view src/g23m-aci/aci/psa_simf.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_SIMF
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the functions for the protocol
|             stack adapter for the subscriber identity module.
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_SIMF_C
#define PSA_SIMF_C
#endif

#include "aci_all.h"

#undef TRACING

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci.h"
#include "psa.h"
#include "psa_sim.h"
#include "psa_util.h"

#ifdef UART
#include "dti.h"
#include "dti_conn_mng.h"
#endif

#ifdef SIM_TOOLKIT
#include "psa_cc.h"
#include "psa_sat.h"
#include "aci_fd.h" /* necessary for cmh.h */
#include "cmh.h"    /* necessary for cmh_sat.h */
#include "cmh_sat.h"
#include "cmh_sim.h"
#endif /* SIM_TOOLKIT */

/*==== CONSTANTS ==================================================*/

#ifdef TRACING
#define ITM_WDT         (14)    /* item width in chars */
#define HDR_WDT         (10)    /* header width in chars */
#endif /* TRACING */

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : SAT                     |
|                                 ROUTINE : psaSIM_ChkSIMSrvSup     |
+-------------------------------------------------------------------+

  PURPOSE : Check if the SIM service is supported or not.

*/

GLOBAL BOOL psaSIM_ChkSIMSrvSup( UBYTE srvNr )
{
  srvNr--;

  if( srvNr/4 >= SRV_TAB_LEN ) return ( FALSE );

  if( ((simShrdPrm.srvTab[srvNr/4] >> ((srvNr%4)*2))&0x03) EQ
         SRV_ALLOC_ACTIV )

    return( TRUE );

  return( FALSE );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_atbNewEntry      |
+-------------------------------------------------------------------+

  PURPOSE : returns the access table index for an entry that is
            free to use. -1 indicates that the access table is full.
*/

GLOBAL SHORT psaSIM_atbNewEntry ( void )
{
  SHORT atbIdx;             /* holds access table index */

  for( atbIdx = 0; atbIdx < ACC_MAX; atbIdx++ )
  {
    if( simShrdPrm.atb[atbIdx].ntryUsdFlg EQ FALSE )
    {
      psaSIM_InitAtbNtry( atbIdx );

#if defined _SIMULATION_
      TRACE_EVENT_P1("SIM table ID = %d", atbIdx);
#endif
      return( atbIdx );
    }
  }

  TRACE_ERROR("[psaSIM_atbNewEntry]: did not find a new SIM table entry");
  return( -1 );
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_CloseAtb         |
+-------------------------------------------------------------------+

  PURPOSE : close all ATB entries with the provided SIM error code.

*/

GLOBAL void psaSIM_CloseAtb ( USHORT error )
{
  int atbIdx;             /* holds access table index */

  for( atbIdx = 0; atbIdx < ACC_MAX; atbIdx++ )
  {
    if( simShrdPrm.atb[atbIdx].ntryUsdFlg )
    {
      simShrdPrm.atb[atbIdx].errCode = error;

      if( simShrdPrm.atb[atbIdx].rplyCB )
        simShrdPrm.atb[atbIdx].rplyCB( (SHORT)atbIdx );

      simShrdPrm.atb[atbIdx].ntryUsdFlg = FALSE;
    }
  }
}
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_InitAtbNtry      |
+-------------------------------------------------------------------+

  PURPOSE : initialize the indexed access table entry.

*/

GLOBAL void psaSIM_InitAtbNtry ( SHORT idx )
{

/*
 *-------------------------------------------------------------------
 * initialize access table entry
 *-------------------------------------------------------------------
 */
  simShrdPrm.atb[idx].ntryUsdFlg  = FALSE;
  simShrdPrm.atb[idx].accType     = NO_VLD_ACT;
  simShrdPrm.atb[idx].v_path_info = FALSE;
  simShrdPrm.atb[idx].reqDataFld  = 0;
  simShrdPrm.atb[idx].dataOff     = 0;
  simShrdPrm.atb[idx].recNr       = 0;
  simShrdPrm.atb[idx].check_dataLen = FALSE;  /* in case of read record operation,
     datalen passed to SIM in the rquest will always be 0xFF. However when a buffer
     has been passed, the size of data received from SIM to be copied in it has to
     be checked...*/
  simShrdPrm.atb[idx].dataLen     = 0;
  simShrdPrm.atb[idx].exchData    = NULL;
  simShrdPrm.atb[idx].recMax      = 0;
  simShrdPrm.atb[idx].errCode     = SIM_NO_ERROR;
  simShrdPrm.atb[idx].rplyCB      = NULL;
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_cnvrtIMSI2ASCII  |
+-------------------------------------------------------------------+

  PURPOSE : converts the IMSI into ASCII representation and returns
            pointer to IMSI ASCII string.
*/

GLOBAL CHAR* psaSIM_cnvrtIMSI2ASCII ( CHAR * imsiBuf )
{
  psaSIM_decodeIMSI (  simShrdPrm.imsi.field, 
                       simShrdPrm.imsi.c_field, 
                       imsiBuf);
  return( imsiBuf );
}


/*
  PURPOSE : convert imsi (packed bcd to ASCIIZ; ->11.11)
*/
GLOBAL void psaSIM_decodeIMSI (UBYTE* imsi_field, 
                               UBYTE  imsi_c_field, 
                               CHAR* imsi_asciiz)
{
  UBYTE imsi_len;
  UBYTE i;
  UBYTE digit;

  TRACE_FUNCTION ("aci_slock_sim_decodeIMSI()");

  /*
                     | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
                     +---+---+---+---+---+---+---+---+
     imsi_c_field  = |         Length indicator      |
     imsi_field[0] = | IMSI digit 1  | p | 0 | 0 | 1 |
     imsi_field[1] = | IMSI digit 3  | IMSI digit 2  |
                    

     imsi_c_field = length indicator:
                    The length indicator refers to the number of significant bytes,
                    not including this length byte, required for the IMSI.
     p = parity
         0: Even number of IMSI digits
         1: Odd number of IMSI digits

     If the number of IMSI digits is even then bits 5 to 8 of the last octet
     shall be filled with an end mark coded as 1111b
   */

  /*
   * Check length
   */
  if ((imsi_c_field EQ 0) OR (imsi_c_field > (MAX_IMSI-1)))  /* maybe 0xFF on some testcards */
  {
    TRACE_EVENT_P1("[WRN] imsi_c_field = %d is not valid", imsi_c_field);
    imsi_asciiz[0] = '\0';    /* return empty string in case of error */
    return;
  }

  /*
   * calculate number of digits
   */
  imsi_len = (imsi_c_field)*2-1;   /* -1 goes off for parity nibble */

  /*
   * if even number of digits then last upper nibble is an end mark '1111'
   */
  if ((imsi_field[0] & 0x08) EQ 0)
  {
    imsi_len--;
  }

  /*
   * extract all digits
   */
  for (i=0; i<imsi_len; i++)
  {
    if ((i & 1) EQ 0)
    {
      /* process IMSI digit 1,3,5,... at i=0,2,4,...*/
      digit = (imsi_field[(i+1)/2] & 0xf0) >> 4;   /* +1 is to skip parity nibble */
    }
    else
    {
      /* process IMSI digit 2,4,6,... at i=1,3,5,...*/
      digit = (imsi_field[(i+1)/2] & 0x0f); 
    }

    if (digit > 9)  /* 3.03/2.3 IMSI shall consist of numerical characters (0 through 9) only.*/
    {
      TRACE_EVENT("[WRN] invalid BCD digit found in IMSI, aborting");
      imsi_asciiz[0] = '\0';    /* return empty string in case of error */
      return;
    }
    else
    {
      imsi_asciiz[i] = '0' + digit;
    }
  }
  imsi_asciiz[i] = '\0';
  return;
}

/*
  PURPOSE : convert imsi (ASCIIZ to packed bcd; ->11.11)
*/
GLOBAL void psaSIM_encodeIMSI (CHAR* imsi_asciiz, 
                               UBYTE* imsi_c_field, 
                               UBYTE* imsi_field)
{
  UBYTE i;
  UBYTE digit;
  UBYTE imsi_len;

  TRACE_FUNCTION ("aci_slock_sim_encodeIMSI()");
  imsi_len = strlen(imsi_asciiz);
  if (imsi_len > 15) /* 3.03/2.3 The overall number of digits in IMSI shall not exceed 15 digits. */
  {
    TRACE_EVENT_P1("[WRN] imsi_len shall not exceed 15 digits, but is %d, truncating!", imsi_len);
    imsi_len = 15;
  }

  /* Calculate the Length indicator */
  *imsi_c_field = (imsi_len+1+1)/2;          /* +1 for parity nibble and +1 to round up */
  imsi_field[0] = (imsi_len%2 ? 0x09:0x01);  /* fill parity and some default bits */
  for (i=0; i<MAX_IMSI_LEN; i++)             /* fill the whole EF field, pad remaining with 0xf */
  {
    if (i<imsi_len)
    {
      digit = imsi_asciiz[i];
      if (digit >= '0' OR digit <= '9')
      {
        digit-= '0';
      }
      else
      {
        TRACE_EVENT_P1("[WRN] invalid digit in IMSI \"%d\", skipping!", digit);
        digit = 0x0f;
      }
    }
    else
    {
      digit = 0x0f;   /* 11.11/10.3.2 If a network operator chooses an IMSI of less than 15 digits,
                          unused nibbles shall be set to 'F'. */
    }

    if ((i & 1) EQ 0)
    {
      /* process IMSI digit 1,3,5,... at i=0,2,4,...*/
      imsi_field[(i+1)/2] |= digit << 4;           /* first +1 is to skop parity nibble */
    }
    else
    {
      /* process IMSI digit 2,4,6,... at i=1,3,5,...*/
      imsi_field[(i+1)/2]  = digit;
    }
  }
}




/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIM                 |
|                                 ROUTINE : psaSIM_Init             |
+-------------------------------------------------------------------+

  PURPOSE : initialize the protocol stack adapter for SIM.

*/

/* MACRO: initializer for set parameter */
#define INIT_SIM_SET_PARM( dest, def )\
  for( LpCnt = 0; LpCnt < OWN_SRC_MAX; LpCnt++ )\
    simShrdPrm.setPrm[LpCnt].dest = def

GLOBAL void psaSIM_Init (T_ACI_INIT_TYPE init_type)
{
  UBYTE LpCnt;          /* holds loop counter for macro */
  UBYTE atbIdx;         /* holds index to access table */

#ifdef SIM_TOOLKIT
  T_ACI_CMD_SRC cmd_src;  /* for setting up SIMEF mode */
  UBYTE idx;            /* holds profile index */
#endif

/*
 *-------------------------------------------------------------------
 * initialize access table
 *-------------------------------------------------------------------
 */
  for( atbIdx = 0; atbIdx < ACC_MAX; atbIdx++ )
  {
    psaSIM_InitAtbNtry( atbIdx );
  }

/*
 *-------------------------------------------------------------------
 * set default parms
 *-------------------------------------------------------------------
 */
  memset( simShrdPrm.setPrm, 0, sizeof(T_SIM_SET_PRM));
  memset( simShrdPrm.imsi.field, 0, MAX_IMSI);
  simShrdPrm.rslt          = SIM_NO_ERROR;
  simShrdPrm.pn1Cnt        = 0;
  simShrdPrm.pn2Cnt        = 0;
  simShrdPrm.pk1Cnt        = 0;
  simShrdPrm.pk2Cnt        = 0;
  simShrdPrm.PINStat       = NO_VLD_PS;
  simShrdPrm.pn1Stat       = NO_VLD_PS;
  simShrdPrm.pn2Stat       = NO_VLD_PS;
  simShrdPrm.PINQuery      = 0;
  simShrdPrm.crdPhs        = 0xFF;
  simShrdPrm.SIMStat       = NO_VLD_SS;
  simShrdPrm.PEDStat       = NO_VLD_PEDS;
  simShrdPrm.imsi.c_field  = 0;
  simShrdPrm.PLMN_Mode_Bit = NOT_PRESENT_8BIT;
  simShrdPrm.crdFun        = SIM_NO_OPERATION;
  simShrdPrm.ciSIMEnabled  = TRUE;
  simShrdPrm.imei_blocked  = FALSE;
  simShrdPrm.opl_list.opl_status = FALSE;
  simShrdPrm.pnn_list.pnn_status = FALSE;
  memset( simShrdPrm.srvTab, 0, SRV_TAB_LEN );
#ifdef FF_SAT_E
  simShrdPrm.sat_class_e_dti_id = DTI_DTI_ID_NOTPRESENT;
#endif /*FF_SAT_E*/
#ifdef TI_PS_FF_AT_P_CMD_ATR
  simShrdPrm.atr.len       = 0;
#endif /* TI_PS_FF_AT_P_CMD_ATR */
#ifdef FF_DUAL_SIM
  simShrdPrm.SIM_Powered_on = 0;
  simShrdPrm.SIM_Selection = FALSE;
#endif /*FF_DUAL_SIM*/
  INIT_SIM_SET_PARM( actProc,    SIM_INITIALISATION );
  INIT_SIM_SET_PARM( PINType,    0 );
  
  for( LpCnt = 0; LpCnt < OWN_SRC_MAX; LpCnt++ )
  {
    memset( simShrdPrm.setPrm[LpCnt].curPIN, NOT_PRESENT_CHAR, PIN_LEN );
    memset( simShrdPrm.setPrm[LpCnt].newPIN, NOT_PRESENT_CHAR, PIN_LEN );
    memset( simShrdPrm.setPrm[LpCnt].unblkKey, NOT_PRESENT_CHAR, PUK_LEN );

#ifdef TI_PS_FF_AT_P_CMD_CUST
    simShrdPrm.setPrm[LpCnt].cust_mode = (UBYTE)CUST_NORMAL_BEHAVIOUR;
#endif /* TI_PS_FF_AT_P_CMD_CUST */
    simShrdPrm.setPrm[LpCnt].sat_cc_mode = SATCC_CONTROL_BY_SIM_ACTIVE;
  }

#ifdef TI_PS_FF_AT_P_CMD_CUST
  simShrdPrm.overall_cust_mode = (UBYTE)CUST_NORMAL_BEHAVIOUR;
#endif /* TI_PS_FF_AT_P_CMD_CUST */
  simShrdPrm.pb_stat = PB_STAT_Blocked;

#ifdef SIM_TOOLKIT

  for (cmd_src=CMD_SRC_LCL;cmd_src<CMD_SRC_MAX;cmd_src++)
  {
    simShrdPrm.SIMEFMode[cmd_src]=SIMEF_MODE_OFF;
  }
  for( idx = 0; idx < MAX_STK_PRF; idx++ )
  {
    INIT_SIM_SET_PARM( STKprof[idx], satDefPrfl[idx] );
  }

  if (init_type EQ ACI_INIT_TYPE_ALL)
  {
    if (!psaSAT_FURegister (cmhSIM_AD_Update))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_AD_Update() for FU");
    }
    if (!psaSAT_FURegister (cmhSIM_OpUpdate))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_OpUpdate() for FU");
    }
    if (!psaSAT_FURegister (cmhSIM_CSP_Update))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_CSP_Update() for FU");
    }
    if (!psaSAT_FURegister (cmhSIM_ONS_Update))
    {
      TRACE_EVENT ("FAILED to register the handler cmhSIM_ONS_Update() for FU");
    }
  }
  else
  {
    cmhSAT_CBMDestroyList();
  }
#endif

}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF                |
|                                 ROUTINE : psaSIM_shrPrmDump       |
+-------------------------------------------------------------------+

  PURPOSE : this function dumps the shared parameter to the debug
            output.
*/

#ifdef TRACING
GLOBAL void psaSIM_shrPrmDump ( void )
{
  char  lnBuf [80];             /* holds buffer for output line */
  char  pinBuf [PIN_LEN+1];     /* holds buffer for pin */
  SHORT chrNr;                  /* holds number of processed chars */

  /* --- PIN type -------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "  PIN type" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.setPrm[0].PINType );
  TRACE_EVENT( lnBuf );

  /* --- current PIN ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " curr. PIN" );
  sprintf( pinBuf, "%*.*s", PIN_LEN, PIN_LEN, simShrdPrm.setPrm[0].curPIN );
  chrNr += sprintf( lnBuf+chrNr, "%*.*s", ITM_WDT, ITM_WDT, pinBuf );
  TRACE_EVENT( lnBuf );

  /* --- new PIN --------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "   new PIN" );
  sprintf( pinBuf, "%*.*s", PIN_LEN, PIN_LEN, simShrdPrm.setPrm[0].newPIN );
  chrNr += sprintf( lnBuf+chrNr, "%*.*s", ITM_WDT, ITM_WDT, pinBuf );
  TRACE_EVENT( lnBuf );

  /* --- unblock key ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "unblck.key" );
  sprintf( pinBuf, "%*.*s", PIN_LEN, PIN_LEN, simShrdPrm.setPrm[0].unblkKey );
  chrNr += sprintf( lnBuf+chrNr, "%*.*s", ITM_WDT, ITM_WDT, pinBuf );
  TRACE_EVENT( lnBuf );

  /* --- PIN status -----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "PIN status" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.PINStat );
  TRACE_EVENT( lnBuf );

  /* --- result ---------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "    result" );
  chrNr += sprintf( lnBuf+chrNr, "%*X", ITM_WDT,
                                        simShrdPrm.rslt );
  TRACE_EVENT( lnBuf );

  /* --- PIN 1 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PIN 1 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pn1Cnt );
  TRACE_EVENT( lnBuf );

  /* --- PIN 2 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PIN 2 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pn2Cnt );
  TRACE_EVENT( lnBuf );

  /* --- PUK 1 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PUK 1 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pk1Cnt );
  TRACE_EVENT( lnBuf );

  /* --- PUK 2 count ----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " PUK 2 cnt" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.pk2Cnt );
  TRACE_EVENT( lnBuf );

  /* --- card phase -----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "card phase" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.crdPhs );
  TRACE_EVENT( lnBuf );

  /* --- SIM status -----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "SIM status" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.SIMStat );
  TRACE_EVENT( lnBuf );

  /* --- card functionality ---------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "card funct" );
  chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT,
                                         simShrdPrm.crdFun );
  TRACE_EVENT( lnBuf );
}
#endif  /* of #ifdef TRACING */

#ifdef SIM_PERS_OTA
/*
+----------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_SIMF       |
|                                 ROUTINE : aci_slock_ota_init       |
+----------------------------------------------------------+

  PURPOSE : this function registers the ccmhSIM_Register_Read_DCKduring init
      and also reads the contents of EF_DCK at the init
*/

/*
+------------------------------------------------------------------------------
|  Function    : aci_slock_ota_init
+------------------------------------------------------------------------------
|  Description : this function registers the ccmhSIM_Register_Read_DCKduring init
|      and also reads the contents of EF_DCK at the init
|
|  Parameters  : None
|
|  Return      : None
|
+------------------------------------------------------------------------------
*/

GLOBAL void aci_slock_ota_init()
{
  TRACE_FUNCTION("aci_slock_ota_init()");
  psaSAT_FURegister(cmhSIM_Register_Read_DCK);
}
#endif
/*==== EOF ========================================================*/