view src/g23m-aci/aci/psa_simf.c @ 220:0ed36de51973

ABB semaphore protection overhaul The ABB semaphone protection logic that came with TCS211 from TI was broken in several ways: * Some semaphore-protected functions were called from Application_Initialize() context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with NU_INVALID_SUSPEND in this context, but the return value wasn't checked, and NU_Release_Semaphore() would be called unconditionally at the end. The latter call would increment the semaphore count past 1, making the semaphore no longer binary and thus no longer effective for resource protection. The fix is to check the return value from NU_Obtain_Semaphore() and skip the NU_Release_Semaphore() call if the semaphore wasn't properly obtained. * Some SPI hardware manipulation was being done before entering the semaphore- protected critical section. The fix is to reorder the code: first obtain the semaphore, then do everything else. * In the corner case of L1/DSP recovery, l1_abb_power_on() would call some non-semaphore-protected ABB & SPI init functions. The fix is to skip those calls in the case of recovery. * A few additional corner cases existed, all of which are fixed by making ABB semaphore protection 100% consistent for all ABB functions and code paths. There is still one remaining problem of priority inversion: suppose a low- priority task calls an ABB function, and some medium-priority task just happens to preempt right in the middle of that semaphore-protected ABB operation. Then the high-priority SPI task is locked out for a non-deterministic time until that medium-priority task finishes its work and goes back to sleep. This priority inversion problem remains outstanding for now.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 20:55:25 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_SIMF
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the functions for the protocol
|             stack adapter for the subscriber identity module.
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_SIMF_C
#define PSA_SIMF_C
#endif

#include "aci_all.h"

#undef TRACING

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci.h"
#include "psa.h"
#include "psa_sim.h"
#include "psa_util.h"

#ifdef UART
#include "dti.h"
#include "dti_conn_mng.h"
#endif

#ifdef SIM_TOOLKIT
#include "psa_cc.h"
#include "psa_sat.h"
#include "aci_fd.h" /* necessary for cmh.h */
#include "cmh.h"    /* necessary for cmh_sat.h */
#include "cmh_sat.h"
#include "cmh_sim.h"
#endif /* SIM_TOOLKIT */

/*==== CONSTANTS ==================================================*/

#ifdef TRACING
#define ITM_WDT         (14)    /* item width in chars */
#define HDR_WDT         (10)    /* header width in chars */
#endif /* TRACING */

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : SAT                     |
|                                 ROUTINE : psaSIM_ChkSIMSrvSup     |
+-------------------------------------------------------------------+

  PURPOSE : Check if the SIM service is supported or not.

*/

GLOBAL BOOL psaSIM_ChkSIMSrvSup( UBYTE srvNr )
{
  srvNr--;

  if( srvNr/4 >= SRV_TAB_LEN ) return ( FALSE );

  if( ((simShrdPrm.srvTab[srvNr/4] >> ((srvNr%4)*2))&0x03) EQ
         SRV_ALLOC_ACTIV )

    return( TRUE );

  return( FALSE );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_atbNewEntry      |
+-------------------------------------------------------------------+

  PURPOSE : returns the access table index for an entry that is
            free to use. -1 indicates that the access table is full.
*/

GLOBAL SHORT psaSIM_atbNewEntry ( void )
{
  SHORT atbIdx;             /* holds access table index */

  for( atbIdx = 0; atbIdx < ACC_MAX; atbIdx++ )
  {
    if( simShrdPrm.atb[atbIdx].ntryUsdFlg EQ FALSE )
    {
      psaSIM_InitAtbNtry( atbIdx );

#if defined _SIMULATION_
      TRACE_EVENT_P1("SIM table ID = %d", atbIdx);
#endif
      return( atbIdx );
    }
  }

  TRACE_ERROR("[psaSIM_atbNewEntry]: did not find a new SIM table entry");
  return( -1 );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_CloseAtb         |
+-------------------------------------------------------------------+

  PURPOSE : close all ATB entries with the provided SIM error code.

*/

GLOBAL void psaSIM_CloseAtb ( USHORT error )
{
  int atbIdx;             /* holds access table index */

  for( atbIdx = 0; atbIdx < ACC_MAX; atbIdx++ )
  {
    if( simShrdPrm.atb[atbIdx].ntryUsdFlg )
    {
      simShrdPrm.atb[atbIdx].errCode = error;

      if( simShrdPrm.atb[atbIdx].rplyCB )
        simShrdPrm.atb[atbIdx].rplyCB( (SHORT)atbIdx );

      simShrdPrm.atb[atbIdx].ntryUsdFlg = FALSE;
    }
  }
}
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_InitAtbNtry      |
+-------------------------------------------------------------------+

  PURPOSE : initialize the indexed access table entry.

*/

GLOBAL void psaSIM_InitAtbNtry ( SHORT idx )
{

/*
 *-------------------------------------------------------------------
 * initialize access table entry
 *-------------------------------------------------------------------
 */
  simShrdPrm.atb[idx].ntryUsdFlg  = FALSE;
  simShrdPrm.atb[idx].accType     = NO_VLD_ACT;
  simShrdPrm.atb[idx].v_path_info = FALSE;
  simShrdPrm.atb[idx].reqDataFld  = 0;
  simShrdPrm.atb[idx].dataOff     = 0;
  simShrdPrm.atb[idx].recNr       = 0;
  simShrdPrm.atb[idx].check_dataLen = FALSE;  /* in case of read record operation,
     datalen passed to SIM in the rquest will always be 0xFF. However when a buffer
     has been passed, the size of data received from SIM to be copied in it has to
     be checked...*/
  simShrdPrm.atb[idx].dataLen     = 0;
  simShrdPrm.atb[idx].exchData    = NULL;
  simShrdPrm.atb[idx].recMax      = 0;
  simShrdPrm.atb[idx].errCode     = SIM_NO_ERROR;
  simShrdPrm.atb[idx].rplyCB      = NULL;
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_cnvrtIMSI2ASCII  |
+-------------------------------------------------------------------+

  PURPOSE : converts the IMSI into ASCII representation and returns
            pointer to IMSI ASCII string.
*/

GLOBAL CHAR* psaSIM_cnvrtIMSI2ASCII ( CHAR * imsiBuf )
{
  psaSIM_decodeIMSI (  simShrdPrm.imsi.field, 
                       simShrdPrm.imsi.c_field, 
                       imsiBuf);
  return( imsiBuf );
}


/*
  PURPOSE : convert imsi (packed bcd to ASCIIZ; ->11.11)
*/
GLOBAL void psaSIM_decodeIMSI (UBYTE* imsi_field, 
                               UBYTE  imsi_c_field, 
                               CHAR* imsi_asciiz)
{
  UBYTE imsi_len;
  UBYTE i;
  UBYTE digit;

  TRACE_FUNCTION ("aci_slock_sim_decodeIMSI()");

  /*
                     | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
                     +---+---+---+---+---+---+---+---+
     imsi_c_field  = |         Length indicator      |
     imsi_field[0] = | IMSI digit 1  | p | 0 | 0 | 1 |
     imsi_field[1] = | IMSI digit 3  | IMSI digit 2  |
                    

     imsi_c_field = length indicator:
                    The length indicator refers to the number of significant bytes,
                    not including this length byte, required for the IMSI.
     p = parity
         0: Even number of IMSI digits
         1: Odd number of IMSI digits

     If the number of IMSI digits is even then bits 5 to 8 of the last octet
     shall be filled with an end mark coded as 1111b
   */

  /*
   * Check length
   */
  if ((imsi_c_field EQ 0) OR (imsi_c_field > (MAX_IMSI-1)))  /* maybe 0xFF on some testcards */
  {
    TRACE_EVENT_P1("[WRN] imsi_c_field = %d is not valid", imsi_c_field);
    imsi_asciiz[0] = '\0';    /* return empty string in case of error */
    return;
  }

  /*
   * calculate number of digits
   */
  imsi_len = (imsi_c_field)*2-1;   /* -1 goes off for parity nibble */

  /*
   * if even number of digits then last upper nibble is an end mark '1111'
   */
  if ((imsi_field[0] & 0x08) EQ 0)
  {
    imsi_len--;
  }

  /*
   * extract all digits
   */
  for (i=0; i<imsi_len; i++)
  {
    if ((i & 1) EQ 0)
    {
      /* process IMSI digit 1,3,5,... at i=0,2,4,...*/
      digit = (imsi_field[(i+1)/2] & 0xf0) >> 4;   /* +1 is to skip parity nibble */
    }
    else
    {
      /* process IMSI digit 2,4,6,... at i=1,3,5,...*/
      digit = (imsi_field[(i+1)/2] & 0x0f); 
    }

    if (digit > 9)  /* 3.03/2.3 IMSI shall consist of numerical characters (0 through 9) only.*/
    {
      TRACE_EVENT("[WRN] invalid BCD digit found in IMSI, aborting");
      imsi_asciiz[0] = '\0';    /* return empty string in case of error */
      return;
    }
    else
    {
      imsi_asciiz[i] = '0' + digit;
    }
  }
  imsi_asciiz[i] = '\0';
  return;
}

/*
  PURPOSE : convert imsi (ASCIIZ to packed bcd; ->11.11)
*/
GLOBAL void psaSIM_encodeIMSI (CHAR* imsi_asciiz, 
                               UBYTE* imsi_c_field, 
                               UBYTE* imsi_field)
{
  UBYTE i;
  UBYTE digit;
  UBYTE imsi_len;

  TRACE_FUNCTION ("aci_slock_sim_encodeIMSI()");
  imsi_len = strlen(imsi_asciiz);
  if (imsi_len > 15) /* 3.03/2.3 The overall number of digits in IMSI shall not exceed 15 digits. */
  {
    TRACE_EVENT_P1("[WRN] imsi_len shall not exceed 15 digits, but is %d, truncating!", imsi_len);
    imsi_len = 15;
  }

  /* Calculate the Length indicator */
  *imsi_c_field = (imsi_len+1+1)/2;          /* +1 for parity nibble and +1 to round up */
  imsi_field[0] = (imsi_len%2 ? 0x09:0x01);  /* fill parity and some default bits */
  for (i=0; i<MAX_IMSI_LEN; i++)             /* fill the whole EF field, pad remaining with 0xf */
  {
    if (i<imsi_len)
    {
      digit = imsi_asciiz[i];
      if (digit >= '0' OR digit <= '9')
      {
        digit-= '0';
      }
      else
      {
        TRACE_EVENT_P1("[WRN] invalid digit in IMSI \"%d\", skipping!", digit);
        digit = 0x0f;
      }
    }
    else
    {
      digit = 0x0f;   /* 11.11/10.3.2 If a network operator chooses an IMSI of less than 15 digits,
                          unused nibbles shall be set to 'F'. */
    }

    if ((i & 1) EQ 0)
    {
      /* process IMSI digit 1,3,5,... at i=0,2,4,...*/
      imsi_field[(i+1)/2] |= digit << 4;           /* first +1 is to skop parity nibble */
    }
    else
    {
      /* process IMSI digit 2,4,6,... at i=1,3,5,...*/
      imsi_field[(i+1)/2]  = digit;
    }
  }
}




/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIM                 |
|                                 ROUTINE : psaSIM_Init             |
+-------------------------------------------------------------------+

  PURPOSE : initialize the protocol stack adapter for SIM.

*/

/* MACRO: initializer for set parameter */
#define INIT_SIM_SET_PARM( dest, def )\
  for( LpCnt = 0; LpCnt < OWN_SRC_MAX; LpCnt++ )\
    simShrdPrm.setPrm[LpCnt].dest = def

GLOBAL void psaSIM_Init (T_ACI_INIT_TYPE init_type)
{
  UBYTE LpCnt;          /* holds loop counter for macro */
  UBYTE atbIdx;         /* holds index to access table */

#ifdef SIM_TOOLKIT
  T_ACI_CMD_SRC cmd_src;  /* for setting up SIMEF mode */
  UBYTE idx;            /* holds profile index */
#endif

/*
 *-------------------------------------------------------------------
 * initialize access table
 *-------------------------------------------------------------------
 */
  for( atbIdx = 0; atbIdx < ACC_MAX; atbIdx++ )
  {
    psaSIM_InitAtbNtry( atbIdx );
  }

/*
 *-------------------------------------------------------------------
 * set default parms
 *-------------------------------------------------------------------
 */
  memset( simShrdPrm.setPrm, 0, sizeof(T_SIM_SET_PRM));
  memset( simShrdPrm.imsi.field, 0, MAX_IMSI);
  simShrdPrm.rslt          = SIM_NO_ERROR;
  simShrdPrm.pn1Cnt        = 0;
  simShrdPrm.pn2Cnt        = 0;
  simShrdPrm.pk1Cnt        = 0;
  simShrdPrm.pk2Cnt        = 0;
  simShrdPrm.PINStat       = NO_VLD_PS;
  simShrdPrm.pn1Stat       = NO_VLD_PS;
  simShrdPrm.pn2Stat       = NO_VLD_PS;
  simShrdPrm.PINQuery      = 0;
  simShrdPrm.crdPhs        = 0xFF;
  simShrdPrm.SIMStat       = NO_VLD_SS;
  simShrdPrm.PEDStat       = NO_VLD_PEDS;
  simShrdPrm.imsi.c_field  = 0;
  simShrdPrm.PLMN_Mode_Bit = NOT_PRESENT_8BIT;
  simShrdPrm.crdFun        = SIM_NO_OPERATION;
  simShrdPrm.ciSIMEnabled  = TRUE;
  simShrdPrm.imei_blocked  = FALSE;
  simShrdPrm.opl_list.opl_status = FALSE;
  simShrdPrm.pnn_list.pnn_status = FALSE;
  memset( simShrdPrm.srvTab, 0, SRV_TAB_LEN );
#ifdef FF_SAT_E
  simShrdPrm.sat_class_e_dti_id = DTI_DTI_ID_NOTPRESENT;
#endif /*FF_SAT_E*/
#ifdef TI_PS_FF_AT_P_CMD_ATR
  simShrdPrm.atr.len       = 0;
#endif /* TI_PS_FF_AT_P_CMD_ATR */
#ifdef FF_DUAL_SIM
  simShrdPrm.SIM_Powered_on = 0;
  simShrdPrm.SIM_Selection = FALSE;
#endif /*FF_DUAL_SIM*/
  INIT_SIM_SET_PARM( actProc,    SIM_INITIALISATION );
  INIT_SIM_SET_PARM( PINType,    0 );
  
  for( LpCnt = 0; LpCnt < OWN_SRC_MAX; LpCnt++ )
  {
    memset( simShrdPrm.setPrm[LpCnt].curPIN, NOT_PRESENT_CHAR, PIN_LEN );
    memset( simShrdPrm.setPrm[LpCnt].newPIN, NOT_PRESENT_CHAR, PIN_LEN );
    memset( simShrdPrm.setPrm[LpCnt].unblkKey, NOT_PRESENT_CHAR, PUK_LEN );

#ifdef TI_PS_FF_AT_P_CMD_CUST
    simShrdPrm.setPrm[LpCnt].cust_mode = (UBYTE)CUST_NORMAL_BEHAVIOUR;
#endif /* TI_PS_FF_AT_P_CMD_CUST */
    simShrdPrm.setPrm[LpCnt].sat_cc_mode = SATCC_CONTROL_BY_SIM_ACTIVE;
  }

#ifdef TI_PS_FF_AT_P_CMD_CUST
  simShrdPrm.overall_cust_mode = (UBYTE)CUST_NORMAL_BEHAVIOUR;
#endif /* TI_PS_FF_AT_P_CMD_CUST */
  simShrdPrm.pb_stat = PB_STAT_Blocked;

#ifdef SIM_TOOLKIT

  for (cmd_src=CMD_SRC_LCL;cmd_src<CMD_SRC_MAX;cmd_src++)
  {
    simShrdPrm.SIMEFMode[cmd_src]=SIMEF_MODE_OFF;
  }
  for( idx = 0; idx < MAX_STK_PRF; idx++ )
  {
    INIT_SIM_SET_PARM( STKprof[idx], satDefPrfl[idx] );
  }

  if (init_type EQ ACI_INIT_TYPE_ALL)
  {
    if (!psaSAT_FURegister (cmhSIM_AD_Update))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_AD_Update() for FU");
    }
    if (!psaSAT_FURegister (cmhSIM_OpUpdate))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_OpUpdate() for FU");
    }
    if (!psaSAT_FURegister (cmhSIM_CSP_Update))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_CSP_Update() for FU");
    }
    if (!psaSAT_FURegister (cmhSIM_ONS_Update))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_ONS_Update() for FU");
    }
  }
  else
  {
    cmhSAT_CBMDestroyList();
  }
#endif

}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_shrPrmDump       |
+-------------------------------------------------------------------+

  PURPOSE : this function dumps the shared parameter to the debug
            output.
*/

#ifdef TRACING
GLOBAL void psaSIM_shrPrmDump ( void )
{
  char  lnBuf [80];             /* holds buffer for output line */
  char  pinBuf [PIN_LEN+1];     /* holds buffer for pin */
  SHORT chrNr;                  /* holds number of processed chars */

  /* --- PIN type -------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "  PIN type" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.setPrm[0].PINType );
  TRACE_EVENT( lnBuf );

  /* --- current PIN ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " curr. PIN" );
  sprintf( pinBuf, "%*.*s", PIN_LEN, PIN_LEN, simShrdPrm.setPrm[0].curPIN );
  chrNr += sprintf( lnBuf+chrNr, "%*.*s", ITM_WDT, ITM_WDT, pinBuf );
  TRACE_EVENT( lnBuf );

  /* --- new PIN --------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "   new PIN" );
  sprintf( pinBuf, "%*.*s", PIN_LEN, PIN_LEN, simShrdPrm.setPrm[0].newPIN );
  chrNr += sprintf( lnBuf+chrNr, "%*.*s", ITM_WDT, ITM_WDT, pinBuf );
  TRACE_EVENT( lnBuf );

  /* --- unblock key ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "unblck.key" );
  sprintf( pinBuf, "%*.*s", PIN_LEN, PIN_LEN, simShrdPrm.setPrm[0].unblkKey );
  chrNr += sprintf( lnBuf+chrNr, "%*.*s", ITM_WDT, ITM_WDT, pinBuf );
  TRACE_EVENT( lnBuf );

  /* --- PIN status -----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "PIN status" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.PINStat );
  TRACE_EVENT( lnBuf );

  /* --- result ---------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "    result" );
  chrNr += sprintf( lnBuf+chrNr, "%*X", ITM_WDT,
                                        simShrdPrm.rslt );
  TRACE_EVENT( lnBuf );

  /* --- PIN 1 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PIN 1 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pn1Cnt );
  TRACE_EVENT( lnBuf );

  /* --- PIN 2 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PIN 2 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pn2Cnt );
  TRACE_EVENT( lnBuf );

  /* --- PUK 1 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PUK 1 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pk1Cnt );
  TRACE_EVENT( lnBuf );

  /* --- PUK 2 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PUK 2 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pk2Cnt );
  TRACE_EVENT( lnBuf );

  /* --- card phase -----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "card phase" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.crdPhs );
  TRACE_EVENT( lnBuf );

  /* --- SIM status -----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "SIM status" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.SIMStat );
  TRACE_EVENT( lnBuf );

  /* --- card functionality ---------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "card funct" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.crdFun );
  TRACE_EVENT( lnBuf );
}
#endif  /* of #ifdef TRACING */

#ifdef SIM_PERS_OTA
/*
+----------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF       |
|                                 ROUTINE : aci_slock_ota_init       |
+----------------------------------------------------------+

  PURPOSE : this function registers the ccmhSIM_Register_Read_DCKduring init
      and also reads the contents of EF_DCK at the init
*/

/*
+------------------------------------------------------------------------------
|  Function    : aci_slock_ota_init
+------------------------------------------------------------------------------
|  Description : this function registers the ccmhSIM_Register_Read_DCKduring init
|      and also reads the contents of EF_DCK at the init
|
|  Parameters  : None
|
|  Return      : None
|
+------------------------------------------------------------------------------
*/

GLOBAL void aci_slock_ota_init()
{
  TRACE_FUNCTION("aci_slock_ota_init()");
  psaSAT_FURegister(cmhSIM_Register_Read_DCK);
}
#endif
/*==== EOF ========================================================*/