 = 0 , Write_en_1 = 0 + RHEA_INITARM(0,0); + + #if (CHIPSET ==15) + // Mark USB on 52 MHZ Clock + *((volatile unsigned short *) (CLKM_CNTL_CLK_USB)) = 0x02; + #endif + + #if (CHIPSET == 12) || ((CHIPSET == 10) && (OP_WCP == 1)) + /* Allocate the 0.5 Mbits Shared RAM to the DSP */ + f_memif_shared_sram_allocation(C_MEMIF_DSPMS_0_5MBITS_TO_DSP); + #endif + + // INTH + //-------------------------------------------------- + #if (CHIPSET == 12) || (CHIPSET == 15) + #if (GSM_IDLE_RAM != 0) + f_inth_setup((T_INTH_CONFIG *)a_inth_config_idle_ram); // setup configuration IT handlers + #else + f_inth_setup((T_INTH_CONFIG *)a_inth_config); // setup configuration IT handlers + #endif + #else + IQ_SetupInterrupts(); + #endif + + + #if (CHIPSET == 12) || (CHIPSET == 15) + #if (OP_L1_STANDALONE == 0) + + f_dma_global_parameter_set((T_DMA_TYPE_GLOBAL_PARAMETER *)&d_dma_global_parameter); + #endif + f_dma_channel_allocation_set(C_DMA_CHANNEL_0, C_DMA_CHANNEL_DSP); + #if (OP_L1_STANDALONE == 1) + f_dma_global_parameter_set((T_DMA_TYPE_GLOBAL_PARAMETER *)&d_dma_global_parameter); + f_dma_channel_allocation_set(C_DMA_CHANNEL_0, C_DMA_CHANNEL_DSP); + #endif + + #else + // DMA + //-------------------------------------------------- + // channel0 = Arm, channel1 = Lead, channel2 = forced to Arm, channel3=forced to Arm, dma_burst = 0001, priority = same + #if (OP_L1_STANDALONE == 0) + DMA_ALLOCDMA(1,0,1,1); // Channel 1 used by DSP with RIF RX + #endif + #endif + + /* CHIPSET = 4 or 7 or 8 or 10 or 11 or 12 */ + + #else + + // RHEA Bridge + //-------------------------------------------------- + // ACCES_FAC_0 = 0, ACCES_FAC_1 = 0 ,TIMEOUT = 0x7F + RHEA_INITRHEA(0,0,0x7F); + + #if (CHIPSET == 6) + // WS_H = 1 , WS_L = 15 + RHEA_INITAPI(1,15); // should be 0x01E1 for 65 Mhz + #else + // WS_H = 0 , WS_L = 7 + RHEA_INITAPI(0,7); // should be 0x0101 for 65 Mhz + #endif + + // Write_en_0 = 0 , Write_en_1 = 0 + RHEA_INITARM(0,0); + + // INTH + //-------------------------------------------------- + INTH_DISABLEALLIT; // MASK all it + INTH_CLEAR; // reset IRQ/FIQ source + IQ_SetupInterrupts(); + + // DMA + //-------------------------------------------------- + // channel0 = Arm, channel1 = Lead, dma_burst = 0001, priority = same + DMA_ALLOCDMA(1,0,1,1); // should be 0x25 (channel 1 = lead) + + #if (CHIPSET == 6) + // Memory WS configuration for ULYSS/G1 (26 Mhz) board + //----------------------------------------------------- + MEM_INIT_CS2(2,MEM_DVS_16,MEM_WRITE_EN,0); + #endif + + // CLKM + //-------------------------------------------------- + CLKM_InitARMClock(0x00, 2); /* no low freq, no ext clock, div by 1 */ + + #if (CHIPSET == 6) + CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS | CLKM_VTCXO_26); + #else + CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS); + #endif + + #endif /* CHIPSET = 4 or 7 or 8 or 10 or 11 or 12 */ + + // Freeze ULPD timer .... + //-------------------------------------------------- + *((volatile SYS_UWORD16 *) ULDP_GSM_TIMER_INIT_REG ) = 0; + *((volatile SYS_UWORD16 *) ULDP_GSM_TIMER_CTRL_REG ) = TPU_FREEZE; + + // reset INC_SIXTEEN and INC_FRAC + //-------------------------------------------------- + #if (OP_L1_STANDALONE == 1) + l1ctl_pgm_clk32(DEFAULT_HFMHZ_VALUE,DEFAULT_32KHZ_VALUE); + #else + ULDP_INCSIXTEEN_UPDATE(132); //32768.29038 =>132, 32500 => 133 + // 26000 --> 166 + ULDP_INCFRAC_UPDATE(15840); //32768.29038 =>15840, 32500 => 21845 + // 26000 --> 43691 + #endif /* OP_L1_STANDALONE */ + + // program ULPD WAKE-UP .... + //================================================= + #if (CHIPSET == 2) + *((volatile SYS_UWORD16 *)ULDP_SETUP_FRAME_REG) = SETUP_FRAME; // 2 frame + *((volatile SYS_UWORD16 *)ULDP_SETUP_VTCXO_REG) = SETUP_VTCXO; // 31 periods + *((volatile SYS_UWORD16 *)ULDP_SETUP_SLICER_REG) = SETUP_SLICER; // 31 periods + *((volatile SYS_UWORD16 *)ULDP_SETUP_CLK13_REG) = SETUP_CLK13; // 31 periods + #else + *((volatile SYS_UWORD16 *)ULDP_SETUP_FRAME_REG) = SETUP_FRAME; // 3 frames + *((volatile SYS_UWORD16 *)ULDP_SETUP_VTCXO_REG) = SETUP_VTCXO; // 0 periods + *((volatile SYS_UWORD16 *)ULDP_SETUP_SLICER_REG) = SETUP_SLICER; // 31 periods + *((volatile SYS_UWORD16 *)ULDP_SETUP_CLK13_REG) = SETUP_CLK13; // 31 periods + *((volatile SYS_UWORD16 *)ULPD_SETUP_RF_REG) = SETUP_RF; // 31 periods + #endif + + #if (CHIPSET == 15) + *((volatile SYS_UWORD16 *)ULPD_DCXO_SETUP_SLEEPN) = SETUP_SLEEPZ; // 0 + *((volatile SYS_UWORD16 *)ULPD_DCXO_SETUP_SYSCLKEN) = SETUP_SYSCLKEN; // 255 clocks of 32 KHz for 7.8 ms DCXO delay for Locosto + *((volatile SYS_UWORD16 *)0xFFFEF192) = 0x1; //CLRZ + *((volatile SYS_UWORD16 *)0xFFFEF190) = 0x2; //SLPZ + *((volatile SYS_UWORD16 *)0xFFFEF18E)= 0x2; //SYSCLKEN + *((volatile SYS_UWORD16 *)0xFFFEF186) = 0x2; //CLK13_EN + *((volatile SYS_UWORD16 *)0xFFFEF18A) = 0x2; //DRP_DBB_SYSCLK + + + + + #endif + + // Set Gauging versus HF (PLL) + //================================================= + ULDP_GAUGING_SET_HF; // Enable gauging versus HF + ULDP_GAUGING_HF_PLL; // Gauging versus PLL + + // current supply for quartz oscillation + //================================================= + #if (OP_L1_STANDALONE == 1) + #if ((CHIPSET != 9) && (CHIPSET != 12) && (CHIPSET !=15)) // programming model changed for Ulysse C035, stay with default value + *(volatile SYS_UWORD16 *)QUARTZ_REG = 0x27; + #endif + #else + #if ((BOARD == 6) || (BOARD == 8) || (BOARD == 9) || (BOARD == 35) || (BOARD == 40) || (BOARD == 41)) + *((volatile SYS_UWORD16 *)QUARTZ_REG) = 0x27; + #elif (BOARD == 7) + *((volatile SYS_UWORD16 *)QUARTZ_REG) = 0x24; + #endif + #endif /* OP_L1_STANDALONE */ + + // stop Gauging if any (debug purpose ...) + //-------------------------------------------------- + if ( *((volatile SYS_UWORD16 *) ULDP_GAUGING_CTRL_REG) & ULDP_GAUGING_EN) + { + volatile UWORD32 j; + ULDP_GAUGING_STOP; /* Stop the gauging */ + /* wait for gauging it*/ + // one 32khz period = 401 periods of 13Mhz + for (j=1; j<50; j++); + while (! (* (volatile SYS_UWORD16 *) ULDP_GAUGING_STATUS_REG) & ULDP_IT_GAUGING); + } + + #if (OP_L1_STANDALONE == 0) + AI_ClockEnable (); + + #if (BOARD == 7) + // IOs configuration of the B-Sample in order to optimize the power consumption + AI_InitIOConfig(); + + // Set LPG instead of DSR_MODEM + *((volatile SYS_UWORD16 *) ASIC_CONF) |= 0x40; + // Reset the PERM_ON bit of LCR_REG + *((volatile SYS_UWORD16 *) MEM_LPG) &= ~(0x80); + #elif ((BOARD == 8) || (BOARD == 9)) + // IOs configuration of the C-Sample in order to optimize the power consumption + AI_InitIOConfig(); + + // set the debug latch to 0x00. + *((volatile SYS_UWORD8 *) 0x2800000) = 0x00; + #elif ((BOARD == 35) || (BOARD == 46)) + AI_InitIOConfig(); + // CSMI INTERFACE + // Initialize CSMI clients for GSM control + // and Fax/Data services + CSMI_Init(); + GC_Initialize(); // GSM control initialization + CU_Initialize(); // Trace initialization + CF_Initialize(); // Fax/Data pre-initialization + #elif ((BOARD == 40) || (BOARD == 41)) + // IOs configuration of the D-Sample in order to optimize the power consumption + AI_InitIOConfig(); + + #ifdef BTEMOBILE + // Reset BT chip by toggling the Island's nRESET_OUT signal + *((volatile SYS_UWORD16 *) 0xFFFFFD04) |= 0x04; + *((volatile SYS_UWORD16 *) 0xFFFFFD04) &= ~(0x4); + #endif + + // set the debug latch to 0x0000. + *((volatile SYS_UWORD16 *) 0x2700000) = 0x0000; + #elif ((BOARD == 70) || (BOARD == 71)) + AI_InitIOConfig(); + /* Mark The System configuration According to I-Sample */ + /* Adding GPIO Mux Setting Here */ + pin_configuration_all(); // Init Tuned for Power Management + /* A22 is Enabled in int.s hence not Here */ + /* FIXME: PULL_UP Enable and PULL UP Values Need to revisited */ + + /* Add code to find out the manufacture id of NOR flash*/ + + // Copy ffsdrv_device_id_read() function code to RAM. The only known + // way to determine the size of the code is to look either in the + // linker-generated map file or in the assember output file. + ffsdrv_copy_code_to_ram((UWORD16 *) detect_code, + (UWORD16 *) &ffsdrv_device_id_read, + sizeof(detect_code)); + + // Combine bit 0 of the thumb mode function pointer with the address + // of the code in RAM. Then call the detect function in RAM. + myfp = (pf_t) (((int) &ffsdrv_device_id_read & 1) | (int) detect_code); + (*myfp)(0x06000000, &manufact, device_id); + + enable_ps_ram_burst(); + + if( 0x7e == device_id[0] ) + { + enable_flash_burst(); + flash_device_id = 0x7E; + } + else + { + enable_flash_burst_mirror(); + flash_device_id = 0; + } + + + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + +#if 0 // Init Changed for tuning to Power Management -Old Init Commented + /* Ball N9 Mapped to TSPACT_8 (TPU) */ + F_IO_CONFIG(C_CONF_GPIO_5,C_CONF_PUPD_EN|0x01); + /* Ball A6 ND_WE */ + F_IO_CONFIG(C_CONF_GPIO_18,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* Ball C2 ND_RDY */ + F_IO_CONFIG(C_CONF_GPIO_34,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* Ball C3 ND_RE */ + F_IO_CONFIG(C_CONF_GPIO_31,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL E5 CAM_D_4 */ + F_IO_CONFIG(C_CONF_ND_NWP,0x02); + /* BALL F6 ND_CLE */ + F_IO_CONFIG(C_CONF_GPIO_32,C_CONF_PUPD_EN|0x01); + /* BALL H8 ND_ALE */ + F_IO_CONFIG(C_CONF_GPIO_33,C_CONF_PUPD_EN|0x01); + /* BALL E10 LCD_NCS0 */ + F_IO_CONFIG(C_CONF_GPIO_13,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL C11 GPIO_10 */ + F_IO_CONFIG(C_CONF_GPIO_10,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL D10 GPIO_11 */ + F_IO_CONFIG(C_CONF_GPIO_11,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL M6 CAM_D_1 */ + F_IO_CONFIG(C_CONF_GPIO_0,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x02); + /* BALL N5 CAM_D_0 */ + F_IO_CONFIG(C_CONF_GPIO_47,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x02); + /* BALL A5 CAM_LCLK */ + F_IO_CONFIG(C_CONF_GPIO_21,0x01); + /* BALL C6 CAM_XCLK */ + F_IO_CONFIG(C_CONF_GPIO_22,0x01); + /* BALL E7 CAM_VS */ + F_IO_CONFIG(C_CONF_GPIO_20,0x01); + /* BALL F8 CAM_HS */ + F_IO_CONFIG(C_CONF_GPIO_19,0x01); + /* BALL K7 MCSI_TX */ + F_IO_CONFIG(C_CONF_GPIO_45,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL M5 MCSI_FS */ + F_IO_CONFIG(C_CONF_GPIO_44,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL N3 MCSI_CK */ + F_IO_CONFIG(C_CONF_GPIO_43,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL P2 MCSI_RX */ + F_IO_CONFIG(C_CONF_GPIO_46,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL B11 TSPACT_10 */ + F_IO_CONFIG(C_CONF_GPIO_12,C_CONF_PUPD_EN|0x01); + /* BALL B3 CAM_D_5 */ + F_IO_CONFIG(C_CONF_GPIO_30,C_CONF_PUPD_EN|0x03); + /* BALL C4 CAM_D_7 */ + F_IO_CONFIG(C_CONF_GPIO_28,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x03); + /* BALL C5 SPI_DATA_MOSI */ + F_IO_CONFIG(C_CONF_GPIO_25,C_CONF_PUPD_EN|0x01); + /* BALL E6 SPI_NCS0 */ + F_IO_CONFIG(C_CONF_GPIO_26,C_CONF_PUPD_EN|0x01); + /* BALL F7 SPI_DATA_MIS0 */ + F_IO_CONFIG(C_CONF_GPIO_24,C_CONF_PUPD_EN|0x03); + /* BALL G6 CAM_D_2 */ + F_IO_CONFIG(C_CONF_GPIO_7,C_CONF_PUPD_EN|0x05); + /* BALL G7 CAM_D_6 */ + F_IO_CONFIG(C_CONF_GPIO_29,C_CONF_PUPD_EN|0x03); + /* BALL G8 SPI_NCS1 */ + F_IO_CONFIG(C_CONF_GPIO_27,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + /* BALL G9 SPI_CLK */ + F_IO_CONFIG(C_CONF_GPIO_23,C_CONF_PUPD_EN|0x01); + /* BALL L6 CKM */ + F_IO_CONFIG(C_CONF_GPIO_42,C_CONF_PUPD_VAL|C_CONF_PUPD_EN|0x01); + + /*By default the muxed bus is given to LCD*/ + C_CONF_LCD_CAM_NAN_REG=0x03; + +#endif // for #if 0 Init Changed for Power Management + #endif // BOARD + + // Enable HW Timers 1 & 2 + TM_EnableTimer (1); + TM_EnableTimer (2); + + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + asm(" NOP"); + #endif /* (OP_L1_STANDALONE == 0) */ + + #endif /* #if (BOARD == 5) */ +#if(OP_L1_STANDALONE == 1 && MIRROR_BIT == 1 ) //temp FIX for L1 standalone-this fix will work only for I-sample mirror bit +//#if(OP_L1_STANDALONE == 1 ) + //AI_InitIOConfig(); + //pin_configuration_all(); // Init Tuned for Power Management + //enable_ps_ram_burst(); + //enable_flash_burst_mirror(); + flash_device_id = 0; + //asm(" NOP"); + //asm(" NOP"); + //asm(" NOP"); + //asm(" NOP"); + //asm(" NOP"); + //asm(" NOP"); + //asm(" NOP"); + //asm(" NOP"); +#elif(OP_L1_STANDALONE == 1 && MIRROR_BIT == 0 ) + flash_device_id = 0x7E; +#endif + + + #if GSM_IDLE_RAM_DEBUG + #if (CHIPSET!=15) + *((volatile SYS_UWORD16 *) 0xFFFE4806) = (0x0020); + AI_ConfigBitAsOutput(3); + AI_ConfigBitAsOutput(2); + #endif + #endif + #if (CHIPSET==15) + { + volatile unsigned int * configReg=(volatile unsigned int *)0xFFFEF01C; + *configReg &= 0xF7FF; + } + #endif + +} + +//--> Init Added for Power Management +/******************************************************* + Configure ALL I/O pins +*******************************************************/ +void pin_configuration_all(void) +{ + pin_configuration_bluetooth(); + pin_configuration_emifs(); + pin_configuration_system(); + pin_configuration_lcd_nand(0); + pin_configuration_keypad(); + pin_configuration_sim(); + pin_configuration_radio(); + pin_configuration_usb(); + pin_configuration_camera_irda(1); +} + +/******************************************************* + Configure Bluetooth I/O pins +*******************************************************/ +void pin_configuration_bluetooth(void) +{ + GPIO_DIRECTION_OUT(37); GPIO_CLEAR_OUTPUT(37); // BT_nSHUTDOWN + CONF_GPIO_43 = MUX_CFG(1, PULLOFF); // MCSI_CK + CONF_GPIO_44 = MUX_CFG(1, PULLOFF); // MCSI_FS + CONF_GPIO_45 = MUX_CFG(1, PULLOFF); // MCSI_TX + CONF_GPIO_46 = MUX_CFG(1, PULLOFF); // MCSI_RX + CONF_UART_CTS = MUX_CFG(0, PULLOFF); // CTS + CONF_UART_RX = MUX_CFG(0, PULLOFF); // RX + CONF_UART_TX = MUX_CFG(0, PULLOFF); // TX + CONF_GPIO_37 = MUX_CFG(0, PULLOFF); // BT_SHUTDOWN +} + +/******************************************************* + Configure EMIFS I/O pins +*******************************************************/ +void pin_configuration_emifs(void) +{ + CONF_ADD_21 = MUX_CFG(0, PULLOFF); // ADD21 + CONF_GPIO_39 = MUX_CFG(1, PULLOFF); // ADD22 + CONF_GPIO_38 = MUX_CFG(0, PULLOFF); // nCS0 + CONF_NCS3 = MUX_CFG(0, PULLOFF); // nCS3 + CONF_ADV = MUX_CFG(0, PULLOFF); // ADV + CONF_NMOE = MUX_CFG(0, PULLOFF); // nMOE + CONF_RNW = MUX_CFG(0, PULLOFF); // RnW + CONF_GPIO_42 = MUX_CFG(1, PULLOFF); // CKM + CONF_NRDY = MUX_CFG(0, PULLUP); // nRDYMEM +} + +/******************************************************* + Configure system I/O pins +*******************************************************/ +void pin_configuration_system(void) +{ + GPIO_DIRECTION_IN(1); // GPIO_1 + GPIO_DIRECTION_OUT(2); GPIO_CLEAR_OUTPUT(2); // SYS_RESET + GPIO_DIRECTION_IN(10); // Not used (nEMU0) + CONF_CK13MHZ_EN = MUX_CFG(0, PULLOFF); // CK13MHZ_EN + CONF_ABB_IRQ = MUX_CFG(0, PULLUP); // ABB_IRQ + CONF_GPIO_5 = MUX_CFG(1, PULLOFF); // STARTADC + CONF_CDO = MUX_CFG(0, PULLOFF); // CDO (I2S) + CONF_CSCLK = MUX_CFG(0, PULLOFF); // CSCLK (I2S) + CONF_CSYNC = MUX_CFG(0, PULLOFF); // CSYNC (I2S) + CONF_NBSCAN = MUX_CFG(0, PULLUP); // nBSCAN + CONF_SPARE_3 = MUX_CFG(0, PULLUP); // Spare3 + CONF_TDO = MUX_CFG(0, PULLOFF); // TDO + +// JTAG pulls are disabled on I-Sample due to external buffers. +// CONF_TCK = MUX_CFG(0, PULLDOWN); // TCK +// CONF_TDI = MUX_CFG(0, PULLUP); // TDI +// CONF_TMS = MUX_CFG(0, PULLUP); // TMS +// CONF_TRST = MUX_CFG(0, PULLUP); // TRST + CONF_TCK = MUX_CFG(0, PULLOFF); // TCK + CONF_TDI = MUX_CFG(0, PULLOFF); // TDI + CONF_TMS = MUX_CFG(0, PULLOFF); // TMS + CONF_TRST = MUX_CFG(0, PULLOFF); // TRST + + CONF_VDR = MUX_CFG(0, PULLOFF); // VDR + CONF_VFSRX = MUX_CFG(0, PULLDOWN); // VFSRX + CONF_GPIO_1 = MUX_CFG(0, PULLUP); // Not used GPIO + CONF_GPIO_2 = MUX_CFG(0, PULLOFF); // SYS_RESET + CONF_GPIO_10 = MUX_CFG(1, PULLUP); // Not used (NEMU0) + CONF_GPIO_12 = MUX_CFG(2, PULLOFF); // TSPACT10 +} + +/******************************************************* + Configure LCD and NAND Flash I/O pins + Mode = 0 : LCD functional. NAND not functional + Mode = 1 : NAND functional. LCD not functional +*******************************************************/ +void pin_configuration_lcd_nand(int mode) +{ + CONF_ND_CE1 = MUX_CFG(0, PULLOFF); + CONF_GPIO_18 = MUX_CFG(1, PULLOFF); // ND_WE + CONF_GPIO_31 = MUX_CFG(1, PULLOFF); // ND_RE + CONF_GPIO_32 = MUX_CFG(1, PULLOFF); // ND_CLE + CONF_GPIO_33 = MUX_CFG(1, PULLOFF); // ND_ALE + CONF_GPIO_34 = MUX_CFG(1, PULLUP); // ND_RDY + CONF_LCD_NRST = MUX_CFG(0, PULLOFF); + CONF_LCD_RNW = MUX_CFG(0, PULLOFF); + CONF_LCD_RS = MUX_CFG(0, PULLOFF); + CONF_LCD_STB = MUX_CFG(0, PULLOFF); + CONF_GPIO_13 = MUX_CFG(1, PULLOFF); // LCD_NCS0 + switch(mode) + { + case 0: // LCD + CONF_LCD_DATA_0 = MUX_CFG(0, PULLOFF); + CONF_LCD_DATA_1 = MUX_CFG(0, PULLOFF); + CONF_LCD_DATA_2 = MUX_CFG(0, PULLOFF); + CONF_LCD_DATA_3 = MUX_CFG(0, PULLOFF); + CONF_LCD_DATA_4 = MUX_CFG(0, PULLOFF); + CONF_LCD_DATA_5 = MUX_CFG(0, PULLOFF); + CONF_LCD_DATA_6 = MUX_CFG(0, PULLOFF); + CONF_LCD_DATA_7 = MUX_CFG(0, PULLOFF); + break; + case 1: // NAND + CONF_LCD_DATA_0 = MUX_CFG(3, PULLOFF); + CONF_LCD_DATA_1 = MUX_CFG(3, PULLOFF); + CONF_LCD_DATA_2 = MUX_CFG(3, PULLOFF); + CONF_LCD_DATA_3 = MUX_CFG(3, PULLOFF); + CONF_LCD_DATA_4 = MUX_CFG(3, PULLOFF); + CONF_LCD_DATA_5 = MUX_CFG(3, PULLOFF); + CONF_LCD_DATA_6 = MUX_CFG(3, PULLOFF); + CONF_LCD_DATA_7 = MUX_CFG(3, PULLOFF); + break; + } +} + +/******************************************************* + Configure keypad pins +*******************************************************/ +void pin_configuration_keypad(void) +{ + CONF_GPIO_8 = MUX_CFG(0, PULLUP); // KBR4 + CONF_GPIO_9 = MUX_CFG(0, PULLOFF); // KBC4 + CONF_KBC_0 = MUX_CFG(0, PULLOFF); + CONF_KBC_1 = MUX_CFG(0, PULLOFF); + CONF_KBC_2 = MUX_CFG(0, PULLOFF); + CONF_KBC_3 = MUX_CFG(0, PULLOFF); + CONF_KBR_0 = MUX_CFG(0, PULLUP); + CONF_KBR_1 = MUX_CFG(0, PULLUP); + CONF_KBR_2 = MUX_CFG(0, PULLUP); + CONF_KBR_3 = MUX_CFG(0, PULLUP); +} + +/******************************************************* + Configure SIM I/O pins +*******************************************************/ +void pin_configuration_sim(void) +{ + CONF_SIM_CLK = MUX_CFG(0, PULLOFF); + CONF_SIM_IO = MUX_CFG(0, PULLOFF); + CONF_SIM_PWCTRL = MUX_CFG(0, PULLOFF); + CONF_SIM_RST = MUX_CFG(0, PULLOFF); +} + +/******************************************************* + Configure radio I/O pins +*******************************************************/ +void pin_configuration_radio(void) +{ + CONF_TSPACT_11 = MUX_CFG(0, PULLOFF); + CONF_TSPACT_12 = MUX_CFG(0, PULLOFF); + CONF_TSPACT_13 = MUX_CFG(0, PULLOFF); + CONF_TSPACT_14 = MUX_CFG(0, PULLOFF); + CONF_TSPACT_15 = MUX_CFG(0, PULLOFF); +} + +/******************************************************* + Configure USB I/O pins +*******************************************************/ +void pin_configuration_usb(void) +{ + CONF_USB_BOOT = MUX_CFG(0, PULLOFF); + CONF_USB_DAT = MUX_CFG(0, PULLDOWN); + CONF_USB_RCV = MUX_CFG(0, PULLDOWN); + //CONF_USB_SE0 = MUX_CFG(0, PULLUP); // to reduce 130 uA + CONF_USB_SE0 = MUX_CFG(0, PULLOFF); // to reduce 130 uA + CONF_USB_TXEN = MUX_CFG(0, PULLOFF); +} + +/******************************************************* + Configure Camera and IrDA I/O pins + Mode = 0 : IrDA functional. Camera not functional + Mode = 1 : Camera functional. IrDA not functional + Use mode 1 ONLY when camera is active i.e. use + mode 0 during sleep +*******************************************************/ +void pin_configuration_camera_irda(int mode) +{ + GPIO_DIRECTION_OUT(17); GPIO_SET_OUTPUT(17); // CAM_PWDN + GPIO_DIRECTION_OUT(11); GPIO_SET_OUTPUT(11); // Golden eye sleep + GPIO_DIRECTION_OUT(35); GPIO_CLEAR_OUTPUT(35); // LED_TRCH + GPIO_DIRECTION_OUT(4); GPIO_SET_OUTPUT(4); // nCAM_RST + GPIO_DIRECTION_OUT(20); GPIO_CLEAR_OUTPUT(20); // CAM_D_3 + GPIO_DIRECTION_OUT(19); GPIO_CLEAR_OUTPUT(19); // CAM_HS + GPIO_DIRECTION_OUT(21); GPIO_CLEAR_OUTPUT(21); // CAM_LCLK + GPIO_DIRECTION_OUT(36); GPIO_SET_OUTPUT(36); // IrDA_SD + CONF_GPIO_36 = MUX_CFG(0, PULLOFF); // IRDA_SD + CONF_GPIO_11 = MUX_CFG(1, PULLOFF); // Golden eye sleep (NEMU1) + CONF_GPIO_4 = MUX_CFG(0, PULLOFF); // CAM_RESET + CONF_GPIO_35 = MUX_CFG(0, PULLOFF); // LED_TORCH + CONF_GPIO_17 = MUX_CFG(0, PULLOFF); // CAM_PWDN + CONF_GPIO_23 = MUX_CFG(1, PULLDOWN); // SPI_CLK + CONF_GPIO_24 = MUX_CFG(1, PULLDOWN); // SPI_DATA_MISO + CONF_GPIO_25 = MUX_CFG(1, PULLDOWN); // SPI_DATA_MOSI + CONF_GPIO_26 = MUX_CFG(1, PULLUP); // SPI_NCS0 + CONF_GPIO_27 = MUX_CFG(1, PULLUP); // SPI_NCS1 + CONF_GPIO_22 = MUX_CFG(1, PULLOFF); // CAM_XCLK + switch(mode) + { + case 0: // IrDA or sleep + CONF_GPIO_47 = MUX_CFG(1, PULLUP); // IrDA RXIR + CONF_GPIO_0 = MUX_CFG(1, PULLOFF); // IrDA TXIR + CONF_GPIO_7 = MUX_CFG(5, PULLDOWN); // CAM_D_2 + CONF_GPIO_20 = MUX_CFG(0, PULLOFF); // CAM_D_3 = GPIO + CONF_ND_NWP = MUX_CFG(0, PULLOFF); // CAM_D_4 = ND_NWP + CONF_GPIO_30 = MUX_CFG(3, PULLDOWN); // CAM_D_5 + CONF_GPIO_29 = MUX_CFG(3, PULLDOWN); // CAM_D_6 + CONF_GPIO_28 = MUX_CFG(3, PULLUP); // CAM_D_7 + CONF_GPIO_19 = MUX_CFG(0, PULLOFF); // CAM_HS = GPIO + CONF_GPIO_21 = MUX_CFG(0, PULLOFF); // CAM_LCLK = GPIO + break; + case 1: // Camera + CONF_GPIO_47 = MUX_CFG(2, PULLOFF); // CAM_D_0 + IrDA + CONF_GPIO_0 = MUX_CFG(2, PULLOFF); // CAM_D_1 + IrDA + CONF_GPIO_7 = MUX_CFG(5, PULLOFF); // CAM_D_2 + CONF_GPIO_20 = MUX_CFG(2, PULLOFF); // CAM_D_3 + CONF_ND_NWP = MUX_CFG(2, PULLOFF); // CAM_D_4 + CONF_GPIO_30 = MUX_CFG(3, PULLOFF); // CAM_D_5 + CONF_GPIO_29 = MUX_CFG(3, PULLOFF); // CAM_D_6 + CONF_GPIO_28 = MUX_CFG(3, PULLOFF); // CAM_D_7 + CONF_GPIO_19 = MUX_CFG(1, PULLOFF); // CAM_HS + CONF_GPIO_21 = MUX_CFG(1, PULLOFF); // CAM_LCLK + break; + } +} + +//<-- Init Added for Power Management + +/* + * Init_Drivers + * + * Performs Drivers Initialization. + */ +void Set_Switch_ON_Cause(void); +void Init_Drivers(void) +{ + +#if (CHIPSET==15) + bspI2c_init(); + bspTwl3029_init(); + + #if (OP_L1_STANDALONE == 0) + Set_Switch_ON_Cause(); + #endif + + + /* Turn on DRP We will make VRMCC to device group Modem + * And Switch it on. + */ + bspTwl3029_Power_setDevGrp(NULL,BSP_TWL3029_POWER_VRMMC,BSP_TWL3029_POWER_DEV_GRP_MODEM); + wait_ARM_cycles(convert_nanosec_to_cycles(100000*2)); + bspTwl3029_Power_enable(NULL,BSP_TWL3029_POWER_VRMMC,BSP_TWL3029_POWER_STATE_ACTIVE); +#endif + +#if (CHIPSET!=15) + #if ABB_SEMAPHORE_PROTECTION + // Create the ABB semaphore + ABB_Sem_Create(); + #endif // SEMAPHORE_PROTECTION +#endif + + #if (OP_L1_STANDALONE == 0) + /* + * Initialize FFS invoking restore procedure by MPU-S + */ + #if ((BOARD == 35) || (BOARD == 46)) + GC_FfsRestore(); + #endif + + /* + * FFS main initialization. + */ + + ffs_main_init(); + + + /* + * Initialize Riviera manager and create tasks thanks to it. + */ +#if (CHIPSET!=15) || (REMU==0) + rvf_init(); + rvm_init(); /* A-M-E-M-D-E-D! */ + create_tasks(); +#endif + /* + * SIM Main Initialization. + */ + #if (CHIPSET!=15) + SIM_Initialize (); + #else + bspUicc_bootInit(); + #endif + #endif +} + +#if (PSP_STANDALONE == 0) +/* + * l1_create_HISR + * + * Create L1 HISR. + */ +void l1_create_HISR (void) +{ + STATUS status; + + #if (OP_L1_STANDALONE == 0) + // Fill the entire stack with the pattern 0xFE + memset (layer_1_sync_stack, 0xFE, LAYER_1_SYNC_STACK_SIZE); + #endif + + status = NU_Create_HISR (&layer_1_sync_HISR, + "L1_HISR", + layer_1_sync_HISR_entry, + #if (OP_L1_STANDALONE == 0) + 1, + layer_1_sync_stack, + LAYER_1_SYNC_STACK_SIZE); + #else + 1, + layer_1_sync_stack, + sizeof(layer_1_sync_stack)); + #endif + + #if (L1_EXT_AUDIO_MGT) + // Create HISR for Ext MIDI activity + //================================== + status += NU_Create_HISR(&EXT_AUDIO_MGT_hisr, + "H_EXT_AUDIO_MGT", + Cust_ext_audio_mgt_hisr, + 2, + ext_audio_mgt_hisr_stack, + sizeof(ext_audio_mgt_hisr_stack)); + #endif + + #if ( (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) ) // equivalent to an API_HISR flag + status += NU_Create_HISR(&apiHISR, + "API_HISR", + api_hisr, + 2, + API_HISR_stack, + sizeof(API_HISR_stack)); + #endif // (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) + + #if (FF_L1_IT_DSP_USF == 1) || (FF_L1_IT_DSP_DTX == 1) // equivalent to an API_MODEM_HISR flag + // Create HISR for USF DSP interrupt !!!!. This HISR needs + // to have the highest priority since the USF status needs + // to be known before the next block starts. + //======================================================== + status += NU_Create_HISR(&api_modemHISR, + "MODEM", + api_modem_hisr, + 1, + API_MODEM_HISR_stack, + sizeof(API_MODEM_HISR_stack)); + #endif + + assert (status == 0); +} + + +void l1_create_ISR (void) +{ + l1_create_HISR(); +} +#endif + +#endif /* (CODE_VERSION != SIMULATION) */ + + + +/* + * Init_Unmask_IT + * + * Unmask all used interrupts. + */ + +void Init_Unmask_IT (void) +{ + #if (CODE_VERSION != SIMULATION) + /* Reset all current interrupts */ + #if (CHIPSET == 12) || (CHIPSET == 15) + F_INTH2_VALID_NEXT(C_INTH_IRQ); /* Reset current IT in INTH2 IRQ */ + F_INTH_VALID_NEXT(C_INTH_IRQ); /* Reset current IT in INTH IRQ */ + F_INTH_VALID_NEXT(C_INTH_FIQ); /* Reset current IT in INTH FIQ */ + F_INTH_RESET_ALL_IT; /* Reset all IRQ/FIQ source */ + #elif ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11)) + INTH_RESETALLIT; + INTH_CLEAR; /* reset IRQ/FIQ source */ + #endif + + // Disable all the IRQs of ARM before unmasking the interrupts. And enable them once the unmasking is + // complete. This will ensure that no context switch happens due to coming of an already unmasked interrupt + // before completing the unmasking of the rest of the interrupts. If the context switch happens in + // before all the interrupts have been unmasked, then the control will never return to this function + //since it will go to TCT_Scheduler() and so some interrupts may remain masked. + INT_DisableIRQ(); + + // SL: TEMPORARY FIX FOR BUG ON P2 + // FRAME INTERRUPT STAY MASKED + #if ((BOARD == 35) || (BOARD == 46)) + INTH_ENABLEONEIT(IQ_FRAME); + #endif + // TEMPORARY FIX FOR BUG ON P2 + + + /* Enable Uart Modem and IrDA interrupts */ + #if ((((TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || \ + (TESTMODE) || (TRACE_TYPE==7)) && (OP_L1_STANDALONE == 1)) || \ + (OP_L1_STANDALONE == 0)) + + #if (CHIPSET == 12) || (CHIPSET == 15) + F_INTH_ENABLE_ONE_IT (C_INTH_UART_IRDA_IT); /* Enable UART_IRDA interrupts */ + #if (CHIPSET == 12) + F_INTH_ENABLE_ONE_IT(C_INTH_UART_MODEM1_IT); /* Enable UART_MODEM interrupts */ + #endif + #else + #if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || \ + (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11)) + #if ((BOARD != 35) && (BOARD != 46)) + INTH_ENABLEONEIT (IQ_UART_IRDA_IT); /* Enable UART_IRDA interrupts */ + #endif + #endif + INTH_ENABLEONEIT (IQ_UART_IT); /* Enable UART_MODEM interrupts */ + #endif + + #if (OP_L1_STANDALONE == 1) + #if (CHIPSET == 12) + F_INTH_ENABLE_ONE_IT (C_INTH_UART_MODEM2_IT); /* Enable UART_MODEM2 interrupts */ + #endif + #endif /* (OP_L1_STANDALONE == 1) */ + + #endif /* (TRACE_TYPE ...) || (OP_L1_STANDALONE == 0) */ + + /* Enable other interrupts */ + #if (OP_L1_STANDALONE == 1) + if (l1_config.pwr_mngt == PWR_MNGT) + { + + #if GEMINI_TIMER + #if (CHIPSET == 12) || (CHIPSET == 15) + F_INTH_ENABLE_ONE_IT(C_INTH_TIMER1_IT); /* Enable Timer1 interrupt */ + #else + INTH_ENABLEONEIT(IQ_TIM1); /* Enable Timer1 interrupt */ + #endif + #endif + + #if EXT_IRQ + #if (CHIPSET == 12) || (CHIPSET == 15) + F_INTH_ENABLE_ONE_IT (C_INTH_ABB_IRQ_IT); /* Enable ABB_IRQ_IT EXT_IRQ */ + #else + INTH_ENABLEONEIT(IQ_EXT); /* Enable External interrupt */ + #endif + #endif + } + + #else + #if ((CHIPSET == 12) || (CHIPSET == 15)) + F_INTH_ENABLE_ONE_IT(C_INTH_KEYBOARD_IT); + #else + #if ((BOARD == 35) || (BOARD == 46)) + INTH_ENABLEONEIT (IQ_ICR); + #else + INTH_ENABLEONEIT (IQ_ARMIO); /* Enable Keypad/GPIO Interrupt */ + #endif + #endif /* (CHIPSET == 12) */ + #endif /* OP_L1_STANDALONE */ + + + #if (CHIPSET == 12) || (CHIPSET == 15) + //enable LEAD2 interrupt + F_INTH_ENABLE_ONE_IT (C_INTH_API_IT); + #else + //enable LEAD2 interrupt + INTH_ENABLEONEIT(IQ_API); + #endif + + + /* Enable TDMA interrupt */ + #if ((CHIPSET == 12) || (CHIPSET == 15)) + #if (PSP_STANDALONE == 0) + F_INTH_ENABLE_ONE_IT (C_INTH_FRAME_IT); + #endif + #else + INTH_ENABLEONEIT(IQ_FRAME); + #endif +//--> to enable DMA Interrupt for Lite + #if ((CHIPSET == 15) ) + #if (LOCOSTO_LITE == 1) + F_INTH_ENABLE_ONE_IT (C_INTH_DMA_IT); + #endif + #endif +//<-- to enable DMA Interrupt for Lite + + #if ( (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) ) + #if (CHIPSET == 12) || (CHIPSET == 15) + F_INTH_ENABLE_ONE_IT(C_INTH_API_IT); // Enable API interrupt + #elif (CHIPSET == 10) + #if (L1_DYN_DSP_DWNLD == 1) + + //enable interrupt + INTH_ENABLEONEIT (IQ_API); + + #endif // L1_DYN_DSP_DWNLD == 1 + #endif // CHIPSET + #endif // (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC ==1) || (L1_DYN_DSP_DWNLD == 1) + // Enable the ARM IRQs once all the interrupts have been unmasked. + INT_EnableIRQ(); + #endif /* NO SIMULATION */ +} + + +/* + * Init_Serial_Flows + * + * Performs Serialswitch + related serial data flows initialization. + */ + +void Init_Serial_Flows (void) +{ + #if (OP_L1_STANDALONE == 0) + + /* + * Initialize Serial Switch module. + */ + #if ((BOARD==35) || (BOARD == 46)) + SER_InitSerialConfig (GC_GetSerialConfig()); + #else + SER_InitSerialConfig (&appli_ser_cfg_info); + #endif + /* + * Then Initialize the Serial Data Flows and the associated UARTs: + * - G2-3 Trace if GSM/GPRS Protocol Stack + * - AT-Cmd/Fax & Data Flow + * + * Layer1/Riviera Trace Flow and Bluetooth HCI Flow are initialized + * by the appropriate SW Entities. + * + * G2-3 Trace => No more Used + */ + SER_tr_Init(SER_PROTOCOL_STACK, TR_BAUD_38400, NULL); + + /* + * Fax & Data / AT-Command Interpreter Serial Data Flow Initialization + */ + + #if ((BOARD != 35) && (BOARD != 46)) + (void) SER_fd_Initialize (); + #endif + #else /* OP_L1_STANDALONE */ + + #if (TESTMODE || (TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==6) || (TRACE_TYPE==7)) + #if ((BOARD == 35) || (BOARD == 46)) + ser_cfg_info[UA_UART_0] = '0'; + #else + ser_cfg_info[UA_UART_0] = 'G'; + #endif + #if (CHIPSET !=15) + ser_cfg_info[UA_UART_1] = 'R'; // Riviear Demux on UART MODEM + #else + ser_cfg_info[UA_UART_0] = 'R'; // Riviear Demux on UART MODEM + #endif + + /* init Uart Modem */ + SER_InitSerialConfig (&appli_ser_cfg_info); + + #if TESTMODE || (TRACE_TYPE == 1) || (TRACE_TYPE == 7) + SER_tr_Init (SER_LAYER_1, TR_BAUD_115200, rvt_activate_RX_HISR); + + rvt_register_id("OTHER",&trace_id,(RVT_CALLBACK_FUNC)NULL); + #else + SER_tr_Init (SER_LAYER_1, TR_BAUD_38400, NULL); + #endif + + L1_trace_string(" \n\r"); + + #endif /* TRACE_TYPE */ + + #endif /* OP_L1_STANDALONE */ +} + +// From this point, everything is compiled to execute in internal RAM + +#if (((MOVE_IN_INTERNAL_RAM == 1) ^ (GSM_IDLE_RAM != 0)) && (GSM_IDLE_RAM != 0)) +#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_START +#if (CODE_VERSION != SIMULATION) + + #if ((CHIPSET == 12) || (CHIPSET==15)) + + #if GSM_IDLE_RAM_DEBUG + void flash_access_handler(void) + { + l1s.gsm_idle_ram_ctl.killing_flash_access++; + } + void ext_ram_access_handler(void) + { + l1s.gsm_idle_ram_ctl.killing_ext_ram_access++; + } + #endif + + void ext_ram_irq_inth_handler(void) + { + if (!READ_TRAFFIC_CONT_STATE) + CSMI_TrafficControllerOn(); + a_inth_config[F_INTH_GET_IRQ].d_it_handler(); + } + + void ext_ram_fiq_inth_handler(void) + { + if (!READ_TRAFFIC_CONT_STATE) + CSMI_TrafficControllerOn(); + a_inth_config[F_INTH_GET_FIQ].d_it_handler(); + } + #endif +#endif // (CODE_VERSION != SIMULATION) +#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_END +#endif + +#if !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM !=0)) +#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_START + +#if (PSP_STANDALONE == 0) +/*-------------------------------------------------------*/ +/* TP_FrameIntHandler() Low Interrupt service routine */ +/*-------------------------------------------------------*/ +/* Parameters : */ +/* Return : */ +/* Functionality : activate Hisr on each frame interrupt*/ +/*-------------------------------------------------------*/ +void TP_FrameIntHandler(void) +{ + + #if (OP_L1_STANDALONE == 1) + + #if (TRACE_TYPE==1) + if (trace_info.current_config->l1_dyn_trace & 1<<L1_DYN_TRACE_L1S_CPU_LOAD) + { + TM_ResetTimer (2, 0xFFFF, 1, 0); + TM_StartTimer (2); + } + #endif + + #if (TRACE_TYPE==6) + TM_ResetTimer (2, 0xFFFF, 1, 0); + TM_StartTimer (2); + #endif + + #if (TRACE_TYPE==7) /* CPU_LOAD */ + l1_cpu_load_start(); + #endif + + #else + + #if (TRACE_TYPE == 4) && (TI_NUC_MONITOR != 1) + // TM_ResetTimer (2, TIMER_RESET_VALUE, 1, 0); + // TM_StartTimer (2); + #endif + + + #if (TI_NUC_MONITOR == 1) + /* Copy LISR buffer in Log buffer each end of HISR */ + ti_nuc_monitor_tdma_action(); + #endif + + #if WCP_PROF == 1 + prf_LogFNSwitch(l1s.actual_time.fn_mod42432); + #endif + + #endif /* OP_L1_STANDALONE */ + + NU_Activate_HISR(&layer_1_sync_HISR); /* Activate HISR interrupt */ + + #if (OP_L1_STANDALONE == 0) + #if (WCP_PROF == 1) + #if (PRF_CALIBRATION == 1) + NU_Activate_HISR(&prf_CalibrationHISR); + #endif + #endif + #endif + +} +#endif + +/* + * layer_1_sync_HISR_entry + * + * HISR associated to layer 1 sync. + */ + +void layer_1_sync_HISR_entry (void) +{ +#if (PSP_STANDALONE==0) + // Call Synchronous Layer1 + hisr(); +#endif +} +#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_END +#endif // !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM !=0)) + +#if (PSP_STANDALONE == 1) + +#include "nucleus.h" +#include "tc_defs.h" + +extern TC_PROTECT TCD_System_Protect; + +/*-------------------------------------------------------*/ + /* int OS_system_protect() */ + /*-------------------------------------------------------*/ + /* Parameters : none */ + /* Return : The Thread Control Block of the thread */ + /* which already owns the protection or */ + /* 0 if no protection */ + /* Functionality : Checks whether the system structures */ + /* are already protected or not */ + /*-------------------------------------------------------*/ + void OS_system_protect (void) + { + NU_Protect((NU_PROTECT*) &TCD_System_Protect); + } + + /*-------------------------------------------------------*/ + /* int OS_system_Unprotect() */ + /*-------------------------------------------------------*/ + /* Parameters : none */ + /* Return : */ + /* Functionality : unprotect the system structures */ + /*-------------------------------------------------------*/ + void OS_system_Unprotect (void) + { + NU_Unprotect(); + } + +void bspDummy_detect(void* a,int b, void* c) +{ + return; +} + +void bspDummy_remove(int a) +{ + return; +} + +void Init_Watchdog_Timer(void) +{ +/* This code is for PSP STANDALONE Build Only */ +/* WatchDog will be used by DAR enity, so using TIMER1 for OS Ticks + This will give tick period roughly equle to 4.5 ms which approx + Frame Interrupt timing */ + Dtimer1_Init_cntl(0XE9, 1, 0x07, 1); + Dtimer1_Start(1); + F_INTH_ENABLE_ONE_IT(C_INTH_TIMER1_IT); + bspUicc_drvRegister((BspUicc_CardPresentDetectHandler)bspDummy_detect, + (BspUicc_CardAbsentDetectHandler) bspDummy_remove); +} + +#endif