FreeCalypso > hg > fc-small-hw

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/74LVC541APW.pinout	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,21 @@
+#pin name	pin number
+nOE1		1
+A:0		2
+A:1		3
+A:2		4
+A:3		5
+A:4		6
+A:5		7
+A:6		8
+A:7		9
+GND		10
+Y:7		11
+Y:6		12
+Y:5		13
+Y:4		14
+Y:3		15
+Y:2		16
+Y:1		17
+Y:0		18
+nOE2		19
+Vcc		20
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/MCL	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,361 @@
+# Capacitors
+
+part tant-cap-33uF:
+ value=33uF
+ footprint=EIA6032
+ description=Tantalum oxide chip capacitor, 33 uF, SMT size C
+ manufacturer=Kemet
+ manufacturer_part_number=T491C336K016AT
+ vendor=Digi-Key
+ vendor_part_number=399-3750-1-ND
+ npins=2
+
+part 0603C-X5R-1uF:
+ value=1uF
+ footprint=0603
+ description=Ceramic chip capacitor, X5R, 1 uF, 0603
+ manufacturer=Taiyo Yuden
+ manufacturer_part_number=UMK107BJ105KA-T
+ vendor=Digi-Key
+ vendor_part_number=587-2400-1-ND
+ npins=2
+
+part 0603C-X7R-100nF:
+ value=100nF
+ footprint=0603
+ description=Ceramic chip capacitor, X7R, 0.1 uF, 0603
+ manufacturer=Yageo
+ manufacturer_part_number=CC0603KRX7R9BB104
+ vendor=Digi-Key
+ vendor_part_number=311-1344-1-ND
+ npins=2
+
+part 0402C-22p:
+ value=22p
+ footprint=0402
+ description=Ceramic chip capacitor, C0G, 22 pF, 0402
+ manufacturer=TDK
+ manufacturer_part_number=C1005C0G1H220J050BA
+ vendor=Digi-Key
+ vendor_part_number=445-1239-1-ND
+ npins=2
+
+C1:
+ hier=usb.VBUS_in_cap
+ part=0603C-X7R-100nF
+
+C2:
+ hier=usb.FT2232D.XTIN_cap
+ part=0402C-22p
+
+C3:
+ hier=usb.FT2232D.XTOUT_cap
+ part=0402C-22p
+
+C4:
+ hier=usb.P_5V_cap
+ part=0603C-X7R-100nF
+
+C5:
+ hier=usb.FT2232D.AVCC_cap
+ part=0603C-X7R-100nF
+
+C6:
+ hier=usb.FT2232D.FTDI_3V3_cap
+ part=0603C-X7R-100nF
+
+C7:
+ hier=usb.P_5V_cap2
+ part=tant-cap-33uF
+
+C8:
+ hier=reg_3V3.input_cap
+ part=0603C-X5R-1uF
+
+C9:
+ hier=reg_3V3.output_cap
+ part=0603C-X5R-1uF
+
+C10:
+ hier=reg_2V8.input_cap
+ part=0603C-X5R-1uF
+
+C11:
+ hier=reg_2V8.output_cap
+ part=0603C-X5R-1uF
+
+C12:
+ hier=app.output_buf_bypass_cap
+ part=0603C-X7R-100nF
+
+C13:
+ hier=app.input_buf_bypass_cap
+ part=0603C-X7R-100nF
+
+C14:
+ hier=usb.FT2232D.VCCIOA_bypass_cap
+ part=0603C-X7R-100nF
+
+C15:
+ hier=usb.FT2232D.VCCIOB_bypass_cap
+ part=0603C-X7R-100nF
+
+# Connectors
+
+J1:
+ hier=usb.conn.conn
+ description=USB connector, receptacle, mini-B
+ manufacturer=AMP/TE
+ manufacturer_part_number=1734035-2
+ vendor=Digi-Key
+ vendor_part_number=A31727CT-ND
+ footprint=file:USB_CONN_1734035
+ npins=9			# 5 actual pins + 4 mounting pads
+
+# main DUART signal set
+J2:
+ hier=app.target_if.main_if
+ footprint=file:HEADER10_Shrouded
+ description=Shrouded header, 0.100", dual row, 10 posts
+ manufacturer=AMP/TE
+ manufacturer_part_number=2-1761603-3
+ vendor=Digi-Key
+ vendor_part_number=A97470-ND
+ npins=10
+
+# extra header for DSR, RI and GND
+J3:
+ hier=app.target_if.aux_if
+ footprint=JUMPER3
+ description=Header, 0.100", single row, 3 posts
+ manufacturer=Molex
+ manufacturer_part_number=0901200123
+ vendor=Digi-Key
+ vendor_part_number=WM8073-ND
+ npins=3
+
+# 5V & GND bringout for misc uses
+J4:
+ hier=aux_5V
+ footprint=JUMPER2
+ description=Header, 0.100", 2 posts
+ manufacturer=Molex
+ manufacturer_part_number=0901200122
+ vendor=Digi-Key
+ vendor_part_number=WM8072-ND
+ npins=2
+
+# Ferrite bead
+
+L1:
+ hier=usb.VBUS_ferrite
+ manufacturer=Murata
+ manufacturer_part_number=BLM18AG471SN1D
+ description=Ferrite bead for USB, 0603
+ vendor=Digi-Key
+ vendor_part_number=490-1013-1-ND
+ footprint=0603
+ npins=2
+
+# Resistors
+
+part 0402R-100k:
+ footprint=0402
+ value=100k
+ description=Chip resistor, 100 kOhm, 1%, 0402
+ manufacturer=Yageo
+ manufacturer_part_number=RC0402FR-07100KL
+ vendor=Digi-Key
+ vendor_part_number=311-100KLRCT-ND
+ npins=2
+
+part 0402R-10k:
+ footprint=0402
+ value=10k
+ description=Chip resistor, 10 kOhm, 1%, 0402
+ manufacturer=Vishay Dale
+ manufacturer_part_number=CRCW040210K0FKED
+ vendor=Digi-Key
+ vendor_part_number=541-10.0KLCT-ND
+ npins=2
+
+part 0402R-2k2:
+ footprint=0402
+ value=2k2
+ description=Chip resistor, 2.2 kOhm, 1%, 0402
+ manufacturer=Bourns
+ manufacturer_part_number=CR0402-FX-2201GLF
+ vendor=Digi-Key
+ vendor_part_number=CR0402-FX-2201GLFCT-ND
+ npins=2
+
+part 0402R-1k5:
+ footprint=0402
+ value=1k5
+ description=Chip resistor, 1.5 kOhm, 1%, 0402
+ manufacturer=Yageo
+ manufacturer_part_number=RC0402FR-071K5L
+ vendor=Digi-Key
+ vendor_part_number=311-1.50KLRCT-ND
+ npins=2
+
+part 0402R-470R:
+ footprint=0402
+ value=470R
+ description=Chip resistor, 470 ohm, 1%, 0402
+ manufacturer=Vishay Dale
+ manufacturer_part_number=CRCW0402470RFKEDC
+ vendor=Digi-Key
+ vendor_part_number=541-4072-1-ND
+ npins=2
+
+part 0402R-27R:
+ footprint=0402
+ value=27R
+ description=Chip resistor, 27 ohm, 1%, 0402
+ manufacturer=Yageo
+ manufacturer_part_number=RC0402FR-0727RL
+ vendor=Digi-Key
+ vendor_part_number=YAG3086CT-ND
+ npins=2
+
+R1:
+ hier=usb.FT2232D.DOUT_series_R
+ part=0402R-2k2
+
+R2:
+ hier=usb.FT2232D.DOUT_pullup_R
+ part=0402R-10k
+
+R3:
+ hier=usb.DP_pullup_R
+ part=0402R-1k5
+
+R4:
+ hier=usb.DP_series_R
+ part=0402R-27R
+
+R5:
+ hier=usb.DM_series_R
+ part=0402R-27R
+
+R6:
+ hier=usb.FT2232D.AVCC_filter_R
+ part=0402R-470R
+
+R7:
+ hier=app.TxD_series_R
+ part=0402R-2k2
+
+R8:
+ hier=app.RTS_series_R
+ part=0402R-2k2
+
+R9:
+ hier=app.DTR_series_R
+ part=0402R-2k2
+
+R10:
+ hier=app.TxD2_series_R
+ part=0402R-2k2
+
+R11:
+ hier=app.RxD_pullup
+ part=0402R-100k
+
+R12:
+ hier=app.CTS_pullup
+ part=0402R-100k
+
+R13:
+ hier=app.DSR_pullup
+ part=0402R-100k
+
+R14:
+ hier=app.DCD_pullup
+ part=0402R-100k
+
+R15:
+ hier=app.RI_pullup
+ part=0402R-100k
+
+R16:
+ hier=app.RxD2_pullup
+ part=0402R-100k
+
+# ICs
+
+U1:
+ hier=usb.FT2232D.FT2232D.pkg
+ manufacturer=FTDI
+ device=FT2232D
+ part=yes
+ description=USB to dual UART adapter IC
+ vendor=Digi-Key
+ vendor_part_number=768-1010-1-ND
+ footprint=LQFP48_7
+ npins=48
+
+U2:
+ hier=usb.FT2232D.eeprom.pkg
+ device=93C46
+ manufacturer=Atmel
+ manufacturer_part_number=AT93C46EN-SH
+ description=Serial EEPROM, 64x16, SOIC-8 package
+ footprint=SO8
+ npins=8
+
+U3:
+ hier=reg_3V3.reg.pkg
+ manufacturer=TI
+ device=TLV70233DBV
+ part=yes
+ description=LDO regulator, 3.3 V output, SOT23-5
+ vendor=Digi-Key
+ vendor_part_number=296-32415-1-ND
+ footprint=file:TLV702xxDBV
+ npins=5
+
+U4:
+ hier=reg_2V8.reg.pkg
+ manufacturer=TI
+ device=TLV70228DBV
+ part=yes
+ description=LDO regulator, 2.8 V output, SOT23-5
+ vendor=Digi-Key
+ vendor_part_number=296-39282-1-ND
+ footprint=file:TLV702xxDBV
+ npins=5
+
+part 74LVC541A:
+ device=74LVC541A
+ manufacturer=Nexperia
+ manufacturer_part_number=74LVC541APW
+ description=Octal buffer IC, TSSOP20 package
+ vendor=Digi-Key
+ vendor_part_number=1727-6370-1-ND
+ footprint=file:TSSOP20_MNF
+ pinout=74LVC541APW.pinout
+ npins=20
+
+# buffer for driving outputs from the adapter
+U5:
+ part=74LVC541A
+ slotmap=U5.slotmap
+
+# buffer for inputs coming into the adapter
+U6:
+ part=74LVC541A
+ slotmap=U6.slotmap
+
+# Crystal
+
+Y1:
+ hier=usb.FT2232D.xtal
+ manufacturer=IQD
+ manufacturer_part_number=LFXTAL026900
+ description=Crystal, 6.0 MHz, 16 pF, HC-49 SMT
+ vendor=Digi-Key
+ vendor_part_number=1923-1509-1-ND
+ footprint=HC49_SMT
+ npins=2
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/Makefile	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,29 @@
+VSRCS=	vsrc/FT2232D_block.v vsrc/FT2232D_chip.v vsrc/USB_block.v \
+	vsrc/application_block.v vsrc/board.v vsrc/eeprom_93Cx6_16bit.v \
+	vsrc/regulator_ic.v vsrc/regulator_with_caps.v vsrc/target_if.v \
+	vsrc/usb_conn.v
+BOMS=	tallied-bom.txt tallied-bom.csv comptab.txt
+NETS=	sverp.unet bound.unet pcb-netlist.txt
+
+all:	${BOMS} ${NETS}
+
+tallied-bom.txt:	MCL
+	ueda-mkbom -cr > $@
+
+tallied-bom.csv:	MCL
+	ueda-csvbom > $@
+
+comptab.txt:	MCL
+	ueda-shortbom > $@
+
+sverp.unet:	${VSRCS} primitives Makefile
+	ueda-sverp -o $@ ${VSRCS}
+
+bound.unet:	MCL sverp.unet U5.slotmap U6.slotmap
+	unet-bind -c sverp.unet $@
+
+pcb-netlist.txt:	bound.unet
+	unet2pcb bound.unet $@
+
+clean:
+	rm -f *.unet *.txt *.csv errs elements.pcb
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/U5.slotmap	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,10 @@
+#instance		slot
+app.buf_TxD2		0
+app.buf_TxD		1
+app.buf_RTS		2
+app.buf_DTR		3
+app.unused_output_buf1	4
+app.unused_output_buf2	5
+app.unused_output_buf3	6
+app.unused_output_buf4	7
+app.output_buf_common
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/U6.slotmap	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,10 @@
+#instance		slot
+app.buf_RI		0
+app.buf_DCD		1
+app.buf_DSR		2
+app.buf_CTS		3
+app.buf_RxD2		4
+app.buf_RxD		5
+app.unused_input_buf1	6
+app.unused_input_buf2	7
+app.input_buf_common
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/primitives	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,27 @@
+/*
+ * This file defines the primitives to be instantiated from the structural
+ * Verilog source for the board: IC package types, basic components and
+ * subpackages to be mapped later in the MCL binding step.
+ */
+
+resistor	numpins 2;
+capacitor	numpins 2;
+inductor	numpins 2;
+
+/* IC packages */
+pkg_LQFP48	numpins 48;
+pkg_5pin	numpins 5;
+pkg_8pin	numpins 8;
+
+/* 74LVC541A single buffer and common part subpackages */
+buffer_ic_slot		mapped_pins (A, Y);
+buffer_ic_common	mapped_pins (Vcc, GND, nOE1, nOE2);
+
+/* crystal resonator */
+xtal_2pin_pkg	numpins 2;
+
+/* connectors */
+header_2pin		numpins 2;
+header_3pin		numpins 3;
+header_10pin		numpins 10;
+conn_miniUSB_plus4	numpins 9;
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/sympath	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,1 @@
+.
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/FT2232D_block.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,90 @@
+/*
+ * This module encapsulates the FT2232D chip and its immediate accessories:
+ * the oscillator crystal, the EEPROM, the AVCC filter and the cap on 3V3OUT.
+ */
+
+module FT2232D_block (GND, VCC, VCCIOA, VCCIOB,
+		      USBDP, USBDM, RESET, RSTOUT, PWREN,
+		      ADBUS, ACBUS, SI_WUA, BDBUS, BCBUS, SI_WUB);
+
+input GND, VCC, VCCIOA, VCCIOB;
+
+inout USBDP, USBDM;
+
+input RESET;
+output RSTOUT, PWREN;
+
+inout [7:0] ADBUS, BDBUS;
+inout [3:0] ACBUS, BCBUS;
+input SI_WUA, SI_WUB;
+
+/* FT2232D pins handled within this block */
+
+wire EECS, EESK, EEDATA;
+wire XTIN, XTOUT;
+wire AVCC, FTDI_3V3;
+
+/* instantiate the FT2232D */
+
+FT2232D_chip FT2232D   (.GND(GND),
+			.AGND(GND),
+			.VCC(VCC),
+			.AVCC(AVCC),
+			.VCCIOA(VCCIOA),
+			.VCCIOB(VCCIOB),
+			.OUT_3V3(FTDI_3V3),
+			.USBDP(USBDP),
+			.USBDM(USBDM),
+			.EECS(EECS),
+			.EESK(EESK),
+			.EEDATA(EEDATA),
+			.RESET(RESET),
+			.RSTOUT(RSTOUT),
+			.TEST(GND),
+			.PWREN(PWREN),
+			.XTIN(XTIN),
+			.XTOUT(XTOUT),
+			.ADBUS(ADBUS),
+			.ACBUS(ACBUS),
+			.SI_WUA(SI_WUA),
+			.BDBUS(BDBUS),
+			.BCBUS(BCBUS),
+			.SI_WUB(SI_WUB)
+	);
+
+/* VCCIO bypass caps */
+
+capacitor VCCIOA_bypass_cap (VCCIOA, GND);
+capacitor VCCIOB_bypass_cap (VCCIOB, GND);
+
+/* AVCC filter */
+
+resistor AVCC_filter_R (VCC, AVCC);
+capacitor AVCC_cap (AVCC, GND);
+
+/* 3V3OUT */
+
+capacitor FTDI_3V3_cap (FTDI_3V3, GND);
+
+/* crystal oscillator */
+
+xtal_2pin_pkg xtal (XTIN, XTOUT);
+capacitor XTIN_cap (XTIN, GND);
+capacitor XTOUT_cap (XTOUT, GND);
+
+/* serial EEPROM */
+
+wire EEPROM_DOUT;
+
+eeprom_93Cx6_16bit eeprom (.GND(GND),
+			   .VCC(VCC),
+			   .CS(EECS),
+			   .SK(EESK),
+			   .DIN(EEDATA),
+			   .DOUT(EEPROM_DOUT)
+	);
+
+resistor DOUT_series_R (EEPROM_DOUT, EEDATA);
+resistor DOUT_pullup_R (EEPROM_DOUT, VCC);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/FT2232D_chip.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,78 @@
+/*
+ * This module encapsulates the FT2232D chip and its pinout.
+ */
+
+module FT2232D_chip (GND, AGND, VCC, AVCC, VCCIOA, VCCIOB, OUT_3V3,
+		USBDP, USBDM, EECS, EESK, EEDATA, RESET, RSTOUT, TEST, PWREN,
+		XTIN, XTOUT, ADBUS, ACBUS, SI_WUA, BDBUS, BCBUS, SI_WUB);
+
+input GND, AGND, VCC, AVCC, VCCIOA, VCCIOB;
+output OUT_3V3;
+
+inout USBDP, USBDM;
+output EECS, EESK;
+inout EEDATA;
+
+input RESET, TEST;
+output RSTOUT, PWREN;
+
+input XTIN;
+output XTOUT;
+
+inout [7:0] ADBUS, BDBUS;
+inout [3:0] ACBUS, BCBUS;
+input SI_WUA, SI_WUB;
+
+/* instantiate the package; the mapping of signals to pins is defined here */
+
+pkg_LQFP48 pkg (.pin_1(EESK),
+		.pin_2(EEDATA),
+		.pin_3(VCC),
+		.pin_4(RESET),
+		.pin_5(RSTOUT),
+		.pin_6(OUT_3V3),
+		.pin_7(USBDP),
+		.pin_8(USBDM),
+		.pin_9(GND),
+		.pin_10(SI_WUA),
+		.pin_11(ACBUS[3]),
+		.pin_12(ACBUS[2]),
+		.pin_13(ACBUS[1]),
+		.pin_14(VCCIOA),
+		.pin_15(ACBUS[0]),
+		.pin_16(ADBUS[7]),
+		.pin_17(ADBUS[6]),
+		.pin_18(GND),
+		.pin_19(ADBUS[5]),
+		.pin_20(ADBUS[4]),
+		.pin_21(ADBUS[3]),
+		.pin_22(ADBUS[2]),
+		.pin_23(ADBUS[1]),
+		.pin_24(ADBUS[0]),
+		.pin_25(GND),
+		.pin_26(SI_WUB),
+		.pin_27(BCBUS[3]),
+		.pin_28(BCBUS[2]),
+		.pin_29(BCBUS[1]),
+		.pin_30(BCBUS[0]),
+		.pin_31(VCCIOB),
+		.pin_32(BDBUS[7]),
+		.pin_33(BDBUS[6]),
+		.pin_34(GND),
+		.pin_35(BDBUS[5]),
+		.pin_36(BDBUS[4]),
+		.pin_37(BDBUS[3]),
+		.pin_38(BDBUS[2]),
+		.pin_39(BDBUS[1]),
+		.pin_40(BDBUS[0]),
+		.pin_41(PWREN),
+		.pin_42(VCC),
+		.pin_43(XTIN),
+		.pin_44(XTOUT),
+		.pin_45(AGND),
+		.pin_46(AVCC),
+		.pin_47(TEST),
+		.pin_48(EECS)
+	);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/USB_block.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,67 @@
+/*
+ * This module encapsulates the USB connector, the FT2232D block and
+ * the glue components between them.
+ */
+
+module USB_block (GND, P_5V, VCCIOA, VCCIOB,
+		  ADBUS, ACBUS, SI_WUA, BDBUS, BCBUS, SI_WUB, PWREN);
+
+output GND, P_5V;
+
+input VCCIOA, VCCIOB;
+inout [7:0] ADBUS, BDBUS;
+inout [3:0] ACBUS, BCBUS;
+input SI_WUA, SI_WUB;
+output PWREN;
+
+/* interconnecting wires */
+
+wire VBUS;
+wire DM_connector_side, DM_chip_side;
+wire DP_connector_side, DP_chip_side;
+wire RSTOUT;
+
+usb_conn conn  (.GND(GND),
+		.VBUS(VBUS),
+		.Dminus(DM_connector_side),
+		.Dplus(DP_connector_side),
+		.ID()	/* no connect */
+	);
+
+/* ferrite bead on the power supply */
+
+inductor VBUS_ferrite (VBUS, P_5V);
+
+/* series resistors on USB data lines */
+
+resistor DM_series_R (DM_connector_side, DM_chip_side);
+resistor DP_series_R (DP_connector_side, DP_chip_side);
+
+/* we can now bring in the FT2232D block */
+
+FT2232D_block FT2232D  (.GND(GND),
+			.VCC(P_5V),
+			.VCCIOA(VCCIOA),
+			.VCCIOB(VCCIOB),
+			.USBDP(DP_chip_side),
+			.USBDM(DM_chip_side),
+			.RESET(P_5V),
+			.RSTOUT(RSTOUT),
+			.PWREN(PWREN),
+			.ADBUS(ADBUS),
+			.ACBUS(ACBUS),
+			.SI_WUA(SI_WUA),
+			.BDBUS(BDBUS),
+			.BCBUS(BCBUS),
+			.SI_WUB(SI_WUB)
+	);
+
+resistor DP_pullup_R (DP_chip_side, RSTOUT);
+
+/* power bypass caps */
+
+capacitor VBUS_in_cap (VBUS, GND);
+capacitor P_5V_cap (P_5V, GND);
+capacitor P_5V_cap2 (P_5V, GND);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/application_block.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,92 @@
+/*
+ * This module encapsulates the application function of our board:
+ * dual UART with 2.8V outputs.
+ */
+
+module application_block (GND, P_3V3, P_2V8, ADBUS, BDBUS);
+
+input GND, P_3V3, P_2V8;
+
+inout [7:0] ADBUS, BDBUS;
+
+/* 2.8V output wires */
+
+wire TxD_2V8_before_R, RTS_2V8_before_R, DTR_2V8_before_R, TxD2_2V8_before_R;
+wire TxD_2V8_after_R, RTS_2V8_after_R, DTR_2V8_after_R, TxD2_2V8_after_R;
+
+/* input signal wires */
+
+wire RxD_in, CTS_in, DSR_in, DCD_in, RI_in, RxD2_in;
+
+/* output buffers */
+
+buffer_ic_common output_buf_common (.Vcc(P_2V8),
+				    .GND(GND),
+				    .nOE1(GND),
+				    .nOE2(GND)
+	);
+
+capacitor output_buf_bypass_cap (P_2V8, GND);
+
+buffer_ic_slot buf_TxD  (.A(ADBUS[0]), .Y(TxD_2V8_before_R));
+buffer_ic_slot buf_RTS  (.A(ADBUS[2]), .Y(RTS_2V8_before_R));
+buffer_ic_slot buf_DTR  (.A(ADBUS[4]), .Y(DTR_2V8_before_R));
+buffer_ic_slot buf_TxD2 (.A(BDBUS[0]), .Y(TxD2_2V8_before_R));
+
+buffer_ic_slot unused_output_buf1 (.A(GND), .Y());
+buffer_ic_slot unused_output_buf2 (.A(GND), .Y());
+buffer_ic_slot unused_output_buf3 (.A(GND), .Y());
+buffer_ic_slot unused_output_buf4 (.A(GND), .Y());
+
+/* output series resistors */
+
+resistor TxD_series_R (TxD_2V8_before_R, TxD_2V8_after_R);
+resistor RTS_series_R (RTS_2V8_before_R, RTS_2V8_after_R);
+resistor DTR_series_R (DTR_2V8_before_R, DTR_2V8_after_R);
+resistor TxD2_series_R (TxD2_2V8_before_R, TxD2_2V8_after_R);
+
+/* input buffers */
+
+buffer_ic_common input_buf_common (.Vcc(P_3V3),
+				   .GND(GND),
+				   .nOE1(GND),
+				   .nOE2(GND)
+	);
+
+capacitor input_buf_bypass_cap (P_3V3, GND);
+
+buffer_ic_slot buf_RxD  (.A(RxD_in),  .Y(ADBUS[1]));
+buffer_ic_slot buf_CTS  (.A(CTS_in),  .Y(ADBUS[3]));
+buffer_ic_slot buf_DSR  (.A(DSR_in),  .Y(ADBUS[5]));
+buffer_ic_slot buf_DCD  (.A(DCD_in),  .Y(ADBUS[6]));
+buffer_ic_slot buf_RI   (.A(RI_in),   .Y(ADBUS[7]));
+buffer_ic_slot buf_RxD2 (.A(RxD2_in), .Y(BDBUS[1]));
+
+buffer_ic_slot unused_input_buf1 (.A(GND), .Y());
+buffer_ic_slot unused_input_buf2 (.A(GND), .Y());
+
+/* input pull-up resistors */
+
+resistor RxD_pullup (RxD_in, P_2V8);
+resistor CTS_pullup (CTS_in, P_2V8);
+resistor DSR_pullup (DSR_in, P_2V8);
+resistor DCD_pullup (DCD_in, P_2V8);
+resistor RI_pullup  (RI_in,  P_2V8);
+resistor RxD2_pullup (RxD2_in, P_2V8);
+
+/* target interface headers */
+
+target_if target_if (	.GND(GND),
+			.UART0_TxD(TxD_2V8_after_R),
+			.UART0_RxD(RxD_in),
+			.UART0_RTS(RTS_2V8_after_R),
+			.UART0_CTS(CTS_in),
+			.UART0_DTR(DTR_2V8_after_R),
+			.UART0_DSR(DSR_in),
+			.UART0_DCD(DCD_in),
+			.UART0_RI(RI_in),
+			.UART1_TxD(TxD2_2V8_after_R),
+			.UART1_RxD(RxD2_in)
+	);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/board.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,37 @@
+module board ();
+
+wire GND, P_5V, P_3V3, P_2V8;
+
+wire [7:0] ADBUS, BDBUS;
+wire [3:0] ACBUS, BCBUS;
+
+USB_block usb ( .GND(GND),
+		.P_5V(P_5V),
+		.VCCIOA(P_3V3),
+		.VCCIOB(P_3V3),
+		.ADBUS(ADBUS),
+		.ACBUS(ACBUS),
+		.SI_WUA(P_3V3),
+		.BDBUS(BDBUS),
+		.BCBUS(BCBUS),
+		.SI_WUB(P_3V3),
+		.PWREN()	/* no connect */
+	);
+
+regulator_with_caps reg_3V3 (.GND(GND), .IN(P_5V), .OUT(P_3V3));
+regulator_with_caps reg_2V8 (.GND(GND), .IN(P_5V), .OUT(P_2V8));
+
+application_block app ( .GND(GND),
+			.P_3V3(P_3V3),
+			.P_2V8(P_2V8),
+			.ADBUS(ADBUS),
+			.BDBUS(BDBUS)
+	);
+
+/* auxiliary 5V output */
+
+header_2pin aux_5V (.pin_1(P_5V),
+		    .pin_2(GND)
+	);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/eeprom_93Cx6_16bit.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,19 @@
+module eeprom_93Cx6_16bit (GND, VCC, CS, SK, DIN, DOUT);
+
+input GND, VCC;
+input CS, SK, DIN;
+output DOUT;
+
+/* instantiate the package; the mapping of signals to pins is defined here */
+
+pkg_8pin pkg   (.pin_1(CS),
+		.pin_2(SK),
+		.pin_3(DIN),
+		.pin_4(DOUT),
+		.pin_5(GND),
+		.pin_6(VCC),	/* ORG input on some 93Cx6 variants */
+		.pin_7(),	/* no connect */
+		.pin_8(VCC)
+	);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/regulator_ic.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,13 @@
+module regulator_ic (IN, OUT, GND, EN);
+
+input IN, GND, EN;
+output OUT;
+
+pkg_5pin pkg (  .pin_1(IN),
+		.pin_2(GND),
+		.pin_3(EN),
+		.pin_4(),	/* no connect */
+		.pin_5(OUT)
+	);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/regulator_with_caps.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,15 @@
+module regulator_with_caps (GND, IN, OUT);
+
+input GND, IN;
+output OUT;
+
+regulator_ic reg (.IN(IN),
+		  .OUT(OUT),
+		  .GND(GND),
+		  .EN(IN)
+	);
+
+capacitor input_cap (IN, GND);
+capacitor output_cap (OUT, GND);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/target_if.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,36 @@
+/* This module captures our target interfaces. */
+
+module target_if (GND, UART0_TxD, UART0_RxD, UART0_RTS, UART0_CTS,
+		  UART0_DTR, UART0_DSR, UART0_DCD, UART0_RI,
+		  UART1_TxD, UART1_RxD);
+
+input GND;
+
+input UART0_TxD, UART0_RTS, UART0_DTR;
+output UART0_RxD, UART0_CTS, UART0_DSR, UART0_DCD, UART0_RI;
+
+input UART1_TxD;
+output UART1_RxD;
+
+/* main DUART signal set header */
+
+header_10pin main_if (  .pin_1(GND),
+			.pin_2(GND),
+			.pin_3(UART1_RxD),
+			.pin_4(UART0_RxD),
+			.pin_5(UART1_TxD),
+			.pin_6(UART0_TxD),
+			.pin_7(UART0_DCD),
+			.pin_8(UART0_CTS),
+			.pin_9(UART0_DTR),
+			.pin_10(UART0_RTS)
+	);
+
+/* auxiliary DSR and RI */
+
+header_3pin aux_if (.pin_1(GND),
+		    .pin_2(UART0_DSR),
+		    .pin_3(UART0_RI)
+	);
+
+endmodule
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/duart28c/src/vsrc/usb_conn.v	Wed Jul 29 07:08:28 2020 +0000
@@ -0,0 +1,21 @@
+/*
+ * This module captures the mini-USB connector.
+ */
+
+module usb_conn (GND, VBUS, Dminus, Dplus, ID);
+
+inout GND, VBUS, Dminus, Dplus, ID;
+
+conn_miniUSB_plus4 conn (.pin_1(VBUS),
+			 .pin_2(Dminus),
+			 .pin_3(Dplus),
+			 .pin_4(ID),
+			 .pin_5(GND),
+			 /* mounting pads */
+			 .pin_6(GND),
+			 .pin_7(GND),
+			 .pin_8(GND),
+			 .pin_9(GND)
+	);
+
+endmodule