FreeCalypso > hg > fc-tourmaline
view src/cs/services/atp/atp_config.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/******************************************************************************* * * File Name : atp_config.h * * Configuration setting of ATP SW entity * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 Date : 28-Feb-2000 * * History : 0.1 - Created by E. Baissus * * * Author : Eric Baissus : e-baissus@ti.com * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved ******************************************************************************/ #ifndef ATP_CONFIG_H #define ATP_CONFIG_H #include "atp/atp_pool_size.h" /* Stack & Memory Bank sizes definitions */ /* Maximum number of SW entity which can register simultaneously register to the ATP SW entity */ #define ATP_MAX_NB_SW_ENTITY 10 // This does not includes GSM SW entity #define ATP_SW_ENTITY_NAME_MAX_CARAC 10 #define ATP_SPP_MAX_PENDING_PORT 10 /* Maximum number of port which can be in open port pending state at the same time Note that a port is considered to be in pending state when in server mode */ #define ATP_HSG_NAME "HSG" /* Sw entity name : used to register to ATP the HSG*/ #define ATP_GSM_NAME "GSM" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_SPP_NAME "SPP" /* Sw entity name : used to register to ATP the SPP */ #define ATP_HS_NAME "HS" /* Sw entity name : used to register to ATP the HS */ #define ATP_AAA_NAME "AAA" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_DEFAULT_GSM_MAX_PACKET_SIZE (1500) // Default value indicating the maximum size that is supported // when GSM sends a packet to ATP #define ATP_MAX_NB_OF_PORT_SUPPORTED_BY_GSM (3) #define ATP_MAX_CMD_LENGTH (0xFF) // Maximum length of a command handled by ATP /* Configuration parameters for environment */ #define ATP_MB_PRIM_SIZE ATP_MB1_SIZE #define ATP_MB_PRIM_WATERMARK (ATP_MB_PRIM_SIZE - 1000) /* ** This def is in rvm_priorities.h ** #define ATP_SWE_LEVEL (4); // SHOULD BE DEFINED IN RVM_PRIORITIES.H !!! */ #endif