FreeCalypso > hg > fc-tourmaline
view src/cs/services/atp/atp_config.h @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 21:55:13 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/******************************************************************************* * * File Name : atp_config.h * * Configuration setting of ATP SW entity * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 Date : 28-Feb-2000 * * History : 0.1 - Created by E. Baissus * * * Author : Eric Baissus : e-baissus@ti.com * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved ******************************************************************************/ #ifndef ATP_CONFIG_H #define ATP_CONFIG_H #include "atp/atp_pool_size.h" /* Stack & Memory Bank sizes definitions */ /* Maximum number of SW entity which can register simultaneously register to the ATP SW entity */ #define ATP_MAX_NB_SW_ENTITY 10 // This does not includes GSM SW entity #define ATP_SW_ENTITY_NAME_MAX_CARAC 10 #define ATP_SPP_MAX_PENDING_PORT 10 /* Maximum number of port which can be in open port pending state at the same time Note that a port is considered to be in pending state when in server mode */ #define ATP_HSG_NAME "HSG" /* Sw entity name : used to register to ATP the HSG*/ #define ATP_GSM_NAME "GSM" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_SPP_NAME "SPP" /* Sw entity name : used to register to ATP the SPP */ #define ATP_HS_NAME "HS" /* Sw entity name : used to register to ATP the HS */ #define ATP_AAA_NAME "AAA" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_DEFAULT_GSM_MAX_PACKET_SIZE (1500) // Default value indicating the maximum size that is supported // when GSM sends a packet to ATP #define ATP_MAX_NB_OF_PORT_SUPPORTED_BY_GSM (3) #define ATP_MAX_CMD_LENGTH (0xFF) // Maximum length of a command handled by ATP /* Configuration parameters for environment */ #define ATP_MB_PRIM_SIZE ATP_MB1_SIZE #define ATP_MB_PRIM_WATERMARK (ATP_MB_PRIM_SIZE - 1000) /* ** This def is in rvm_priorities.h ** #define ATP_SWE_LEVEL (4); // SHOULD BE DEFINED IN RVM_PRIORITIES.H !!! */ #endif