view src/gpf/frame/vsi_pro.c @ 51:04aaa5622fa7

disable deep sleep when Iota LEDB is on TI's Iota chip docs say that CLK13M must be running in order for LEDB to work, and practical experience on Mot C139 which uses Iota LEDB for its keypad backlight concurs: if Calypso enters deep sleep while the keypad backlight is turned on, the light flickers visibly as the chipset goes into and out of deep sleep. TI's original L1 sleep manager code had logic to disable deep sleep when LT_Status() returns nonzero, but that function only works for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no check of Iota LEDB status anywhere. Change this code for our current hardware: disable deep sleep when Iota LEDB has been turned on through LLS.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Oct 2020 05:11:29 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       vsi_pro.c
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Module defines the virtual system interface part
|             about the processes
+----------------------------------------------------------------------------- 
*/ 

#ifndef __VSI_PRO_C__
#define __VSI_PRO_C__
#endif


/*==== INCLUDES ===================================================*/

#include "string.h"
#include "typedefs.h"
#include "os.h"
#include "vsi.h"
#include "frm_defs.h"
#include "frm_types.h"
#include "frm_glob.h"
#include "frame.h"
#include "route.h"

/*==== TYPES ======================================================*/


/*==== CONSTANTS ==================================================*/


/*==== EXTERNALS ==================================================*/

/* -------------- S H A R E D - BEGIN ---------------- */
#ifdef _TOOLS_
#pragma data_seg("FRAME_SHARED") 
#endif

extern void pf_TaskEntry(T_HANDLE, ULONG);

/*==== VARIABLES ==================================================*/

#ifdef _TOOLS_
#pragma data_seg()
#endif
/* -------------- S H A R E D - END ---------------- */

/*==== FUNCTIONS ==================================================*/


#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_create        |
+--------------------------------------------------------------------+

  PURPOSE : creates a process

*/

T_HANDLE vsi_p_create (T_HANDLE Caller, SHORT (*pei_create)(T_PEI_INFO const ** info), 
                    void (*TaskEntry)(T_HANDLE, ULONG), T_HANDLE MemPoolHandle )
{
void (*EntryFunc)(T_HANDLE, ULONG);
T_PEI_INFO const *Info;
T_HANDLE TaskHandle;

  if ( pei_create ( &Info ) == PEI_OK )
  {
    if ( TaskEntry == NULL )
      EntryFunc = pf_TaskEntry;
    else
      EntryFunc = TaskEntry;

    if ( os_CreateTask (NO_TASK, (char*)Info->Name, EntryFunc, Info->StackSize, Info->Priority, 
                        &TaskHandle, MemPoolHandle) == OS_OK )
    {
      pf_TaskTable[TaskHandle].Flags = Info->Flags;
      pf_TaskTable[TaskHandle].PeiTable = &Info->PeiTable;
      pf_TaskTable[TaskHandle].QueueEntries = Info->QueueEntries;
      pf_TaskTable[TaskHandle].NumOfTimers = Info->NumOfTimers;
      strncpy (pf_TaskTable[TaskHandle].Name, Info->Name, RESOURCE_NAMELEN);
      pf_TaskTable[TaskHandle].Name[RESOURCE_NAMELEN-1] = 0;
      pf_TaskTable[TaskHandle].TaskHandle = TaskHandle;

      pf_TaskTable[TaskHandle].MemPoolHandle = MemPoolHandle;
      return TaskHandle;
    }
  }
  return VSI_ERROR;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_exit          |
+--------------------------------------------------------------------+

  PURPOSE : exits and deletes a process

*/
#undef VSI_CALLER
#define VSI_CALLER Caller,
#define VSI_CALLER_SINGLE Caller
int vsi_p_exit (T_HANDLE Caller, T_HANDLE TaskHandle)
{
ULONG old_mask;
T_PRIM_HEADER *prim;
T_S_HEADER *s_hdr;
ULONG size;
char name[RESOURCE_NAMELEN];

  size = S_ALLOC_SIZE(strlen(SYSPRIM_EXIT_TOKEN));
#ifdef MEMORY_SUPERVISION
  prim = (T_PRIM_HEADER*)vsi_c_new ( Caller, size, 0, __FILE__, __LINE__ );
#else
  prim = (T_PRIM_HEADER*)vsi_c_new ( Caller, size, 0 );
#endif

  prim->opc = SYS_MASK;
  prim->sh_offset = S_HDR_OFFSET(size - sizeof(T_S_HEADER));
  prim->len = strlen(SYSPRIM_EXIT_TOKEN) + sizeof(T_PRIM_HEADER);
  s_hdr = (T_S_HEADER*)((ULONG*)prim + prim->sh_offset);
  s_hdr->snd[0] =(char)Caller;
  strcpy((char*)P2D(prim),SYSPRIM_EXIT_TOKEN);

  if (vsi_gettaskname(Caller,TaskHandle,name) < VSI_OK) 
  {
    return VSI_ERROR;
  }
  /* switch off tracing for Caller */
  vsi_gettracemask ( Caller, Caller, &old_mask);
  vsi_settracemask ( Caller, Caller, 0);
  PSEND(vsi_c_open(Caller,name),P2D(prim));
  /* set tracing to old value for Caller */
  vsi_settracemask ( Caller, Caller, old_mask);
  return VSI_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_delete        |
+--------------------------------------------------------------------+

  PURPOSE : deletes a process

*/

int vsi_p_delete (T_HANDLE Caller, T_HANDLE TaskHandle)
{
  rt_RoutingModify ( TaskHandle, (char*)SYSPRIM_REDIRECT_TOKEN, (char*)SYSPRIM_CLEAR_TOKEN );

  if ( os_DestroyQueue ( Caller, pf_TaskTable[TaskHandle].QueueHandle ) != OS_OK )
    return VSI_ERROR;

  memset ( &pf_TaskTable[TaskHandle], 0, sizeof (T_FRM_TASK_TABLE_ENTRY) );

  if ( os_DestroyTask ( Caller, TaskHandle ) != OS_OK )
    return VSI_ERROR;

  return VSI_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_start         |
+--------------------------------------------------------------------+

  PURPOSE : starts a process

*/

int vsi_p_start (T_HANDLE Caller, T_HANDLE TaskHandle)
{

  if ( os_StartTask ( Caller, TaskHandle, 0 ) == OS_OK )
    return VSI_OK;
  else
    return VSI_ERROR;

}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_stop          |
+--------------------------------------------------------------------+

  PURPOSE : stops a process

*/

int vsi_p_stop (T_HANDLE Caller, T_HANDLE TaskHandle)
{

  if ( os_StopTask ( Caller, TaskHandle ) == OS_OK )
    return VSI_OK;
  else
    return VSI_ERROR;

}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_name          |
+--------------------------------------------------------------------+

  PURPOSE : reads the name of a task

*/

int vsi_p_name (T_HANDLE Caller, T_HANDLE Handle, char *Name)
{

  if ( os_GetTaskName ( Caller, Handle, Name ) != OS_ERROR )
    return VSI_OK;

  return VSI_ERROR;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_handle        |
+--------------------------------------------------------------------+

  PURPOSE : reads the name of a task

*/

T_HANDLE vsi_p_handle (T_HANDLE Caller, char *Name)
{
OS_HANDLE Handle;

  if ( os_GetTaskHandle ( Caller, Name, &Handle ) != OS_ERROR )
    return Handle;

  return VSI_ERROR;
}
#endif