view src/gpf/frame/vsi_pro.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       vsi_pro.c
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Module defines the virtual system interface part
|             about the processes
+----------------------------------------------------------------------------- 
*/ 

#ifndef __VSI_PRO_C__
#define __VSI_PRO_C__
#endif


/*==== INCLUDES ===================================================*/

#include "string.h"
#include "typedefs.h"
#include "os.h"
#include "vsi.h"
#include "frm_defs.h"
#include "frm_types.h"
#include "frm_glob.h"
#include "frame.h"
#include "route.h"

/*==== TYPES ======================================================*/


/*==== CONSTANTS ==================================================*/


/*==== EXTERNALS ==================================================*/

/* -------------- S H A R E D - BEGIN ---------------- */
#ifdef _TOOLS_
#pragma data_seg("FRAME_SHARED") 
#endif

extern void pf_TaskEntry(T_HANDLE, ULONG);

/*==== VARIABLES ==================================================*/

#ifdef _TOOLS_
#pragma data_seg()
#endif
/* -------------- S H A R E D - END ---------------- */

/*==== FUNCTIONS ==================================================*/


#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_create        |
+--------------------------------------------------------------------+

  PURPOSE : creates a process

*/

T_HANDLE vsi_p_create (T_HANDLE Caller, SHORT (*pei_create)(T_PEI_INFO const ** info), 
                    void (*TaskEntry)(T_HANDLE, ULONG), T_HANDLE MemPoolHandle )
{
void (*EntryFunc)(T_HANDLE, ULONG);
T_PEI_INFO const *Info;
T_HANDLE TaskHandle;

  if ( pei_create ( &Info ) == PEI_OK )
  {
    if ( TaskEntry == NULL )
      EntryFunc = pf_TaskEntry;
    else
      EntryFunc = TaskEntry;

    if ( os_CreateTask (NO_TASK, (char*)Info->Name, EntryFunc, Info->StackSize, Info->Priority, 
                        &TaskHandle, MemPoolHandle) == OS_OK )
    {
      pf_TaskTable[TaskHandle].Flags = Info->Flags;
      pf_TaskTable[TaskHandle].PeiTable = &Info->PeiTable;
      pf_TaskTable[TaskHandle].QueueEntries = Info->QueueEntries;
      pf_TaskTable[TaskHandle].NumOfTimers = Info->NumOfTimers;
      strncpy (pf_TaskTable[TaskHandle].Name, Info->Name, RESOURCE_NAMELEN);
      pf_TaskTable[TaskHandle].Name[RESOURCE_NAMELEN-1] = 0;
      pf_TaskTable[TaskHandle].TaskHandle = TaskHandle;

      pf_TaskTable[TaskHandle].MemPoolHandle = MemPoolHandle;
      return TaskHandle;
    }
  }
  return VSI_ERROR;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_exit          |
+--------------------------------------------------------------------+

  PURPOSE : exits and deletes a process

*/
#undef VSI_CALLER
#define VSI_CALLER Caller,
#define VSI_CALLER_SINGLE Caller
int vsi_p_exit (T_HANDLE Caller, T_HANDLE TaskHandle)
{
ULONG old_mask;
T_PRIM_HEADER *prim;
T_S_HEADER *s_hdr;
ULONG size;
char name[RESOURCE_NAMELEN];

  size = S_ALLOC_SIZE(strlen(SYSPRIM_EXIT_TOKEN));
#ifdef MEMORY_SUPERVISION
  prim = (T_PRIM_HEADER*)vsi_c_new ( Caller, size, 0, __FILE__, __LINE__ );
#else
  prim = (T_PRIM_HEADER*)vsi_c_new ( Caller, size, 0 );
#endif

  prim->opc = SYS_MASK;
  prim->sh_offset = S_HDR_OFFSET(size - sizeof(T_S_HEADER));
  prim->len = strlen(SYSPRIM_EXIT_TOKEN) + sizeof(T_PRIM_HEADER);
  s_hdr = (T_S_HEADER*)((ULONG*)prim + prim->sh_offset);
  s_hdr->snd[0] =(char)Caller;
  strcpy((char*)P2D(prim),SYSPRIM_EXIT_TOKEN);

  if (vsi_gettaskname(Caller,TaskHandle,name) < VSI_OK) 
  {
    return VSI_ERROR;
  }
  /* switch off tracing for Caller */
  vsi_gettracemask ( Caller, Caller, &old_mask);
  vsi_settracemask ( Caller, Caller, 0);
  PSEND(vsi_c_open(Caller,name),P2D(prim));
  /* set tracing to old value for Caller */
  vsi_settracemask ( Caller, Caller, old_mask);
  return VSI_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_delete        |
+--------------------------------------------------------------------+

  PURPOSE : deletes a process

*/

int vsi_p_delete (T_HANDLE Caller, T_HANDLE TaskHandle)
{
  rt_RoutingModify ( TaskHandle, (char*)SYSPRIM_REDIRECT_TOKEN, (char*)SYSPRIM_CLEAR_TOKEN );

  if ( os_DestroyQueue ( Caller, pf_TaskTable[TaskHandle].QueueHandle ) != OS_OK )
    return VSI_ERROR;

  memset ( &pf_TaskTable[TaskHandle], 0, sizeof (T_FRM_TASK_TABLE_ENTRY) );

  if ( os_DestroyTask ( Caller, TaskHandle ) != OS_OK )
    return VSI_ERROR;

  return VSI_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_start         |
+--------------------------------------------------------------------+

  PURPOSE : starts a process

*/

int vsi_p_start (T_HANDLE Caller, T_HANDLE TaskHandle)
{

  if ( os_StartTask ( Caller, TaskHandle, 0 ) == OS_OK )
    return VSI_OK;
  else
    return VSI_ERROR;

}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_stop          |
+--------------------------------------------------------------------+

  PURPOSE : stops a process

*/

int vsi_p_stop (T_HANDLE Caller, T_HANDLE TaskHandle)
{

  if ( os_StopTask ( Caller, TaskHandle ) == OS_OK )
    return VSI_OK;
  else
    return VSI_ERROR;

}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_name          |
+--------------------------------------------------------------------+

  PURPOSE : reads the name of a task

*/

int vsi_p_name (T_HANDLE Caller, T_HANDLE Handle, char *Name)
{

  if ( os_GetTaskName ( Caller, Handle, Name ) != OS_ERROR )
    return VSI_OK;

  return VSI_ERROR;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_PRO             |
| STATE   : code                       ROUTINE : vsi_p_handle        |
+--------------------------------------------------------------------+

  PURPOSE : reads the name of a task

*/

T_HANDLE vsi_p_handle (T_HANDLE Caller, char *Name)
{
OS_HANDLE Handle;

  if ( os_GetTaskHandle ( Caller, Name, &Handle ) != OS_ERROR )
    return Handle;

  return VSI_ERROR;
}
#endif