FreeCalypso > hg > fc-tourmaline
diff src/cs/layer1/include/l1_const.h @ 0:4e78acac3d88
src/{condat,cs,gpf,nucleus}: import from Selenite
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 16 Oct 2020 06:23:26 +0000 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/cs/layer1/include/l1_const.h Fri Oct 16 06:23:26 2020 +0000 @@ -0,0 +1,1393 @@ + /************* Revision Controle System Header ************* + * GSM Layer 1 software + * L1_CONST.H + * + * Filename l1_const.h + * Copyright 2003 (C) Texas Instruments + * + ************* Revision Controle System Header *************/ + +#ifdef __MSDOS__ // Running BORLANDC compiler. + #ifdef MVC + #define EXIT exit(0) + #define FAR + #else + #define EXIT DOS_Exit(0) + #define FAR far + #endif +#else // Running ARM compiler. + #define FAR + #define EXIT exit(0) + #define stricmp strcmp +#endif + + +#if (CODE_VERSION != SIMULATION) + #define NULL 0 +#endif + +#define NO_PAR 0 + +#define NO_TASK 0 +#define ALL_TASK 0xffffffff +#define ALL_PARAM 0xffffffff + +#define TRUE 1 +#define TRUE_L 1L +#define FALSE 0 + +#define NOT_PENDING 0 +#define PENDING 1 + +#define INACTIVE 2 +#define ACTIVE 3 +#define RE_ENTERED 4 +#define WAIT_IQ 5 + +//--------------------------------------------- +// MCU-DSP bit-field bit position definitions +//--------------------------------------------- +#if L1_GPRS + #define GPRS_SCHEDULER 1 // Select GPRS scheduler +#endif +#define GSM_SCHEDULER 2 // Select GSM scheduler + +//----------------------------- +// POWER MANAGEMENT............ +//----------------------------- +#define MIN_SLEEP_TIME (SETUP_FRAME+2+l1_config.params.setup_afc_and_rf) //HW WAKE-UP+MIN_SLEEP(2)+AFC RESTORE(2) +#define TPU_LOAD 01 +#define TPU_FREEZE 02 + +// SLEEP ALGO SWITCH +#define NO_SLEEP 00 // ------ + ------ + ------ +#define SMALL_SLEEP 01 // SMALL + ------ + ------ +#define BIG_SLEEP 02 // ------ + BIG + ------ +#define DEEP_SLEEP 03 // ------ + BIG + DEEP +#define ALL_SLEEP 04 // SMALL + BIG + DEEP +#define BIG_SMALL_SLEEP 05 // SMALL + BIG + ------ + +// GAUGING SAMPLES +#define SIZE_HIST 10 +#define MAX_BAD_GAUGING 3 + +// GAUG_IN_32T = (HF in clock of 13Mhz*dpll) * ( LF in Khz) +#define GAUG_IN_32T 1348 // gauging duration is 1348*T32 measured on eva4 + +// DSP state need to be used to enter Deep Sleep mode +#if (W_A_DSP_IDLE3 == 1) + #define C_DSP_IDLE3 3 +#endif + +//------------------------------------------------- +// INIT: value is 32.768Khz at [-500 ppm, +100 ppm] +// to face temperature variation +// +// ACQUIS: variations allowed 32.768Khz +- 50 ppm + // 9 frames gauging is 1348*T32 (measured on eva4) +// UPDATE: variation allowed is +- 6 ppm jitter +//------------------------------------------------- + +#define MCUCLK 13000 // 13 Mhz +#define LF 32.768 +#define LF_100PPM 32.7712768 // 32.768*(1+100*10E-6) +#define LF_500PPM 32.751616 // 32.768*(1-500*10E-6) +#define LF_50PPM 32.7696384 // 32.768*(1+50*10E-6) +#define LF_6PPM 32.76819661 // 32.768*(1+6*10E-6) + +#define NB_INIT 5 // nbr of gauging to pass to ACQUIS +#define NB_ACQU 10 // nbr of gauging to pass to UPDATE + +#if (CHIPSET ==2 || CHIPSET ==3 || CHIPSET == 5 || CHIPSET == 6 || CHIPSET == 9) // PLL is at 65 Mhz !!!!!! + #define PLL 5 // 5*13Mhz = 65 Mhz + //------------------------------------------------- + // INIT: value is 32.768Khz at [-500 ppm, +100 ppm] + // + // ACQUIS: variations allowed 32.768Khz +- 50 ppm + // 9 frames gauging is 1348*T32 (measured on eva4) + // UPDATE: variation allowed is +- 6 ppm jitter + //------------------------------------------------- + #define C_CLK_MIN 1983 // 65000/32.7712768 = 1983.444234 + #define C_CLK_INIT_MIN 29113 // 0.444234*2^16 + #define C_CLK_MAX 1984 // 65000 / 32.751616 = 1984.634896 + #define C_CLK_INIT_MAX 41608 // 0.634896*2^16 + #define C_DELTA_HF_ACQUIS 130 // 1348/32.768-1348/32.7696384 = 0.002056632ms + // 0.002056632/0.0001538 = 130 T65Mhz + #define C_DELTA_HF_UPDATE 15 // 1348/32.768-1348/32.76819661 =0.00024691ms + // 0.00024691/0.0001538 = 15 T65Mhz +#endif + +#define ARMIO_CLK_CUT 0x0001 +#define UWIRE_CLK_CUT 0x0002 + +//----------------------------- +// Neighbour cell sync. reading +//----------------------------- +#if (L1_12NEIGH) + #define NBR_NEIGHBOURS 12 +#else + #define NBR_NEIGHBOURS 6 +#endif + +//----------------------------- +// LAYER 1 MEASUREMENT TASKS... +//----------------------------- +#define NBR_L1S_MEAS_TASKS 4 + +#define FSMS 0 +#define I_BAMS 1 +#define D_BAMS 2 +#define SERVMS 3 + +#define FSMS_MEAS (TRUE_L << FSMS) // Measurement task on FULL list (Cell Selection/Idle). +#define I_BAMS_MEAS (TRUE_L << I_BAMS) // Measurement task on BA list in Idle. +#define D_BAMS_MEAS (TRUE_L << D_BAMS) // Measurement task on BA list in Dedicated. +#define SERVMS_MEAS (TRUE_L << SERVMS) // Measurement task for Serving. + +#define FSMS_MEAS_MASK ALL_TASK ^ FSMS_MEAS +#define I_BAMS_MEAS_MASK ALL_TASK ^ I_BAMS_MEAS +#define D_BAMS_MEAS_MASK ALL_TASK ^ D_BAMS_MEAS +#define SERVMS_MEAS_MASK ALL_TASK ^ SERVMS_MEAS + +#define A_D_BLEN 456 // SACCH/SDCCH data block length (GSM 5.01 $7) +#define TCH_FS_BLEN 378 // TCH FULL SPEECH block length +#define TCH_HS_BLEN 211 // TCH HALF SPEECH block length +#define TCH_F_D_BLEN 456 // FACCH, TCH_DATA block length + +/* + * FreeCalypso Frankenstein: the following definition was not present in + * our TCS211 version and we had to pull it from the LoCosto version for + * l1_cmplx.c to compile. However, the comment in the place where it is + * used says that it "valuable for code running on target with DSP 3606." + */ +#define MIN_ACCEPTABLE_SNR_FOR_SB 200 // threshold under which a SB shall be considered as not found + +// Define max PM/TDMA according to DSP code and TPU RAM size +//---------------------------------------------------------- + +// NOTE: we should use a global variable initialized at L1 start and function of rx synth setup time. + +#if ((CHIPSET == 2) || (CHIPSET == 3) || (CHIPSET == 4)) + + // TPU RAM size limitation + + #define NB_MEAS_MAX 4 + #define NB_MEAS_MAX_GPRS 4 + +#elif ((CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) + + #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + + // DSP code 33: upto 8 PMs with GSM and GPRS scheduler + + #define NB_MEAS_MAX 8 + #define NB_MEAS_MAX_GPRS 8 + + #elif (DSP == 32) + + // DSP code prior to code 33 support upto 4 PMs with GSM scheduler + // and 8 PMs with GPRS scheduler, 6 for DSP 32 because of CPU load + + #define NB_MEAS_MAX 4 + #define NB_MEAS_MAX_GPRS 6 + + #else + + + // DSP code prior to code 33 support upto 4 PMs with GSM scheduler + // and 8 PMs with GPRS scheduler + + #define NB_MEAS_MAX 4 + #define NB_MEAS_MAX_GPRS 8 + + #endif +#endif +#if (AMR == 1) + #define SID_UPDATE_BLEN 212 // SID UPDATE block length + #define RATSCCH_BLEN 212 // RATSCCH block length + #define TCH_AFS_BLEN 448 // TCH Adaptative Full rate Speech block length + // Note: the d_nerr value is calculated thanks to the bit class 1 of the block. + // But the number AHS bit class 1 depends on the type of vocoder currently used (c.f. 5.03 &3.10.7.2) + #define TCH_AHS_7_95_BLEN 188 // TCH AHS 7.95 Speech block length + #define TCH_AHS_7_4_BLEN 196 // TCH AHS 7.4 Speech block length + #define TCH_AHS_6_7_BLEN 200 // TCH AHS 6.7 Speech block length + #define TCH_AHS_5_9_BLEN 208 // TCH AHS 5.9 Speech block length + #define TCH_AHS_5_15_BLEN 212 // TCH AHS 5.15 Speech block length + #define TCH_AHS_4_75_BLEN 212 // TCH AHS 4.75 Speech block length +#endif +//---------------------------------------- +// LAYER 1 Asynchronous processes names... +//---------------------------------------- +#if (TESTMODE) && !(L1_GPRS) + #if (AUDIO_TASK == 1) + #if (L1_GTT) + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 45 + #else + #define NBR_L1A_PROCESSES 44 + #endif + #else + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 44 + #else + #define NBR_L1A_PROCESSES 43 + #endif + #endif + #else + #if (L1_GTT) + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 27 + #else + #define NBR_L1A_PROCESSES 26 + #endif + #else + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 26 + #else + #define NBR_L1A_PROCESSES 25 + #endif + #endif +#endif +#endif + +#if (TESTMODE) && (L1_GPRS) + #if (AUDIO_TASK == 1) + #if (L1_GTT) + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 46 + #else + #define NBR_L1A_PROCESSES 45 + #endif + #else + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 45 + #else + #define NBR_L1A_PROCESSES 44 + #endif + #endif + #else + #if (L1_GTT) + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 28 + #else + #define NBR_L1A_PROCESSES 27 + #endif + #else + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 27 + #else + #define NBR_L1A_PROCESSES 26 + #endif + #endif +#endif +#endif + +#if !(TESTMODE) + #if (AUDIO_TASK == 1) + #if (L1_GTT) + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 37 + #else + #define NBR_L1A_PROCESSES 36 + #endif + #else + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 36 + #else + #define NBR_L1A_PROCESSES 35 + #endif + #endif + #else + #if (L1_GTT) + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 19 + #else + #define NBR_L1A_PROCESSES 18 + #endif + #else + #if (OP_L1_STANDALONE == 1) + #define NBR_L1A_PROCESSES 18 + #else + #define NBR_L1A_PROCESSES 17 + #endif + #endif +#endif +#endif + + +#define FULL_MEAS 0 // l1a_full_list_meas_process(msg) +#define CS_NORM 1 // l1a_cs_bcch_process(msg) +#define I_6MP 2 // l1a_idle_6strongest_monitoring_process(msg) +#define I_SCP 3 // l1a_idle_serving_cell_paging_process(msg) +#define I_SCB 4 // l1a_idle_serving_cell_bcch_reading_process(msg) +#define I_SMSCB 5 // l1a_idle_smscb_process(msg) +#define CR_B 6 // l1a_cres_process(msg) +#define ACCESS 7 // l1a_access_process(msg) +#define DEDICATED 8 // l1a_dedicated_process(msg) +#define I_FULL_MEAS 9 // l1a_dedicated_process(msg) +#define I_NMEAS 10 // l1a_idle_ba_meas_process(msg) +#define DEDIC_6 11 // l1a_dedic6_process(msg) +#define D_NMEAS 12 // l1a_dedic_ba_list_meas_process(msg) +#define HW_TEST 13 // l1a_test_process(msg) +#define I_BCCHN 14 // l1a_idle_neighbour_cell_bcch_reading_process(msg) +#define I_ADC 15 // l1a_mmi_adc_req(msg) + +#if (TESTMODE) && !(L1_GPRS) + #define TMODE_FB0 16 // l1a_tmode_fb0_process(msg) + #define TMODE_FB1 17 // l1a_tmode_fb1_process(msg) + #define TMODE_SB 18 // l1a_tmode_sb_process(msg) + #define TMODE_BCCH 19 // l1a_tmode_bcch_reading_process(msg) + #define TMODE_RA 20 // l1a_tmode_access_process(msg) + #define TMODE_DEDICATED 21 // l1a_tmode_dedicated_process(msg) + #define TMODE_FULL_MEAS 22 // l1a_tmode_full_list_meas_process(msg) + #define TMODE_PM 23 // l1a_tmode_meas_process(msg) + #if (AUDIO_TASK == 1) + #define L1A_KEYBEEP_STATE 24 // l1a_mmi_keybeep_process(msg) + #define L1A_TONE_STATE 25 // l1a_mmi_tone_process(msg) + #define L1A_MELODY0_STATE 26 // l1a_mmi_melody0_process(msg) + #define L1A_MELODY1_STATE 27 // l1a_mmi_melody1_process(msg) + #define L1A_VM_PLAY_STATE 28 // l1a_mmi_vm_playing_process(msg) + #define L1A_VM_RECORD_STATE 29 // l1a_mmi_vm_recording_process(msg) + #define L1A_SR_ENROLL_STATE 30 // l1a_mmi_sr_enroll_process(msg) + #define L1A_SR_UPDATE_STATE 31 // l1a_mmi_sr_update_process(msg) + #define L1A_SR_RECO_STATE 32 // l1a_mmi_sr_reco_process(msg) + #define L1A_SR_UPDATE_CHECK_STATE 33 // l1a_mmi_sr_update_check_process(msg) + #define L1A_AEC_STATE 34 // l1a_mmi_aec_process(msg) + #define L1A_FIR_STATE 35 // l1a_mmi_fir_process(msg) + #define L1A_AUDIO_MODE_STATE 36 // l1a_mmi_audio_mode_process(msg) + #define L1A_MELODY0_E2_STATE 37 // l1a_mmi_melody0_e2_process(msg) + #define L1A_MELODY1_E2_STATE 38 // l1a_mmi_melody1_e2_process(msg) + #define L1A_VM_AMR_PLAY_STATE 39 // l1a_mmi_vm_amr_playing_process(msg) + #define L1A_VM_AMR_RECORD_STATE 40 // l1a_mmi_vm_amr_recording_process(msg) + #define L1A_CPORT_STATE 41 // l1a_mmi_cport_process(msg) + #if (L1_GTT == 1) + #define L1A_GTT_STATE 42 // l1a_mmi_gtt_process(msg) + #define INIT_L1 43 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 44 // l1a_test_config_process(msg) + #endif + #else + #define INIT_L1 42 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 43 // l1a_test_config_process(msg) + #endif + #endif + #else + #if (L1_GTT == 1) + #define L1A_GTT_STATE 24 // l1a_mmi_gtt_process(msg) + #define INIT_L1 25 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 26 // l1a_test_config_process(msg) + #endif + #else + #define INIT_L1 24 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 25 // l1a_test_config_process(msg) + #endif + #endif + #endif +#endif + +#if (TESTMODE) && (L1_GPRS) + #define TMODE_FB0 16 // l1a_tmode_fb0_process(msg) + #define TMODE_FB1 17 // l1a_tmode_fb1_process(msg) + #define TMODE_SB 18 // l1a_tmode_sb_process(msg) + #define TMODE_BCCH 19 // l1a_tmode_bcch_reading_process(msg) + #define TMODE_RA 20 // l1a_tmode_access_process(msg) + #define TMODE_DEDICATED 21 // l1a_tmode_dedicated_process(msg) + #define TMODE_FULL_MEAS 22 // l1a_tmode_full_list_meas_process(msg) + #define TMODE_PM 23 // l1a_tmode_meas_process(msg) + #define TMODE_TRANSFER 24 // l1a_tmode_transfer_process(msg) + #if (AUDIO_TASK == 1) + #define L1A_KEYBEEP_STATE 25 // l1a_mmi_keybeep_process(msg) + #define L1A_TONE_STATE 26 // l1a_mmi_tone_process(msg) + #define L1A_MELODY0_STATE 27 // l1a_mmi_melody0_process(msg) + #define L1A_MELODY1_STATE 28 // l1a_mmi_melody1_process(msg) + #define L1A_VM_PLAY_STATE 29 // l1a_mmi_vm_playing_process(msg) + #define L1A_VM_RECORD_STATE 30 // l1a_mmi_vm_recording_process(msg) + #define L1A_SR_ENROLL_STATE 31 // l1a_mmi_sr_enroll_process(msg) + #define L1A_SR_UPDATE_STATE 32 // l1a_mmi_sr_update_process(msg) + #define L1A_SR_RECO_STATE 33 // l1a_mmi_sr_reco_process(msg) + #define L1A_SR_UPDATE_CHECK_STATE 34 // l1a_mmi_sr_update_check_process(msg) + #define L1A_AEC_STATE 35 // l1a_mmi_aec_process(msg) + #define L1A_FIR_STATE 36 // l1a_mmi_fir_process(msg) + #define L1A_AUDIO_MODE_STATE 37 // l1a_mmi_audio_mode_process(msg) + #define L1A_MELODY0_E2_STATE 38 // l1a_mmi_melody0_e2_process(msg) + #define L1A_MELODY1_E2_STATE 39 // l1a_mmi_melody1_e2_process(msg) + #define L1A_VM_AMR_PLAY_STATE 40 // l1a_mmi_vm_amr_playing_process(msg) + #define L1A_VM_AMR_RECORD_STATE 41 // l1a_mmi_vm_amr_recording_process(msg) + #define L1A_CPORT_STATE 42 // l1a_mmi_cport_process(msg) + #if (L1_GTT == 1) + #define L1A_GTT_STATE 43 + #define INIT_L1 44 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 45 // l1a_test_config_process(msg) + #endif + #else + #define INIT_L1 43 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 44 // l1a_test_config_process(msg) + #endif + #endif + #else + #if (L1_GTT == 1) + #define L1A_GTT_STATE 25 + #define INIT_L1 26 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 27 // l1a_test_config_process(msg) + #endif + #else + #define INIT_L1 25 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 26 // l1a_test_config_process(msg) + #endif + #endif + #endif +#endif + +#if !(TESTMODE) && (AUDIO_TASK == 1) + #define L1A_KEYBEEP_STATE 16 // l1a_mmi_keybeep_process(msg) + #define L1A_TONE_STATE 17 // l1a_mmi_tone_process(msg) + #define L1A_MELODY0_STATE 18 // l1a_mmi_melody0_process(msg) + #define L1A_MELODY1_STATE 19 // l1a_mmi_melody1_process(msg) + #define L1A_VM_PLAY_STATE 20 // l1a_mmi_vm_playing_process(msg) + #define L1A_VM_RECORD_STATE 21 // l1a_mmi_vm_recording_process(msg) + #define L1A_SR_ENROLL_STATE 22 // l1a_mmi_sr_enroll_process(msg) + #define L1A_SR_UPDATE_STATE 23 // l1a_mmi_sr_update_process(msg) + #define L1A_SR_RECO_STATE 24 // l1a_mmi_sr_reco_process(msg) + #define L1A_SR_UPDATE_CHECK_STATE 25 // l1a_mmi_sr_update_check_process(msg) + #define L1A_AEC_STATE 26 // l1a_mmi_aec_process(msg) + #define L1A_FIR_STATE 27 // l1a_mmi_fir_process(msg) + #define L1A_AUDIO_MODE_STATE 28 // l1a_mmi_audio_mode_process(msg) + #define L1A_MELODY0_E2_STATE 29 // l1a_mmi_melody0_e2_process(msg) + #define L1A_MELODY1_E2_STATE 30 // l1a_mmi_melody1_e2_process(msg) + #define L1A_VM_AMR_PLAY_STATE 31 // l1a_mmi_vm_amr_playing_process(msg) + #define L1A_VM_AMR_RECORD_STATE 32 // l1a_mmi_vm_amr_recording_process(msg) + #define L1A_CPORT_STATE 33 // l1a_mmi_cport_process(msg) + #if (L1_GTT == 1) + #define L1A_GTT_STATE 34 // l1a_mmi_tty_process(msg) + #define INIT_L1 35 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 36 // l1a_test_config_process(msg) + #endif + #else + #define INIT_L1 34 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 35 // l1a_test_config_process(msg) + #endif + #endif +#elif !(TESTMODE) && !(AUDIO_TASK == 1) + #if (L1_GTT == 1) + #define L1A_GTT_STATE 16 // l1a_mmi_tty_process(msg) + #define INIT_L1 17 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 18 // l1a_test_config_process(msg) + #endif + #else + #define INIT_L1 16 // l1a_init_layer1_process(msg) + #if (OP_L1_STANDALONE == 1) + #define HSW_CONF 17 // l1a_test_config_process(msg) + #endif + #endif +#endif + +#if TESTMODE + #define TMODE_UPLINK (1<<0) + #define TMODE_DOWNLINK (1<<1) +#endif + +//------------------------------------ +// LAYER 1 DOWNLINK & UPLINK TASKS... +//------------------------------------ +#define TASK_DISABLED 0 +#define TASK_ENABLED 1 + +#define SEMAPHORE_RESET 0 +#define SEMAPHORE_SET 1 + +#define NO_NEW_TASK -1 + + +// Tasks in the order of their priority (low to high). + +#if !L1_GPRS + + #define NBR_DL_L1S_TASKS 32 + + //GSM_TASKS/ + #define HWTEST 0 // DSP checksum reading + #define ADC_CSMODE0 1 // ADC task in CS_MODE0 mode + #define DEDIC 2 // Global Dedicated mode switch + #define RAACC 3 // Channel access (ul) + #define RAHO 4 // Handover access (ul) + #define NSYNC 5 // Global Neighbour cell synchro switch + #define FBNEW 6 // Frequency burst search (Idle mode) + #define SBCONF 7 // Synchro. burst confirmation + #define SB2 8 // Synchro. burst read (1 frame uncertainty / SB position) + #define FB26 9 // Frequency burst search, dedic/transfer mode MF26 or MF52 + #define SB26 10 // Synchro burst search, dedic/transfer mode MF26 or MF52 + #define SBCNF26 11 // Synchro burst confirmation, dedic/transfer mode MF26 or MF52 + #define FB51 12 // Frequency burst search, dedic mode MF51 + #define SB51 13 // Synchro burst search, dedic MF51 + #define SBCNF51 14 // Synchro burst confirmation, dedic MF51 + #define BCCHN 15 // BCCH Neighbor in GSM Idle + #define ALLC 16 // All CCCH Reading + #define EBCCHS 17 // Extended BCCH Serving Reading + #define NBCCHS 18 // Normal BCCH ServingReading + #define SMSCB 19 // CBCH serving Reading + #define NP 20 // Normal paging Reading + #define EP 21 // Extended pagingReading + #define ADL 22 // SACCH(SDCCH) DL + #define AUL 23 // SACCH(SDCCH) UL + #define DDL 24 // SDCCH DL + #define DUL 25 // SDCCH UL + #define TCHD 26 // Dummy for TCH Half rate + #define TCHA 27 // SACCH(TCH) + #define TCHTF 28 // TCH Full rate + #define TCHTH 29 // TCH Half rate + #define BCCHN_TOP 30 // BCCH Neighbour TOP priority in Idle mode + #define SYNCHRO 31 // synchro task: L1S reset + //END_GSM_TASKS/ + +#else + + #define NBR_DL_L1S_TASKS 45 + + //GPRS_TASKS/ + #define HWTEST 0 // DSP checksum reading + #define ADC_CSMODE0 1 // ADC task in CS_MODE0 mode + #define DEDIC 2 // Global Dedicated mode switch + #define RAACC 3 // Channel access (ul) + #define RAHO 4 // Handover access (ul) + #define NSYNC 5 // Global Neighbour cell synchro switch + #define POLL 6 // Packet Polling (Access) + #define PRACH 7 // Packet Random Access Channel + #define ITMEAS 8 // Interference measurements + #define FBNEW 9 // Frequency burst search (Idle mode) + #define SBCONF 10 // Synchro. burst confirmation + #define SB2 11 // Synchro. burst read (1 frame uncertainty / SB position) + #define PTCCH 12 // Packet Timing Advance control channel + #define FB26 13 // Frequency burst search, dedic/transfer mode MF26 or MF52 + #define SB26 14 // Synchro burst search, dedic/transfer mode MF26 or MF52 + #define SBCNF26 15 // Synchro burst confirmation, dedic/transfer mode MF26 or MF52 + #define FB51 16 // Frequency burst search, dedic mode MF51 + #define SB51 17 // Synchro burst search, dedic MF51 + #define SBCNF51 18 // Synchro burst confirmation, dedic MF51 + #define PDTCH 19 // Packet Data channel + #define BCCHN 20 // BCCH Neighbor in GSM Idle + #define ALLC 21 // All CCCH Reading + #define EBCCHS 22 // Extended BCCH Serving Reading + #define NBCCHS 23 // Normal BCCH Serving Reading + #define ADL 24 // SACCH(SDCCH) DL + #define AUL 25 // SACCH(SDCCH) UL + #define DDL 26 // SDCCH DL + #define DUL 27 // SDCCH UL + #define TCHD 28 // Dummy for TCH Half rate + #define TCHA 29 // SACCH(TCH) + #define TCHTF 30 // TCH Full rate + #define TCHTH 31 // TCH Half rate + #define PALLC 32 // All PCCCH reading + #define SMSCB 33 // CBCH serving Reading + #define PBCCHS 34 // PBCCH serving reading + #define PNP 35 // Packet Normal paging Reading + #define PEP 36 // Packet Extended paging Reading + #define SINGLE 37 // Single Block for GPRS + #define PBCCHN_TRAN 38 // Packet BCCH Neighbor in Packet Transfer mode. + #define PBCCHN_IDLE 39 // Packet BCCH Neighbor in Idle mode. + #define BCCHN_TRAN 40 // BCCH Neighbour in Packet Transfer mode + #define NP 41 // Normal paging Reading + #define EP 42 // Extended paging Reading + #define BCCHN_TOP 43 // BCCH Neighbour TOP priority in Idle mode + #define SYNCHRO 44 // synchro task: L1S reset + //END_GPRS_TASKS/ + +#endif + +//------------------------------------ +// LAYER 1 API +//------------------------------------ +#define MCSI_PORT1 0 +#define MCSI_PORT2 1 + + +//--------------------------------- +// DSP vocoder Enable/ Disable +//--------------------------------- + +#if (L1M_WAIT_DSP_RESTART_AFTER_VOCODER_ENABLE ==1) + #if (FF_L1_TCH_VOCODER_CONTROL == 1) + #define TCH_VOCODER_DISABLE_REQ 0 + #define TCH_VOCODER_ENABLE_REQ 1 + #define TCH_VOCODER_ENABLED 2 + #define TCH_VOCODER_DISABLED 3 + + // Number of TDMA wait frames until the DSP output is steady + #define DSP_VOCODER_ON_TRANSITION 165 + #endif // FF_L1_TCH_VOCODER_CONTROL +#endif + +//--------------------------------- +// Handover Finished cause defines. +//--------------------------------- +#define HO_COMPLETE 0 +#define HO_TIMEOUT 1 + +//--------------------------------- +// FB detection algorithm defines. +//--------------------------------- +#define FB_MODE_0 0 // FB detec. mode 0. +#define FB_MODE_1 1 // FB detec. mode 1. + +//--------------------------------- +// AFC control defines. +//--------------------------------- +#define AFC_INIT 1 +#define AFC_OPEN_LOOP 2 +#define AFC_CLOSED_LOOP 3 + +// For VCXO algo. +#if (VCXO_ALGO) +#define AFC_INIT_CENTER 4 +#define AFC_INIT_MAX 5 +#define AFC_INIT_MIN 6 +#endif +//--------------------------------- +// TOA control defines. +//--------------------------------- +#define TOA_INIT 1 +#define TOA_RUN 2 + +//--------------------------------- +// Neighbour Synchro possible status. +//--------------------------------- +#define NSYNC_FREE 0 +#define NSYNC_PENDING 1 +#define NSYNC_COMPLETED 2 +#if (L1_12NEIGH ==1) + #define NSYNC_WAIT 3 +#endif + +/************************************/ +/* Layer 1 constants declaration... */ +/************************************/ +#define MAX_FN ((UWORD32)26*51*2048) + +#if L1_GPRS + #define MAX_BLOCK_ID ((UWORD32) (3 * (UWORD32) (MAX_FN / 13))) // Block ID corresponding to fn = FN MAX +#endif + +//-------------------------------------------------------- +// standard specific constants used in l1_config.std.xxx +//-------------------------------------------------------- + + +// GSM +#define FIRST_ARFCN_GSM 1 // 1st arfcn is 1 +#define NBMAX_CARRIER_GSM 124 // 124 for GSM, 174 for E_GSM, 374 for DCS1800. +#define MAX_TXPWR_GSM 19 // lowest power ctrl level value in GSM band +// GSM_E +#define FIRST_ARFCN_EGSM 1 // 1st arfcn is 1 +#define NBMAX_CARRIER_EGSM 174 // 174 carriers for GSM_E. +#define MAX_TXPWR_EGSM 19 // lowest power ctrl level value in GSM-E band +// PCS1900 +#define FIRST_ARFCN_PCS 512 // 1st arfcn is 512 +#define NBMAX_CARRIER_PCS 299 // 299 carriers for PCS1900. +#define MAX_TXPWR_PCS 15 // lowest power ctrl level value in PCS band +#define TXPWR_TURNING_POINT_PCS 21 +// DCS1800 +#define FIRST_ARFCN_DCS 512 // 1st arfcn is 512 +#define NBMAX_CARRIER_DCS 374 // 374 carriers for DCS1800. +#define MAX_TXPWR_DCS 15 // lowest power ctrl level value in DCS band +#define TXPWR_TURNING_POINT_DCS 28 +// GSM850 +#define FIRST_ARFCN_GSM850 128 // 1st arfcn is 128 +#define NBMAX_CARRIER_GSM850 124 // 124 carriers for GSM850 +#define NBMEAS_GSM850 3 // 3 measurement per frame TBD +#define MAX_TXPWR_GSM850 19 // lowest power ctrl level value in GSM band +// DUAL +#define FIRST_DCS_INDEX_DUAL 125 // 1st DCS index within the 498 continu list +#define NBMAX_CARRIER_DUAL 124+374 // 374 carriers for DCS1800 + 124 carriers for GSM900 Band +#define TXPWR_TURNING_POINT_DUAL 28 +// DUALEXT +#define FIRST_DCS_INDEX_DUALEXT 175 // 1st DCS index within the 548 continu list +#define NBMAX_CARRIER_DUALEXT 174+374 // 374 carriers for DCS1800 + 174 carriers for E-GSM900 Band +#define TXPWR_TURNING_POINT_DUALEXT 28 +// DUAL_US +#define FIRST_ARFCN_GSM850_DUAL_US 1 // 1st GSM850 index within the 423 continu list +#define FIRST_PCS_INDEX_DUAL_US 125 // 1st PCS index within the 423 continu list +#define NBMAX_CARRIER_DUAL_US 124+299 // 299 carriers for PCS1900 + 124 carriers for GSM850\ Band +#define NBMEAS_DUAL_US 4 // 4 measurements per frames. +#define TXPWR_TURNING_POINT_DUAL_US 28 // TBD + + +#define NBMAX_CARRIER NBMAX_CARRIER_DUALEXT //used in arrays for power measurement + //non optimized!!! (dynamic memory allocation to optimize) +#define BAND1 1 +#define BAND2 2 + +#define NO_TXPWR 255 // sentinal value used with UWORD8 type. + + +//-------------------------------------------------------- +// Receive level values. +//-------------------------------------------------------- +#define RXLEV63 63 // max value for RXLEV. +#define IL_MIN 240 // minimum input level is -120 dbm. + +//-------------------------------------------------------- +// Max number of cell to report in MPHC_RXLEV_IND. +// Nb cells to check to see if cell of MPHC_NETWORK_SYNC_REQ has been detected +//-------------------------------------------------------- +#define MAX_MEAS_RXLEV_IND_TRACE 10 +#define NB_FQ_TO_CHK 4 + +/*--------------------------------------------------------*/ +/* Max value for GSM Paging Parameters. */ +/*--------------------------------------------------------*/ +#define MAX_AG_BLKS_RES_NCOMB 7 +#define MAX_AG_BLKS_RES_COMB 2 +#define MAX_PG_BLOC_INDEX_NCOMB 8 +#define MAX_PG_BLOC_INDEX_COMB 2 +#define MAX_BS_PA_MFRMS 9 + +/*--------------------------------------------------------*/ +/* Position of different blocs in a MF51. */ +/*--------------------------------------------------------*/ +#define NBCCH_POSITION 2 // Normal BCCH position in a MF51. +#define EBCCH_POSITION 6 // Extended BCCH position in a MF51. +#define CCCH_0 6 +#define CCCH_1 12 +#define CCCH_2 16 +#define CCCH_3 22 +#define CCCH_4 26 +#define CCCH_5 32 +#define CCCH_6 36 +#define CCCH_7 42 +#define CCCH_8 46 +#define FB_0 0 +#define FB_1 10 +#define FB_2 20 +#define FB_3 30 +#define FB_4 40 +#define SB_0 1 +#define SB_1 11 +#define SB_2 21 +#define SB_3 31 +#define SB_4 41 + +/*--------------------------------------------------------*/ +/* System information position in the "si_bit_map". */ +/*--------------------------------------------------------*/ +#define SI_1 0x0001 +#define SI_2 0x0002 +#define SI_2BIS 0x0100 +#define SI_2TER 0x0200 +#define SI_3 0x0004 +#define SI_4 0x0008 +#define SI_7 0x0040 +#define SI_8 0x0080 +#define ALL_SI SI_1 | SI_2 | SI_2BIS | SI_2TER | SI_3 | SI_4 | SI_7 | SI_8 + +/*--------------------------------------------------------*/ +/* CBCH position in the "smscb_bit_map". */ +/*--------------------------------------------------------*/ +#define CBCH_TB1 0x0001 +#define CBCH_TB2 0x0002 +#define CBCH_TB3 0x0004 +#define CBCH_TB5 0x0008 +#define CBCH_TB6 0x0010 +#define CBCH_TB7 0x0020 + +#define CBCH_CONTINUOUS_READING 0 +#define CBCH_SCHEDULED 1 +#define CBCH_INACTIVE 2 + +/*--------------------------------------------------------*/ +/* Channel type definitions for DEDICATED mode. */ +/*--------------------------------------------------------*/ + +//TABLE/ CHAN TYPE +#define INVALID_CHANNEL 0 +#define TCH_F 1 +#define TCH_H 2 +#define SDCCH_4 3 +#define SDCCH_8 4 +//END_TABLE/ + +/*--------------------------------------------------------*/ +/* Channel mode definitions for DEDICATED. */ +/*--------------------------------------------------------*/ +#define SIG_ONLY_MODE 0 // signalling only +#define TCH_FS_MODE 1 // speech full rate +#define TCH_HS_MODE 2 // speech half rate +#define TCH_96_MODE 3 // data 9,6 kb/s +#define TCH_48F_MODE 4 // data 4,8 kb/s full rate +#define TCH_48H_MODE 5 // data 4,8 kb/s half rate +#define TCH_24F_MODE 6 // data 2,4 kb/s full rate +#define TCH_24H_MODE 7 // data 2,4 kb/s half rate +#define TCH_EFR_MODE 8 // enhanced full rate +#define TCH_144_MODE 9 // data 14,4 kb/s half rate +#if (AMR == 1) + #define TCH_AHS_MODE 10 // adaptative speech half rate + #define TCH_AFS_MODE 11 // adaptative speech full rate +#endif + + +/*--------------------------------------------------------*/ +/* Layer 1 functional modes for "mode" setting pupose. */ +/*--------------------------------------------------------*/ +#define CS_MODE0 0 // functional mode at reset. +#define CS_MODE 1 // functional mode in CELL SELECTION. +#define I_MODE 2 // functional mode in IDLE. +#define CON_EST_MODE1 3 // functional mode in ACCESS (before 1st RA, for TOA convergency). +#define CON_EST_MODE2 4 // functional mode in ACCESS (after 1st RA). +#define DEDIC_MODE 5 // functional mode in DEDICATED. +#define DEDIC_MODE_HALF_DATA 6 // used only for TOA histogram length purpose. +#if L1_GPRS + #define PACKET_TRANSFER_MODE 7 +#endif + +/*--------------------------------------------------------*/ +/* Error causes for MPHC_NO_BCCH message. */ +/*--------------------------------------------------------*/ +#define NO_FB_SB 0 // FB or SB not found. +#define NCC_NOT_PERMITTED 1 // Synchro OK! but PLMN not permitted. + +/*--------------------------------------------------------*/ +/* MFTAB constants and flags. */ +/*--------------------------------------------------------*/ +#define L1_MAX_FCT 5 /* Max number of fctions in a frame */ +#define MFTAB_SIZE 20 + +/********************************/ +/* Software register/flags */ +/* definitions. */ +/********************************/ +#define NO_CTRL (TRUE_L << 0) +#define CTRL_MS (TRUE_L << 1) +#define CTRL_TX (TRUE_L << 2) +#define CTRL_RX (TRUE_L << 3) +#define CTRL_ADC (TRUE_L << 4) +#define CTRL_SYNC (TRUE_L << 5) +#define CTRL_ABORT (TRUE_L << 6) +#define CTRL_TEST (TRUE_L << 7) +#define CTRL_SYCB (TRUE_L << 8) +#define CTRL_FB_ABORT (TRUE_L << 9) +#if L1_GPRS + #define CTRL_PRACH (TRUE_L << 10) + #define CTRL_SYSINGLE (TRUE_L << 11) +#endif + + +/********************************/ +/* MISC management */ +/********************************/ +#define GSM_CTL 0 // DSP ctrl for a GSM task +#define MISC_CTL 1 // DSP ctrl for a MISC task +#define GSM_MISC_CTL 2 // DSP ctrl for a GSM and MISC tasks + +/********************************/ +/* TOA management */ +/********************************/ +#define ISH_INVALID 128 // value used to disable the toa offset + +/********************************/ +/* AGC management */ +/********************************/ +#define DPAGC_FIFO_LEN 4 +#define DPAGC_MAX_FLAG 1 +#if (AMR == 1) + #define DPAGC_AMR_FIFO_LEN 4 +#endif + +/********************************/ +/* ADC management */ +/********************************/ +#define ADC_DISABLED 0x0000 + // Traffic part +#define ADC_MASK_RESET_TRAFFIC 0xFF00 +#define ADC_NEXT_TRAFFIC_UL 0x0001 +#define ADC_EACH_TRAFFIC_UL 0x0002 +#define ADC_NEXT_TRAFFIC_DL 0x0004 +#define ADC_EACH_TRAFFIC_DL 0x0008 +#define ADC_EACH_RACH 0x0010 + + + // Idle part +#define ADC_MASK_RESET_IDLE 0x00FF +#define ADC_NEXT_NORM_PAGING 0x0100 +#define ADC_EACH_NORM_PAGING 0x0200 +#define ADC_NEXT_MEAS_SESSION 0x0400 +#define ADC_EACH_MEAS_SESSION 0x0800 +#define ADC_NEXT_NORM_PAGING_REORG 0x1000 +#define ADC_EACH_NORM_PAGING_REORG 0x2000 + + + // CS_MODE0 part +#define ADC_NEXT_CS_MODE0 0x4000 +#define ADC_EACH_CS_MODE0 0x8000 + + +/********************************/ +/* Neighbor BCCH priorities */ +/********************************/ + +#define TOP_PRIORITY 0 +#define HIGH_PRIORITY 1 +#define NORMAL_PRIORITY 2 + +/********************************/ +/* Driver constants definitions */ +/********************************/ + +// Used to identify the 1st and last burst for offset management in Drivers. +#define BURST_1 0 +#define BURST_2 1 +#define BURST_3 2 +#define BURST_4 3 + + +// Identifier for all DSP tasks. +// ...RX & TX tasks identifiers. +#define NO_DSP_TASK 0 // No task. +#define NP_DSP_TASK 21 // Normal Paging reading task. +#define EP_DSP_TASK 22 // Extended Paging reading task. +#define NBS_DSP_TASK 19 // Normal BCCH serving reading task. +#define EBS_DSP_TASK 20 // Extended BCCH serving reading task. +#define NBN_DSP_TASK 17 // Normal BCCH neighbour reading task. +#define EBN_DSP_TASK 18 // Extended BCCH neighbour reading task. +#define ALLC_DSP_TASK 24 // CCCH reading task while performing FULL BCCH/CCCH reading task. +#define CB_DSP_TASK 25 // CBCH reading task. +#define DDL_DSP_TASK 26 // SDCCH/D (data) reading task. +#define ADL_DSP_TASK 27 // SDCCH/A (SACCH) reading task. +#define DUL_DSP_TASK 12 // SDCCH/D (data) transmit task. +#define AUL_DSP_TASK 11 // SDCCH/A (SACCH) transmit task. +#define RACH_DSP_TASK 10 // RACH transmit task. +#define TCHT_DSP_TASK 13 // TCH Traffic data DSP task id (RX or TX) +#define TCHA_DSP_TASK 14 // TCH SACCH data DSP task id (RX or TX) +#define TCHD_DSP_TASK 28 // TCH Traffic data DSP task id (RX or TX) + +#define TCH_DTX_UL 15 // Replace UL task in DSP->MCU com. to say "burst not transmitted". + +#if (L1_GPRS) + // Identifier for DSP tasks Packet dedicated. + // ...RX & TX tasks identifiers. + //------------------------------------------------------------------------ + // WARNING ... Need to aligned following macro with MCU/DSP GPRS Interface + //------------------------------------------------------------------------ + #define PNP_DSP_TASK 30 + #define PEP_DSP_TASK 31 + #define PALLC_DSP_TASK 32 + #define PBS_DSP_TASK 33 + + #define PTCCH_DSP_TASK 33 + +#endif + +// Identifier for measurement, FB / SB search tasks. +// Values 1,2,3 reserved for "number of measurements". +#define FB_DSP_TASK 5 // Freq. Burst reading task in Idle mode. +#define SB_DSP_TASK 6 // Sync. Burst reading task in Idle mode. +#define TCH_FB_DSP_TASK 8 // Freq. Burst reading task in Dedicated mode. +#define TCH_SB_DSP_TASK 9 // Sync. Burst reading task in Dedicated mode. +#define IDLE1 1 + +// Debug tasks +#define CHECKSUM_DSP_TASK 33 +#define TST_NDB 35 // Checksum DSP->MCU +#define TST_DB 36 // DB communication check +#define INIT_VEGA 37 +#define DSP_LOOP_C 38 + +// Identifier for measurement, FB / SB search tasks. +// Values 1,2,3 reserved for "number of measurements". +#define TCH_LOOP_A 31 +#define TCH_LOOP_B 32 + +#if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + #define SC_CHKSUM_VER (DB_W_PAGE_0 + (2 * (0x08DB - 0x800))) +#else + #define SC_CHKSUM_VER (DB_W_PAGE_0 + (2 * (0x09A0 - 0x800))) +#endif + +// bits in d_gsm_bgd_mgt - background task management +#define B_DSPBGD_RECO 1 // start of reco in dsp background +#define B_DSPBGD_UPD 2 // start of alignement update in dsp background +#define B_DSPBGD_STOP_RECO 256 // stop of reco in dsp background +#define B_DSPBGD_STOP_UPD 512 // stop of alignement update in dsp background + +// bit in d_pll_config +#define B_32KHZ_CALIB (TRUE_L << 14) // force DSP in Idle1 during 32 khz calibration +// **************************************************************** +// NDB AREA (PARAM) MCU<->DSP COMMUNICATION DEFINITIONS +// **************************************************************** +// bits in d_tch_mode +#define B_EOTD (TRUE_L << 0) // EOTD mode +#define B_PLAY_UL (TRUE_L << 3) // Play UL +#define B_DCO_ON (TRUE_L << 4) // DCO ON/OFF +#define B_AUDIO_ASYNC (TRUE_L << 1) // WCP reserved + +// **************************************************************** +// PARAMETER AREA (PARAM) MCU<->DSP COMMUNICATION DEFINITIONS +// **************************************************************** +#define C_POND_RED 1L +// below values are defined in the file l1_time.h +//#define D_NSUBB_IDLE 296L +//#define D_NSUBB_DEDIC 30L +#define D_FB_THR_DET_IACQ 0x3333L +#define D_FB_THR_DET_TRACK 0x28f6L +#define D_DC_OFF_THRES 0x7fffL +#define D_DUMMY_THRES 17408L +#define D_DEM_POND_GEWL 26624L +#define D_DEM_POND_RED 20152L +#define D_HOLE 0L +#define D_TRANSFER_RATE 0x6666L + +// Full Rate vocoder definitions. +#define D_MACCTHRESH1 7872L +#define D_MLDT -4L +#define D_MACCTHRESH 7872L +#define D_GU 5772L +#define D_GO 7872L +#define D_ATTMAX 53L +#define D_SM -892L +#define D_B 208L +#define D_SD_MIN_THR_TCHFS 15L //(24L *C_POND_RED) +#define D_MA_MIN_THR_TCHFS 738L //(1200L *C_POND_RED) +#define D_MD_MAX_THR_TCHFS 1700L //(2000L *C_POND_RED) +#define D_MD1_MAX_THR_TCHFS 99L //(160L *C_POND_RED) + +#if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + // Frequency burst definitions + #define D_FB_MARGIN_BEG 24 + #define D_FB_MARGIN_END 22 + + // V42bis definitions + #define D_V42B_SWITCH_HYST 16L + #define D_V42B_SWITCH_MIN 64L + #define D_V42B_SWITCH_MAX 250L + #define D_V42B_RESET_DELAY 10L + + // Latencies definitions + #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + // C.f. BUG1404 + #define D_LAT_MCU_BRIDGE 0x000FL + #else + #define D_LAT_MCU_BRIDGE 0x0009L + #endif + + #define D_LAT_MCU_HOM2SAM 0x000CL + + #define D_LAT_MCU_BEF_FAST_ACCESS 0x0005L + #define D_LAT_DSP_AFTER_SAM 0x0004L + + // Background Task in GSM mode: Initialization. + #define D_GSM_BGD_MGT 0L + +#if (CHIPSET == 4) + #define D_MISC_CONFIG 0L +#elif (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) + #define D_MISC_CONFIG 1L +#else + #define D_MISC_CONFIG 0L +#endif + +#endif + +// Hall Rate vocoder and ched definitions. + +#define D_SD_MIN_THR_TCHHS 37L +#define D_MA_MIN_THR_TCHHS 344L +#define D_MD_MAX_THR_TCHHS 2175L +#define D_MD1_MAX_THR_TCHHS 138L +#define D_SD_AV_THR_TCHHS 1845L +#define D_WED_FIL_TC 0x7c00L +#define D_WED_FIL_INI 4650L +#define D_X_MIN 15L +#define D_X_MAX 23L +#define D_Y_MIN 703L +#define D_Y_MAX 2460L +#define D_SLOPE 135L +#define D_WED_DIFF_THRESHOLD 406L +#define D_MABFI_MIN_THR_TCHHS 5320L +#define D_LDT_HR -5 +#define D_MACCTRESH_HR 6500 +#define D_MACCTRESH1_HR 6500 +#define D_GU_HR 2620 +#define D_GO_HR 3700 +#define D_B_HR 182 +#define D_SM_HR -1608 +#define D_ATTMAX_HR 53 + +// Enhanced Full Rate vocoder and ched definitions. + +#define C_MLDT_EFR -4 +#define C_MACCTHRESH_EFR 8000 +#define C_MACCTHRESH1_EFR 8000 +#define C_GU_EFR 4522 +#define C_GO_EFR 6500 +#define C_B_EFR 174 +#define C_SM_EFR -878 +#define C_ATTMAX_EFR 53 +#define D_SD_MIN_THR_TCHEFS 15L //(24L *C_POND_RED) +#define D_MA_MIN_THR_TCHEFS 738L //(1200L *C_POND_RED) +#define D_MD_MAX_THR_TCHEFS 1230L //(2000L *C_POND_RED) +#define D_MD1_MAX_THR_TCHEFS 99L //(160L *C_POND_RED) + + +// Integrated Data Services definitions. +#define D_MAX_OVSPD_UL 8 +// Detect frames containing 90% of 1s as synchro frames +#define D_SYNC_THRES 0x3f50 +// IDLE frames are only frames with 100 % of 1s +#define D_IDLE_THRES 0x4000 +#define D_M1_THRES 5 +#define D_MAX_OVSP_DL 8 + +// d_ra_act: bit field definition +#define B_F48BLK 5 + +// Mask for b_itc information (d_ra_conf) +#define CE_MASK 0x04 + +#define D_FACCH_THR 0 +#define D_DSP_TEST 0 +#define D_VERSION_NUMBER 0 +#define D_TI_VERSION 0 + + +/*------------------------------------------------------------------------------*/ +/* */ +/* DEFINITIONS FOR DSP <-> MCU COMMUNICATION. */ +/* ++++++++++++++++++++++++++++++++++++++++++ */ +/* */ +/*------------------------------------------------------------------------------*/ +// COMMUNICATION Interrupt definition +//------------------------------------ +#define ALL_16BIT 0xffffL +#define B_GSM_PAGE (TRUE_L << 0) +#define B_GSM_TASK (TRUE_L << 1) +#define B_MISC_PAGE (TRUE_L << 2) +#define B_MISC_TASK (TRUE_L << 3) + +#define B_GSM_PAGE_MASK (ALL_16BIT ^ B_GSM_PAGE) +#define B_GSM_TASK_MASK (ALL_16BIT ^ B_GSM_TASK) +#define B_MISC_PAGE_MASK (ALL_16BIT ^ B_MISC_PAGE) +#define B_MISC_TASK_MASK (ALL_16BIT ^ B_MISC_TASK) + +// Common definition +//---------------------------------- +// Index to *_DEMOD* arrays. +#define D_TOA 0 // Time Of Arrival. +#define D_PM 1 // Power Measurement. +#define D_ANGLE 2 // Angle (AFC correction) +#define D_SNR 3 // Signal / Noise Ratio. + +// Bit name/position definitions. +#define B_FIRE0 5 // Fire result bit 0. (00 -> NO ERROR) (01 -> ERROR CORRECTED) +#define B_FIRE1 6 // Fire result bit 1. (10 -> ERROR) (11 -> unused) +#define B_SCH_CRC 8 // CRC result for SB decoding. (1 for ERROR). +#define B_BLUD 15 // Uplink,Downlink data block Present. (1 for PRESENT). +#define B_AF 14 // Activity bit: 1 if data block is valid. +#define B_BFI 2 // Bad Frame Indicator +#define B_UFI 0 // UNRELIABLE FRAME Indicator +#define B_ECRC 9 // Enhanced full rate CRC bit +#define B_EMPTY_BLOCK 10 // for voice memo purpose, this bit is used to determine + +#if (DEBUG_DEDIC_TCH_BLOCK_STAT == 1) + #define FACCH_GOOD 10 + #define FACCH_BAD 11 +#endif + +#if (AMR == 1) + // Place of the RX type in the AMR block header + #define RX_TYPE_SHIFT 3 + #define RX_TYPE_MASK 0x0038 + + // Place of the vocoder type in the AMR block header + #define VOCODER_TYPE_SHIFT 0 + #define VOCODER_TYPE_MASK 0x0007 + + // List of the possible RX types in a_dd block + #define SPEECH_GOOD 0 + #define SPEECH_DEGRADED 1 + #define ONSET 2 + #define SPEECH_BAD 3 + #define SID_FIRST 4 + #define SID_UPDATE 5 + #define SID_BAD 6 + #define AMR_NO_DATA 7 + #define AMR_INHIBIT 8 + + // List of possible RX types in RATSCCH block + #define C_RATSCCH_GOOD 5 + + // List of the possible AMR channel rate + #define AMR_CHANNEL_4_75 0 + #define AMR_CHANNEL_5_15 1 + #define AMR_CHANNEL_5_9 2 + #define AMR_CHANNEL_6_7 3 + #define AMR_CHANNEL_7_4 4 + #define AMR_CHANNEL_7_95 5 + #define AMR_CHANNEL_10_2 6 + #define AMR_CHANNEL_12_2 7 + + // Types of RATSCCH blocks + #define C_RATSCCH_UNKNOWN 0 + #define C_RATSCCH_CMI_PHASE_REQ 1 + #define C_RATSCCH_AMR_CONFIG_REQ_MAIN 2 + #define C_RATSCCH_AMR_CONFIG_REQ_ALT 3 + #define C_RATSCCH_AMR_CONFIG_REQ_ALT_IGNORE 4 // Alternative AMR_CONFIG_REQ with updates coming in the next THRES_REQ block + #define C_RATSCCH_THRES_REQ 5 + + // These flags define a bitmap that indicates which AMR parameters are being modified by a RATSCCH + #define C_AMR_CHANGE_CMIP 0 + #define C_AMR_CHANGE_ACS 1 + #define C_AMR_CHANGE_ICM 2 + #define C_AMR_CHANGE_THR1 3 + #define C_AMR_CHANGE_THR2 4 + #define C_AMR_CHANGE_THR3 5 + #define C_AMR_CHANGE_HYST1 6 + #define C_AMR_CHANGE_HYST2 7 + #define C_AMR_CHANGE_HYST3 8 + + // CMIP default value + #define C_AMR_CMIP_DEFAULT 1 // According to ETSI specification 05.09, cmip is always 1 by default (new channel, handover...) + +#endif +// "d_ctrl_tch" bits positions for TCH configuration. +#define B_CHAN_MODE 0 +#define B_CHAN_TYPE 4 +#define B_RESET_SACCH 6 +#define B_VOCODER_ON 7 +#define B_SYNC_TCH_UL 8 +#if (AMR == 1) + #define B_SYNC_AMR 9 +#else +#define B_SYNC_TCH_DL 9 +#endif +#define B_STOP_TCH_UL 10 +#define B_STOP_TCH_DL 11 +#define B_TCH_LOOP 12 +#define B_SUBCHANNEL 15 + +// "d_ctrl_abb" bits positions for conditionnal loading of abb registers. +#define B_RAMP 0 +#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) + #define B_BULRAMPDEL 3 // Note: this name is changed + #define B_BULRAMPDEL2 2 // Note: this name is changed + #define B_BULRAMPDEL_BIS 9 + #define B_BULRAMPDEL2_BIS 10 +#endif +#define B_AFC 4 + +// "d_ctrl_system" bits positions. +#define B_TSQ 0 +#define B_BCCH_FREQ_IND 3 +#define B_TASK_ABORT 15 // Abort RF tasks for DSP. + +/* + * FreeCalypso Frankenstein: the following definition has been + * imported from LoCosto version of l1_const.h; it is needed for + * the LoCosto-based C code to compile. + */ +#define C_BA_PM_MEAS (2) + +// **************************************************************** +// POLESTAR EVABOARD 3 REGISTERS & ADRESSES DEFINITIONS +// **************************************************************** + + + // DSP ADRESSES + //-------------------- + + #define DB_SIZE (4*20L) // 4 pages of 20 words... + + #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + #define DB_W_PAGE_0 0xFFD00000L // DB page 0 write : 20 words long + #define DB_W_PAGE_1 0xFFD00028L // DB page 1 write : 20 words long + #define DB_R_PAGE_0 0xFFD00050L // DB page 0 read : 20 words long + #define DB_R_PAGE_1 0xFFD00078L // DB page 1 read : 20 words long + #define NDB_ADR 0xFFD001A8L // NDB start address : 268 words + #define PARAM_ADR 0xFFD00862L // PARAM start address : 57 words + + #if (DSP_DEBUG_TRACE_ENABLE == 1) + #define DB2_R_PAGE_0 0xFFD00184L + #define DB2_R_PAGE_1 0xFFD00188L + #endif + #else + #define DB_W_PAGE_0 0xFFD00000L // DB page 0 write : 20 words long + #define DB_W_PAGE_1 0xFFD00028L // DB page 1 write : 20 words long + #define DB_R_PAGE_0 0xFFD00050L // DB page 0 read : 20 words long + #define DB_R_PAGE_1 0xFFD00078L // DB page 1 read : 20 words long + #define NDB_ADR 0xFFD000a0L // NDB start address : 268 words + #define PARAM_ADR 0xFFD002b8L // PARAM start address : 57 words + #endif + +// **************************************************************** +// ADC reading definitions +// **************************************************************** + +#define ADC_READ_PERIOD (40) //30 * 4.615 = 140ms + + +// **************************************************************** +// AGC: IL table identifier used by function Cust_get_agc_from_IL +// **************************************************************** +#define MAX_ID 1 +#define AV_ID 2 +#define PWR_ID 3 + +#if TESTMODE + // **************************************************************** + // Testmode: State of the continous mode + // **************************************************************** + #define TM_NO_CONTINUOUS 1 // continuous mode isn't active + #define TM_START_RX_CONTINUOUS 2 // start the Rx continuous mode + #define TM_START_TX_CONTINUOUS 3 // start the Tx continuous mode + #define TM_CONTINUOUS 4 // Rx or Tx continuous mode +#endif +#if (AMR == 1) + // **************************************************************** + // AMR: Position of each AMR parameters in the AMR API buffer + // **************************************************************** + #define NSCB_INDEX 0 + #define NSCB_SHIFT 6 + #define ICMUL_INDEX 0 + #define ICMUL_SHIFT 4 + #define ICMDL_INDEX 0 + #define ICMDL_SHIFT 1 + #define ICMIUL_INDEX 0 + #define ICMIUL_SHIFT 3 + #define ICMIDL_INDEX 0 + #define ICMIDL_SHIFT 0 + #define ACSUL_INDEX 1 + #define ACSUL_SHIFT 0 + #define ACSDL_INDEX 1 + #define ACSDL_SHIFT 8 + #define THR1_INDEX 2 + #define THR1_SHIFT 0 + #define THR2_INDEX 2 + #define THR2_SHIFT 6 + #define THR3_INDEX 3 + #define THR3_SHIFT 8 + #define HYST1_INDEX 3 + #define HYST1_SHIFT 0 + #define HYST2_INDEX 3 + #define HYST2_SHIFT 4 + #define HYST3_INDEX 2 + #define HYST3_SHIFT 12 + #define NSYNC_INDEX 3 + #define NSYNC_SHIFT 14 + #define CMIP_INDEX 3 + #define CMIP_SHIFT 15 + + #define NSCB_MASK 0x0001 + #define ICM_MASK 0x0003 + #define ICMI_MASK 0x0001 + #define ACS_MASK 0x00FF + #define THR_MASK 0x003F + #define HYST_MASK 0x000F + #define CMIP_MASK 0x0001 +#endif +