| Fri, 15 Dec 2017 19:13:22 +0000 |
Mychaela Falconia |
l1_cust.c: big sleep when charging with FCHG
|
| Fri, 15 Dec 2017 19:02:09 +0000 |
Mychaela Falconia |
create_RVtasks.c: start FCHG SWE when it is included
|
| Fri, 15 Dec 2017 18:58:12 +0000 |
Mychaela Falconia |
.../drv_app/abb/board/abb_inth.c: FCHG hooked in
|
| Fri, 15 Dec 2017 18:57:05 +0000 |
Mychaela Falconia |
FCHG: logic error in the charge (re)start condition
|
| Thu, 14 Dec 2017 23:09:56 +0000 |
Mychaela Falconia |
configs/l1reconst-chg created
|
| Thu, 14 Dec 2017 22:03:48 +0000 |
Mychaela Falconia |
FCHG: complete enough to attempt linking into fw build
|
| Thu, 14 Dec 2017 21:47:40 +0000 |
Mychaela Falconia |
FCHG: task core function implemented
|
| Thu, 14 Dec 2017 21:01:59 +0000 |
Mychaela Falconia |
FCHG: API implementation started
|
| Thu, 14 Dec 2017 20:41:18 +0000 |
Mychaela Falconia |
FCHG: implemented functions for user-initiated charge start and stop
|
| Thu, 14 Dec 2017 19:54:18 +0000 |
Mychaela Falconia |
FCHG: charger plug and unplug functions implemented
|
| Thu, 14 Dec 2017 18:35:16 +0000 |
Mychaela Falconia |
FCHG: store discharge state as threshold index rather than percentage
|
| Thu, 14 Dec 2017 18:16:09 +0000 |
Mychaela Falconia |
L1: prep for charging being a possible cause of big sleep
|
| Thu, 14 Dec 2017 16:22:30 +0000 |
Mychaela Falconia |
FCHG: main ADC process implemented
|
| Thu, 14 Dec 2017 04:10:30 +0000 |
Mychaela Falconia |
l1_cust.c: added function that exports the calibrated Vbat conversion
|
| Thu, 14 Dec 2017 03:55:02 +0000 |
Mychaela Falconia |
section comment line length fix in l1_cust.c
|
| Thu, 14 Dec 2017 02:45:22 +0000 |
Mychaela Falconia |
L1 sleep logic change: allow big sleep when light is on or we are charging
|
| Fri, 08 Dec 2017 03:05:19 +0000 |
Mychaela Falconia |
.../drv_core/abb/abb.c: don't set backup battery bits in BCICONF
|
| Tue, 05 Dec 2017 05:04:09 +0000 |
Mychaela Falconia |
FCHG: reading of battery table from FFS implemented
|
| Tue, 05 Dec 2017 02:16:32 +0000 |
Mychaela Falconia |
FCHG: reading of charging config from FFS implemented
|
| Tue, 05 Dec 2017 01:29:04 +0000 |
Mychaela Falconia |
FCHG: default battery table implemented
|
| Mon, 04 Dec 2017 06:00:15 +0000 |
Mychaela Falconia |
components/fchg compilation recipe created
|
| Mon, 04 Dec 2017 05:55:58 +0000 |
Mychaela Falconia |
FCHG implementation code started
|
| Mon, 04 Dec 2017 01:17:10 +0000 |
Mychaela Falconia |
cfg-headers/rv_swe-209[12]-fchg.h created
|
| Mon, 04 Dec 2017 00:43:20 +0000 |
Mychaela Falconia |
changes under src/cs/riviera to support addition of FCHG SWE
|
| Sun, 03 Dec 2017 03:51:28 +0000 |
Mychaela Falconia |
implemented pseudo-modem keepalive for C139 and Pirelli targets
|
| Sun, 03 Dec 2017 01:24:19 +0000 |
Mychaela Falconia |
RVT: added TCH and KEEPALIVE channels
|
| Wed, 29 Nov 2017 08:10:15 +0000 |
Mychaela Falconia |
ABB_Read_Status() put under ABB_SEMAPHORE_PROTECTION
|
| Sat, 18 Nov 2017 08:39:55 +0000 |
Mychaela Falconia |
C139 target now uses Tx ramps tables extracted from Mot's own C139 fw
|
| Thu, 16 Nov 2017 05:43:03 +0000 |
Mychaela Falconia |
compiled-in afcparams numbers for Compal and Pirelli targets
|
| Wed, 15 Nov 2017 07:22:06 +0000 |
Mychaela Falconia |
AT%A output changed from hex to decimal with more descriptive names
|
| Sat, 04 Nov 2017 19:40:20 +0000 |
Mychaela Falconia |
doc/Handset-configs: L1 and the init code are now fully rebuilt from source
|
| Fri, 03 Nov 2017 21:07:17 +0000 |
Mychaela Falconia |
doc/Modem-configs: deblobbing status update
|
| Fri, 03 Nov 2017 20:45:12 +0000 |
Mychaela Falconia |
doc/Compiling: update for fc-host-tools-r7
|
| Fri, 03 Nov 2017 20:43:47 +0000 |
Mychaela Falconia |
doc/Compiling: added note that if wine doesn't whine, make nowhine a symlink
|
| Thu, 02 Nov 2017 06:59:21 +0000 |
Mychaela Falconia |
configure.sh: better comment
|
| Thu, 02 Nov 2017 06:07:08 +0000 |
Mychaela Falconia |
uartfax.c change needed for SERIAL_DYNAMIC_SWITCH=1 to compile
|
| Thu, 02 Nov 2017 05:49:53 +0000 |
Mychaela Falconia |
make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
|
| Thu, 02 Nov 2017 05:42:39 +0000 |
Mychaela Falconia |
serialswitch.c: allow enabling SERIAL_DYNAMIC_SWITCH outside of BTEMOBILE
|
| Wed, 01 Nov 2017 23:07:25 +0000 |
Mychaela Falconia |
components/cc: new CC needs -DSIM_TOOLKIT for MNCC_BEARER_CAP_REQ
|
| Tue, 31 Oct 2017 05:15:05 +0000 |
Mychaela Falconia |
components/l1_{ext,int}: no need to compile the L1_GTT dummies
|
| Tue, 31 Oct 2017 05:05:19 +0000 |
Mychaela Falconia |
compile L1_GPRS modules from source
|
| Tue, 31 Oct 2017 03:42:35 +0000 |
Mychaela Falconia |
reconstructed L1_GPRS source imported from tcs211-l1-reconst
|
| Tue, 31 Oct 2017 03:38:03 +0000 |
Mychaela Falconia |
targets/fcdev3b.conf: set DISABLE_SLEEP=1 until we find and fix the hw bug
|
| Sat, 21 Oct 2017 07:45:48 +0000 |
Mychaela Falconia |
components/tif_na7_db_ir: recompilation successful, matches original blob lib
|
| Sat, 21 Oct 2017 07:38:07 +0000 |
Mychaela Falconia |
components/tif_na7_db_fl: recompilation successful, matches original blob lib
|
| Sat, 21 Oct 2017 06:36:21 +0000 |
Mychaela Falconia |
components/misc_na7_db_{fl,ir}: compiling, perfect match to original blobs
|
| Sat, 21 Oct 2017 06:30:56 +0000 |
Mychaela Falconia |
components/frame_na7_db_ir: comment fix
|
| Sat, 21 Oct 2017 03:18:21 +0000 |
Mychaela Falconia |
components/frame_na7_db_{fl,ir}: missed the -o3
|
| Sat, 21 Oct 2017 02:50:37 +0000 |
Mychaela Falconia |
components/frame_na7_db_{fl,ir} created as an experiment
|
| Sat, 21 Oct 2017 01:12:15 +0000 |
Mychaela Falconia |
src/gpf2/{misc,tst}: import from TCS211 semi-src
|
| Sat, 02 Sep 2017 17:37:06 +0000 |
Mychaela Falconia |
aci3: integrated all Openmoko AT commands except AT@BAND
|
| Sat, 02 Sep 2017 17:05:04 +0000 |
Mychaela Falconia |
AT@SPKR and AT@VPATH ported over to aci3
|
| Thu, 31 Aug 2017 06:01:10 +0000 |
Mychaela Falconia |
implemented build option to disable sleep
|
| Sun, 27 Aug 2017 06:33:05 +0000 |
Mychaela Falconia |
aci2: AT@VPATH hooked into the command table
|
| Sun, 27 Aug 2017 06:15:53 +0000 |
Mychaela Falconia |
AT@VPATH query implemented
|
| Sun, 27 Aug 2017 05:53:20 +0000 |
Mychaela Falconia |
AT@VPATH setting implemented
|
| Sun, 27 Aug 2017 03:27:45 +0000 |
Mychaela Falconia |
aci2 AT@SPKR command: added query operation
|
| Tue, 08 Aug 2017 02:50:13 +0000 |
Mychaela Falconia |
GTA0x target: mux DSR_MODEM/LPG signal to LPG in init.c to avoid floating
|
| Tue, 08 Aug 2017 01:28:52 +0000 |
Mychaela Falconia |
GTA0x target: GPIOs 3, 10, 11 and 12 are unconnected, so drive them as outputs
|
| Mon, 07 Aug 2017 07:14:10 +0000 |
Mychaela Falconia |
targets/gtamodem.h: UARTFAX_CLASSIC_DTR_DCD turned OFF:
|
